GOST
10 April 2017, 14:17
3111
3112
3113
Features:
Propietary RIGIDRAIL™ rail design to balance between light weight and strength/rigidity
Partial Picatinny Top Rail (Matching BAD556-LW Lightweight Upper Receiver)
Material: Aircraft Grade 6061-T6 Aluminum
Overall Length: 15"
Inner Diameter: 1.315"
M-LOK Slots at 3, 6, 9, and partial 12 o'lock positions
Additional Single M-LOK Slots at (4) 45° Positions for Forward Mounting Light, Laser, etc.
Barrel Nut Diameter: 1.378"
Barrel Nut: 7075 Aluminum Type 3 Class 2 Hard Anodized Clear (Bronze finish)
Weight: 9.6 oz with Barrel Nut and Mounting Hardware
Internal diameter: 1.34"
Rotation limited QD sockets
Finish: Mil-Spec Type 3 Class 2 Hard-coat Anodized
Made in the USA!
$259.95
Barrel Nut Wrench Included
No Barrel Nut Shims Required for Installation
17-4PH Cored Stainless Steel Rail Mounting Attachment - Patent Pending by CMT
(4) Anti Rotation QD Sling Sockets: (2) at front and (2) at rear. 3 o'clock & 9 o'lock Positions
Tapped Hole at Front End for Optional Bipod/Sling Attache Point at 6 o'clock Postion
No Contact with Gas Tube
Compatible with most Low Profile Gas Blocks
http://www.battlearmsdevelopment.com/battlearms-rigidrailtm-15-m-lok
https://www.rainierarms.com/battle-arms-development-rigidrail-mlock-handguard-15
3112
3113
Features:
Propietary RIGIDRAIL™ rail design to balance between light weight and strength/rigidity
Partial Picatinny Top Rail (Matching BAD556-LW Lightweight Upper Receiver)
Material: Aircraft Grade 6061-T6 Aluminum
Overall Length: 15"
Inner Diameter: 1.315"
M-LOK Slots at 3, 6, 9, and partial 12 o'lock positions
Additional Single M-LOK Slots at (4) 45° Positions for Forward Mounting Light, Laser, etc.
Barrel Nut Diameter: 1.378"
Barrel Nut: 7075 Aluminum Type 3 Class 2 Hard Anodized Clear (Bronze finish)
Weight: 9.6 oz with Barrel Nut and Mounting Hardware
Internal diameter: 1.34"
Rotation limited QD sockets
Finish: Mil-Spec Type 3 Class 2 Hard-coat Anodized
Made in the USA!
$259.95
Barrel Nut Wrench Included
No Barrel Nut Shims Required for Installation
17-4PH Cored Stainless Steel Rail Mounting Attachment - Patent Pending by CMT
(4) Anti Rotation QD Sling Sockets: (2) at front and (2) at rear. 3 o'clock & 9 o'lock Positions
Tapped Hole at Front End for Optional Bipod/Sling Attache Point at 6 o'clock Postion
No Contact with Gas Tube
Compatible with most Low Profile Gas Blocks
http://www.battlearmsdevelopment.com/battlearms-rigidrailtm-15-m-lok
https://www.rainierarms.com/battle-arms-development-rigidrail-mlock-handguard-15