NFA Picture Thread

[Joelski]

I haven't had that experience, although I haven't shot mine suppressed extensively, it's just worked. Carb H buffer, carb spring, super gas block. I've run from 147 to 220 gr. and not had anything get weird.

All told, I'm about 3,600 rounds in and had a couple light strikes d/t sunken primers, and one crushed throat that never repeated. Between Magpul and DSG mil spec mags, the bolt (fathom) locks back every time.

[Joelski]

Tapatalk sucks!

[voodoo_man]

http://i.imgur.com/U26xQhc.jpgp (http://www.vdmsr.com/2017/08/suppress-cover.html)

[UWone77]

9mm SBR options

4088

[voodoo_man]

http://i.imgur.com/MEvnSQ7.jpg (http://www.vdmsr.com/2017/08/hokey-religions-and-blasters.html)

[UWone77]

4124

[MoxyDave]

That's flippin' awesome. What suppressor is that? Is it hearing safe in that length?

I've always wanted to build a proper suppressed pistol setup, but they all seem so ungainly with those super huge 9mm suppressors ...

[UWone77]

That's flippin' awesome. What suppressor is that? Is it hearing safe in that length?

I've always wanted to build a proper suppressed pistol setup, but they all seem so ungainly with those super huge 9mm suppressors ...

AAC TiRant 9s. I'd say it's borderline hearing safe.... maybe when wet.

[MoxyDave]

Thanks. Maybe next year ...

[UWone77]

Thanks. Maybe next year ...

Dave,

If I were you, I'd get the Dead Air Wolf, which will be my next can. 9mm modular. 4.1" on the smallest configuration.

https://deadairsilencers.com/products/wolf-9sd/

[titanse05]

Dave,

If I were you, I'd get the Dead Air Wolf, which will be my next can. 9mm modular. 4.1" on the smallest configuration.

https://deadairsilencers.com/products/wolf-9sd/I'm curious to what you would recommend for a can to ride under a CZ Scorpion with the carbine handguard.

[UWone77]

I'm curious to what you would recommend for a can to ride under a CZ Scorpion with the carbine handguard.

I would use any of the shorter cans and 3 Lug it.

[titanse05]

I would use any of the shorter cans and 3 Lug it.I was initially leaning towards an Omega 9k but I have heard some mixed reviews on how much suppression you actually get.

[MoxyDave]

Dave,

If I were you, I'd get the Dead Air Wolf, which will be my next can. 9mm modular. 4.1" on the smallest configuration.

https://deadairsilencers.com/products/wolf-9sd/

Appreciate the tip; will check it out.

[voodoo_man]

http://i.imgur.com/Y2aU55O.jpg (http://www.vdmsr.com/2017/08/coffee-and-cans.html)

[Former11B]

When you and your buddy show up to the same house

4138

[Former11B]

4152

[Dstrbdmedic167]

4155

[Former11B]

I like that a lot ^^^^

[Dstrbdmedic167]

I like that a lot ^^^^

Thanks man!


Sent from my iPhone using Tapatalk

[ChattanoogaPhil]

https://i.imgur.com/3llrcvl.jpg

[cjd3]

https://i.imgur.com/3llrcvl.jpg
I like your style. Similar setup, super fun to run

[UWone77]

That's some old school sparrow!

[ChattanoogaPhil]

That's some old school sparrow!

It was made for James Bondd 0077....

[UWone77]

4168

[BoilerUp]

I got to meet my Griffin Revolution 9 for the first time last week:

https://photos.smugmug.com/photos/i-V7tfbqG/0/924dca99/X2/i-V7tfbqG-X2.jpg

Ordered from Silencershop delivered to a local kiosk shop (Pantel Tactical). I'm really hoping those wait times drop through the floor!

[cjd3]

4168
That's a close fit!

[Joelski]

I got to meet my Griffin Revolution 9 for the first time last week:

https://photos.smugmug.com/photos/i-V7tfbqG/0/924dca99/X2/i-V7tfbqG-X2.jpg

Ordered from Silencershop delivered to a local kiosk shop (Pantel Tactical). I'm really hoping those wait times drop through the floor!
It comes with an oven mitt? Sweet!

[BoilerUp]

It comes with an oven mitt? Sweet!

That's a "tactical suppressor removal tool" (Silencershop swag).

[UWone77]

That's a close fit!

Everyone likes a close fit!

4174

[UWone77]

4182

[alamo5000]

https://c1.staticflickr.com/5/4361/36941840362_6b4f4a6e09_b.jpg

[alamo5000]

https://c1.staticflickr.com/5/4365/36276771994_fd82e7cd0f_b.jpg

[Pyzik]

https://c1.staticflickr.com/5/4361/36941840362_6b4f4a6e09_b.jpgNice

Sent from my SM-G930V using Tapatalk

[Slippers]

https://c1.staticflickr.com/5/4361/36941840362_6b4f4a6e09_b.jpg

That is a sweet little blaster, for certain!

[alamo5000]

Nice

Sent from my SM-G930V using Tapatalk

Got to playing with my new camera!

[alamo5000]

That is a sweet little blaster, for certain!

I love shooting that thing! It's so much fun!

[UWone77]

4191

[Dstrbdmedic167]

4191

So jelly!


Sent from my iPhone using Tapatalk

[Former11B]

4209

[UWone77]

4209

Nice collection

[UWone77]

Glock 21

4239

[Das Jared]

My Noveske being put to work on Ranch duty out in West TXhttps://uploads.tapatalk-cdn.com/20170917/4b6b1f0be723d1fdbea5645c56b4e67a.jpg

Sent from my SM-G900P using Tapatalk

[Joelski]

Had a guy die just like that. Gun was riding shotty, fell over and that's how we found him. Be safe!

[Former11B]

Had a guy die just like that. Gun was riding shotty, fell over and that's how we found him. Be safe!

Sounds like a lot went wrong there

[Former11B]

Double tap

[Das Jared]

Had a guy die just like that. Gun was riding shotty, fell over and that's how we found him. Be safe!That is definitely one in a million.. It rides usually either in the bed, muzzle facing away from the cab, or in my hands. This was a photo-op.

Sent from my SM-G900P using Tapatalk

[GOST]

Nice pic Das Jared, everyone loves a dirty girl.

[Dstrbdmedic167]

Nice pic Das Jared, everyone loves a dirty girl.

Not everyone.. I never cared much for it. I like the work on your end and the engravers but that's not my cup of tea.

[GOST]

James I'm talking about his rifle, what are you talking about? You want him to bathe his rifle before taking a pic?

[Dstrbdmedic167]

James I'm talking about his rifle, what are you talking about? You want him to bathe his rifle before taking a pic?

Dirty girl as in the Wevo logo with the girl... but the bath wouldn't hurt [BD] j/k


edit: the pics showed up all wrong when they loaded for me while ago apparently. It showed the pic with the lower mentioned above but now show the correct photo. Weird.. :shrugs: carry on....

[cjd3]

4191

Looks great, interested in your view of the mount (and can!)

[gatordev]

https://farm5.staticflickr.com/4439/37144118061_17fe87d888_b.jpg

[Joelski]

That is definitely one in a million.. It rides usually either in the bed, muzzle facing away from the cab, or in my hands. This was a photo-op.

Sent from my SM-G900P using Tapatalk
No disrespect meant. I'm sure you obey the 4 laws like we all do. Worth a mention if it prevents one person from thinking it'll never happen.

And the dirt... Gost is right. Gotta love a gun that needs a hose bath every now and then!

[Slippers]

Looks great, interested in your view of the mount (and can!)

The dead air mount is wonderful. I don't have my sandman yet, but I do have their mount on my saker, which sees lots of full-auto use and is swapped between multiple rifles and calibers. Never gets stuck, always locks up tight, and gives me consistent point of impact shift on each gun.

[Das Jared]

No disrespect meant. I'm sure you obey the 4 laws like we all do. Worth a mention if it prevents one person from thinking it'll never happen.

And the dirt... Gost is right. Gotta love a gun that needs a hose bath every now and then!That is good to know. Just a reminder to always pay attention to the holy rules of gun safety

Sent from my SM-G900P using Tapatalk

[Pyzik]

https://farm5.staticflickr.com/4439/37144118061_17fe87d888_b.jpg

Wow, very nice!

[Joelski]

4209
I gave it time and nobody jumped at it, so...

NICE CANS! [:D]

[gatordev]

Wow, very nice!

Thank you, sir. I just need to remember to go pick up some Butler Creeks.

[fledge]

Thank you, sir. I just need to remember to go pick up some Butler Creeks.

I picked up some vortex covers per Slippers recommendation. Much better than butler creek.

[gatordev]

I picked up some vortex covers per Slippers recommendation. Much better than butler creek.

It's not hard to be better than Butler Creek, but they're easy to procure and not at the Tennebreux level of pricing. That said, based on my crude measuring, I don't believe the ocular Vortex cap will fit that scope (cap ID is too big).

[Dstrbdmedic167]

As Ice Cube once said.. Today was a good day!

4288

4289

4290

[Slippers]

As Ice Cube once said.. Today was a good day!

4288

4289

4290

Oh yes, it was a good day. First time out with the new Kahles K16i, too. Is it worth the price? I don't know. But it's really darn good.

[Dstrbdmedic167]

Oh yes, it was a good day. First time out with the new Kahles K16i, too. Is it worth the price? I don't know. But it's really darn good.

It is very nice! I love the reticle too. That is probably one of my favorite reticles to date.


Sent from my iPhone using Tapatalk

[Slippers]

Short video from yesterday:


https://youtu.be/E_9ngTuZ7Sc

[gatordev]

https://farm5.staticflickr.com/4438/36743101393_44b36cc715_b.jpg

[Former11B]

http://i.imgur.com/EPJhRsg.jpg

http://i.imgur.com/oibIeg3.jpg




https://farm5.staticflickr.com/4438/36743101393_44b36cc715_b.jpg

I dig this setup! I have bike inner tube strips in my stocks for the same purpose

[UWone77]

https://farm5.staticflickr.com/4438/36743101393_44b36cc715_b.jpg

I really dig Mk18 Mod 0'ish builds.

[Joelski]

Drool worthy, indeed.

[gatordev]

I really dig Mk18 Mod 0'ish builds.

Definitely "-ish." But I've found the internet forgives such things if it's coated in a worn Krylon finish.

That said, pretty interesting to see how much (apparently) torque the light puts on the rail when using it as a push-point on a barricade today. The 416 today had none of the issues the ancient RAS rail did when trying to shoot through VTAC angles. A great learning experience.

[Pyzik]

https://farm5.staticflickr.com/4438/36743101393_44b36cc715_b.jpgWow, very nice

Sent from my SM-G930V using Tapatalk

[UWone77]

Definitely "-ish." But I've found the internet forgives such things if it's coated in a worn Krylon finish.

That said, pretty interesting to see how much (apparently) torque the light puts on the rail when using it as a push-point on a barricade today. The 416 today had none of the issues the ancient RAS rail did when trying to shoot through VTAC angles. A great learning experience.

I just really like shooting 10.3/10.5's with FSB's. Plus I think they look good with cans. Shot a duty carbine for years with a FSB, so I miss them when I'm shooting and don't see it through my aimpoint. Just a bombproof setup.

[Former11B]

I just really like shooting 10.3/10.5's with FSB's. Plus I think they look good with cans. Shot a duty carbine for years with a FSB, so I miss them when I'm shooting and don't see it through my aimpoint. Just a bombproof setup.


You can't tell, but there's a suppressor on the end of a 10.5" barrel on this rig [BD]


4321

[WarEagle]

200 days exactly to get my form 1 back. Hopefully my form 4 is just as quick.

https://farm5.staticflickr.com/4506/37436261311_7b209c54cf_b.jpg

[BoilerUp]

200 days exactly to get my form 1 back. Hopefully my form 4 is just as quick.

https://farm5.staticflickr.com/4506/37436261311_7b209c54cf_b.jpg

Individual or Trust?

I like your taste in weapons more than I like your taste in footwear, but they say there is no accounting for taste...

[WarEagle]

Individual or Trust?

I like your taste in weapons more than I like your taste in footwear, but they say there is no accounting for taste...

Individual

Yea the Supreme Jordan 5s aren’t for everyone.


Sent from my iPhone using Tapatalk

[UWone77]

Individual Forms are flying... well in relative terms. May submissions coming back already... meanwhile, ATF still working on Aug '16 Trust submissions.

[Dstrbdmedic167]

It's gonna be next month before I get my form 1 in for my PDW but I cannot wait! I hope to have it back before my birthday in April. I'm doing in individual this time

[alamo5000]

Individual Forms are flying... well in relative terms. May submissions coming back already... meanwhile, ATF still working on Aug '16 Trust submissions.

When was the 41F cutoff? Do you think that is at least in part because of the 41F rush? I would hope that after they get through that big ass back log of stuff that it would be somewhat better.

[Dstrbdmedic167]

When was the 41F cutoff? Do you think that is at least in part because of the 41F rush? I would hope that after they get through that big ass back log of stuff that it would be somewhat better.

July was the cutoff so we’re just barely past that. There are still more trust then iindividuals overall...


Sent from my iPhone using Tapatalk

[alamo5000]

July was the cutoff so we’re just barely past that. There are still more trust then iindividuals overall...


Sent from my iPhone using Tapatalk

I have two cans in jail now. I bought them from a hotel room in China via the interweb. LOL!

I did it via the same way as before (the trust) because I am too lazy to do it any other way. The waiting is a real pain in the ass though.

I want to get a few more cans though and I will be set. .22 can and a .45 can and I will have all calibers covered.

[Dstrbdmedic167]

I have two cans in jail now. I bought them from a hotel room in China via the interweb. LOL!

I did it via the same way as before (the trust) because I am too lazy to do it any other way. The waiting is a real pain in the ass though.

I want to get a few more cans though and I will be set. .22 can and a .45 can and I will have all calibers covered.

Hard to say exactly how quick we will see the bottleneck get better by it should. I’m seriously thinking about a couple more cans next month as well. I blame slippers and UW... lol

[alamo5000]

Hard to say exactly how quick we will see the bottleneck get better by it should. I’m seriously thinking about a couple more cans next month as well. I blame slippers and UW... lol

I will just go ahead and get those two as soon as my money allows it. Griffin is supposed to be offering a new .22 can but they are being slow AF with it... I am in no hurry (for now) although a .45 can is actually looking pretty attractive. When my $$$ gets straightened out I will buy more cans since it takes so damn long. On the other hand I have a love hate relationship with pistol cans. I love em but they make the gun too long and awkward to handle.

My deal now is I need to get a crap load of suppressor hosts! LOL! 6.5 Creedmore is definitely coming but that ain't cheap for what I want, especially with the optics. I still have a .22LR built that has just been sitting forever. I also have a thing for CZ pistols. I like Sig too... but it's time to diversify.

[Dstrbdmedic167]

I will just go ahead and get those two as soon as my money allows it. Griffin is supposed to be offering a new .22 can but they are being slow AF with it... I am in no hurry (for now) although a .45 can is actually looking pretty attractive. When my $$$ gets straightened out I will buy more cans since it takes so damn long. On the other hand I have a love hate relationship with pistol cans. I love em but they make the gun too long and awkward to handle.

My deal now is I need to get a crap load of suppressor hosts! LOL! 6.5 Creedmore is definitely coming but that ain't cheap for what I want, especially with the optics. I still have a .22LR built that has just been sitting forever. I also have a thing for CZ pistols. I like Sig too... but it's time to diversify.

You haven't used the right can/host.. lol.. Yes, they add length but that's just the way it is unless you get the maxim 9. I've never had any issues using my glock 19 and osprey 45. Which reminds me I need to call silencerco on my warlock II. Having serious issues with it and my M&P22c. Can off it's dead accurate by both me and another person who can shoot circles around me. Can on its like a 1700's musket lol.. It is literally everywhere...

[Joelski]

My Feb. submission needs to hurry TF up!

[iflyskyhigh]

I submitted 2 Form 1 Trusts SBR’s last July right before the rule change and I just got them back beginning of June. It was almost 11 months to the day. I moved in July and August. Haven’t even had a chance to purchase the parts or assemble them yet. I didn’t want to purchase a bunch of parts in case they rejected for some odd reason.


Sent from my iPhone using Tapatalk

[Former11B]

I want another Recce 5. Or maybe a Spartan 3. And a Recce 7. And an M4SDII just for the A2 lock up


4331

[mustangfreek]

Nice rifle, not in the game yet but have done all my homework and the Reece 5 looks like a really good can for the $$

[Former11B]

Nice rifle, not in the game yet but have done all my homework and the Reece 5 looks like a really good can for the $$


If you don’t need a “precision” can, I’d also look at the Griffin M4SD-K. Same weight, same construction, no wear out parts in the latch/gate, and ALMOST as quiet


My peestoles
4366

[gatordev]

Rediscovering the joys of Sig...

https://farm5.staticflickr.com/4455/36931130163_a31867becb_b.jpg

[UWone77]

Dat MK18 Doe.... Always love the rattle can job.

[Stickman]

https://farm5.staticflickr.com/4451/36954223773_94ab5521ed_b.jpg (https://flic.kr/p/Yiw4gc)Stickman (https://flic.kr/p/Yiw4gc) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr

[Former11B]

I will just go ahead and get those two as soon as my money allows it. Griffin is supposed to be offering a new .22 can but they are being slow AF with it... I am in no hurry (for now) although a .45 can is actually looking pretty attractive. When my $$$ gets straightened out I will buy more cans since it takes so damn long. On the other hand I have a love hate relationship with pistol cans. I love em but they make the gun too long and awkward to handle.

My deal now is I need to get a crap load of suppressor hosts! LOL! 6.5 Creedmore is definitely coming but that ain't cheap for what I want, especially with the optics. I still have a .22LR built that has just been sitting forever. I also have a thing for CZ pistols. I like Sig too... but it's time to diversify.

If I bought a .22 can right now it would probably be an AAC Halcyon


Griffin’s IG post about their new .22 can:
https://www.instagram.com/p/BaHn2SVB6J6/

[UWone77]

4395

[UWone77]

4403

[Dstrbdmedic167]

https://uploads.tapatalk-cdn.com/20171019/00db09e680fdd705d7d720d9fd760e36.jpg

Sent from my SM-N950U using Tapatalk

[Slippers]

BCM MCMR finally.

https://i.imgur.com/YpVrUAA.jpg

[fledge]

BCM MCMR finally.

https://i.imgur.com/YpVrUAA.jpg

So clean. Is that 11.5 upper?

[Slippers]

So clean. Is that 11.5 upper?

Yes, it's my old 11.5. I swapped the handguard.

[Slippers]

Another great range day with a bunch of good shooting buddies including Dstrbd (who was nice enough to put down his guns and use a camera some!).

https://i.imgur.com/fwtEbaS.jpg

[Pyzik]

Another great range day with a bunch of good shooting buddies including Dstrbd (who was nice enough to put down his guns and use a camera some!).

https://i.imgur.com/fwtEbaS.jpgNow that looks fun!

Sent from my SM-G930V using Tapatalk

[Stickman]

https://farm5.staticflickr.com/4451/36954223773_94ab5521ed_b.jpg (https://flic.kr/p/Yiw4gc)Stickman (https://flic.kr/p/Yiw4gc) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr

[mustangfreek]

Good looking rifle

[UWone77]

4484

[gatordev]

I have a sneaky suspicion you stole my FDE Mini from AU after they had an "inventory issue." Whatevs...



https://farm5.staticflickr.com/4502/38090973236_2f9d03ca2d_b.jpg

[UWone77]

I have a sneaky suspicion you stole my FDE Mini from AU after they had an "inventory issue." Whatevs...



https://farm5.staticflickr.com/4502/38090973236_2f9d03ca2d_b.jpg

Rainier got 2 FDE Mini's in. Grabbed one since I had not seen one in stock in forever.

At $899, surprised they still have one in stock

https://www.rainierarms.com/surefire-socom-556-mini-sound-suppressor-fde/

[Former11B]

Rainier got 2 FDE Mini's in. Grabbed one since I had not seen one in stock in forever.

At $899, surprised they still have one in stock

https://www.rainierarms.com/surefire-socom-556-mini-sound-suppressor-fde/

No kidding. It’s a great looking can. Never shot one, though

[gatordev]

Rainier got 2 FDE Mini's in. Grabbed one since I had not seen one in stock in forever.

At $899, surprised they still have one in stock

https://www.rainierarms.com/surefire-socom-556-mini-sound-suppressor-fde/


I ended up just going with a black one from AU. At $800, I figured I could live with a little spray paint after the fact.

[voodoo_man]

https://i.imgur.com/uFRGZCb.jpg (http://www.vdmsr.com/2017/11/cole-tac-cover.html)

[Former11B]

4496

[voodoo_man]

https://i.imgur.com/DzDSP3Z.jpg (http://www.vdmsr.com/2017/11/gemtech.html)

[WarEagle]

Picked up my suppressor today...

https://farm5.staticflickr.com/4565/37630890024_f2c7c1d880_b.jpg

[UWone77]

Picked up my suppressor today...

https://farm5.staticflickr.com/4565/37630890024_f2c7c1d880_b.jpg

Good looking weapon.

[WarEagle]

Good looking weapon.
Thanks.

[Joelski]

Good looking weapon.Indeed!

[Farva]

https://uploads.tapatalk-cdn.com/20171112/82be5b53a5143ea468e1e8885f93a51f.jpg


Sent from my iPhone using Tapatalk

[UWone77]

https://uploads.tapatalk-cdn.com/20171112/82be5b53a5143ea468e1e8885f93a51f.jpg


Sent from my iPhone using Tapatalk

How do you like your Mini4?

My favorite can, and Former11B needs one too. [:D]

[Farva]

How do you like your Mini4?

My favorite can, and Former11B needs one too. [:D]

I️ love it!! For the size it can’t be beat. Longer cans are quieter of course but for what it is the mini4 is awesome. I️ can still shoot without ear pro and everything about this rifle was built and bought with a purpose and job in mind. Be as short and functional as possible, while still getting cool guy points of course! The mini4 balances the weapon very well and I️ recommend it highly if someone is out looking for a “quiet” Short can. Former11B should jump on the mini wagon!! I️ have no regrets with my purchase!


Sent from my iPhone using Tapatalk

[Former11B]

I jumped on the MICRO wagon! Single digit serial number Optimus Micro! Rated to 5.56mm on a 12” barrel. 136dB on a 16” 5.56...impressive as hell IMO

If I found a Mini 4 on a crazy sale I’d see what I could do to make it happen thought

[alamo5000]

I jumped on the MICRO wagon! Single digit serial number Optimus Micro! Rated to 5.56mm on a 12” barrel. 136dB on a 16” 5.56...impressive as hell IMO

If I found a Mini 4 on a crazy sale I’d see what I could do to make it happen thought

I don't really care so much about what serial number mine will have on it [:D]

I haven't pulled the trigger on it YET but I hope to be in a position to do so sooner rather than later.

[Former11B]

I don't really care so much about what serial number mine will have on it [:D]

I haven't pulled the trigger on it YET but I hope to be in a position to do so sooner rather than later.

Of all the cans I have, it’s pretty cool to be one of the first people in the country to buy a new one. An hour earlier and I might have gotten the first one

[Joelski]

The serial on my Alpha is kinda low, plus the name is retired. Not a rare collectible by any means, but pretty unique IMO.

[Jerry R]

http://www.weaponevolution.com/forum/attachment.php?attachmentid=4531&d=1510676340

[mustangfreek]

That 1911 is so clean...nice pistol Jerry!

[Jerry R]

That 1911 is so clean...nice pistol Jerry!

Thank you Sir. Not sure what Ed Brown does to stainless to make it look so good; no coating, and if it is bead-blasted it is amazingly smooth. Oh, and it is a shooter too [:D]

[Joelski]

Looks satin bead blasted.

[gatordev]

https://farm5.staticflickr.com/4546/26730885589_192aa35c92_b.jpg

[UWone77]

https://farm5.staticflickr.com/4546/26730885589_192aa35c92_b.jpg

If you could only have 2 rifles, those would be it.

[mustangfreek]

No doubt..about perfect setups..

Nice rifles gator

[Aragorn]

https://farm5.staticflickr.com/4546/26730885589_192aa35c92_b.jpg

What are the details on these? I mean, I see the top one is HK, but otherwise...

Been wracking my brain trying to figure out if I want to suppress my 16", build up an SBR and suppress THAT, or just suppress my .300 pistol (prob least fav option)

[Former11B]

What are the details on these? I mean, I see the top one is HK, but otherwise...

Been wracking my brain trying to figure out if I want to suppress my 16", build up an SBR and suppress THAT, or just suppress my .300 pistol (prob least fav option)

Bottom one is a Colt marked AR with 10.3/10.5” barrel and DD MK18 Rail, KAC flip sights and SF cans

[Slippers]

What are the details on these? I mean, I see the top one is HK, but otherwise...

Been wracking my brain trying to figure out if I want to suppress my 16", build up an SBR and suppress THAT, or just suppress my .300 pistol (prob least fav option)

Suppress them all. Yes, seriously. [BD]

[Former11B]

Suppress them all. Yes, seriously. [BD]



I’ll never go back to going loud

[gatordev]

If you could only have 2 rifles, those would be it.

Honestly, I'd drop the HK for my 12" Mini-Recce. One distance rifle, one red dot w/out the extra weight. But that HK certainly out-shoots the CQBR with it's factory barrel.


No doubt..about perfect setups..

Nice rifles gator

Thanks!


What are the details on these? I mean, I see the top one is HK, but otherwise...


As 11B said, bottom one is a Colt 6920 cut down to 10.3" and Adco's gas port adjustment (I'm guessing somewhere around .070), plus the DD MK18 RIS rail. The rail is getting a bit dated, as it's heavier than it could be nowadays, but the receiver/rail interface is pretty bomb-proof. I just wish I could get the GL/SSC RIS II for my 12.5" carbine, and then I'd be set across all three lengths (10.3, 12.5, and 14.5). But alas....my unicorn.

Waiting on DSG and FedEx to deliver my XT-07 to go with a X300 that will go on the CQBR. For some reason it now takes 11 days to get from TX to FL. I really despise FedEx's Smartpost system more than UPSs, which isn't great either.

[UWone77]

4573

[UWone77]

4599

[gatordev]

Not sure if this is technically NFA, but here's how most of my day was spent today...


https://youtu.be/gntYkO_MbGY

[UWone77]

4618

[UWone77]

4628

[gatordev]

Question: How can you have what appears to be a legacy -212 can but it looks like zero rounds have been shot through it? Suspect.

[FortTom]

Hmmm...I see a special investigation committee by congress, all over this one...

[UWone77]

Question: How can you have what appears to be a legacy -212 can but it looks like zero rounds have been shot through it? Suspect.

Which is kind of funny. I’ve run full auto through it many times :o

Your troll game is weak

[Slippers]

Or maybe UW simply takes good care of his gear.[:)]

[gatordev]

Which is kind of funny. I’ve run full auto through it many times :o

Your troll game is weak

This actually brings up an honest question... Am I just seeing an exposure "issue" that's making it seem lighter (and therefore pristine)? My SOCOMs and my 212 are a nice shade of doo-doo brown and I don't beat them up with select-fire.

[UWone77]

This actually brings up an honest question... Am I just seeing an exposure "issue" that's making it seem lighter (and therefore pristine)? My SOCOMs and my 212 are a nice shade of doo-doo brown and I don't beat them up with select-fire.

First it was "suspect" now it's an honest question... [crazy]

That photo was taken with an iPhone 7, it might have been over exposed. It's definitely not that bright. So far the coating on my SF cans have held up fine and don't look as used as some of the ones I've seen on line. But then again, I don't shoot my SF cans as much as some of my others.

[Former11B]

Or maybe UW simply takes good care of his gear.[:)]

Not referring to UW in this case at all, but I take immaculate care of my gear and my cans, especially my rifle suppressors, all have some scuffs and scrapes on them. I take care of my babies!!! Or so I thought [BD].


4630

[gatordev]

First it was "suspect" now it's an honest question... [crazy]

Whatevs.


That photo was taken with an iPhone 7, it might have been over exposed. It's definitely not that bright. So far the coating on my SF cans have held up fine and don't look as used as some of the ones I've seen on line. But then again, I don't shoot my SF cans as much as some of my others.

I figured it was the picture. With the exception of an AEM 5, all my centerfire rifle shooting is with my SF cans, so they get cycled through the rotation and get exercised. And with my 212 being on a 10.3, it discolors. The finish itself holds up (other than scratches), but it does discolor.

https://farm5.staticflickr.com/4550/26730884949_ae1537c9c9_b.jpg

And if I'm going to troll, might as well go big and troll an Admin!

[Joelski]

... I don't shoot my SF cans as much as some of my others.

I'll PM ya my SOT. [:D]

I know your reason is you just have too much stuff to shoot all the time, but I see guys talking about extending the life of their cans and think, WTF? Is it really that limited of an item? Ti and inconel doesn't just wear down like mild steel. OTOH, if it's truly a consumable item, what are people "saving" their stuff for? You can't take it with ya!

[Former11B]

I'll PM ya my SOT. [:D]

I know your reason is you just have too much stuff to shoot all the time, but I see guys talking about extending the life of their cans and think, WTF? Is it really that limited of an item? Ti and inconel doesn't just wear down like mild steel. OTOH, if it's truly a consumable item, what are people "saving" their stuff for? You can't take it with ya!

17-4ph is very strong and durable....very very low carbon content


I’ll have to find it, but griffin armament posted somewhere stating why they preferred 17-4ph

[gatordev]

I know your reason is you just have too much stuff to shoot all the time, but I see guys talking about extending the life of their cans and think, WTF? Is it really that limited of an item? Ti and inconel doesn't just wear down like mild steel. OTOH, if it's truly a consumable item, what are people "saving" their stuff for? You can't take it with ya!

Because the internet. There's lots of internet pics of cans showing wear (one of mine had a really nice swirl going after a few shots through a 3-prong...wear!). But if you take a step back, like you're saying, and also do some research, the cans still last a long time, even with wear. And if you buy the right can for your use (whatever that is), I'd argue it's even less of an issue. Lots of people like to bash the SF cans. And this isn't meant to get into a can debate, but for their weight, they last an extremely long time. And again, if you do your research and get the "right" can, you can even get them rebuilt for less than a new one.

But really, I'm probably just preaching to the choir, at this point. Or at least certain members of the choir.

[Slippers]

I'll PM ya my SOT. [:D]

I know your reason is you just have too much stuff to shoot all the time, but I see guys talking about extending the life of their cans and think, WTF? Is it really that limited of an item? Ti and inconel doesn't just wear down like mild steel. OTOH, if it's truly a consumable item, what are people "saving" their stuff for? You can't take it with ya!

I think it's just one of those things where it wasn't exactly cheap, it took a long time to get it, and there was hassle involved with all the paperwork. For the cost/effort you want it to last.

If suppressors weren't title 2 items there would be a huge selection of lower cost offerings because there would not be as much of a need to make it out of stellite, inconel or any other expensive materials for longevity. We would consider them disposable wear items, and if it was $150 for a new suppressor, nobody would blink an eye at getting a new one every 10,000 rounds if your local walmart, cabelas, or dicks had them.

[Joelski]

I can see that. But on my side of the coin, I did work hard to pay a lot of money (to me), plus waited what seems like forever to have fondling and polishing be it's biggest source of handling (not that I see that here, but YKWIM). I'm gonna shoot it as much as I can, and if it shows signs of pooping out, I figure it'll last til a new one comes in. That's not to say I'm not going to squirrel away another couple when funds permit. I guess to me, wear is a sign of enjoyment (I don't frivolously abuse expensive things). Ideally, all my stuff will die the same time I do. I sure wouldn't want something just to fondle; that'd be the sure way to get hit by a bus!

Sent from my SM-G860P using Tapatalk

[UWone77]

I'll PM ya my SOT. [:D]

I know your reason is you just have too much stuff to shoot all the time

Pretty much this. I try to rotate as best as I can, but I've got 20+ cans now. Hard to shoot them all and get acceptable amount of wear that passes gators sniff test. [:D]

[Das Jared]

My 11.5" on ranch dutyhttps://uploads.tapatalk-cdn.com/20171205/40b64ed2c87ca57437e96e8a63617e7c.jpg

Sent from my SM-G900P using Tapatalk

[voodoo_man]

https://i.imgur.com/QTnkmee.jpg (http://www.vdmsr.com/2017/12/short-rifle.html)

[gatordev]

Pretty much this. I try to rotate as best as I can, but I've got 20+ cans now. Hard to shoot them all and get acceptable amount of wear that passes gators sniff test. [:D]

Oh sheesh.

[Former11B]

Pretty much this. I try to rotate as best as I can, but I've got 20+ cans now. Hard to shoot them all and get acceptable amount of wear that passes gators sniff test. [:D]

Family photo please

[UWone77]

4718

[Former11B]

4718

You know what that’s missing right

[Das Jared]

SBR killhttps://uploads.tapatalk-cdn.com/20171218/644316943ccb097ae819ad3c62a7a5d6.jpg

Sent from my SM-G900P using Tapatalk

[UWone77]

4725

[Former11B]

4725

It’s still missing something and you know you’re doing it on purpose

[Jerry R]

http://www.weaponevolution.com/forum/attachment.php?attachmentid=4732&d=1513873121

[Former11B]

Jerry, you may have accidentally let a buttplug fall into your suppressor picture

[alamo5000]

Jerry, you may have accidentally let a buttplug fall into your suppressor picture

I'm glad somebody else said it before I did.

Maybe that's for when Jerry tells a burglar that he will 'shove this gun up your ass'... the guy would definitely believe it...

[Uffdaphil]

Jerry, you may have accidentally let a buttplug fall into your suppressor picture

I’m happy to say I have no idea what a buttplug looks like. And a satisfyingly vague concept of their purpose.

[Jerry R]

Jerry, you may have accidentally let a buttplug fall into your suppressor picture

Shhhhhh, didn't think anyone would notice ......

Actually a Thompson Machine Poseidon for the 45. Good nightstand can; not as quiet as the Ti-Rant but half the size and half the weight.

[fledge]

https://i.imgur.com/UtVNtDs.jpg

Joelski, this one’s for you. My spare KAC trigger guard is now on the colt lower. :)

[Joelski]

https://i.imgur.com/UtVNtDs.jpg

Joelski, this one’s for you. My spare KAC trigger guard is now on the colt lower. :)Is that a Trooper? Looks nice man. That guard classes the fcg up nicely!

Sent from my SM-G930P using Tapatalk

[UWone77]

4740

[fledge]

Is that a Trooper? Looks nice man. That guard classes the fcg up nicely!

Sent from my SM-G930P using Tapatalk

Thanks. Not a Trooper. LOL. The guard makes the whole thing just run better.

Colt lower. Hodge Defense upper/rail with Sionics 11.5 barrel.

[Joelski]

Thanks. Not a Trooper. LOL. The guard makes the whole thing just run better.

Colt lower. Hodge Defense upper/rail with Sionics 11.5 barrel.The rail had me thinking that. It looks similar to the Centurion on that model. Sweet gun!

Sent from my SM-G930P using Tapatalk

[fledge]

The rail had me thinking that. It looks similar to the Centurion on that model. Sweet gun!

Ah. I see it now. The rail looks like a mega and a centurion has a baby.

[Jerry R]

I'm glad somebody else said it before I did.

Maybe that's for when Jerry tells a burglar that he will 'shove this gun up your ass'... the guy would definitely believe it...

LOL .......... but I believe the quote from The Good, The Bad, and The Ugly: "When it's time to shoot, shoot. Don't talk."

[UWone77]

I'm missing a T2

4781

[Dstrbdmedic167]

Primary Weapons MK107 upper on my RA Mod 2 SBR! https://uploads.tapatalk-cdn.com/20180105/47920db7b89041d23d55ec9923fa950a.jpg

Sent from my SM-N950U using Tapatalk

[UWone77]

4807

[Former11B]

^^^^^ niiice


4808

[Aragorn]

4807

That's friggin awesome.

[BoilerUp]

4807

https://i.makeagif.com/media/10-01-2015/SQiVv7.gif

[762slinger]

https://uploads.tapatalk-cdn.com/20180114/a7afdc9cb5f70181f9c73dbae9ed8942.jpg

[762slinger]

https://uploads.tapatalk-cdn.com/20180114/9580d62eeb5c2d63893db7010ef43e37.jpg

[762slinger]

https://uploads.tapatalk-cdn.com/20180117/5aa92e4bccbf57eddba8a71a250a2e5f.jpg

[Deadwing]

http://i95.photobucket.com/albums/l145/Deadwing76/B587CC5F-1F65-4718-8A92-F33D3731B992_zpsov7wp7ap.jpg (http://s95.photobucket.com/user/Deadwing76/media/B587CC5F-1F65-4718-8A92-F33D3731B992_zpsov7wp7ap.jpg.html)

[Uffdaphil]

Nice Wing. Did a double take, it looks so close to one of mine.

[voodoo_man]

https://i.imgur.com/ya9QC91.jpg (http://www.vdmsr.com/2018/01/gemtech-gm9-9mm-silencery.html)

[Deadwing]

Nice Wing. Did a double take, it looks so close to one of mine.

Thanks, Phil. Great minds think alike i reckon! That is easily my favorite AR15 at the moment.

[UWone77]

4846

[Uffdaphil]

Looks sweet UW. Hope it’s not the gas factory my Glock 9 is.

Check your PMs in a couple of minutes.

[Former11B]

4846

How do the Colt mags run for you? I like the look of the stick mags

[UWone77]

How do the Colt mags run for you? I like the look of the stick mags

Colt mags and Metalforms work well.

There are some shitty $15-20 stick mags out there and they don't feed period.

[Deadwing]

http://i95.photobucket.com/albums/l145/Deadwing76/A4709A5C-7E3B-46EE-A7EC-D6439D77430A_zpsezd2138x.jpg (http://s95.photobucket.com/user/Deadwing76/media/A4709A5C-7E3B-46EE-A7EC-D6439D77430A_zpsezd2138x.jpg.html)

[Das Jared]

My Noveske wearing some fun toys.https://uploads.tapatalk-cdn.com/20180123/c7e0c6d17a5b302708ec2f0494f2b05e.jpghttps://uploads.tapatalk-cdn.com/20180123/211e3eb9b50353b2f2d7bcb36ea82b69.jpghttps://uploads.tapatalk-cdn.com/20180123/2546038ba4c4dcd28e13282d5c232137.jpg

Sent from my SM-G900P using Tapatalk

[UWone77]

Heh that’s sweet. M203 has always been on my list, thought this year I was going to pull the trigger but a few others have made it higher on the list for now.

One day I’m getting a 40mm photo prop! [:D]

[UWone77]

4895

[Jerry R]

http://www.weaponevolution.com/forum/attachment.php?attachmentid=4896&d=1517605225

[UWone77]

4943

[alamo5000]

My Noveske wearing some fun toys.https://uploads.tapatalk-cdn.com/20180123/c7e0c6d17a5b302708ec2f0494f2b05e.jpghttps://uploads.tapatalk-cdn.com/20180123/211e3eb9b50353b2f2d7bcb36ea82b69.jpghttps://uploads.tapatalk-cdn.com/20180123/2546038ba4c4dcd28e13282d5c232137.jpg

Sent from my SM-G900P using Tapatalk

That gun is awesome!!!

Hell I don't even know... but can you even get grenades for that thing without some kind of special whatevers?

[UWone77]

That gun is awesome!!!

Hell I don't even know... but can you even get grenades for that thing without some kind of special whatevers?

Mostly smoke, chalk and flare rounds. If you can find actual 40mm rounds, they're subject to a stamp on each round. No refunds once you fire them. [BD]

[Former11B]

Mostly smoke, chalk and flare rounds. If you can find actual 40mm rounds, they're subject to a stamp on each round. No refunds once you fire them. [BD]

If I was a go-zillionaire (as per Forrest Gump) Id probably buy a couple dozen

The chalk is neat and the flares are A LOT of fun. They’ll still punch through stuff like billboards and windshields. I’ve shot a ton of them

[Slippers]

The new LMT shorty forty is definitely on my shopping list for later this year.

[SINNER]

Mostly smoke, chalk and flare rounds. If you can find actual 40mm rounds, they're subject to a stamp on each round. No refunds once you fire them. [BD]

As far as I know even chalks and smokes are a no go now for 40mm.

http://www.thetruthaboutguns.com/2015/07/foghorn/atf-re-classifies-certain-flares-and-40mm-chalk-rounds-as-explosives-begins-confiscation/


And you need a certified and yearly tested storage container to store the grenades. IIRC That’s about 3k initially and $500-700 for yearly certs.

[Slippers]

As far as I know even chalks and smokes are a no go now for 40mm.

http://www.thetruthaboutguns.com/2015/07/foghorn/atf-re-classifies-certain-flares-and-40mm-chalk-rounds-as-explosives-begins-confiscation/


And you need a certified and yearly tested storage container to store the grenades. IIRC That’s about 3k initially and $500-700 for yearly certs.

No, that article is incorrect. Chalk does not require a stamp for each round. It's treated just like normal ammunition.

[UWone77]

4965

[UWone77]

4973

[alamo5000]

4965

NICE. What handguard is that?

[cjd3]

NICE. What handguard is that?
Looks like a CMT HDX Mod 3 (9.125 perhaps).

[UWone77]

Looks like a CMT HDX Mod 3 (9.125 perhaps).

Yes it's a Mod 3, but 7.2"

[voodoo_man]

https://i.imgur.com/vExkkD9.jpg (http://www.vdmsr.com/2018/02/suppressors-and-suppressor-accessories.html)

[UWone77]

5047

[Stickman]

https://farm5.staticflickr.com/4603/39577911442_ecdac6654b_b.jpg (https://flic.kr/p/23in9cu)Stickgunner (https://flic.kr/p/23in9cu) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr

[UWone77]

5111

[UWone77]

5116

[UWone77]

5118

[UWone77]

5133

[Uffdaphil]

300BLK coming together - 8.3” BA SS w/ 7.75 SLR Lite rail. Probably going with Omega 9K, but the Reece 7 do look sleek. May put the K can on the obese 9”. Comparison pic is with a 10.5” 5.56.

EDIT: 2nd pic won’t load, so no can joy today. At least I got one full sized. Been only teeny pics for a long while. I’ll give it one attempt in a seperate post.
5196

[Uffdaphil]

No Joy :(

[Joelski]

If you're uploading directly, go to your profile, near the bottom of the page, you should see an index of uploaded photo files. Delete some older ones and you should be able to post more pics. It's a function of the software and each member gets so much space.

[Uffdaphil]

Nothing in photos under profile. I’m on an iPad so maybe page appears different. Only reference to photos is directly under about me. But found attachments storage in settings. Deleted a bunch to see if that makes a difference.

And... nope that did not do it. Arrrgh.

[Jerry R]

http://www.weaponevolution.com/forum/attachment.php?attachmentid=5212&d=1523721000

[Jerry R]

Nothing in photos under profile. I’m on an iPad so maybe page appears different. Only reference to photos is directly under about me. But found attachments storage in settings. Deleted a bunch to see if that makes a difference.

And... nope that did not do it. Arrrgh.

Did you create an "Album" that you are uploading to? I believe the limit is 60 photos per album, but you can have multiple albums [:D] Nice thing about the albums is that there is a copy/paste BB Code box under the photos for ease of posting. That seems easier than using attachments.

[Uffdaphil]

Jerry, Nothing in any albums. Just tried uploading to one and got:

Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 48000001 bytes) in /homepages/26/d164419092/htdocs/www.weaponevolution.com/forum/includes/class_image.php on line 2411

[Jerry R]

48Mb is a huge allocation. I upload some big photos, but all less than 2Mb. Unsure of the exact nature of the error though. In "properties" how large is the photo you are trying to upload?

Try to upload to an album then link to the photo. I think that is easier than a direct upload unless from a 3rd party hosting site.

[Uffdaphil]

No idea how big. Just what automatically goes to the photo library from my iPad or iPhone camera. I see no way to modify the size.

[Uffdaphil]

Here goes with an app called Camera+ which allows downsizing and auto-loading into Apple photo library.
Qick dirty pic because there are 14+ inches of snow on my deck! 8.3” pdw vs 9” with normal stock.

EUREKA!!!

5216

[Joelski]

http://www.weaponevolution.com/forum/attachment.php?attachmentid=5212&d=1523721000

Jerry, how are you connecting that? Direct thread or booster? Pardon the ignorant question. I have no pistol cans (yet) and am not properly educated on the various methods for connecting them.

[alamo5000]

Jerry, how are you connecting that? Direct thread or booster? Pardon the ignorant question. I have no pistol cans (yet) and am not properly educated on the various methods for connecting them.

Any fixed barrel firearm does not need a booster.

[Stone]

"Here goes with an app called Camera+ which allows downsizing and auto-loading into Apple photo library.
Qick dirty pic because there are 14+ inches of snow on my deck! 8.3” pdw vs 9” with normal stock."

Yeah buddy, we got hammered this weekend huh? We are at 16" of snow and its still coming down! Nice pea shooters BTW!

[Jerry R]

Jerry, how are you connecting that? Direct thread or booster? Pardon the ignorant question. I have no pistol cans (yet) and am not properly educated on the various methods for connecting them.

The 22 can is a direct attach due to the fixed barrel. The only suppressors requiring a Nielsen Device are "tilt" barrels like the 1911 platform and others.

[Joelski]

http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/Walther%20P-22%20Military/20180415_224215_zps6qcgsmew.jpg (http://s997.photobucket.com/user/Joelski144/media/ARs%20and%20Pistols/Walther%20P-22%20Military/20180415_224215_zps6qcgsmew.jpg.html)

[gatordev]

Finally (http://www.weaponevolution.com/forum/showthread.php?5793-Transfer-Times&p=162290#post162290).

https://farm1.staticflickr.com/844/27654028298_32374eae1a_b.jpg

[Jerry R]

Nice! Congrats !

[UWone77]

Looks like the lower for the 416 Upper.

[gatordev]

Indeed.

[UWone77]

5333

[UWone77]

5339

[UWone77]

5344

[UWone77]

5353

[Former11B]

5366

[Joelski]

I want a 10.4" XM-8, dammit! I don't want to pay some insane fee to convert an SL-8, because the ghost of its ugliness would surely linger like shame after a night of coyote love.

Doesn't anybody know a good black market arms dealer that sells Malaysian Army surplus at conflict pricing!?! Dammit!

Dear ATF guy: j/k! [:D]

[UWone77]

I want a 10.4" XM-8, dammit! I don't want to pay some insane fee to convert an SL-8, because the ghost of its ugliness would surely linger like shame after a night of coyote love.

Doesn't anybody know a good black market arms dealer that sells Malaysian Army surplus at conflict pricing!?! Dammit!

Dear ATF guy: j/k! [:D]

Finally sending my SL8 to Tommy for a G36C Conversion here soon. Since Tommybuilt has his own US made G36 receivers, I bet he can make some XM8's.

Never cared for the looks of the XM-8, but it would definitely be a novelty.

[Joelski]

Since Tommybuilt has his own US made G36 receivers, I bet he can make some XM8's.

Never cared for the looks of the XM-8, but it would definitely be a novelty.

He's the only one I know of doing it.

[UWone77]

5388

[UWone77]

5392

[Former11B]

5393

[UWone77]

5401

[UWone77]

5404

[UWone77]

5409

[UWone77]

5418

[Former11B]

5427