NFA Picture Thread

[Jerry R]

https://farm8.staticflickr.com/7742/26908101120_c7ebaf5dd9_k.jpg (https://flic.kr/p/GZM3ZW)Geoff Wilson 6-8 2 (1 of 1) (https://flic.kr/p/GZM3ZW) by Steven Ragan (https://www.flickr.com/photos/111961163@N05/), on Flickr

Looks like it came that way, I had no idea it needed that kind of work.

Geoff and I went through a half dozen phone calls and multiple cell phone pix as he worked on them. He even went to Harbor Freight and bought a small drill press to be sure the countersink would be square to the work piece. I think he did an outstanding job.

[Deadwing]

Saker 762 with a lot of use.

http://i.imgur.com/MFjGFa1l.jpg

Wow...mine looks new by comparison! What do you think of the ASR mount compared to the Trifecta? I haven't really had any issues with the Trifecta, but apparently some have and the ASR fixed the problem(s). The Hybrid i'm waiting on uses ASR, so i'm debating whether it'll be worth the expense to convert everything to ASR.

[Former11B]

Recce 5

http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpst8mlldlx.jpg

http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpsh5khxjr8.jpg



After about 500 rounds:

http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpsjypvptet.jpg

[gatordev]

Recce 5

http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpst8mlldlx.jpg


I like this shot because you managed to take it at the perfect focal length and position to make the ACOG just about 1x.

[Joelski]

Playing around in lightroom. Pointers?

http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/Mk-18.jpg%201%20of%201.jpg (http://s997.photobucket.com/user/Joelski144/media/ARs%20and%20Pistols/MK%2018/Mk-18.jpg%201%20of%201.jpg.html)

[voodoo_man]

http://i.imgur.com/GtJI9GX.jpg (http://www.vdmsr.com/2016/06/pdw-sbr.html)

[UWone77]

http://i.imgur.com/GtJI9GX.jpg (http://www.vdmsr.com/2016/06/pdw-sbr.html)

That PDW stock is growing on me.

[alamo5000]

My SBR. I've had the stamp for a while but this is my first ever photo of it that I've put up.

http://i1320.photobucket.com/albums/u538/Alamo_5000/IMGP0133_zpsjnuux4xh.jpg

[alamo5000]

Another shot.

http://i1320.photobucket.com/albums/u538/Alamo_5000/IMGP0130_zpsnwhohwfb.jpg

[Jerry R]

Very Nice !

[Former11B]

Another shot.

http://i1320.photobucket.com/albums/u538/Alamo_5000/IMGP0130_zpsnwhohwfb.jpg

Any reason you went with the FH mount for the Recce 5? I always recommend a brake mount for cans on SBRs when possible so it helpd mitigate flame cuttings and erosion on the blast baffle

[Slippers]

Any reason you went with the FH mount for the Recce 5? I always recommend a brake mount for cans on SBRs when possible so it helpd mitigate flame cuttings and erosion on the blast baffle

A brake makes it unbearable to shoot without the can for a lot of people.

[alamo5000]

Any reason you went with the FH mount for the Recce 5? I always recommend a brake mount for cans on SBRs when possible so it helpd mitigate flame cuttings and erosion on the blast baffle


A brake makes it unbearable to shoot without the can for a lot of people.

A quote from the Griffin description of the Hammer Comp:

"The Taper Mount 5.56.mm Hammer Comp provides 2 sacrificial baffles that reduce recoil and ensure maximum service life of your suppressor."

I have heard that about SBR's and excessive flash etc harming suppressors before but honestly my thought process went a little like this...."Trust Griffin" :)

Other than that I wanted something that provided a look and function for shooting non suppressed and suppressed both.

The one I picked actually has two sacrificial baffles...the same amount as the full on brake.

Slippers actually does make a very valid point...which I did take into consideration even though I had minimal experience with SBRs before. To me the homework really paid off to be honest because it does do a good job in both situations. And I think in ways it might actually protect the suppressor more because it breaks up that flame ball that would otherwise be there. That might not be true, but that's my impression and intention.

When I started shooting with shortened barrels (pistol and later SBR) it became very prevalent very fast that everything I had researched about that blast was true. My opinion on how it kind of works is if you are physically six inches closer to the end of the muzzle with your face...then add into that the extra pressures of SBR shooting and the extra noise and all that other stuff... a brake just directs all that stuff right back in your face...so I was like "is there any other option?"

I seriously had the guy across the street ask me once 'man! do you know who has that cannon over there? that damn thing is LOUD!' LOL :)

I had honestly heard and read about it (primarily here on WEVO) so that is part of the reason why I did not go full brake. Non suppressed the thing is pretty loud I do have to admit. Even with muffs on it's pretty noisy, but if that blast is being directed that much more out and kind of back in your face in that close of a proximity I figured it was a good option to try something else.

I think the Hammer Comp does a pretty good job of breaking up the flame and it has the same basic amount of sacrificial blast baffles so it seemed to me to be the best of all worlds. In my opinion the one I have on there really does make a difference when shooting non suppressed while still protecting the suppressor.

But honestly I did research every option and tried to make an informed decision....and that's what I came up with.

[alamo5000]

Also if you look at the minimalist brake offered by GA it has just one sacrificial baffle...and that one and the regular brake will both be directing those blasts aka the flame into the same spots on the walls of the suppressor, whereas in my opinion the Hammer Comp that I am using breaks it up and makes that blast more circular and less concentrated in one spot vs more linear ...

Then when you consider that with the taper mount the suppressor is mounted the same way pretty much every time, with a full on brake that blast is directed at almost full blast into the same spot, whereas with the Hammer Comp it seems like it would be more diffused, if that makes any sense.

[mustangfreek]

Nice looking blaster Alamo...

I probably read it and forgot..what length barrel?

[alamo5000]

Nice looking blaster Alamo...

I probably read it and forgot..what length barrel?

It's a 10.5"

[Former11B]

A brake makes it unbearable to shoot without the can for a lot of people.

There is definitely give and take, but if I'm equipping it to run suppressed, it'll do so 99.9% of the time, so my concern is the can.

I've used my 10.5" rifle without a can to run a guy off a cell phone at the range who was talking (very loudly nonstop) and shooting a 10/22 at the same time. There are up sides [BD]


Also if you look at the minimalist brake offered by GA it has just one sacrificial baffle...and that one and the regular brake will both be directing those blasts aka the flame into the same spots on the walls of the suppressor, whereas in my opinion the Hammer Comp that I am using breaks it up and makes that blast more circular and less concentrated in one spot vs more linear ...

Then when you consider that with the taper mount the suppressor is mounted the same way pretty much every time, with a full on brake that blast is directed at almost full blast into the same spot, whereas with the Hammer Comp it seems like it would be more diffused, if that makes any sense.

Sure there's a big fireball in the blast chamber no matter what muzzle device is used, but I believe you're mistaken about how the flame cutting and erosion works when forced through a brake. If you've seen any brakes used with cans on SBRs for any length of time, the brakes get worn out in a conical fashion around the exit aperture, not really the sides.

I wasn't sure what muzzle device you had, so if it's more of a comp rather than a flash hider, and there's a sacrificial baffle or two in there, thats definitely a positive.

[Joelski]

Can't decide which vertical grip I like better, this, or the Magpul afg 2. Grip is essentially the same on either and both are better than none at all. I choke down on the grip toward the muzzle - I've seen this called the "keyhole grip". Might get a stubbier version, but I haven't noticed this one hanging up on stuff to justify the expense. Anybody else have a preference?

http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20160607_232051.jpg (http://s997.photobucket.com/user/Joelski144/media/ARs%20and%20Pistols/MK%2018/20160607_232051.jpg.html)

[UWone77]

Can't decide which vertical grip I like better, this, or the Magpul afg 2. Grip is essentially the same on either and both are better than none at all. I choke down on the grip toward the muzzle - I've seen this called the "keyhole grip". Might get a stubbier version, but I haven't noticed this one hanging up on stuff to justify the expense. Anybody else have a preference?

http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20160607_232051.jpg (http://s997.photobucket.com/user/Joelski144/media/ARs%20and%20Pistols/MK%2018/20160607_232051.jpg.html)

The Tango Down VFG is about the only VFG I like, other than maybe the Gear Sector. I don't shoot with a traditional thumb over C Clamp, so I still like VFGs. They are also easier to brace against a barricade.

[Joelski]

The Tango Down VFG is about the only VFG I like, other than maybe the Gear Sector. I don't shoot with a traditional thumb over C Clamp, so I still like VFGs. They are also easier to brace against a barricade.

Sounds like the same way I shoot. I can't do that grip either; it just doesn't feel right after 40+ years of shooting rifles and shottys with the traditional grip.

Edit: Thumb over the barrel isn't what I'm considering traditional!

[UWone77]

Sounds like the same way I shoot. I can't do that grip either; it just doesn't feel right after 40+ years of shooting rifles and shottys with the traditional grip.

Edit: Thumb over the barrel isn't what I'm considering traditional!

LOL, I guess what I meant was, I do extend my arm out, but keep my thumb over to the side about 1 o'clock, instead of have the thumb over the top of the rail and use the "pit" of the VFG as the handstop.

Holding a VFG as it was intended feels unnatural to me.

[Stickman]

https://c8.staticflickr.com/2/1624/25317762055_0a027d458f_b.jpg (https://flic.kr/p/Ezf9AT)Stickman (https://flic.kr/p/Ezf9AT) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr

[Deadwing]

Can't decide which vertical grip I like better, this, or the Magpul afg 2. Grip is essentially the same on either and both are better than none at all. I choke down on the grip toward the muzzle - I've seen this called the "keyhole grip". Might get a stubbier version, but I haven't noticed this one hanging up on stuff to justify the expense. Anybody else have a preference?

http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20160607_232051.jpg (http://s997.photobucket.com/user/Joelski144/media/ARs%20and%20Pistols/MK%2018/20160607_232051.jpg.html)

I'm a fan of the traditional vertical forward grips over the angled variety. I like the Tango Down VFGs quite a bit. The BCM shortys are comfortable too, and are slick for direct mounting on keymod rails.

[mustangfreek]

It's a 10.5"



Nice..

Now get out and shoot that thing...[BD]

[mustangfreek]

Can't decide which vertical grip I like better, this, or the Magpul afg 2. Grip is essentially the same on either and both are better than none at all. I choke down on the grip toward the muzzle - I've seen this called the "keyhole grip". Might get a stubbier version, but I haven't noticed this one hanging up on stuff to justify the expense. Anybody else have a preference?

http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20160607_232051.jpg (http://s997.photobucket.com/user/Joelski144/media/ARs%20and%20Pistols/MK%2018/20160607_232051.jpg.html)

Have you looked at the arisaka vfg? Not sure what attachment options he's got now, I've got one , well on the kids rifle now and I haven't used any others but it's not overly big and good quality as usual

[Joelski]

Have you looked at the arisaka vfg? Not sure what attachment options he's got now, I've got one , well on the kids rifle now and I haven't used any others but it's not overly big and good quality as usual

I do like the looks of it. I'm on the hunt to replace that old magpul handstop. I'm diggin the Noveske and SLR ones; gotta decide which one.

[alamo5000]

I'm diggin the Noveske and SLR ones; gotta decide which one.

Which SLR one are you looking at?

[Joelski]

Which SLR one are you looking at?

Well, I guess its going to be the Noveske K9, since SLR doesn't seem to make their devices with a Picatinny mount. That said, being an SBR, UW's idea of using the VFG as a rest probably will work best.

[alamo5000]

Well, I guess its going to be the Noveske K9, since SLR doesn't seem to make their devices with a Picatinny mount. That said, being an SBR, UW's idea of using the VFG as a rest probably will work best.

If you had an MLok rail I was thinking about making your life a little easier :)

[Joelski]

If you had an MLok rail I was thinking about making your life a little easier :)

I do, but I don't think there'd be room with the VFG. Thanks for the offer though!

[voodoo_man]

http://i.imgur.com/UguD6kh.jpg (http://www.vdmsr.com/2016/06/sbr.html)

[Stickman]

https://c6.staticflickr.com/2/1612/25081102245_7239e15ec6_b.jpg (https://flic.kr/p/EdkcTk)Stickman (https://flic.kr/p/EdkcTk) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr

[gatordev]

https://c4.staticflickr.com/8/7430/27713697035_ac41428120_b.jpg

[Joelski]

https://c4.staticflickr.com/8/7430/27713697035_ac41428120_b.jpg

Obviously, that's so far beneath you its laughable. Go ahead and box it up and send it to me and I'll make sure you aren't humiliated by being associated with such a sub-standard clunker.

[:D] Nicely done!

[gatordev]

Thanks!

Unfortunately, I'm on an expense lock-down due to moving/new house, so postage is not in the budget and I'll have to keep it on hand. I'm sure you'll understand.

[Joelski]

https://falconain.files.wordpress.com/2011/02/little-baby-pouting.jpg

[UWone77]

https://falconain.files.wordpress.com/2011/02/little-baby-pouting.jpg

That looks like James as a kid.

[Dstrbdmedic167]

That looks like James as a kid.

How'd I get pulled into this?


Sent from my iPhone using Tapatalk

[Cotton68spc]

How'd I get pulled into this?


Sent from my iPhone using Tapatalk

LOL how he get your baby pic

[Joelski]

It's from the playground. Miffed after being denied the tricycle-bourne, NERF rocket technical.

[Former11B]

https://c4.staticflickr.com/8/7430/27713697035_ac41428120_b.jpg

Sometimes less is more...diggin' the simplicity. Good looking rifle

[Slippers]

LMT MRP CQB 10.5.

http://i.imgur.com/BmLp5q4.jpg

[gatordev]

Sometimes less is more...diggin' the simplicity. Good looking rifle

Thanks!

[fledge]

Working on my PDW. This isn't the right lower but it has the PDW stock on it for now to determine OAL.

http://i1291.photobucket.com/albums/b556/fledge2000/PDW/A65F043B-4B75-43E5-B87A-99664DBF6575_zpsau7uzwzb.jpg (http://s1291.photobucket.com/user/fledge2000/media/PDW/A65F043B-4B75-43E5-B87A-99664DBF6575_zpsau7uzwzb.jpg.html)

http://i1291.photobucket.com/albums/b556/fledge2000/PDW/3214C65F-4EAF-44B5-9FC4-765BD5D6D1F3_zpsbvghmjsa.jpg (http://s1291.photobucket.com/user/fledge2000/media/PDW/3214C65F-4EAF-44B5-9FC4-765BD5D6D1F3_zpsbvghmjsa.jpg.html)

[Jerry R]

Nice ! What optic / sights will go on it?

[fledge]

Not sure on sights yet. For a low drag, beater pack rifle, the polymer Magpul BUIS may be best. Still figuring out a few more details first. If I can shave .5-.75" off OAL, I'll be golden with the PDW stock. Otherwise it's too long for my purposes and may need go Law Tactical instead.

[fledge]

Tinkering with the PDW. Here is the upper on the VSeven Enlightened lower. That SMOS upper receiver is almost a perfect match on the V7.

A5 buffer. 6.5" 300blk barrel. SLR 7.5" rail. MI linear comp.

http://i1291.photobucket.com/albums/b556/fledge2000/PDW/DD04F186-4BD4-45B8-AE94-B2AE2C8ED074_zps9sbljlt3.jpg (http://s1291.photobucket.com/user/fledge2000/media/PDW/DD04F186-4BD4-45B8-AE94-B2AE2C8ED074_zps9sbljlt3.jpg.html)

With MBUS:

http://i1291.photobucket.com/albums/b556/fledge2000/PDW/CB32F6C0-2C09-4E9D-83F5-3C109B8F8FC6_zpsphfzampn.jpg (http://s1291.photobucket.com/user/fledge2000/media/PDW/CB32F6C0-2C09-4E9D-83F5-3C109B8F8FC6_zpsphfzampn.jpg.html)

[alamo5000]

http://i1320.photobucket.com/albums/u538/Alamo_5000/IMGP0254_zpsbjhdj7dc.jpg

[alamo5000]

http://i1320.photobucket.com/albums/u538/Alamo_5000/IMGP0244_zpszdfhl6kz.jpg

[Deadwing]

Nice, alamo! What barrel are you using? And how do you like it so far?

[alamo5000]

Nice, alamo! What barrel are you using? And how do you like it so far?

I bought a Silencerco barrel a long time ago because it was the only one I could find in 1/2x28. Since I will use more than one host weapon I didn't want to constantly swap out the piston.

The barrel itself is great. I was actually quite impressed by it.

As for the suppressor I've had it home since about 2pm and I put maybe 100++ rounds through it and I love it. It's seriously just bad ass. With supers its still really nice but with subs it's frickin' ridiculous. It is very nice. I tried it in the K configuration too and it was a big enough difference in sound that I could notice it but I will do a whole lot more testing with it for sure.

Since I've never owned a pistol suppressor before I will eventually try to do some controlled tests to figure out POI shift and all that. So far I am very happy with my choice.

I also want to test it out on a .22 pistol and if I can round up one with a threaded barrel a .22 rifle.

All I know is with 9mm subs that thing is DAMN quiet. I am enjoying the hell out of it.

I will take more photos later. The ones above were pretty much just quick snapshots.

[Deadwing]

I bought a Silencerco barrel a long time ago because it was the only one I could find in 1/2x28. Since I will use more than one host weapon I didn't want to constantly swap out the piston.

The barrel itself is great. I was actually quite impressed by it.

As for the suppressor I've had it home since about 2pm and I put maybe 100++ rounds through it and I love it. It's seriously just bad ass. With supers its still really nice but with subs it's frickin' ridiculous. It is very nice. I tried it in the K configuration too and it was a big enough difference in sound that I could notice it but I will do a whole lot more testing with it for sure.

Since I've never owned a pistol suppressor before I will eventually try to do some controlled tests to figure out POI shift and all that. So far I am very happy with my choice.

I also want to test it out on a .22 pistol and if I can round up one with a threaded barrel a .22 rifle.

All I know is with 9mm subs that thing is DAMN quiet. I am enjoying the hell out of it.

I will take more photos later. The ones above were pretty much just quick snapshots.

Awesome! The first time i shot 9mm subs suppressed, i had a little giggle fit. It was so damn quiet i couldn't believe it lol.

And thanks for the barrel info. I've been wanting to pick up some threaded barrels to increase the number of hosts available, and SiCo seems to offer the best barrel for the money, unless a really good deal can be found on a factory barrel from HK, Sig, etc.

[Dstrbdmedic167]

Shooting subs period is fun. I too have a silencerco barrel in my g19.



Sent from my iPhone using Tapatalk

[alamo5000]

Shooting subs period is fun. I too have a silencerco barrel in my g19.



Sent from my iPhone using Tapatalk

They are seriously not bad at all. The one I have is a really good shooter. Plus try finding a 1/2x28 barrel for a 226... not much choice... but I am glad I got it to be honest.

[SINNER]

My Sig 226 S4 came with a factory barrel threaded in 1/2x28. I know they used to sell the barrel as a replacement part as my brother in law got one directly from Sig.

[Jerry R]

https://c3.staticflickr.com/8/7065/27865833746_7049434667_o.jpg (https://flic.kr/p/JspFxq)IMG_1057 Team Ghost OOB (https://flic.kr/p/JspFxq) by Jerry R (https://www.flickr.com/photos/9663868@N05/), on Flickr

[Jerry R]

Okay, last one for awhile ...

https://c7.staticflickr.com/8/7342/27913814846_a5e75aa2de_o.jpg (https://flic.kr/p/JwDADL)IMG_2319Tac-SolSuppressed OOB (https://flic.kr/p/JwDADL) by Jerry R (https://www.flickr.com/photos/9663868@N05/), on Flickr

[Uffdaphil]

Just finished my second SBR. Swapping uppers gets old fast. One more lower and two suppressors in the pipeline. Still keeping a pistol lower for the 7.5 to carry in the truck.Too bad a can won't fit in the chopped KMR.

http://i150.photobucket.com/albums/s92/uffdaphil/image_32.jpeg (http://s150.photobucket.com/user/uffdaphil/media/image_32.jpeg.html)

[UWone77]

Just finished my second SBR. Swapping uppers gets old fast. One more lower and two suppressors in the pipeline. Still keeping a pistol lower for the 7.5 to carry in the truck.Too bad a can won't fit in the chopped KMR.

http://i150.photobucket.com/albums/s92/uffdaphil/image_32.jpeg (http://s150.photobucket.com/user/uffdaphil/media/image_32.jpeg.html)

Nice WEVO Mag... Your SBR's look great.

[UWone77]

Not an SBR yet, just submitted my Form 1.

1362

[Stickman]

https://c2.staticflickr.com/2/1672/24166232449_a2b7983f97_b.jpg (https://flic.kr/p/CPufYa)Stickman (https://flic.kr/p/CPufYa) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr

[Dstrbdmedic167]

I'll just leave this here...

1397

[Former11B]

https://c2.staticflickr.com/2/1672/24166232449_a2b7983f97_b.jpg (https://flic.kr/p/CPufYa)Stickman (https://flic.kr/p/CPufYa) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr

I like the rifle but I can't bring myself to like that magwell grip/funnel.

[Joelski]

I like the rifle but I can't bring myself to like that magwell grip/funnel.

Agree with this. It's like putting a cheap ground effects kit on a classic sports car.

[Jerry R]

I'll just leave this here...

1397

Where did you leave it? I'll be right there to get it !!!!!!!

NICE !

[Dstrbdmedic167]

Where did you leave it? I'll be right there to get it !!!!!!!

NICE !

Haha thanks Jerry!


Sent from my iPhone using Tapatalk

[mustangfreek]

I'll just leave this here...

1397

Nice looking blaster as long as it's not that 277...[BD].....lol

Looks long as hell with that can though..

Coming from a guy with no nfa toys...lol

[UWone77]

Nice looking blaster as long as it's not that 277...[BD].....lol

Looks long as hell with that can though..

Coming from a guy with no nfa toys...lol

Haha!! I think James dumped all of his .277

[Dstrbdmedic167]

Haha!! I think James dumped all of his .277

I did. Strictly 556 or 300blk for ease of ammo availability. Just don't have the time to reload like I used too.


Sent from my iPhone using Tapatalk

[mustangfreek]

Haha..was kinda joking..

I thought you said the wolvy was the shizznit...still nice looking rifle though

[Dstrbdmedic167]

Haha..was kinda joking..

I thought you said the wolvy was the shizznit...still nice looking rifle though

Never said it wasn't but when you don't have time to reload for it, it's time to move on.


Sent from my iPhone using Tapatalk

[schambers]

http://www.weaponevolution.com/forum/attachment.php?attachmentid=1438&d=1468695027

[schambers]

http://www.weaponevolution.com/forum/attachment.php?attachmentid=1440&d=1468695122

[Former11B]

1446


FRP with CCI standard velocity. Subsequent rounds had no signature. You can see some at the ejection port as well. Sig 1911-.22 and Innovative Arms .22 can

It was really late/dark when I took the video. Just thought the flame from the can was cool

[Stickman]

https://c8.staticflickr.com/9/8798/27826109263_fc1a356ab8_b.jpg (https://flic.kr/p/JoU5Qx)Stickman (https://flic.kr/p/JoU5Qx) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr

[Stickman]

https://c2.staticflickr.com/9/8834/28363697441_38c95e352c_b.jpg (https://flic.kr/p/Kdpn5e)Stickman (https://flic.kr/p/Kdpn5e) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr

[voodoo_man]

http://i.imgur.com/y2vNlEY.jpg (http://www.vdmsr.com/2016/08/gemtech-one.html)

[Stickman]

https://c6.staticflickr.com/9/8741/28352671213_803a1b366b_b.jpg (https://flic.kr/p/KcqRmR)Stickman (https://flic.kr/p/KcqRmR) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr

[gatordev]

https://c6.staticflickr.com/9/8886/29332883541_dbeb9189f0_b.jpg The Bird is the Word by D T, on Flickr

[Former11B]

It's been pouring here for 24+ hours. That picture sums up how I feel at the moment

[jdhill]

1628

[Deadwing]

Colt 6933, Geissele SSA, Magpul MOE, B5 SOPMOD. A real basic blaster, and my new favorite SBR to shoot. This image was a lot more crisp before i used whatever POS app i loaded on my phone to blur the S/N. Oh well...

http://i95.photobucket.com/albums/l145/Deadwing76/6E115061-DFFC-49E6-8236-B0A9CF08CC3E_zpsupbyeps1.jpg (http://s95.photobucket.com/user/Deadwing76/media/6E115061-DFFC-49E6-8236-B0A9CF08CC3E_zpsupbyeps1.jpg.html)

[Stickman]

1758

[voodoo_man]

http://i.imgur.com/CkOoAmU.jpg (http://www.vdmsr.com/2016/10/hard-to-find-things.html)

[UWone77]

1767

[alamo5000]

1767

Nice! Once you shoot that thing do a little write up or let us know how she acts. Looks interesting.

[UWone77]

Nice! Once you shoot that thing do a little write up or let us know how she acts. Looks interesting.

Just got Form 3 approved, so if I have time I might get to the Form 4 next week.... it's gonna be awhile.

[alamo5000]

Just got Form 3 approved, so if I have time I might get to the Form 4 next week.... it's gonna be awhile.

Ah. No problem. I've been working on my 10/22 and doing various things to it... I recently sanded out and polished up the inside of the reciever... it made the action move so much smoother...Now it feeds much more reliably (still not perfect)... I have about 2000 rounds of .22 so I have been tinkering with that the most lately.

[gatordev]

https://c6.staticflickr.com/9/8122/30155668485_c6970a7cfb_b.jpg

[Former11B]

https://c6.staticflickr.com/9/8122/30155668485_c6970a7cfb_b.jpg


Oh yes

[gatordev]

And now to zero...

https://c1.staticflickr.com/6/5466/29527144584_bf1fdaec2d_b.jpg

[Former11B]

And now to zero...

https://c1.staticflickr.com/6/5466/29527144584_bf1fdaec2d_b.jpg


And now to post more than a teaser pic!

I think Ops/AE cans are the epitome of how a cab should look (and perform). Clean, simple...Always liked them.

[gatordev]

And now to post more than a teaser pic!


Very well...

https://c7.staticflickr.com/9/8535/29946453470_c70eefd456_b.jpg

[gatordev]

Yikes, that looks considerably more blurry than the original. Looks like Flickr is doing something with their linking.

[Former11B]

Yikes, that looks considerably more blurry than the original. Looks like Flickr is doing something with their linking.

Photobucket started crushing my resolution on the photos I uploaded so I started loading them directly onto WEVO.

Rifle looks awesome, btw

[Joelski]

Very well...

https://c7.staticflickr.com/9/8535/29946453470_c70eefd456_b.jpg

Black doesn't cammo against green very well. When were you planning to cut the lawn?

[:D]

Sweet stick! Is that a note from Mom to the bad guys on the stock?

[gatordev]

Photobucket started crushing my resolution on the photos I uploaded so I started loading them directly onto WEVO.

Rifle looks awesome, btw

Yeah, that's why I switched to Flickr. That and the annoying load times and pop ups. I'm thinking Flickr may be playing with their compression now, as even when I look at it on their site and blow it up to full rez, the etching on the rail looks horrible compared to the original I uploaded (which was a raw exported to a very high quality JPG).

But thanks! Independent of the can, that rifle just continues to be stupid accurate. I continue to be a Centurion fan-boy.


Black doesn't cammo against green very well. When were you planning to cut the lawn?

[:D]

Sweet stick! Is that a note from Mom to the bad guys on the stock?

Something like that. I think it says something like, "Hold here for hits."

The lawn was mowed yesterday, post-hurricane. We just have manly grass down here.

[Former11B]

Barrel specs? 18" 1:7? What's it's preferred load

And is that a NF 1-4 or 2.5-10x24?

And it would be the icing on the cake if you rattle canned that beast

[gatordev]

18" Douglas 1:7. It doesn't have any markings, but since Centurion Arms advertises it as "These are Crane Spec. MK12 barrels." one assumes they're Douglas barrels. I've run BH blue box 77gr through it and it loved it, but for the last year or so, I've been running IMI 77gr MK262 clone ammo through it and it's been solid out to 500y. At 600y, it doesn't seem to be quite as solid as the BH, but honestly, I've only had the opportunity to take it out that far twice, and one time there was some decent swirling winds, so I can't discount shooter issues.

NF is a 2.5-10x24 I got last year when they re-released them. I'm struggling to not buy another, as they're coming out again. Oh, and I was going to paint it, but I can't paint the optic out of self-preservation, so for now, I'll hold off on the whole thing. But it's tempting.

[UWone77]

18" Douglas 1:7. It doesn't have any markings, but since Centurion Arms advertises it as "These are Crane Spec. MK12 barrels." one assumes they're Douglas barrels. I've run BH blue box 77gr through it and it loved it, but for the last year or so, I've been running IMI 77gr MK262 clone ammo through it and it's been solid out to 500y. At 600y, it doesn't seem to be quite as solid as the BH, but honestly, I've only had the opportunity to take it out that far twice, and one time there was some decent swirling winds, so I can't discount shooter issues.

NF is a 2.5-10x24 I got last year when they re-released them. I'm struggling to not buy another, as they're coming out again. Oh, and I was going to paint it, but I can't paint the optic out of self-preservation, so for now, I'll hold off on the whole thing. But it's tempting.

I find the 2.5-10x24 NF one of the most unforgiving optics out there, which is why I stuck to the x32. Bless you guys who can effectively use them.

[Joelski]

Gator: you out of NAS JAX? I heard the storm was bad enough, but didn't score any big hits.

[gatordev]

I find the 2.5-10x24 NF one of the most unforgiving optics out there, which is why I stuck to the x32. Bless you guys who can effectively use them.

That they are, but I also find it enforces the muscle memory of getting a firm cheek weld, and then it works fine. Pays off when going to other optics, as well, at least for me.


Gator: you out of NAS JAX? I heard the storm was bad enough, but didn't score any big hits.

I work out of both bases. Jax had some trees down, but haven't made it down to the flight line yet (don't think there was much of note, though). Mayport got clobbered, but I haven't been there yet to see the extent. They're up and running now, though.

[Former11B]

Silent but violent

1818

[Jerry R]

Older photo taken before I returned the EOTech HWS units. LWRC Factory SBR in 6.8 with a matching upper in 5.56. I kept the EOTech 3x - it works well with the AimPoint PRO units. At the time of purchase AAC also offered their M4-2000 in 6.8, so the cans are both caliber specific.
https://c3.staticflickr.com/6/5622/30113171370_38642cea65_o.jpg (https://flic.kr/p/MSZSHQ)IMG_1637LWRC with EOTech (https://flic.kr/p/MSZSHQ) by Jerry R (https://www.flickr.com/photos/9663868@N05/), on Flickr

[Deadwing]

Very well...

https://c7.staticflickr.com/9/8535/29946453470_c70eefd456_b.jpg

That is badass. Very nice, Gator.

[Deadwing]

Older photo taken before I returned the EOTech HWS units. LWRC Factory SBR in 6.8 with a matching upper in 5.56. I kept the EOTech 3x - it works well with the AimPoint PRO units. At the time of purchase AAC also offered their M4-2000 in 6.8, so the cans are both caliber specific.
https://c3.staticflickr.com/6/5622/30113171370_38642cea65_o.jpg (https://flic.kr/p/MSZSHQ)IMG_1637LWRC with EOTech (https://flic.kr/p/MSZSHQ) by Jerry R (https://www.flickr.com/photos/9663868@N05/), on Flickr

Twins! Nice, Jerry! Are you running PROs on both uppers now? I kept my EOTech EXPS3. I haven't had any issues with it. I just wish it was tan instead of black.

[gatordev]

Thanks!

[Jerry R]

Twins! Nice, Jerry! Are you running PROs on both uppers now? I kept my EOTech EXPS3. I haven't had any issues with it. I just wish it was tan instead of black.

Thanks. Yes, PRO units on both. The EOTech refund was enough to replace all five EOTech units with AimPoints and have a little change left over.

[Deadwing]

Thanks. Yes, PRO units on both. The EOTech refund was enough to replace all five EOTech units with AimPoints and have a little change left over.

Lucky for me, i've only got one EOTech that i paid for. The other is a beat up (but still functional) 512 that was included with my Colt 6933 (bought used).

[UWone77]

Still waiting for my factory DD MK18 to be approved, but until then, I threw my other CQBR2 Upper on my Rainier SBR lower

1870

[Deadwing]

Still waiting for my factory DD MK18 to be approved, but until then, I threw my other CQBR2 Upper on my Rainier SBR lower

1870

Nice! I finally added KAC sights to mine. I dig the FDE furniture. I keep debating whether to switch mine from black to FDE. At any rate, it's one of my favorites to shoot!

[Joelski]

I gotta start reloading. Availability is more of a problem than the cost; I don't want to run low, much less out. My shorty clone is also my favorite shooter ever!

http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20160903_151642_edit_1477129898752.jpg (http://s997.photobucket.com/user/Joelski144/media/ARs%20and%20Pistols/MK%2018/20160903_151642_edit_1477129898752.jpg.html)

[UWone77]

Nice! I finally added KAC sights to mine. I dig the FDE furniture. I keep debating whether to switch mine from black to FDE. At any rate, it's one of my favorites to shoot!

I went with the all Black DD MK18 as far as my factory SBR goes. I've got the parts ready for a clone gun in Black.

1874

[Deadwing]

I went with the all Black DD MK18 as far as my factory SBR goes. I've got the parts ready for a clone gun in Black.

1874

Nicely done, UW. Two is one, and one is none! Mine is a mutt lol. I've got the FDE rail, FDE KAC front sight, black everything else. And no PEQ...yet. [BD] Those things are stupid expensive, even in the reduced power "civilian" versions. I may go FDE pistol grip and SOPMOD and see how that looks. But my EOTech is black, so it'll still be a mutt. But i love it. My MK18 MOD 0 is much closer to "correct", except i used an ADM mount for the Aimpoint instead of the Wilcox mount.

[Deadwing]

SilencerCo Octane 45K mounted on the end of a Heckler & Koch Mark 23. These two look like they were made for each other.

http://i95.photobucket.com/albums/l145/Deadwing76/F50AD4A2-A911-4D5D-8AD6-532481759517_zpsxoxapnvp.jpg (http://s95.photobucket.com/user/Deadwing76/media/F50AD4A2-A911-4D5D-8AD6-532481759517_zpsxoxapnvp.jpg.html)

[UWone77]

Nicely done, UW. Two is one, and one is none! Mine is a mutt lol. I've got the FDE rail, FDE KAC front sight, black everything else. And no PEQ...yet. [BD] Those things are stupid expensive, even in the reduced power "civilian" versions. I may go FDE pistol grip and SOPMOD and see how that looks. But my EOTech is black, so it'll still be a mutt. But i love it. My MK18 MOD 0 is much closer to "correct", except i used an ADM mount for the Aimpoint instead of the Wilcox mount.

I thought you had a 10.5" barrel on that instead of a 10.3... you know the cloner community will eat you alive for that! [:D]

[Deadwing]

I thought you had a 10.5" barrel on that instead of a 10.3... you know the cloner community will eat you alive for that! [:D]

Yeah, yeah, yeah. [BD] I've read varying accounts of what's acceptable for a MK18 Mod 0, and a 10.5" LMT is one of them. So the clone Nazis can go pound sand. [BD] My RIS II equipped upper has a 10.3" DD barrel, but the gas port is commercial spec and not the smaller milspec version, so i'm sure they'd whine about that too lol.

[UWone77]

http://i1016.photobucket.com/albums/af282/richdkim77/5S3A4208_zpsjzmgkuyk.jpg (http://s1016.photobucket.com/user/richdkim77/media/5S3A4208_zpsjzmgkuyk.jpg.html)

[Pyzik]

http://i1016.photobucket.com/albums/af282/richdkim77/5S3A4208_zpsjzmgkuyk.jpg (http://s1016.photobucket.com/user/richdkim77/media/5S3A4208_zpsjzmgkuyk.jpg.html)

That's my favorite AR you post, easily. I plan on replicating it. Starting with a brace instead of a stock of course (shit, then I can't do a vertical grip... that just dawned on me) and no DBAL. It'll be an SBR eventually.

[UWone77]

That's my favorite AR you post, easily. I plan on replicating it. Starting with a brace instead of a stock of course (shit, then I can't do a vertical grip... that just dawned on me) and no DBAL. It'll be an SBR eventually.

Just got the other factory MK18 approved in all black, I'll build it up as twins. They are fun shooters. Trying to find a RIS II rail in the wild right now though... wow... I just saw Ben at AR15news unload a used one for $550.

[SwissyJim]

out for a walk in the woods with my backpack gun
1887

Kinda suprised at how well a smartphone camera is! (just go tmy first smartphone sadly enough...)

[Deadwing]

http://i1016.photobucket.com/albums/af282/richdkim77/5S3A4208_zpsjzmgkuyk.jpg (http://s1016.photobucket.com/user/richdkim77/media/5S3A4208_zpsjzmgkuyk.jpg.html)

I second what Pyzik said. That shot in particular is pretty awesome. And may i say that upper looks f@#$ing sick with the can! I want to get a Surfire can for my MK18, but can't justify the coin right now. Maybe down the road...

And congrats on the recently approved factory MK18!

[Deadwing]

out for a walk in the woods with my backpack gun
1887

Kinda suprised at how well a smartphone camera is! (just go tmy first smartphone sadly enough...)

Nice! What color is the Cerakote? Burnt bronze or something along those lines?

[Pyzik]

out for a walk in the woods with my backpack gun
1887

Kinda suprised at how well a smartphone camera is! (just go tmy first smartphone sadly enough...)

Nice!
What phone? iPhones actually take pretty great pictures.

[SwissyJim]

Nice! What color is the Cerakote? Burnt bronze or something along those lines?
It would be considered 'Dark' Bronze... before Cerakote offered that color, my guy made it hisself with 25% black added to the Burnt Bronze color. But now Cerakote actually has that color available he says since so many people were making themselves.


Nice!
What phone? iPhones actually take pretty great pictures.
Samsung Galaxy S5 Active... I'm kinda an anti-Apple guy [BD]

HEY! Just noticed Law Tactical reposted my first Instagram post! I'm famous!! LOL

[Pyzik]

It would be considered 'Dark' Bronze... before Cerakote offered that color, my guy made it hisself with 25% black added to the Burnt Bronze color. But now Cerakote actually has that color available he says since so many people were making themselves.


Samsung Galaxy S5 Active... I'm kinda an anti-Apple guy [BD]

HEY! Just noticed Law Tactical reposted my first Instagram post! I'm famous!! LOL
Woohoo!

I'm anti-apple too. Have a Note 4, just saying apple does beat Android in the camera department.

Sent from my SM-N910V using Tapatalk

[SwissyJim]

Woohoo!

I'm anti-apple too. Have a Note 4, just saying apple does beat Android in the camera department.

Sent from my SM-N910V using Tapatalk

Well, with my eye for composition, lighting and other such nonsensical crap, it won't matter that the Droids are lacking! I'm just happy to not have to lug around the old, HUGE point and shoot I've been using up till now [crazy]

[Joelski]

Woohoo!

I'm anti-apple too. Have a Note 4, just saying apple does beat Android in the camera department.

Sent from my SM-N910V using Tapatalk

I beg to differ. Apple maybe has better processing, but Samsung has the hardware edge. Eventually, smartphones will shoot in RAW format, but until then, you will assail me with terminology alien to my layman skills, as my eyes glaze over anytime somebody starts talking about Apple's superiority to anything. [:)]

[SINNER]

Last time I checked they were not banning Apple products from airplanes. Just saying. LMFAO Samsung phones suck. So damn fragile even in a case they constantly fail.

[GOST]

Remember Apple is against your invasion of privacy while Google sells your information.

[UWone77]

Remember Apple is against your invasion of privacy while Google sells your information.

Great point.

I like Apple products only because they're easy to use IMHO. However, when you look at the news section, even if you try to change the settings, it always lists all the articles from the organizations that Shill for the Democrats. CNN, Washington Post, Huffington Post, ect. Should leave the politics out of it.

Anyhow...

1892

[Joelski]

Last time I checked they were not banning Apple products from airplanes. Just saying. LMFAO Samsung phones suck. So damn fragile even in a case they constantly fail.
Glass house much? Apple is no stranger to incendiary events.

[GOST]

The Note 7 has been banned from American flights and there is a case of a reported iPhone burning a car in Australia. Neither are NFA items though.

[Former11B]

Anyhow...

1892

Its only gay if they touch.


I'm glad they changed the endcap weld position from the 212 to the SOCOMs. It looked a little booger-y where it was.

[Joelski]

The Note 7 has been banned from American flights and there is a case of a reported iPhone burning a car in Australia. Neither are NFA items though.

It's cool Mr. G. We were just discussing the incendiary properties of Chinese vs. S. Korean AOW's. [:D]

[Jerry R]

Just a quick shot for a friend - his new VP-9 Tactical

https://c2.staticflickr.com/6/5335/30608402025_dc737cfa07_o.jpg (https://flic.kr/p/NCL4xp)IMG_2222 VP-9 With AAC (https://flic.kr/p/NCL4xp) by Jerry R (https://www.flickr.com/photos/9663868@N05/), on Flickr

[UWone77]

Some MK18 action.

1899

[gatordev]

Still waiting for the MK18s to show up in that picture. (ZING!)

[UWone77]

Still waiting for the MK18s to show up in that picture. (ZING!)

LOL this is about as close as I'm getting.

I can't do the hard core clones... plus is it really a clone without the third pin?

[gatordev]

LOL this is about as close as I'm getting.

I can't do the hard core clones... plus is it really a clone without the third pin?

I'm more picking on your (Daniel Defense's) use of the nomenclature. Well...and making fun of your 10.5" barrel.

[UWone77]

I'm more picking on your (Daniel Defense's) use of the nomenclature. Well...and making fun of your 10.5" barrel.

Thought about cutting it down to 10.3" but ... I'm not. Maybe if I was starting from scratch. That's a factory 10.5" LMT Upper, so I'm going to leave it like that.

[gatordev]

Thought about cutting it down to 10.3" but ... I'm not. Maybe if I was starting from scratch. That's a factory 10.5" LMT Upper, so I'm going to leave it like that.

I figured it was your LMT and I wouldn't bother. I actually don't think you can cut it down as it's not enough to rethread the crown. Don't worry, we'll keep you around, though, even though we know you disrespect the clone gods.

[Thompson]

https://c2.staticflickr.com/6/5603/30512758242_3890708eca_h.jpg (https://flic.kr/p/NuiRYE)

[Joelski]

Thought about cutting it down to 10.3" but ... I'm not. Maybe if I was starting from scratch. That's a factory 10.5" LMT Upper, so I'm going to leave it like that.
Best thing in the world is when a real life BTDT frogman type says ".2" doesn't matter. Just use an LMT barrel". True story. A lot of those guys like LMT more than anything else.

[Deadwing]

I figured it was your LMT and I wouldn't bother. I actually don't think you can cut it down as it's not enough to rethread the crown. Don't worry, we'll keep you around, though, even though we know you disrespect the clone gods.

You can add my name to the list of heathens who disrespect the clone gods as well lol. [BD]

[gatordev]

You can add my name to the list of heathens who disrespect the clone gods as well lol. [BD]

I know. You're name has already been notated. Thanks for hating America.

[UWone77]

I know. You're name has already been notated. Thanks for hating America.

Plus you see Deadwing using an ADM Mount? It's blasphemy! At least find a QRP or of course the much more correct Wilcox Mount! [:D]

[Deadwing]

I know. You're name has already been notated. Thanks for hating America.

Do we get a newsletter or membership card or something? Of course, if you're up to the task, i'd be more than happy to provide you with my shipping address so you can send me the correct components to bring my weapons up to standards. :P



Plus you see Deadwing using an ADM Mount? It's blasphemy! At least find a QRP or of course the much more correct Wilcox Mount! [:D]

Funny thing is, i had the optic in a QRP mount and took it out with the intent of putting it in a Wilcox. I then used the QRP base on a Primary Arms M4 knock-off, and gave up on the Wilcox and bought an ADM. I actually like the ADM better than the Wilcox or the QRP. Double blasphemy. [BD]

[UWone77]

1943

[UWone77]

2005

[Former11B]

1943

Why do you do this to me

[UWone77]

Why do you do this to me

4" .22 barrels with cans are about the most fun you can have with a SBR.

[Pyzik]

http://uploads.tapatalk-cdn.com/20161107/a8bb2c57370a7d1d4197e79dbd6f689a.jpg

https://vimeo.com/190486338

Sent from my SM-N910V using Tapatalk

[alamo5000]

https://vimeo.com/190486338




Awesome!!!

[Pyzik]

Awesome!!!
Was a freaking awesome day.

Shooting a suppressed full auto AK kinda sucks, talk about eating gas.

Sent from my SM-N910V using Tapatalk

[Former11B]

4" .22 barrels with cans are about the most fun you can have with a SBR.

It's my plan, just can't do it right away

[Dstrbdmedic167]

http://uploads.tapatalk-cdn.com/20161108/c4225e1fc779ff5f6a22932b322cf9bc.jpg


Sent from my iPhone using Tapatalk

[Pyzik]

http://uploads.tapatalk-cdn.com/20161108/c4225e1fc779ff5f6a22932b322cf9bc.jpg


Sent from my iPhone using Tapatalk
Moar

Sent from my SM-N910V using Tapatalk

[Dstrbdmedic167]

Moar

OK...

2042

[Pyzik]

I need that little M&P.

Sent from my SM-N910V using Tapatalk

[Former11B]

2044

[Pyzik]

https://c6.staticflickr.com/6/5793/30871115965_a4e5743218_b.jpg (https://flic.kr/p/P2Yxf6)
AC15 Smokin' (https://flic.kr/p/P2Yxf6) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

[Slippers]

http://i.imgur.com/8rC1k5q.jpg

[Pyzik]

http://i.imgur.com/8rC1k5q.jpg

I love your pics. Not sure why you don't post more. I'm assuming that is your garage floor? Perfect set up.

https://c4.staticflickr.com/6/5484/30992504155_7a78e5046b_b.jpg (https://flic.kr/p/PdGFHV)
KV-13 (https://flic.kr/p/PdGFHV) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

[Slippers]

Thanks. It is my garage floor. It has good natural lighting during a specific time of day. I'm a one trick pony for my photos, though. :)

I don't post more because I'm too busy with Arisaka!

[Axlnut]

Thanks. It is my garage floor. It has good natural lighting during a specific time of day. I'm a one trick pony for my photos, though. :)

I don't post more because I'm too busy with Arisaka!

Great backdrop. I have 0 concrete, or even blacktop without driving somewhere. Just wood, grass, dirt. Frustrating at times.

[alamo5000]

Great backdrop. I have 0 concrete, or even blacktop without driving somewhere. Just wood, grass, dirt. Frustrating at times.

What? Is there something wrong with wood, grass, and dirt? [:D]

I don't have any concrete to speak of either. It doesn't hurt my feelings at all, especially being able to walk out the back door and shoot off the back porch.

[UWone77]

2115

[UWone77]

2131

[Pyzik]

2131
I hope like hell I get a decent bonus this year. I need a suppressor

Sent from my SM-G930V using Tapatalk

[Former11B]

2131


About time the SDN6 got the boot [:D]

[Cotton68spc]

Hunting with the Saker 762http://uploads.tapatalk-cdn.com/20161123/85d3335f00fb3d9d079f297f09cdbc65.jpg


Sent from my iPhone using Tapatalk

[Former11B]

From a while back one range day

2166

[UWone77]

About time the SDN6 got the boot [:D]

Nevah!!!!!

[UWone77]

2215

[voodoo_man]

http://i.imgur.com/7cHCzvT.jpg (http://www.vdmsr.com/2016/11/few-of-my-favorite-things.html)

[Dstrbdmedic167]

2235

[SINNER]

http://i.imgur.com/7cHCzvT.jpg (http://www.vdmsr.com/2016/11/few-of-my-favorite-things.html)

Killer shot




2235




Why the subsonic ammo? I thought the Mist was ported to drop all ammo to sub velocities.

[Dstrbdmedic167]

Why the subsonic ammo? I thought the Mist was ported to drop all ammo to sub velocities.

It was just for photos..

[SINNER]

Poser...




LOL

[din]

2246

Not a perty photo like y'all do, but I just got this little gal finished. Finally got the problems with my BAD-CASS ST sorted out, now I just have to take her to the range for a test drive before I put on the suppressor mount.

[GOST]

Good looking assembly, what issue did you have with the selector?

[din]

Good looking assembly, what issue did you have with the selector?

They changed something when they started using the TiNi coated centers so the short throw selectors didn't work with Geissele and LaRue triggers. I ended up taking the selector out of my Battle Kitty build and using that. I guess they went back to phosphated centers so I RMAed the TiNi coated one and exchanged it. Battle Kitty is currently using a Knight's selector since one of the screw heads broke off when I was putting the new center, and I haven't figured out how to get the broken piece out of the center.

[fledge]

Very clean, din!

I have the same issue with a BAD safety. I switch it to a lower with a CMT trigger. BAD blamed Geissele for it but it looks like they sorted it out themselves.

[Dstrbdmedic167]

Poser...


LOL

Whatever...


Sent from my iPhone using Tapatalk

[Cotton68spc]

Whatever...


Sent from my iPhone using Tapatalk

In boner defense here is video of a custom mist shooting subsonic

https://vimeo.com/194040231


Sent from my iPhone using Tapatalk

[Former11B]

It was just for photos..

Gemtech barrel/suppressor, Gemtech ammo......I'm with you

[UWone77]

2253

[voodoo_man]

http://i.imgur.com/eOjDvNG.jpg (http://www.vdmsr.com/2016/12/g-core-goodness.html)

[fledge]

Picked it up today.

http://i1291.photobucket.com/albums/b556/fledge2000/AXTS/009BAB39-6894-4EFD-B46C-4516274C87A9_zpskrsuflsx.jpg (http://s1291.photobucket.com/user/fledge2000/media/AXTS/009BAB39-6894-4EFD-B46C-4516274C87A9_zpskrsuflsx.jpg.html)

[Cotton68spc]

Picked it up today.

http://i1291.photobucket.com/albums/b556/fledge2000/AXTS/009BAB39-6894-4EFD-B46C-4516274C87A9_zpskrsuflsx.jpg (http://s1291.photobucket.com/user/fledge2000/media/AXTS/009BAB39-6894-4EFD-B46C-4516274C87A9_zpskrsuflsx.jpg.html)

Jealous .... congrats


Sent from my iPhone using Tapatalk

[Pyzik]

Picked it up today.

http://i1291.photobucket.com/albums/b556/fledge2000/AXTS/009BAB39-6894-4EFD-B46C-4516274C87A9_zpskrsuflsx.jpg (http://s1291.photobucket.com/user/fledge2000/media/AXTS/009BAB39-6894-4EFD-B46C-4516274C87A9_zpskrsuflsx.jpg.html)
Nice!

Sent from my SM-G930V using Tapatalk

[fledge]

Thanks, Gents. I have the harvester mount too which will shorten it a little more. Hoping for some range time this week.

[gatordev]

A buddy of mine has one STILL in jail, but we took it out yesterday and played with it at the range. I ran it on my G17 as well as his. Definitely a little lighter/less nose heavy than my Octane 45K, since it's smaller. He had a pretty epic POI shift on his Glock. Mine is running a Silencerco barrel and I had no noticeable POI shift on a 4" popper at 10y. I'm not sure what barrel he's running.

Still, sounded very nice and looks like a solid can. I'm a little jealous, but it came out shortly after I bought my 45K.

[fledge]

Thanks for the report. I don't have a threaded pistol yet to test. I got this for my HD 300blk rifle and for hunting (and a 9mm carbine if I ever get to it). I'll note POI when I get to the range.

[UWone77]

Been working on a new 300 BO LH Upper


2293

[SINNER]

Wow, thanks man. I didn't know we were exchanging gifts this year. LOL Looks killer so far.

[Jerry R]

Stamp finally cleared for the Sig 716 CQB ...
https://c5.staticflickr.com/1/228/31519165076_db8d5ecb04_o.jpg (https://flic.kr/p/Q2eXEC)IMG_2262 Sig 716 CQB (https://flic.kr/p/Q2eXEC) by Jerry R (https://www.flickr.com/photos/9663868@N05/), on Flickr

https://c7.staticflickr.com/1/89/31185020310_09a7f9d6dd_o.jpg (https://flic.kr/p/PvHo4Y)IMG_2273 Sig 716 CQB (https://flic.kr/p/PvHo4Y) by Jerry R (https://www.flickr.com/photos/9663868@N05/), on Flickr

https://c3.staticflickr.com/1/781/31186628170_f1b4aa4300_o.jpg (https://flic.kr/p/PvRC2G)Sig 716 CQB Stack-2 Size 1536 (https://flic.kr/p/PvRC2G) by Jerry R (https://www.flickr.com/photos/9663868@N05/), on Flickr

[Deadwing]

Stamp finally cleared for the Sig 716 CQB ...
https://c5.staticflickr.com/1/228/31519165076_db8d5ecb04_o.jpg


That is one wicked blaster, Jerry!

[Jerry R]

Thank you Sir.

[Former11B]

Where'd you find the S&B 7.62x51 subs? I don't know much about them and semi auto actions. Is it similar to 5.56 in that they won't cycle the action?

[Jerry R]

Where'd you find the S&B 7.62x51 subs? I don't know much about them and semi auto actions. Is it similar to 5.56 in that they won't cycle the action?

Have not tried them yet. Had them for awhile, will need to check the invoice. Bought a ten pack online. Since both Sig's are adjustable piston, figured I could find a setting with the suppressor that would cycle. Probably comparable to 300 BO without having to get a new reloading setup. Good brass if they work or not. Going to son's (GriffonSec) for Christmas, will try a box then during sight-in. Thorough testing during the planned spring shoot, with chrono data and POI delta from the 168 match loads used for actual zero. Will post info from the Christmas shoot.

[UWone77]

2330

[Deadwing]

After nearly eight months of waiting, my Sig MPX has finally been sprung from NFA jail. I swapped the Sig pistol grip for a Magpul MOE-K2, and changed the collapsable buttstock out for a side folder.

http://i95.photobucket.com/albums/l145/Deadwing76/BE62972A-7919-4E95-9D3D-AAD1A5254107_zpsc9t6o9xq.jpg (http://s95.photobucket.com/user/Deadwing76/media/BE62972A-7919-4E95-9D3D-AAD1A5254107_zpsc9t6o9xq.jpg.html)

http://i95.photobucket.com/albums/l145/Deadwing76/ADC6515C-DCAF-48C1-AE78-0A648D2DD440_zpsfvwdae6n.jpg (http://s95.photobucket.com/user/Deadwing76/media/ADC6515C-DCAF-48C1-AE78-0A648D2DD440_zpsfvwdae6n.jpg.html)

http://i95.photobucket.com/albums/l145/Deadwing76/3F4295DB-F7AF-4C51-A78D-1D56BEA7A05C_zpsx83zfnmz.jpg (http://s95.photobucket.com/user/Deadwing76/media/3F4295DB-F7AF-4C51-A78D-1D56BEA7A05C_zpsx83zfnmz.jpg.html)

[GOST]

Nice MPX, how do you like it?

[Deadwing]

Nice MPX, how do you like it?

Thanks. I'm liking it a lot, but am slightly underwhelmed. Spending time tearing it down and getting familiar with it, you can see where Sig cut corners. Not exactly what one wants to see on a gun in this price range. But that said, I'm really excited to get out and shoot it. The trigger really sucks bad, and is by far the worst AR type trigger I've ever felt. I spent some time with a Dremel and polishing compound doctoring the engagement surfaces and got it feeling a lot better. But Geissele can't release their trigger for the MPX soon enough.

[fledge]

Axlnut coated the upper.

I can only get this to cycle 50% of the time with the BAD buffer system. 300blk Supersonic 110gr Ozark ammo. This isn't the upper's regular home but a sweet looking PDW.

http://i1291.photobucket.com/albums/b556/fledge2000/Battle%20Arms%20Build/3CE2FAA7-E0C4-4572-8260-5598ABBF1759_zpsgshgkwul.jpg (http://s1291.photobucket.com/user/fledge2000/media/Battle%20Arms%20Build/3CE2FAA7-E0C4-4572-8260-5598ABBF1759_zpsgshgkwul.jpg.html)

[fledge]

http://i1291.photobucket.com/albums/b556/fledge2000/V%20Seven/913D8CA7-3761-43C8-BC2C-C24E3733AEF8_zps3nafgpp9.jpg (http://s1291.photobucket.com/user/fledge2000/media/V%20Seven/913D8CA7-3761-43C8-BC2C-C24E3733AEF8_zps3nafgpp9.jpg.html)

[UWone77]

So how's the Dead Air Pyro? Worth the $250?

[fledge]

I got it for $180, partly to test rail clearances and play with the locking system while waiting for the sandman.

There's a significant difference between it and the flash hider in muzzle rise. I don't notice the concussion to the shooter like I do from typical brakes. I've not had someone standing nearby to ask how it sounds to the side.

[Dstrbdmedic167]

2387

[Stickman]

2387

Nice gun. Can't say the same for the optic mount.

[Dstrbdmedic167]

Nice gun. Can't say the same for the optic mount.

Thanks but the Setup isn't mine.


Sent from my iPhone using Tapatalk

[UWone77]

Thanks but the Setup isn't mine.


Sent from my iPhone using Tapatalk

Obviously.... there's no PEPR Mount!

[Dstrbdmedic167]

Obviously.... there's no PEPR Mount!

Didn't see that coming.... :lame:


Sent from my iPhone using Tapatalk

[fledge]

http://i1291.photobucket.com/albums/b556/fledge2000/Battle%20Arms%20Build/E131CD59-E04B-46C4-A59B-E1B1A63242B2_zpsgggwyt0e.jpg (http://s1291.photobucket.com/user/fledge2000/media/Battle%20Arms%20Build/E131CD59-E04B-46C4-A59B-E1B1A63242B2_zpsgggwyt0e.jpg.html)

[Aragorn]

Axlnut coated the upper.

I can only get this to cycle 50% of the time with the BAD buffer system. 300blk Supersonic 110gr Ozark ammo. This isn't the upper's regular home but a sweet looking PDW.

http://i1291.photobucket.com/albums/b556/fledge2000/Battle%20Arms%20Build/3CE2FAA7-E0C4-4572-8260-5598ABBF1759_zpsgshgkwul.jpg (http://s1291.photobucket.com/user/fledge2000/media/Battle%20Arms%20Build/3CE2FAA7-E0C4-4572-8260-5598ABBF1759_zpsgshgkwul.jpg.html)

Fledge what barrel is this? And what length?

[fledge]

VSeven 6.5" 300blackout.

I had a machinist chop the Dead Air brake to shorten as much as possible. I have a sandman in jail for this pocket rocket.

[PrimerProjects]

Obviously.... there's no PEPR Mount!

Seriously asking, does the PEPR mount suck? I'm new to these fancy scope things...

[Aragorn]

VSeven 6.5" 300blackout.

I had a machinist chop the Dead Air brake to shorten as much as possible. I have a sandman in jail for this pocket rocket.

Awesome, how do you like it? I've recently been debating using V7's 8.25" Blackout barrel on an upcoming project, one that admittedly, you kinda inspired me on.

[UWone77]

Seriously asking, does the PEPR mount suck? I'm new to these fancy scope things...

The PEPR Mount is serviceable, it's more of an inside joke.

There are much better (lighter, more secure mounting, less clunky) options than the PEPR though.

[fledge]

Awesome, how do you like it? I've recently been debating using V7's 8.25" Blackout barrel on an upcoming project, one that admittedly, you kinda inspired me on.

I just got this 6.5" built and tested with the PDW in the pics above. Not reliable with that stock. Weather was bad so I stopped testing. Depending on weather tomorrow, I'll give it a proper go.

I have the 8.25 too. I like it. The Omega 9k sits in it. Light, nimble all around. I have it in the Falkor rail with the can tucked. I've only tested, sighted for 25 yards because that's its HD mission.

http://i1291.photobucket.com/albums/b556/fledge2000/SMOS/E6667986-4086-4087-92AF-B3D1F7626D9E_zpspbtdw3pi.jpg (http://s1291.photobucket.com/user/fledge2000/media/SMOS/E6667986-4086-4087-92AF-B3D1F7626D9E_zpspbtdw3pi.jpg.html)

[Axlnut]

I just got this 6.5" built and tested with the PDW in the pics above. Not reliable with that stock. Weather was bad so I stopped testing. Depending on weather tomorrow, I'll give it a proper go.

I have the 8.25 too. I like it. The Omega 9k sits in it. Light, nimble all around. I have it in the Falkor rail with the can tucked. I've only tested, sighted for 25 yards because that's its HD mission.

http://i1291.photobucket.com/albums/b556/fledge2000/SMOS/E6667986-4086-4087-92AF-B3D1F7626D9E_zpspbtdw3pi.jpg (http://s1291.photobucket.com/user/fledge2000/media/SMOS/E6667986-4086-4087-92AF-B3D1F7626D9E_zpspbtdw3pi.jpg.html)

Pure sex.

[fledge]

Thanks, Axlnut.

Aragorn, quick follow up. I got the 6.5" out today. Carbine H2 buffer. Locks back with 110gr and 147gr but not 220gr (all Ozark). The 220 will lock back once suppressed. Soft shooter for being so short.

[Aragorn]

Thanks, Axlnut.

Aragorn, quick follow up. I got the 6.5" out today. Carbine H2 buffer. Locks back with 110gr and 147gr but not 220gr (all Ozark). The 220 will lock back once suppressed. Soft shooter for being so short.

Good to know. How's the 8.25 run in comparison? More reliable or anything of note? I'm feeling a little sketchy on going shorter than that, even with 300Blackout, just due to velocity reasons. I won't be running suppressed.

[UWone77]

DD RIS II Action

2412

[UWone77]

2433

[SINNER]

2433

The simplest always works. Both in form and function. Love it

[fledge]

http://i1291.photobucket.com/albums/b556/fledge2000/Noveske/A50DA89C-38D5-4A05-853B-26BCAED1EE45_zpsvljqhz1g.jpg (http://s1291.photobucket.com/user/fledge2000/media/Noveske/A50DA89C-38D5-4A05-853B-26BCAED1EE45_zpsvljqhz1g.jpg.html)

[GOST]

2445

[fledge]

That combo looks good, GOST. What color is the paint?

[GOST]

1 part sniper grey, 1 part tactical grey, and 2 parts burnt bronze. Under natural light it is more brown. Here's pic made of the swatches of the mixes.

2446

[Das Jared]

http://uploads.tapatalk-cdn.com/20170101/97e968726dee79fe78451b538d286cf0.jpghttp://uploads.tapatalk-cdn.com/20170101/04fdd97013a5e298206c040302ac6643.jpg

Sent from my SM-G900P using Tapatalk

[Stickman]

2492

[Former11B]

2433

I really love the way the Mini-4 looks. If I was in the market for a new 5.56 can, I'd seriously consider one. Do you run a flash hider or brake under it with that barrel length?


http://i1291.photobucket.com/albums/b556/fledge2000/Noveske/A50DA89C-38D5-4A05-853B-26BCAED1EE45_zpsvljqhz1g.jpg (http://s1291.photobucket.com/user/fledge2000/media/Noveske/A50DA89C-38D5-4A05-853B-26BCAED1EE45_zpsvljqhz1g.jpg.html)


Thats what I call a snow angel!

[Farva]

http://uploads.tapatalk-cdn.com/20170109/e2a38725bffab384231d3ea38b6c250f.jpg
http://uploads.tapatalk-cdn.com/20170109/021b2f30c790f0e70e2352743e427081.jpg
http://uploads.tapatalk-cdn.com/20170109/8ae9cf2bd0f83f264c70f25f478f2601.jpghttp://uploads.tapatalk-cdn.com/20170109/bc4b1bec8ee0eb5db46240a2ff58f6c1.jpg


Sent from my iPhone using Tapatalk

[Aragorn]

^^^Pretty sweet pics Farva!

[GOST]

Like Aragorn said, very nice Farva.

[Farva]

Thanks everyone!


Sent from my iPhone using Tapatalk

[Joelski]

Very cool pics! I love keymod on other people's rifles. Might need to try one someday. Reminds me of where I lived in OK, of course, past Tulsa, most of it looks like that. LOL!

[Das Jared]

http://uploads.tapatalk-cdn.com/20170109/9cadc746af9f3ad4572bd1caf10f8405.jpg

Sent from my SM-G900P using Tapatalk

[Farva]

Very cool pics! I love keymod on other people's rifles. Might need to try one someday. Reminds me of where I lived in OK, of course, past Tulsa, most of it looks like that. LOL!

Yep! This is in central/ north central OK


Sent from my iPhone using Tapatalk

[Aragorn]

^^^Where do you do your shooting? I find myself at the Oklahoma City gun club several times a year, and hopefully more once I move back to OK later this year.

[Farva]

^^^Where do you do your shooting? I find myself at the Oklahoma City gun club several times a year, and hopefully more once I move back to OK later this year.

We have a sizable range built on one of our farms


Sent from my iPhone using Tapatalk

[Das Jared]

http://uploads.tapatalk-cdn.com/20170110/c071ed5a092bacdcce31edaba87a9d35.jpghttp://uploads.tapatalk-cdn.com/20170110/8b8db851bfb9cdc3d5f2e9afdea1c621.jpg

Sent from my SM-G900P using Tapatalk

[GOST]

Love the Vans.

[Das Jared]

Love the Vans.
Thanks! My wife, then fiancée at the time, somehow managed to snag them for me when they came out. I didn't realize just how unobtainable they are, I get offers on them quite often.

Sent from my SM-G900P using Tapatalk

[UWone77]

Thanks everyone!


Sent from my iPhone using Tapatalk

Forgot about your blue line build. Looking even better with the Kinetic Mount!

[Farva]

Forgot about your blue line build. Looking even better with the Kinetic Mount!

Yeah it's really coming together. Can't decide if I want to paint the upper to match or not. I love that mount too!


Sent from my iPhone using Tapatalk

[Das Jared]

https://uploads.tapatalk-cdn.com/20170111/b1caa0624a2e2d33c7b3d55aa57216b0.jpg

Sent from my SM-G900P using Tapatalk