PDA

View Full Version : NFA Picture Thread



Pages : 1 [2] 3 4 5 6 7 8 9 10

gatordev
2 January 2014, 17:13
Couldn't decide between this thread or the Colt thread, but here it goes...

http://i840.photobucket.com/albums/zz322/gatordev/DSC02122_zpsb573a6d4.jpg

http://i840.photobucket.com/albums/zz322/gatordev/DSC02127_zps68ed12f1.jpg

MoxyDave
2 January 2014, 20:39
Shooting Wolf ammo suppressed, carbon builds up awful fast. Fortunately Nickel-Boron makes cleanup easy [:)]

Rainier Arms UltraMatch billet upper (http://www.rainierarms.com/?page=shop/detail&product_id=1611), Larue 9" handguard (http://www.laruetactical.com/larue-tactical-90-handguard-lt15-9), Noveske Crusader 12.5" stainless barrel (http://www.midwayusa.com/product/561572/noveske-crusader-match-barrel-ar-15-pistol-556x45mm-nato-medium-contour-1-in-7-twist-125-stainless-steel-with-low-profile-gas-block), PRI Gas Buster charging handle (http://www.precisionreflex.com/Detail.aspx?PROD=186694), FailZero NIB BCG (http://www.failzero.com/armory/m164-rifle-kits.html), GemTech M402 Silencer (http://www.gem-tech.com/store/pc/5-56-MM-c9.htm), Aimpoint Comp M4 2MOA sight (http://www.rainierarms.com/?page=shop/detail&product_id=959), Fenix L1T (http://www.amazon.com/Fenix-Level-High-Performance-Flashlight/dp/B001GAOOFA/ref=cm_cr_pr_product_top) in Gear Sector mount (https://www.rainierarms.com/?page=shop/detail&product_id=1862)

I love this upper and bolt group combination. The more it's shot the smoother it gets. After cleanup the bolt runs like it's on glass.

https://dl.dropboxusercontent.com/u/44963125/Hosted%20Photos/WEVO/Rifles/_MG_2249b.jpg

AaronP220
21 January 2014, 12:43
Osprey
http://i.imgur.com/guKZQfm.jpg

M4-2000 / 762-SDN-6 both 14.5 guns.
http://i.imgur.com/1V7MRY8.jpg

knedrgr
5 February 2014, 18:09
G17 SBR with Hera Arms GCC stock kit.

http://i590.photobucket.com/albums/ss343/urbanguerillaclothing/UGC_Pew-Pew-G17-SBR.jpg

knedrgr
6 February 2014, 16:16
http://i590.photobucket.com/albums/ss343/urbanguerillaclothing/UGC_G17-SBR-and-G19L.jpg

UWone77
9 February 2014, 23:13
Surefire SOCOM Suppressor approved.


http://i849.photobucket.com/albums/ab55/UWone77/IMG_1490_zps6f678f60.jpg (http://s849.photobucket.com/user/UWone77/media/IMG_1490_zps6f678f60.jpg.html)

Jerry R
10 February 2014, 08:15
Tac-Sol with Prodigy - I was surprised that it did not affect POI.

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/Ruger%2022-45%20with%20Tac-Sol/IMG_2319Tac-SolSuppressedFramedWatermarked_zps8b120957.jpg~ori ginal

gatordev
10 February 2014, 17:06
Surefire SOCOM Suppressor approved.



Is it me, or was that pretty quick? ~Sep to Feb? If you tell me eForm, I'm going to go kill a kitten. When I went to do my paperwork for my 762 SOCOM, Gun Gallery said they didn't do eForms yet, which I found ironic since the owner is on AR15.com all the time.

UWone77
13 February 2014, 00:55
Is it me, or was that pretty quick? ~Sep to Feb? If you tell me eForm, I'm going to go kill a kitten. When I went to do my paperwork for my 762 SOCOM, Gun Gallery said they didn't do eForms yet, which I found ironic since the owner is on AR15.com all the time.

Sorry to burst your bubble ... ;)

But this was my 556 SOCOM Can that I submitted March 2013. I guess the kittens will be saved for another day. 762 SOCOM is still in jail.

baboon
13 February 2014, 04:03
http://imagizer.imageshack.us/v2/800x600q90/32/3ial.JPG (https://imageshack.com/i/0w3ialJ)
My new Colt R0923 CQB upper.

gatordev
13 February 2014, 16:02
I guess the kittens will be saved for another day. 762 SOCOM is still in jail.

I'll let PETA know you've done your part today.

GOST
14 February 2014, 04:16
Sorry to burst your bubble ... ;)

But this was my 556 SOCOM Can that I submitted March 2013. I guess the kittens will be saved for another day. 762 SOCOM is still in jail.

Best friend also has a dislike of kittens. Now his girlfriend has 4 cats in his house. He now wears a disgusted look on his face.

UWone77
15 February 2014, 00:19
http://i849.photobucket.com/albums/ab55/UWone77/IMG_1523_zps226afaf6.jpg (http://s849.photobucket.com/user/UWone77/media/IMG_1523_zps226afaf6.jpg.html)

UWone77
8 March 2014, 11:04
In celebration of Washington State allowing SBR's... a 300 BLK barrel on an Aero Precision COP Upper

http://i849.photobucket.com/albums/ab55/UWone77/IMG_1509_zps8c01dbdb.jpg (http://s849.photobucket.com/user/UWone77/media/IMG_1509_zps8c01dbdb.jpg.html)

Jerry R
21 March 2014, 17:17
Another shot of the Poseidon

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/Thompson-Machine%20Poseidon%2045%20Suppressor/IMG_2527SigwithPoseidonSize1024_zpse3d3a9a6.jpg~or iginal

FortTom
21 March 2014, 17:26
Hey, if you don't have any use for those dead kittens, I'll take 'em....[BD] and pay shipping....

FT

tact
21 March 2014, 20:18
http://img.tapatalk.com/d/14/03/22/anesuzy9.jpg

gatordev
17 April 2014, 14:20
Thanks to folks like UWone for sharing some pics, I finally decided on the rail for my 12.5" project. I was playing with some DoF shots but didn't have a great place to shoot the rifle, so they didn't turn out all that great. Still, it's finished. I have tomorrow off but the damn range is closed through the weekend. Hope to shoot it soon.

http://i840.photobucket.com/albums/zz322/gatordev/12%20point%205/125profilenoflash_zps831a3b6a.jpg

http://i840.photobucket.com/albums/zz322/gatordev/12%20point%205/e4b431bc-003a-4ce3-8b7e-0c0ec631342b_zps8d835b10.jpg

http://i840.photobucket.com/albums/zz322/gatordev/12%20point%205/125opticFocus_zps7a2eb19a.jpg

FortTom
17 April 2014, 17:19
Gatordev,
Nice rifle. What RDS is that?

FT

GOST
18 April 2014, 01:25
Looks like a T1 with a IQ cover maybe.

gatordev
18 April 2014, 12:57
Thanks! Correct, T1 with an IO cover on a DD fixed lower 1/3rd mount.

Ast
18 April 2014, 15:25
http://i882.photobucket.com/albums/ac24/boody011/IMG_7027_zpsb396266a.jpg (http://s882.photobucket.com/user/boody011/media/IMG_7027_zpsb396266a.jpg.html)

UWone77
19 April 2014, 00:17
Pic fixed for you.

Jerry R
19 April 2014, 08:08
http://i882.photobucket.com/albums/ac24/boody011/IMG_7027_zpsb396266a.jpg (http://s882.photobucket.com/user/boody011/media/IMG_7027_zpsb396266a.jpg.html)

Nice Stick Ast - the ribs on the magazine look like it's 6.8 SPC

Ast
19 April 2014, 10:31
UWone77 thanks for fixing the picture. Apparently I'm not too good at posting them. Jerry, it's a 556--Noveske Mk18 upper on a Rainier Arms lower.

Jerry R
19 April 2014, 17:31
Thanks, re-thought that comment. DPMS makes ribbed 556 mags. In the pic it looked like my Barrett mags.

DMViergever
1 May 2014, 11:56
http://i702.photobucket.com/albums/ww27/DMViergever/IMG_4719_zpswlqcbtki.jpg
http://i702.photobucket.com/albums/ww27/DMViergever/IMG_4727_zpsbcf32228.jpg
http://i702.photobucket.com/albums/ww27/DMViergever/IMG_4606_zps6c770aca.jpg

DMViergever
1 May 2014, 11:58
Hmm...none of those transferred over real well. All fuzzy

UWone77
1 May 2014, 18:59
Griffin makes some underrated stuff. I might have to finally pull the trigger on one of their cans.

DMViergever
2 May 2014, 07:37
You bet they are excellent cans for certain.

Jerry R
10 May 2014, 13:27
LWRC 10.5" 6.8 SPC With the Tactical Tailor belt

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/IMG_0100_1_2_fusedHDRToneMapNaturalSize1024_zps308 bad1e.jpg~original

LanceCriminal
23 June 2014, 07:40
Updated NFA Family! WIP Mk12 Mod 0, and 12.5" "CQBR Block II Inspired" SBR

https://farm3.staticflickr.com/2845/13572804333_332fa38893_b.jpg (https://www.flickr.com/photos/100565977@N03/13572804333/)

UWone77
23 June 2014, 19:42
Updated NFA Family! WIP Mk12 Mod 0, and 12.5" "CQBR Block II Inspired" SBR

https://farm3.staticflickr.com/2845/13572804333_332fa38893_b.jpg (https://www.flickr.com/photos/100565977@N03/13572804333/)

Beautiful weapons...


Pic thread:

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_1980_zpsc537be54.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_1980_zpsc537be54.jpg.html)

mustangfreek
24 June 2014, 03:06
Some nice stuff in this thread, was bored , up late drinking mountain dew and went thru the whole thread..\

i have no NFA goodies, but plan to jump in hopefully starting the end of the year and want to Form 1 a AR lower and my M92 AK pistol and then .22 can and probably a .308 can for 556/308 and if i ever get crazy would also work for the blackout.....Just $$$$$$....lol

LanceCriminal
3 July 2014, 20:17
https://farm4.staticflickr.com/3839/14382796069_ec3542b92d_b.jpg (https://flic.kr/p/nUXAbz)SPR Front (https://flic.kr/p/nUXAbz) by LanceCriminal86 (https://www.flickr.com/people//), on Flickr

https://farm3.staticflickr.com/2916/14566025331_c998bc33df_b.jpg (https://flic.kr/p/oc9FRM)SPR/M4 and MITER Mount (https://flic.kr/p/oc9FRM) by LanceCriminal86 (https://www.flickr.com/people//), on Flickr

https://farm3.staticflickr.com/2928/14589486053_33ff10b63b_b.jpg (https://flic.kr/p/oedVUZ)Inside AAC SPR/M4 (https://flic.kr/p/oedVUZ) by LanceCriminal86 (https://www.flickr.com/people//), on Flickr

https://farm4.staticflickr.com/3887/14569403895_47a5a36f3c_b.jpg (https://flic.kr/p/ocs1bT)Latch and FSB (https://flic.kr/p/ocs1bT) by LanceCriminal86 (https://www.flickr.com/people//), on Flickr

UWone77
4 July 2014, 12:34
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2032_zps31f6c713.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2032_zps31f6c713.jpg.html)

TripleBravo
5 July 2014, 20:18
https://farm6.staticflickr.com/5528/14539675596_fa8492d667_o.jpg (https://flic.kr/p/o9PD11)Griffin Industries HMMS (https://flic.kr/p/o9PD11) by Triple Bravo (https://www.flickr.com/people//), on Flickr

TripleBravo
5 July 2014, 20:19
https://farm4.staticflickr.com/3871/14419787185_00d27497dd_o.jpg (https://flic.kr/p/nYebmr)Ferfrans Modular Muzzle Device (https://flic.kr/p/nYebmr) by Triple Bravo (https://www.flickr.com/people//), on Flickr

rob_s
11 July 2014, 11:47
http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/6933-02.jpg


Allow myself to quote... myself.

The above gun had done through some changes. Furniture went all MOE, Redimag went away. Now it's here. I need to find the Surefire FH I have sitting around someplace and this gun will get either my TA33 from another gun or it'll get it's own PRO.

http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/photo_zps537ee020.jpg

GOST
11 July 2014, 23:05
Very nice Rob. How you liking your LWRC stock?

rob_s
12 July 2014, 06:48
I haven't actually shot with it yet, as I was waiting to get this upper together. The barrel nut was a mother-grabber. Worst I'd ever dealt with. Had to cut off the delta ring, then rounded off all the teeth with the barrel but wrench and a pipe extension, then finally broke it loose with a pipe wrench and a 2"x2' piece of pipe to extend that! Tried heat, cold, PB blasted the crap out of it... Nothing.

Anyway, I like the feel of the stock so far, but I need to get it to the range for my misted-hated activity... Zeroing.

GOST
12 July 2014, 07:21
It's always a blast when you know you have to get the breaker bar out. Is an A2 going on it?

gatordev
19 July 2014, 13:54
Just a crummy iPhone pic. I always seem to have the finish come out much brighter than it actually is, even after a little post-processing.

http://i840.photobucket.com/albums/zz322/gatordev/Public%20pics/MK18ammocan_zpsb7c615c1.jpg

gatordev
26 August 2014, 17:14
Since the watch thread has been going on a few days...

http://i840.photobucket.com/albums/zz322/gatordev/Public%20pics/photo1_zps22186fd4.jpg

UWone77
27 August 2014, 07:43
Very Nice Gator! You and I have the same tastes in gear.

UWone77
29 August 2014, 06:32
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2284_zps93ae602e.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2284_zps93ae602e.jpg.html)

Computalotapus
29 August 2014, 06:41
That's hawt

KevinBLC
29 August 2014, 19:59
Allow myself to quote... myself.

The above gun had done through some changes. Furniture went all MOE, Redimag went away. Now it's here. I need to find the Surefire FH I have sitting around someplace and this gun will get either my TA33 from another gun or it'll get it's own PRO.

http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/photo_zps537ee020.jpg

That's a sweet rig right there.

Rob, I thought I read on m4carbine you always recommended Aimpoint C3's. Are you not a reddot guy anymore? Or just find the irons lighter/faster.

UWone77
3 September 2014, 18:01
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2208_zps7095ea3a.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2208_zps7095ea3a.jpg.html)

UWone77
6 September 2014, 18:38
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2206_zps2e03f852.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2206_zps2e03f852.jpg.html)

GOST
6 September 2014, 21:23
That is an sexy upper.

Battle Cock
6 September 2014, 21:34
That is an sexy upper.

Agreed. The lines on the various components are well matched.

tb52
13 September 2014, 18:30
https://farm4.staticflickr.com/3885/15230278025_8b978e9fdc_c.jpg (https://flic.kr/p/pcRa3r)20140913_164801_1 (https://flic.kr/p/pcRa3r) by tb5252 (https://www.flickr.com/people/99028180@N02/), on Flickr
https://farm4.staticflickr.com/3918/15207242886_53f92a70c5_c.jpg (https://flic.kr/p/paP6uS)20140913_164624_1 (https://flic.kr/p/paP6uS) by tb5252 (https://www.flickr.com/people/99028180@N02/), on Flickr
https://farm6.staticflickr.com/5552/15207240116_31e2e83885_c.jpg (https://flic.kr/p/paP5F7)20140913_164718_1 (https://flic.kr/p/paP5F7) by tb5252 (https://www.flickr.com/people/99028180@N02/), on Flickr

GOST
13 September 2014, 19:30
That Rogue American Sopmod looks very good.

BC98
13 September 2014, 20:26
Latest version of my 12.5" gun.

http://i60.photobucket.com/albums/h24/brcook03/Firearms/125SBR_zps296969d7.jpg (http://s60.photobucket.com/user/brcook03/media/Firearms/125SBR_zps296969d7.jpg.html)

okdonk
14 September 2014, 02:38
http://imagizer.imageshack.us/v2/800x600q90/674/wQ6U22.jpg (https://imageshack.com/i/iqwQ6U22j)

Crump45
14 September 2014, 12:34
Here is two of mine
Daniel Defense MK18 FDE
1.5 Trijicon ACOG
MFT Minimalist Stock
Phase 5 EBR
Phase 5 winter trigger guard
BCM CH
BCM Pistol grip
Custom rail panels
KNS pins
FNX 45 Tactical FDE
AAC Tirant 45
http://img.tapatalk.com/d/14/09/15/yhe3ynes.jpg

Crump45
14 September 2014, 12:46
Here is two of mine
Daniel Defense MK18 FDE
1.5 Trijicon ACOG
MFT Minimalist Stock
Fortis short Shift
Phase 5 EBR
Phase 5 winter trigger guard
BCM CH
BCM Pistol grip
Custom rail panels
KNS pins
FNX 45 Tactical FDE
AAC Tirant 45

http://img.tapatalk.com/d/14/09/15/py7ydena.jpg

tb52
15 September 2014, 19:29
https://farm4.staticflickr.com/3837/15065461878_234c7d104b_c.jpg (https://flic.kr/p/oXhqWJ)20140915_151447_2 (https://flic.kr/p/oXhqWJ) by tb5252 (https://www.flickr.com/people/99028180@N02/), on Flickr

UWone77
15 September 2014, 19:31
https://farm4.staticflickr.com/3837/15065461878_234c7d104b_c.jpg (https://flic.kr/p/oXhqWJ)20140915_151447_2 (https://flic.kr/p/oXhqWJ) by tb5252 (https://www.flickr.com/people/99028180@N02/), on Flickr

Details please! Now this is what I'm talking about!

Ride4frnt
15 September 2014, 19:56
Here is two of mine
Daniel Defense MK18 FDE
1.5 Trijicon ACOG
MFT Minimalist Stock
Fortis short Shift
Phase 5 EBR
Phase 5 winter trigger guard
BCM CH
BCM Pistol grip
Custom rail panels
KNS pins
FNX 45 Tactical FDE
AAC Tirant 45

http://img.tapatalk.com/d/14/09/15/py7ydena.jpg

You know, those are two very fine weapons, but I just can't like em. Because ROLL DAMN TIDE!

Joking aside, very nice!

GOST
15 September 2014, 20:00
https://farm4.staticflickr.com/3837/15065461878_234c7d104b_c.jpg (https://flic.kr/p/oXhqWJ)20140915_151447_2 (https://flic.kr/p/oXhqWJ) by tb5252 (https://www.flickr.com/people/99028180@N02/), on Flickr

Very cool.

Crump45
15 September 2014, 20:24
You know, those are two very fine weapons, but I just can't like em. Because ROLL DAMN TIDE!

Joking aside, very nice!

I hear ya, we can get along for now. Just put it aside until November.

tb52
16 September 2014, 20:23
Details please! Now this is what I'm talking about!

Thanks, its a djg build, with cqbl, octane 9hd and surefire 328lm

Slippers
17 September 2014, 09:03
This little blaster is making me neglect all my other firearms.

http://i.imgur.com/uIVUp4A.jpg

okdonk
26 September 2014, 00:19
Spike's Tactical Spider SBR Disruptive Grey BattleWorn

Lower
Spike’s Tactical Spider Lower
CMC Trigger Single Stage Flat
Spike's Tactical LPK without FC
Spike's Tactical Buffer Spring w/ ST-T2 Buffer
Spike's Tactical Gen 2 Billet Trigger Guard
BAD CASS - Standard & Short
Seekins Precision Billet Mag Release
Magpul K2 Grip
Noveske QD End Plate
Tactical Link EBAL
Magpul MOE SL Stock
TangoDown ARC MK2 Magazine

Upper
Noveske N4 Upper Receiver
Noveske CHF 10.5” Carbine Length Gas System 1:7 5.56
Noveske Lo-Pro Gas Block w/ Noveske Carbine Gas Tube
UCWRG Premium BCG
PRI M84 Gas Buster Combat CH
Geissele SMR MK4 9.5”
Aimpoint PRO
Aero Precision Cantilever Red Dot Mount 30mm
Magpul MBUS PRO Front & Rear
Magpul XTM Handstop
IWC HSP Thorntail Keymod Offset Light Mount
Inforce HSP WML
YHM Phantom 5.56 QD Suppressor
YHM Phantom 5.56 QD Muzzle Break

Big THX to:
blowndeadline.net for the BattleWorn cerakoting.

http://imagizer.imageshack.us/v2/800x600q90/673/8mWtUW.jpg (https://imageshack.com/i/ip8mWtUWj)

http://imagizer.imageshack.us/v2/800x600q90/540/x7udzs.jpg (https://imageshack.com/i/f0x7udzsj)

http://imagizer.imageshack.us/v2/800x600q90/674/EzWhpR.jpg (https://imageshack.com/i/iqEzWhpRj)

http://imagizer.imageshack.us/v2/800x600q90/538/VnQDsN.jpg (https://imageshack.com/i/eyVnQDsNj)

http://imagizer.imageshack.us/v2/800x600q90/911/ZhOpAl.jpg (https://imageshack.com/i/pbZhOpAlj)

http://imagizer.imageshack.us/v2/800x600q90/908/WwAlq0.jpg (https://imageshack.com/i/p8WwAlq0j)

http://imagizer.imageshack.us/v2/800x600q90/537/N28HrS.jpg (https://imageshack.com/i/exN28HrSj)

http://imagizer.imageshack.us/v2/800x600q90/631/CC5uUH.jpg (https://imageshack.com/i/hjCC5uUHj)

GOST
26 September 2014, 04:25
^^ Very cool^^

six8
26 September 2014, 04:40
That's pretty bad ass

okdonk
26 September 2014, 05:13
Thank you :)

DutyUse
26 September 2014, 14:30
Looks good okdonk, like usual ;D

okdonk
26 September 2014, 14:37
Thank you Duty!

Ride4frnt
26 September 2014, 15:28
Beautiful machine. I'm going tungsten cerakote...do I want battle worn or no? Hmmm...

browcs
26 September 2014, 20:07
Now that is a nice looking blaster okdonk.

okdonk
27 September 2014, 23:28
Beautiful machine. I'm going tungsten cerakote...do I want battle worn or no? Hmmm...
Thx. Regardless u do BattleWorn or not.. for sure you will be happy with Tungsten.

Now that is a nice looking blaster okdonk.
Thank you browcs :)

toolboxluis00200
1 October 2014, 14:28
http://i183.photobucket.com/albums/x151/toolboxluis/fun1of1-60_zps5228bbd8.jpg (http://s183.photobucket.com/user/toolboxluis/media/fun1of1-60_zps5228bbd8.jpg.html)

AaronP220
6 October 2014, 08:25
My buddies BCM / Noveske 11.5" SBR with my 762-SDN-6 can.

http://i.imgur.com/JMTdnO2.jpg

UWone77
10 October 2014, 21:24
MK18

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2444_zps24f38e71.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2444_zps24f38e71.jpg.html)

okdonk
10 October 2014, 21:27
I want that WEVO mag!! :)

mustangfreek
10 October 2014, 21:52
MK18

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2444_zps24f38e71.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2444_zps24f38e71.jpg.html)

Sweet...It turned out good..

UWone77
11 October 2014, 13:51
Next MK18 will have a LMT 10.5" with FBS, PEQ-2, and a 30mm Aimpoint.

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2437_zpsb133fa5e.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2437_zpsb133fa5e.jpg.html)

gatordev
11 October 2014, 14:38
MK18


<pushes glasses up> It's actually a CQBR Block 2.

Smiles and stuff.

Farva
14 October 2014, 20:31
http://imagizer.imageshack.us/v2/800x600q90/674/wQ6U22.jpg (https://imageshack.com/i/iqwQ6U22j)

Absolutely beautiful!

okdonk
14 October 2014, 20:52
Thank you Farva

baboon
15 October 2014, 15:46
http://i62.tinypic.com/w8xdar.jpg
Built a dedicated upper for my M-16A2. Colt's upper, CMMG PDW barrel, bolt& charging handle, YHM quad rail, Knights rail cover, Larue front & rear BUIS, Black Dog Machine drum. Planning on ordering a Silencerco Specter II in the next week or 2.

UWone77
18 October 2014, 13:22
Rainier Arms Gen2 Forged Upper, 9" FORCE, 10.5 UltraMatch, AAC Brakeout 2.0.

You can't see it very well, but there is a piston kit under there. [:D]


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2470_zps821a6984.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2470_zps821a6984.jpg.html)

Gaspipeshooter
18 October 2014, 16:41
Rainier Arms Gen2 Forged Upper, 9" FORCE, 10.5 UltraMatch, AAC Brakeout 2.0.

You can't see it very well, but there is a piston kit under there. [:D]


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2470_zps821a6984.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2470_zps821a6984.jpg.html)

Details on piston set up???

DutyUse
18 October 2014, 17:49
Badass little blaster

CK 187
18 October 2014, 22:38
MK18

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2444_zps24f38e71.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2444_zps24f38e71.jpg.html)



Sick stuff!

UWone77
18 October 2014, 22:52
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2473_zps0795b2c1.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2473_zps0795b2c1.jpg.html)

UWone77
19 October 2014, 15:13
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2477_zps330909dd.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2477_zps330909dd.jpg.html)

six8
19 October 2014, 15:40
http://i.imgur.com/Ak9Us6w.jpg

cagekicker204
19 October 2014, 16:09
Rainier Arms Gen2 Forged Upper, 9" FORCE, 10.5 UltraMatch, AAC Brakeout 2.0.

You can't see it very well, but there is a piston kit under there. [:D]


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2470_zps821a6984.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2470_zps821a6984.jpg.html)

Awesome upper what piston kit did you use?

UWone77
22 October 2014, 18:46
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2474_zpse91cbb5a.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2474_zpse91cbb5a.jpg.html)

UWone77
22 October 2014, 18:46
Awesome upper what piston kit did you use?

I can't release that info just yet... stay tuned.

cagekicker204
22 October 2014, 18:59
I can't release that info just yet... stay tuned.

I will, thank you.

mustangfreek
23 October 2014, 02:06
This thread is really starting to get to me...

...as in like i better stay away or the CC is gonna get burnt up...lol ....So want to get into it, but I know one , two etc wont be enough...and all i can see is $$$ dollar signs..haha..

CarbonScoring
23 October 2014, 02:24
This thread is really starting to get to me...

...as in like i better stay away or the CC is gonna get burnt up...lol So want to get into it, but know one , two etc wont be enough...and all i can see is $$$ dollar signs..haha..

I totally know what you mean. I think I'm going to try out a trust from Coyote Rifleworks. Even 1 SBR would be nice.

CK 187
23 October 2014, 09:46
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2474_zpse91cbb5a.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2474_zpse91cbb5a.jpg.html)

It's all in the details

aatheiss
23 October 2014, 11:39
I can't release that info just yet... stay tuned.

If it's the AA XLP, I'm jealous, and want to know how it runs. I think the XLP would finish out my planned ultra-quiet build, if I can get it to work with 300 BLK in a 10.3" barrel...

Former11B
23 October 2014, 14:28
My 10.5" AR Pistol
http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpsca5b7894.jpg

Favorite AR
16" Rainier Match barrel
12.37" Rainier/Samson Evo rail
Innovative Arms WAR upper & 5.56 suppressor
Locally made billet lower
Geiselle SSA-E trigger, NiB BCG, Magpul grip and ACS stock
Trijicon TA11-J optic (3.5x35 obj)
http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpse04c0b0c.jpg
http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpsf693b038.jpg

Rem 700 .308
http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zps1d374a4e.jpg

I don't have any good pics of my pistols...I'll have to take care of that this weekend

mustangfreek
23 October 2014, 15:17
Nice...What can there on the pistol and the 308?

GOST
23 October 2014, 15:37
I can't release that info just yet... stay tuned.

You and your teasing. Could it be PWS?

Former11B
23 October 2014, 16:14
Nice...What can there on the pistol and the 308?

Innovative Arms quick attach 7.62. Their FH mounts that have coarse threading with tapered surface for mounting plus a latch that ensures zero rotational play. It locks on very tight even without the latch....I put a thin coat of FrogLube on the mount which helps keep it clean and because the tapered surface (which forms a gas seal keeping gas from blowing back) will mate so tightly I doubt the latch is necessary if you really snugged down on it...it's just peace of mind

It's 7.5" long and about 20oz w/o the FH

UWone77
26 October 2014, 18:23
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2504_zps4743ec2c.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2504_zps4743ec2c.jpg.html)

Ride4frnt
26 October 2014, 18:26
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2504_zps4743ec2c.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2504_zps4743ec2c.jpg.html)

Thought something looked strange and I couldn't figure it out, then I realized it's the lack of roll marks on the lower.

Computalotapus
26 October 2014, 18:54
Shot my first suppressed AR today while akersc was taking her CPL/CCW class. I am hooked!!!!! After Christmas I am most definitely setting up a NFA Trust and going to start collecting stamps.

mustangfreek
27 October 2014, 02:17
Shot my first suppressed AR today while akersc was taking her CPL/CCW class. I am hooked!!!!! After Christmas I am most definitely setting up a NFA Trust and going to start collecting stamps.

Haha........

Ride4frnt
27 October 2014, 08:20
Shot my first suppressed AR today while akersc was taking her CPL/CCW class. I am hooked!!!!! After Christmas I am most definitely setting up a NFA Trust and going to start collecting stamps.
same boat. calling coyote rifleworks just as soon as i have the spare cash, which may be as soon as thanksgiving depending on when christmas bonuses are distributed.

mrosbro
27 October 2014, 08:20
Shot my first suppressed AR today while akersc was taking her CPL/CCW class. I am hooked!!!!! After Christmas I am most definitely setting up a NFA Trust and going to start collecting stamps.

i just ordered 3 suppressors and am doing a couple form 1's to convert a couple pistols to SBR's. i put off doing a trust for a couple years but am glad i did it now! look into silencer shop dot com they make it sooooo easy!

Computalotapus
27 October 2014, 09:01
i just ordered 3 suppressors and am doing a couple form 1's to convert a couple pistols to SBR's. i put off doing a trust for a couple years but am glad i did it now! look into silencer shop dot com they make it sooooo easy!

Yeah... I don't like you right now.. hahah. I got some priorities to take care of and need to get Christmas shopping for the girls done and akersc has a birthday coming up here soon. The NFA trust will be done after New Years probably won't start the tax collecting till we move out of Michigan. Would hate to be waiting on a stamp for approval and have to move in the middle of the process.

Farva
28 October 2014, 05:20
Yeah... I don't like you right now.. hahah. I got some priorities to take care of and need to get Christmas shopping for the girls done and akersc has a birthday coming up here soon. The NFA trust will be done after New Years probably won't start the tax collecting till we move out of Michigan. Would hate to be waiting on a stamp for approval and have to move in the middle of the process.

I moved in between getting my SBR stamp and I'm still trying to get the ATF to send it to me...

Slippers
28 October 2014, 07:35
BCM lovin'

http://i.imgur.com/yTBLuLo.jpg

cagekicker204
28 October 2014, 17:56
http://i1052.photobucket.com/albums/s450/wmidberry/Mobile%20Uploads/2014-10-28202119_zps75e99a71.jpg (http://s1052.photobucket.com/user/wmidberry/media/Mobile%20Uploads/2014-10-28202119_zps75e99a71.jpg.html)

MoxyDave
29 October 2014, 13:52
BCM lovin'

http://i.imgur.com/yTBLuLo.jpg

Love the no-frills build and no-frills photo. Nice!

UWone77
4 November 2014, 21:47
I'm starting to be a NFA whore, what can I say? Noveske 10.5" Switchblock

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2530_zps094ae22b.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2530_zps094ae22b.jpg.html)

GOST
5 November 2014, 02:23
A Seekins bolt release would look good on that.

UWone77
6 November 2014, 11:06
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2534_zps87e0c7dc.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2534_zps87e0c7dc.jpg.html)

Ride4frnt
6 November 2014, 11:42
Got mine on order

http://youtu.be/NxOg00iocv0

Soisauss
6 November 2014, 11:54
I'm starting to be a NFA whore, what can I say? Noveske 10.5" Switchblock

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2530_zps094ae22b.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2530_zps094ae22b.jpg.html)

OMG.....so oooooooooopp good

UWone77
9 November 2014, 23:36
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2533_zpsa390d7a5.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2533_zpsa390d7a5.jpg.html)

CarbonScoring
10 November 2014, 02:04
That thing is sick UW.

I've never seen that Troy vertical grip. What do you think of it?

gatordev
10 November 2014, 13:15
Due to a local work-release program, I got to mess with my Mini that's currently serving time. I'm diggin' it.

http://i840.photobucket.com/albums/zz322/gatordev/Public%20pics/M4blk2profileAmmo_zps79c0f745.jpg

Former11B
13 November 2014, 17:47
Nice rifle! Suppressed ARs always get longer looks from me

Is the front sight (KAC?) turned that way due to your preference?

Slippers
14 November 2014, 10:43
Instagram filters can be interesting. Been digging the proctor sling, too. Only a couple more months for my saker...sigh...

http://i.imgur.com/55nkNEG.jpg

gatordev
14 November 2014, 13:34
Nice rifle! Suppressed ARs always get longer looks from me

Is the front sight (KAC?) turned that way due to your preference?

Thanks and yes. I have pretty long arms, so I run my hand out relatively far if I can. If I put a light on where I need it for my hand, the front sight has no place to go (or my hand has no place to go), so I run it back a bit. It's flipped around because the screw rubs my thumb in an annoying way when installed normally but if I flip it around, it's more comfortable.

UWone77
15 November 2014, 12:41
That thing is sick UW.

I've never seen that Troy vertical grip. What do you think of it?

The more I use it, I like it. Haven't weighed it, but it feels much lighter than the aluminum Troy Grips I've used before.

I think the Tango Down QD is still my favorite though.

Farva
16 November 2014, 01:35
Mocked up the SBR I'm gonna finish putting the rest of it together on Tuesday. http://tapatalk.imageshack.com/v2/14/11/16/2bb964e1751d6e8dfcc18f051245e14a.jpg

CarbonScoring
16 November 2014, 02:09
That thing is going to look great.

Don't suppose you have any initial opinions on the KAG yet.

GOST
16 November 2014, 04:07
Looks great Farva!

toolboxluis00200
16 November 2014, 11:31
Mocked up the SBR I'm gonna finish putting the rest of it together on Tuesday. http://tapatalk.imageshack.com/v2/14/11/16/2bb964e1751d6e8dfcc18f051245e14a.jpg

looking good

Farva
17 November 2014, 23:16
Thanks guys! I'll post some more once I get her operational. No opinions on the KAG as of yet. Just from holding it together and aiming I think it's going to an awesome handstop like "grip" that's lopro and won't cost an arm and a leg. Plus it's made by BCM what more needs to be said?

mustangfreek
17 November 2014, 23:52
Mocked up the SBR I'm gonna finish putting the rest of it together on Tuesday. http://tapatalk.imageshack.com/v2/14/11/16/2bb964e1751d6e8dfcc18f051245e14a.jpg


Very nice......Likejealousillneverhaveonenice...lol

DutyUse
18 November 2014, 01:45
Instagram filters can be interesting. Been digging the proctor sling, too. Only a couple more months for my saker...sigh...

http://i.imgur.com/55nkNEG.jpg

Awesome photo and rifle!

Farva
19 November 2014, 03:25
Got it finished up. http://tapatalk.imageshack.com/v2/14/11/19/f7139096ffec31f301ab1b01cd77a410.jpg

GOST
19 November 2014, 04:41
Very nice Farva, is she getting any optics?

Former11B
19 November 2014, 10:26
http://img.photobucket.com/albums/v74/DownSouthTAS/DSC06608_zps9de70a74.jpg

Ride4frnt
19 November 2014, 10:44
I need a trust...

UWone77
19 November 2014, 10:45
I need a trust...

I don't think they get any cheaper than the special from Coyote right now...

Ride4frnt
19 November 2014, 10:46
I don't think they get any cheaper than the special from Coyote right now...

Waitin on my Xmas bonus coming hopefully this Friday. Christmas has put a damper on my checkbook.

Former11B
19 November 2014, 13:54
It's that "its cold but I'm still gonna shoot" time of year:

http://img.photobucket.com/albums/v74/DownSouthTAS/SnowDay2_zps5d10fcf3.jpg

Farva
19 November 2014, 14:52
Yea Ghost at some point she will get optics. I'd like an Aimpoint of some sort. Really dig the comp m4 but she price is steep. The T1 and H1's are nice and the PRO is a good price. So I'm looking at one of those down the road

UWone77
19 November 2014, 22:41
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2579_zpsf9fc62f1.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2579_zpsf9fc62f1.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2578_zpsdc1b178f.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2578_zpsdc1b178f.jpg.html)

six8
22 November 2014, 13:00
http://i.imgur.com/uojFnRh.jpg

UWone77
22 November 2014, 13:25
I really like that looks of that Lantac Dragon on a short barrel. Might have to put one on my next 10.5

six8
22 November 2014, 13:45
I really like that looks of that Lantac Dragon on a short barrel. Might have to put one on my next 10.5

You should. They work!

toolboxluis00200
22 November 2014, 13:48
http://i.imgur.com/uojFnRh.jpg

super nice SBR are awesome

six8
22 November 2014, 15:40
super nice SBR are awesome

Thank you Sir!


Sent from my iPhone using Tapatalk

toolboxluis00200
22 November 2014, 15:46
Thank you Sir!


Sent from my iPhone using Tapatalk

u welcome

toolboxluis00200
22 November 2014, 15:46
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2579_zpsf9fc62f1.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2579_zpsf9fc62f1.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2578_zpsdc1b178f.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2578_zpsdc1b178f.jpg.html)

is that a Tin BCG ??

GOST
22 November 2014, 16:09
http://i.imgur.com/uojFnRh.jpg

Nice rifle. How loud is that setup?

six8
22 November 2014, 16:20
Nice rifle. How loud is that setup?

I honestly can't tell a difference between this and my 14.5" BCM. Both are wearing Dragon MB's. Definitely more blast from the SBR though. I wear over ear pro and have never felt the need to "double up".

Edit: have not shot it indoors yet.

Sent from my iPhone using Tapatalk

GOST
22 November 2014, 16:46
Thanks six8, by the way what length barrel?

six8
22 November 2014, 17:04
Thanks six8, by the way what length barrel?

BCM 11.5" LW BBL. Vltor MUR upper and San Tan lower.


Sent from my iPhone using Tapatalk

GOST
22 November 2014, 20:39
I've been waiting for BCM to sell 11.5" ELW seperately.

six8
24 November 2014, 14:00
Painted the Rail on my SBR. Disregard the Micro mount, that will be changed.


http://i.imgur.com/PNCG6LR.jpg


Thoughts?



Sent from my iPhone using Tapatalk

Jerry R
24 November 2014, 14:07
Nicely done. Are you going to do the upper/lower to match it?

six8
24 November 2014, 14:42
Nicely done. Are you going to do the upper/lower to match it?

If I do I'll have it all cerakoted. Really want the receivers and rail in OD.


Sent from my iPhone using Tapatalk

six8
3 December 2014, 04:50
http://i.imgur.com/QMaq2I1.jpg

GOST
3 December 2014, 05:30
I like it black best six8, love that rifle. Does your Dragon carbon up your light bad?

six8
3 December 2014, 07:07
Took some of the shadows out

http://i.imgur.com/C3Cilk3.jpg

six8
3 December 2014, 07:31
I like it black best six8, love that rifle. Does your Dragon carbon up your light bad?

Me too! Lol

Haven't shot it yet with the new light. It wasn't bad when I had the Inforce but the SF sticks out further.


Sent from my iPhone using Tapatalk

Ordnance
3 December 2014, 09:13
If I do I'll have it all cerakoted. Really want the receivers and rail in OD.


Sent from my iPhone using Tapatalk

If you're going to go as far as getting it completely cerakoted I would recommend going even farther and look at getting a custom paint job. I know someone who does phenomenal paint jobs ranging from krypto to custom flectarns to ATACS and digicams.

six8
3 December 2014, 09:23
If you're going to go as far as getting it completely cerakoted I would recommend going even farther and look at getting a custom paint job. I know someone who does phenomenal paint jobs ranging from krypto to custom flectarns to ATACS and digicams.

Pics? Info? Price? I'd hate to "send" my SBR lower out too far


Sent from my iPhone using Tapatalk

Ordnance
3 December 2014, 11:01
Pics? Info? Price? I'd hate to "send" my SBR lower out too far


Sent from my iPhone using Tapatalk

https://scontent-a-sea.xx.fbcdn.net/hphotos-xfa1/t31.0-8/10628666_522496547887592_402857909314325931_o.jpg

https://scontent-b-sea.xx.fbcdn.net/hphotos-xpf1/t31.0-8/1941469_529033547233892_9162733330013692336_o.jpg

His company is Custom Gun Coatings (https://www.facebook.com/CustomGunCoatings), and his name is Brandon. He's well known in the precision rifle world doing custom paint jobs for a LOT of companies including GA Precision, Armalight, Manners stocks, etc. If you have an idea for a custom camo he can work with you on it as well. It's best to call him for a quote. If anyone is going to SHOT show you can stop by Armalight or GAPs booth and see his work.

toolboxluis00200
3 December 2014, 11:03
i like the rail drool

Ordnance
3 December 2014, 11:08
i like the rail drool

And it's all either Cerakote, Duracoat, and/or Polane. You should see custom work he does from time to time when he gets special requests... lol...

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10352194_552062208264359_9041061363799330880_n.jpg ?oh=3931743d695bd5bbb526c1944aef6fae&oe=54FD9158&__gda__=1426178436_5c44871b4e454df7f69ef9e6ed89a55 7

CK 187
5 December 2014, 13:10
https://farm6.staticflickr.com/5552/15207240116_31e2e83885_c.jpg (https://flic.kr/p/paP5F7)20140913_164718_1 (https://flic.kr/p/paP5F7) by tb5252 (https://www.flickr.com/people/99028180@N02/), on Flickr



Man that thing looks nice

Ride4frnt
5 December 2014, 14:15
Rather than start a whole thread that only requires one definitive reply, I'll just ask you guys here who know more than I.

My trust will be put to use soon in the manner of a form 1 SBR. I have two options. Scratch the pistol build, and use that lower as the SBR, or SBR one of my existing lowers, which is currently home to my 14.5" build.

If I go with the existing lower, will that mean that the pinned 14.5" upper can no longer be used on that lower?

UWone77
5 December 2014, 14:26
Rather than start a whole thread that only requires one definitive reply, I'll just ask you guys here who know more than I.

My trust will be put to use soon in the manner of a form 1 SBR. I have two options. Scratch the pistol build, and use that lower as the SBR, or SBR one of my existing lowers, which is currently home to my 14.5" build.

If I go with the existing lower, will that mean that the pinned 14.5" upper can no longer be used on that lower?


If cost is an issue, I would just SBR an existing lower, as long as you're comfortable that it's in spec, and that's the lower you want to go with the rest of your life.

When you file your Form 1, it will ask you for a barrel length. Put down what you will go with as your permanent SBR upper.

Otherwise, you're free to change out the upper to whatever length you please.

Ride4frnt
5 December 2014, 14:43
Cost isn't the issue. I was just gonna get the lower that my 14.5 is on SBR'd and continue with my plans to build the pistol. I may well just end up selling my pistol components and buying a stock and SBRing the pistol lower. It's up in the air.

All I needed to know was if I was legally allowed to have a barrel of 16" on a lower that is registered as a SBR. Thanks for your help.

gatordev
5 December 2014, 14:44
All I needed to know was if I was legally allowed to have a barrel of 16" on a lower that is registered as a SBR. Thanks for your help.

You are good to go. After my first SBR, I thought one would be enough, since I can just swap things around. I was so naive...

Ride4frnt
5 December 2014, 14:46
You are good to go. After my first SBR, I thought one would be enough, since I can just swap things around. I was so naive...

That's my plan as I now. I have the means to buy plenty more lowers, but the desire to buy a house negates my need to have more than one SBR lower currently.

six8
6 December 2014, 14:17
http://i.imgur.com/zpghECR.jpg


Sent from my iPhone using Tapatalk

Gaspipeshooter
6 December 2014, 14:32
six8, that is nice!!! I really like that MI handguard!

six8
6 December 2014, 16:03
Thanks Pipe


Sent from my iPhone using Tapatalk

six8
8 December 2014, 15:52
Arisaka handstop and BCM KAG came in.

http://tapatalk.imageshack.com/v2/14/12/08/fc12999253eb5572f73a1f883a5af4f0.jpg


Sent from my iPhone using Tapatalk

CK 187
11 December 2014, 09:24
My wallet and wife DO NOT like this thread. [:D]

Ride4frnt
11 December 2014, 10:46
Arisaka handstop and BCM KAG came in.

http://tapatalk.imageshack.com/v2/14/12/08/fc12999253eb5572f73a1f883a5af4f0.jpg


Sent from my iPhone using Tapatalk

How do you like that MI rail? I want to sell my rainier and replace it with either a 9" of the same model, or the 9" MI SSK... Decisions.

six8
11 December 2014, 11:01
How do you like that MI rail? I want to sell my rainier and replace it with either a 9" of the same model, or the 9" MI SSK... Decisions.

It's GTG. Solid, light, and inexpensive


Sent from my iPhone using Tapatalk

Ride4frnt
11 December 2014, 11:22
It's GTG. Solid, light, and inexpensive


Sent from my iPhone using Tapatalk

What I figured. I need to find a 9" rainier to trade for or sell my 12".

UWone77
19 December 2014, 22:51
Still my favorite SBR.

After the move, I finally have more room to place my lighting where I want.

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2640_zpsd070d75c.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2640_zpsd070d75c.jpg.html)

mustangfreek
20 December 2014, 01:00
Damn...so jealous..Noveske SBR....

CarbonScoring
20 December 2014, 04:13
Still my favorite SBR.

After the move, I finally have more room to place my lighting where I want.

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2640_zpsd070d75c.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2640_zpsd070d75c.jpg.html)

The lighting looks great UW. Great detail.

Dstrbdmedic167
20 December 2014, 12:49
Here us the last SBR I built using that sweet RA Billet set.

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/300BLK1of1_zpsc2aa5dbe.jpg

Former11B
20 December 2014, 15:57
Looks great! Is it easy to get lined up behind your RDS or would a riser help?

I definitely love the Rainier build. My older model Rainier Evolution rail is looking dated compared to the new ones!

Dstrbdmedic167
20 December 2014, 16:22
Looks great! Is it easy to get lined up behind your RDS or would a riser help?

I definitely love the Rainier build. My older model Rainier Evolution rail is looking dated compared to the new ones!

Thanks! It's still in the air. I'll probably end up with the riser that came with it but I haven't taken the time to swap out. This rifle will get a lot more use when my cans get out of jail.

toolboxluis00200
20 December 2014, 16:48
Here us the last SBR I built using that sweet RA Billet set.

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/300BLK1of1_zpsc2aa5dbe.jpg

holy cow that is nice

Dstrbdmedic167
20 December 2014, 17:19
holy cow that is nice

thanks Luis

toolboxluis00200
20 December 2014, 17:43
holy cow that is nice


thanks Luis

you welcome

Former11B
21 December 2014, 07:26
My 7.62 can during construction. The core walls, like the endcap, are much thicker than a lot of the big name cans out there, and still at the same overall weight (20oz minus muzzle device). Built like a tank

http://img.photobucket.com/albums/v74/DownSouthTAS/image_zps8e8d2ea2.jpg


My Sig 1921-.22
http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpse9015f2a.jpg

Ride4frnt
21 December 2014, 11:48
My 7.62 can during construction. The core walls, like the endcap, are much thicker than a lot of the big name cans out there, and still at the same overall weight (20oz minus muzzle device). Built like a tank

http://img.photobucket.com/albums/v74/DownSouthTAS/image_zps8e8d2ea2.jpg


My Sig 1921-.22
http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpse9015f2a.jpg

Looks good. Would love to build a can myself.

And james. You know my thoughts on your SBR, dammit!

cagekicker204
21 December 2014, 12:24
Here us the last SBR I built using that sweet RA Billet set.

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/300BLK1of1_zpsc2aa5dbe.jpg

Awesome rifle!

six8
21 December 2014, 12:32
Here us the last SBR I built using that sweet RA Billet set.

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/300BLK1of1_zpsc2aa5dbe.jpg

Rail and bbl length please? I dig the painted bbl. I did my .458 that way


Sent from my iPhone using Tapatalk

Dstrbdmedic167
21 December 2014, 12:33
Rail and bbl length please? I dig the painted bbl. I did my .458 that way


Sent from my iPhone using Tapatalk

7" force rail and 9.2" MDWS barrel

six8
21 December 2014, 12:37
7" force rail and 9.2" MDWS barrel

Thanks Bud


Sent from my iPhone using Tapatalk

Dstrbdmedic167
21 December 2014, 12:39
Thanks Bud


Sent from my iPhone using Tapatalk

Yes sir!! I love that little rifle.

eldogg
21 December 2014, 18:12
on the left a soon to be, aero 10.5 in pistol form. on the right a sionics 11.5 upper and my pew pew pew lower.
http://i58.photobucket.com/albums/g258/eldogg/NFAANDPISTOL006.jpg (http://s58.photobucket.com/user/eldogg/media/NFAANDPISTOL006.jpg.html)

toolboxluis00200
21 December 2014, 18:33
My 7.62 can during construction. The core walls, like the endcap, are much thicker than a lot of the big name cans out there, and still at the same overall weight (20oz minus muzzle device). Built like a tank

http://img.photobucket.com/albums/v74/DownSouthTAS/image_zps8e8d2ea2.jpg


My Sig 1921-.22
http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpse9015f2a.jpg

wow you made you own that is cool

mustangfreek
22 December 2014, 01:22
Here us the last SBR I built using that sweet RA Billet set.

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/300BLK1of1_zpsc2aa5dbe.jpg



Damnit stop with the SBR's...lol..I really want to switch my pistol over.....ughhhh..

But really, nice build, and i used a lot of the same parts on a similiar build, except i used the forged RA adac lower...i want to do another build with a billet set, as i dont have any and that ra set is up on the top of wants..lol

Nice job bud..

Dstrbdmedic167
22 December 2014, 07:30
Damnit stop with the SBR's...lol..I really want to switch my pistol over.....ughhhh..

But really, nice build, and i used a lot of the same parts on a similiar build, except i used the forged RA adac lower...i want to do another build with a billet set, as i dont have any and that ra set is up on the top of wants..lol

Nice job bud..

It's a super set. I think I'll use billet on the rest of my builds and may even start replacing them one bu one with various billet sets. A San Tan is next thing on my list.

CarbonScoring
23 December 2014, 01:16
https://farm8.staticflickr.com/7573/16059750296_e6336c3499_b.jpg

mustangfreek
23 December 2014, 01:27
:P

CK 187
23 December 2014, 04:31
http://img.photobucket.com/albums/v74/DownSouthTAS/image_zps8e8d2ea2.jpg


That's a beefy monocore for sure. Your design?

CK 187
23 December 2014, 04:36
http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/IMG_1626NFA22LRsonStamp300PPISized1024.jpg



Wow! That is high on my list of "want's". I was looking at the 22/45 Lite's just the other day

Ride4frnt
23 December 2014, 07:05
https://farm8.staticflickr.com/7573/16059750296_e6336c3499_b.jpg

That a 10" solo lite rail. Comp has been whining about wanting a review of that.

voodoo_man
23 December 2014, 07:07
Looks good.

Computalotapus
23 December 2014, 07:44
That a 10" solo lite rail. Comp has been whining about wanting a review of that.

Really thinking about giving the SLR rails a go. I am up in arms I don't know if I want to do an SI-Defense .308 or RA .308 receiver set.. meh one day I will get that .308 build going

CarbonScoring
23 December 2014, 08:48
I'm really happy with the SLR handguard. It's very comfortable and the finish is good. I like the way they use a "washer" with the 2 screws that tighten the rail onto the barrel nut. This helps keep you from overtightening the screws and crushing that area of the rail (see here (https://www.flickr.com/photos/carbonscoring/15171616264/)). My only complaint is the lack of a QD point for a sling. I'll be adding an Arisaka M-lok QD soon.

Former11B
23 December 2014, 13:47
That's a beefy monocore for sure. Your design?

Just read back through this thread; didn't mean to give the wrong impressions to Luis or anyone else. The can was made by Innovative Arms, I just visited it a bunch during the process because I'd go to the shop for barrel threading or other cans and got to see that one through its early days.

toolboxluis00200
23 December 2014, 14:19
Just read back through this thread; didn't mean to give the wrong impressions to Luis or anyone else. The can was made by Innovative Arms, I just visited it a bunch during the process because I'd go to the shop for barrel threading or other cans and got to see that one through its early days.

ohhh ok still it looks nice

CarbonScoring
24 December 2014, 00:25
Moved my 10.5" Aero Precision barrel over to a new upper and handguard.

https://farm8.staticflickr.com/7524/15906975379_8f92166352_b.jpg

Farva
24 December 2014, 13:32
Man there are some damn sexy SBR's in here!

Ride4frnt
24 December 2014, 13:33
Got my NFA trust notarized today. Let the fun begin

Dstrbdmedic167
24 December 2014, 14:09
Got my NFA trust notarized today. Let the fun begin

Awwww S#it....

toolboxluis00200
24 December 2014, 14:16
Moved my 10.5" Aero Precision barrel over to a new upper and handguard.

https://farm8.staticflickr.com/7524/15906975379_ea1b64729b_b.jpg

i like it
i like how the Rail sticks out

toolboxluis00200
24 December 2014, 14:16
Got my NFA trust notarized today. Let the fun begin

SBR the crap out of all your lower

Dstrbdmedic167
30 December 2014, 08:14
Got my cans last night! Super excited to shoot them but it will be a tomorrow before I can step out in the yard. For now some quick cell pics...

http://tapatalk.imageshack.com/v2/14/12/30/bc7727ebc6011a982561fde9d5e8ce33.jpg

toolboxluis00200
30 December 2014, 15:38
nice

DutyUse
30 December 2014, 17:59
Got my cans last night! Super excited to shoot them but it will be a tomorrow before I can step out in the yard. For now some quick cell pics...

http://tapatalk.imageshack.com/v2/14/12/30/bc7727ebc6011a982561fde9d5e8ce33.jpg

Grats bro! I'm super jealous to be in the stamp club

Dstrbdmedic167
30 December 2014, 21:27
Grats bro! I'm super jealous to be in the stamp club

Thanks. I'm up to 4 all together now. Expensive hobby stamp collecting who knew?

mustangfreek
31 December 2014, 04:21
Got my cans last night! Super excited to shoot them but it will be a tomorrow before I can step out in the yard. For now some quick cell pics...

http://tapatalk.imageshack.com/v2/14/12/30/bc7727ebc6011a982561fde9d5e8ce33.jpg

Very nice....:P

voodoo_man
31 December 2014, 16:15
http://i.imgur.com/Vf1mVOU.jpg

Dstrbdmedic167
31 December 2014, 16:17
Well how about a short video... 300blk using my loads. Apparently just above SoS but still quiet enough I don't need ears.

https://vimeo.com/115735051

six8
31 December 2014, 18:43
Awesome


Sent from my iPhone using Tapatalk

Jerry R
1 January 2015, 07:49
Well how about a short video...

Nice ! Diggin' shooting in the back yard !

DutyUse
1 January 2015, 08:03
Well how about a short video... 300blk using my loads. Apparently just above SoS but still quiet enough I don't need ears.

https://vimeo.com/115735051

Cool video! I use to have videos on youtube but took em down because i didn't want work finding them (my yt account was under my real name dumb..)

I need to start making some more

GOST
1 January 2015, 10:33
Very nice Dstrbdmedic!

Dstrbdmedic167
1 January 2015, 10:45
Thanks guys this is the quick first time out in the yard with it. I plan to do some actual decent comparison videos with 556, 277wlv, 6.8, 300blk and 308. There aren't any videos of the new 762-SD it's all from the old one.

toolboxluis00200
1 January 2015, 11:26
Thanks guys this is the quick first time out in the yard with it. I plan to do some actual decent comparison videos with 556, 277wlv, 6.8, 300blk and 308. There aren't any videos of the new 762-SD it's all from the old one.

ohhh this will be intrsting

CarbonScoring
2 January 2015, 06:11
Finally got out to sight in my SBR and get some brass marks on it. [:D] It's was a bit cold, so I didn't get a ton of shooting it, but it ran pretty good.

https://farm8.staticflickr.com/7497/16172477672_e1aae2b40d_b.jpg

https://farm8.staticflickr.com/7550/15987179339_f4cdef4129_b.jpg

GOST
2 January 2015, 06:26
CarbonScoring I believe this is the first time you've posted pics of a rifle that hasn't been cleaned. I like it.

CarbonScoring
2 January 2015, 06:33
CarbonScoring I believe this is the first time you've posted pics of a rifle that hasn't been cleaned. I like it.

If it wasn't 25° out (and at a better range), it would have been dirtier. Once spring starts you'll start seeing more filth.

voodoo_man
2 January 2015, 06:33
you call that dirty?

http://i.imgur.com/n1VqcCK.jpg

11.5 BCM ;)

CarbonScoring
2 January 2015, 06:34
Nice [:D]

GOST
2 January 2015, 06:43
Once spring starts you'll start seeing more filth.

Sounds like we're going XXX.[:D]

CarbonScoring
2 January 2015, 06:49
Sounds like we're going XXX.[:D]

If I can find some willing participants. ;)

GOST
2 January 2015, 06:54
If I can find some willing participants. ;)

Sounds like a role call, be careful what you ask for.[BD]

CarbonScoring
2 January 2015, 08:43
Sounds like a role call, be careful what you ask for.[BD]

Yeah, this may turn into a thread about pickles that you don't want to be involved in. ;)

Former11B
2 January 2015, 08:58
you call that dirty?

http://i.imgur.com/n1VqcCK.jpg

11.5 BCM ;)

Do you run any type of adjustable gas system?

voodoo_man
2 January 2015, 09:48
Do you run any type of adjustable gas system?

Cut down front post.

schambers
2 January 2015, 18:32
Finished this guy up today. Only a few more months until the final piece comes in!

https://lh5.googleusercontent.com/-5y2RNak8ADQ/VKdTw8QltnI/AAAAAAAAAsM/GsOVl8VRnik/w1034-h545-no/DSC02197.JPG

schambers
2 January 2015, 18:32
https://lh3.googleusercontent.com/-uCMNolnCK4k/VKdT7l-UTcI/AAAAAAAAAsc/QJID1L4R8kI/w1034-h640-no/DSC02209.JPG

Slippers
2 January 2015, 18:33
http://i.imgur.com/aP7p5Cj.jpg

CarbonScoring
2 January 2015, 23:55
Nice shot Will. Is that a Trifecta up front?

I just ordered a Specwar version for my SBR (wish I was allowed to put the can up there are well).

GOST
3 January 2015, 09:07
Finished this guy up today. Only a few more months until the final piece comes in!

https://lh5.googleusercontent.com/-5y2RNak8ADQ/VKdTw8QltnI/AAAAAAAAAsM/GsOVl8VRnik/w1034-h545-no/DSC02197.JPG

Looks really good, how do yo like the URX 4? How does it compare to a KMR?

schambers
3 January 2015, 09:55
The finish is classic Knights. It feels very robust but also has a rough texture compared to other hand guards (which I kind of prefer).

The barrel nut is built into the rail so the entire one-piece system is timed instead of slipped on, which made the installation a different experience. It feels very robust and I like that the rail system (barrel nut, QD points, etc are) are all part of the one piece design.

It *feels* a little more durable than the BCM KMR, but its also slightly heavier. The added weight balances the rifle well.

Everything was put together last night so I haven't had a chance to push any rounds through it.

If I had to point out one thing that I don't like about the rail, its that it doesn't fit flush with the receiver. Because shims are used for the timing, there will always be a small gap and while it doesn't effect performance, its not not ascetically perfect.

*edit*
I always felt like the finish on the KMR would chip easily or the magnesium in the material blend would be less resistant to damage. I don't know if those things are true or not, but its just how I felt about the product.

GOST
3 January 2015, 10:18
Thanks Schambers. I'd been considering a URX 4 10.75" for a 11.5" barrel, but the installation has always had me worried.

schambers
3 January 2015, 10:32
Installation isn't bad. Knights says that you can torque and align the rail before installing the gas block and tube, but this only works if you can access the pins through the keymod holes.

With the setup I was running, I wasn't able to do that so I ended up needing to rotate the rail... a lot. This is how my installation went:

1.) Determine what shims are needed for timing. put shims into place.
2.) Screw in URX but don't tighten/time completely. Rotate URX so that the gas block can be dropped in and gas block pin can be accessed with a punch, through a keymod hole.
3) Install gas block pin
4) Install gas tube by pushing it through the receiver, and into the gas block.
5) Rotate URX so the gas tube pin can be accessed and installed through a keymod hold. Install pin
6) Apply final torque to URX.

Ride4frnt
3 January 2015, 13:22
Another few weeks to wait, but dammit I'm posting it anyways. MFT stock and VG6 epsilon (thank you CS) are en route. The last of the things I need are the barrel and the stamp. Cannot wait!

Cmc trigger, rainier trigger guard, aim nib bcg, midwest industries 9" ssk rail, NTD forward assist. Barrel and epsilon will also be stainless.

http://i1048.photobucket.com/albums/s374/blue94dc4/Firearms/DDD710CF-1104-4A44-B16C-242CFDE71A0A_zps6b0ocemo.jpg

toolboxluis00200
3 January 2015, 13:38
i like the hand guards