View Full Version : NFA Picture Thread
Pages :
1
2
3
4
5
6
7
8
[
9]
10
Dstrbdmedic167
7 June 2018, 04:04
Not the final config but close enough. Cant wait to get out for some fun.
https://uploads.tapatalk-cdn.com/20180607/1a60651b0aa67efd1a8d4f10bf9eba6c.jpg
UWone77
7 June 2018, 06:36
For that Pzyik ... SBR Feeling....
Dstrbdmedic167
7 June 2018, 08:14
For that Pzyik ... SBR Feeling....🤣🤣🤣
Sent from my SM-N950U using Tapatalk
Joelski
7 June 2018, 13:34
Ever notice everything points to the right?
http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20180604_174514_zpslee8wxwc.jpg~original
gatordev
7 June 2018, 14:36
Ever notice everything points to the right?
It depends on how lazy I am with how much I want to edit in post.
ChattanoogaPhil
7 June 2018, 19:37
Ever notice everything points to the right?
http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20180604_174514_zpslee8wxwc.jpg~original
Depends on which side of the equator you're standing...
5436
FortTom
7 June 2018, 20:29
No..no..no, that's when you're taking a piss. Depending on which side of the equator you're on is which way you adjust windage to hit the bowl, and not the floor. Or which way it flows, or something.
FT.
ChattanoogaPhil
8 June 2018, 04:41
No..no..no, that's when you're taking a piss. Depending on which side of the equator you're on is which way you adjust windage to hit the bowl, and not the floor. Or which way it flows, or something.
FT.
After a week-long bender in the 1980s I awoke in a strange motel. When I noticed water spinning counterclockwise down the sink drain I knew I wasn't in Kansas anymore.
Joelski
8 June 2018, 06:21
After a week-long bender in the 1980s I awoke in a strange motel. When I noticed water spinning counterclockwise down the sink drain I knew I wasn't in Kansas anymore.Correction: the 80's were a decade long bender. There may have been some wakeful periods. [:D]
UWone77
8 June 2018, 18:55
5441
That looks like some fun.
Aragorn
8 June 2018, 20:37
5441
What is that?
Slippers
9 June 2018, 05:23
What is that?
Lage upper on a mac. Presumably a transferable since this is the NFA thread.
1974 PS M10 with Lage Max 10/31 and my older Max 10/45 Mk2
http://max-11.com
Jerry R
10 June 2018, 11:03
http://www.weaponevolution.com/forum/attachment.php?attachmentid=5445&d=1528653741
UWone77
11 June 2018, 10:37
How often do you get to shoot that can Jerry?
Jerry R
11 June 2018, 10:46
How often do you get to shoot that can Jerry?
Run it at Steve's during semi-annual range trips. Wet with a fresh wipe, it is good for 4 or 5 quiet shots. I have it on the night stand (dry) to kill flash if things go bump in the night. Steve has their Gen-2 (flat front end) and its' efficiency seems to be as good as, or slightly better. Price is very competitive with larger units. Only run it occasionally at the local range, work mostly on square box shooting there - eyes getting old [BD]
It is quite a bit shorter and lighter than the more efficient Ti-Rant.
Joelski
11 June 2018, 19:06
What is this"wet" you all speak of? Is it only a pistol thing?
Former11B
11 June 2018, 19:50
Run it at Steve's during semi-annual range trips. Wet with a fresh wipe, it is good for 4 or 5 quiet shots. I have it on the night stand (dry) to kill flash if things go bump in the night. Steve has their Gen-2 (flat front end) and its' efficiency seems to be as good as, or slightly better. Price is very competitive with larger units. Only run it occasionally at the local range, work mostly on square box shooting there - eyes getting old [BD]
It is quite a bit shorter and lighter than the more efficient Ti-Rant.
That’s a can meant for HD....or a few quiet shots behind the ear of an unexpecting sentry
GriffonSec
11 June 2018, 20:44
http://www.advanced-armament.com/06-What-is-a-WetDry-suppressor_df_40.html
Wet, the Poseidon runs about the first 7 shots at the sound level of a dry TiRant, IMHO. After that, you hear it get progressively louder. I like mine for what I bought it for, a nightstand indoor defense pistol. Certainly not at the "impress your friends at the range" kind of can. I'm waiting to see how it runs 9mm subs on the Glock, when I get some time on the range. For the record, I've tried water, lithium grease, gun grease and wire pulling gel. Wire pulling gel works the best, both greases worked well, but very smokey.
https://farm8.staticflickr.com/7665/26908101290_ff91d79aaf_b.jpg (https://flic.kr/p/GZM43S)Thompson Sig 1 (1 of 1) (https://flic.kr/p/GZM43S) by Steven Ragan (https://www.flickr.com/photos/111961163@N05/), on Flickr
Jerry R
12 June 2018, 05:49
What is this"wet" you all speak of? Is it only a pistol thing?
Some suppressors are designed to be run "wet". That means there is a solid wipe (normally a urethane disk) placed in front of the internal baffles and held in place by the end cap. Then a small amount of some fluid (wire pulling gel recommended by most MFG's) is put in the back of the tube before installing on the firearm. Surprisingly, passing through the gel and the wipe does not appear to affect accuracy. The gel helps cool and slow the "fireball" hence aiding in suppressing the sound of the shot. As more shots are fired, the gel is burned off and the shots get slightly louder. Once the "wet" is gone, the suppressor is at its' least efficient level. There may be rifle suppressors designed to be run wet, but I am not aware of any.
gatordev
12 June 2018, 06:36
Some suppressors are designed to be run "wet". That means there is a solid wipe (normally a urethane disk) placed in front of the internal baffles and held in place by the end cap. Then a small amount of some fluid (wire pulling gel recommended by most MFG's) is put in the back of the tube before installing on the firearm. Surprisingly, passing through the gel and the wipe does not appear to affect accuracy. The gel helps cool and slow the "fireball" hence aiding in suppressing the sound of the shot. As more shots are fired, the gel is burned off and the shots get slightly louder. Once the "wet" is gone, the suppressor is at its' least efficient level. There may be rifle suppressors designed to be run wet, but I am not aware of any.
A lot of rifle cans can have water (or some fluid) added into the tube and then run. I know SF specifically mentions it in their manuals and I believe the KAC NT4 has something about it (I don't own one to confirm). Obviously you don't fill the can up, it's just a little of the fluid poured in.
Former11B
12 June 2018, 07:01
I believe some “military” spec’d Cans are able to run with some fluid in them based on operational requirements but I wouldn’t go squirting wire pulling gel in my centerfire rifle suppressors based on pressures etc
Edited for emphasis
TENTEX
12 June 2018, 11:48
I believe some “military” spec’d Cans are able to run with some fluid in them based on operational requirements but I wouldn’t go squirting wire pulling gel in my centerfire rifle suppressors based on pressures etc
The Osprey was designed to be used “wet” or “dry.” If you are going to shoot “wet” for
increased sound suppression, insert a small amount (about 5 cc) of an ablative medium into
the back of the suppressor.
Joelski
12 June 2018, 11:58
A lot of rifle cans can have water (or some fluid) added into the tube and then run. I know SF specifically mentions it in their manuals and I believe the KAC NT4 has something about it (I don't own one to confirm). Obviously you don't fill the can up, it's just a little of the fluid poured in.
I'd be curious to learn the approved process for clearing a suppressor that's been submerged; whether there are any special dance steps that can assure you won't over pressurize the tube when firing. Is it still (was it ever) a thing to use condoms and RTV to limit water entry?
gatordev
12 June 2018, 12:36
I'd be curious to learn the approved process for clearing a suppressor that's been submerged; whether there are any special dance steps that can assure you won't over pressurize the tube when firing. Is it still (was it ever) a thing to use condoms and RTV to limit water entry?
I am by no means at a pointy end of a stick to definitively answer your question. I would imagine the process is similar to clearing the rest of the gun...opening up the chamber/unscrewing the can and dumping the water out. FWIW, when I was going through ROTC, there was a SEAL going through the ECP program a year or so ahead of me and at some point this subject came up. He said it was pretty common to use condoms and rubber bands when coming in over the beach.
Former11B
12 June 2018, 12:41
The Osprey was designed to be used “wet” or “dry.” If you are going to shoot “wet” for
increased sound suppression, insert a small amount (about 5 cc) of an ablative medium into
the back of the suppressor.
The Osprey is a centerfire pistol can, is it not?
gatordev
12 June 2018, 12:47
Independent of the Osprey...
From Surefire's manual:
To eliminate first round flash, detach suppressor and add a small amount of water into the rear of the suppressor or submerge suppressor under water. Be sure to drain all excess water before re-attaching suppressor.
NOTE: A "wet" suppressor can be used in potentially flammable environments; it reduces the possibility of a secondary ignition.
As Former11B said, no doubt part of a MILSPEC requirement.
Joelski
12 June 2018, 13:55
I am by no means at a pointy end of a stick to definitively answer your question. I would imagine the process is similar to clearing the rest of the gun...opening up the chamber/unscrewing the can and dumping the water out. FWIW, when I was going through ROTC, there was a SEAL going through the ECP program a year or so ahead of me and at some point this subject came up. He said it was pretty common to use condoms and rubber bands when coming in over the beach.
We used condoms for years on chest darts as makeshift flutter valves. Necessity being the mother of invention. Now we just stab the chest and let it vent. I was once asked "Joel, why the 10 gauge?" My reply was stolen directly from the great Sir Edmund Hillary. [:D] Moral of the story: breathe deeply around the Medics.
TENTEX
13 June 2018, 06:37
The Osprey is a centerfire pistol can, is it not?
Yes as originally intended but I frequently used it on my 300 BO with suppressed rounds and Klein Wire Lube for shooting wild pigs.
Gel stays in place as when the water evaporates.
Former11B
17 June 2018, 17:32
Yes as originally intended but I frequently used it on my 300 BO with suppressed rounds and Klein Wire Lube for shooting wild pigs.
Gel stays in place as when the water evaporates.
Subsonic rounds are much lower pressure than full power rounds, which most manufacturers highly recommend against using while shooting wet. That’s my point
UWone77
30 June 2018, 10:08
5530
gatordev
30 June 2018, 15:22
Very nice. I take it you're more of a vertical hand grip guy rather than an angled/handstop grip kind of guy? And the QD looks very understated.
Joelski
30 June 2018, 15:25
Tiptoe through the tax stamps!
http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20180314_204908_zpswpdzy35x.jpg~original
Uffdaphil
13 July 2018, 17:36
My first 12.5” — 5.56 Hodge Defense barrel. SLR 11.7” rail. Recce 5 can and Acog to be determined. I’m leaning towards The TA 110.
http://i150.photobucket.com/albums/s92/uffdaphil/A6D1D333-173B-4714-B888-D20752D2FE4F.jpeg (http://s150.photobucket.com/user/uffdaphil/media/A6D1D333-173B-4714-B888-D20752D2FE4F.jpeg.html)
http://i150.photobucket.com/albums/s92/uffdaphil/B761BC64-7A01-4DCC-B6D3-E9055774D87A.jpeg (http://s150.photobucket.com/user/uffdaphil/media/B761BC64-7A01-4DCC-B6D3-E9055774D87A.jpeg.html)
Former11B
14 July 2018, 15:53
TA33!! I want one of those (a TA33C) to replace my TA11J. Half the weight and only .5x less magnification
Uffdaphil
14 July 2018, 17:30
TA33!! I want one of those (a TA33C) to replace my TA11J. Half the weight and only .5x less magnification
Yeah, the 33 is great on a pencil barrel 14.5”. About the same balance as a
red dot. The 110 on the same gun feels like it wants to tip over like Guam.
UWone77
18 July 2018, 12:08
5583
UWone77
7 August 2018, 21:30
5693
tact
10 August 2018, 18:25
https://uploads.tapatalk-cdn.com/20180811/3a6d5d802c11750c668003b7c593c53b.jpg
UWone77
11 August 2018, 14:11
5707
Pyzik
11 August 2018, 14:14
Need a barrel, grip swap to FDE, vert grip then pew.
https://uploads.tapatalk-cdn.com/20180811/4a3b2f0e97e62acb3a2a81af34134d70.jpg
Sent from my SM-G930V using Tapatalk
Former11B
11 August 2018, 18:33
Need a barrel, grip swap to FDE, vert grip then pew.https://uploads.tapatalk-cdn.com/20180811/4a3b2f0e97e62acb3a2a81af34134d70.jpg
Sent from my SM-G930V using Tapatalk
A Geissele DDC charging handle would look good with that stock accent you’ve got on there
Pyzik
11 August 2018, 18:37
A Geissele DDC charging handle would look good with that stock accent you’ve got on thereI'll look at one. I typically go for BCM
Sent from my SM-G930V using Tapatalk
UWone77
13 August 2018, 04:06
5718
Uffdaphil
13 August 2018, 05:42
Ooh, I likes that tu-toner.
Pyzik
18 August 2018, 14:30
5718
Copy cat. [BD]
https://farm2.staticflickr.com/1831/43212003065_3fea9728ff_c.jpg (https://flic.kr/p/28QuP2B)
CMT PDW (https://flic.kr/p/28QuP2B) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Joelski
18 August 2018, 17:26
Top one has 100% more barrels.
Pyzik
18 August 2018, 17:39
Top one has 100% more barrels.Yeah yeah. Hahaha. One is on the way. The other is partially saved for
Sent from my SM-G930V using Tapatalk
Joelski
18 August 2018, 17:51
Trade or sell, half off! [:D]https://uploads.tapatalk-cdn.com/20180819/cbbe98915698f673e3cd3084acdb4a6d.jpg
And yes, I fully realize this post would cause a full-on, shittin' hemorrhage elsewhere on the interwebs. This place is cool because it doesn't take itself too seriously. [:)]
Stickman
1 September 2018, 12:15
https://farm1.staticflickr.com/965/41482569124_642c963494_b.jpg (https://flic.kr/p/26cF1z3)Stickman (https://flic.kr/p/26cF1z3) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
Former11B
4 September 2018, 13:04
http://i.imgur.com/SgkbCCT.jpg
WarEagle
5 September 2018, 14:51
https://farm2.staticflickr.com/1899/29562801907_5f5e49f0fe_b.jpg
UWone77
5 September 2018, 16:04
https://farm2.staticflickr.com/1899/29562801907_5f5e49f0fe_b.jpg
Clean. Is that one of the old stock LMT SOPMOD's ?
WarEagle
5 September 2018, 16:08
Clean. Is that one of the old stock LMT SOPMOD's ?
Yes, sure is...
UWone77
5 September 2018, 16:27
Yes, sure is...
Needs the Arisaka QD kit on it. [:D]
I love me some RIS II action though. Old and heavy, but still a classic and sexy AF.
WarEagle
5 September 2018, 16:29
Needs the Arisaka QD kit on it. [:D]
I love me some RIS II action though. Old and heavy, but still a classic and sexy AF.
Ha, I actually have a couple of the kits, just havent put them on. Yea man the ris II is literally the opposite of what the industry is going towards, but there still awesome haha
Das Jared
9 September 2018, 06:41
Mmmmhttps://uploads.tapatalk-cdn.com/20180909/3122ef22aecd3ce2d27ca25e1fb6e5fe.jpg
Sent from my SM-G900P using Tapatalk
Slippers
14 September 2018, 06:15
The last hurrah of my mm23e before it sold earlier this week.
https://youtu.be/eyfO14CfCIc
UWone77
25 September 2018, 10:12
5876
BoilerUp
25 September 2018, 19:35
My new GA Paladin on a 300 BLK SBR
https://photos.smugmug.com/photos/i-kBZ4Cxj/0/20248182/X2/i-kBZ4Cxj-X2.jpg
Joelski
26 September 2018, 04:34
My new GA Paladin on a 300 BLK SBR
https://photos.smugmug.com/photos/i-kBZ4Cxj/0/20248182/X2/i-kBZ4Cxj-X2.jpgBest combo evar!!!
UWone77
27 September 2018, 04:03
Future SBR
5878
UWone77
29 September 2018, 20:14
5884
UWone77
2 October 2018, 20:59
5891
Pyzik
4 October 2018, 20:31
Scored an AIM 11.5" barrel. 5.56 upper is together, not done. Need to replace sights. Need a different optic. But it's together https://uploads.tapatalk-cdn.com/20181005/04f6279821376f3c7045050f233bdbe2.jpg
Sent from my SM-G930V using Tapatalk
Pyzik
8 October 2018, 06:57
https://farm2.staticflickr.com/1969/31292366198_f9f824eda7_c.jpg (https://flic.kr/p/PFcyg9)
FDS_1001 (https://flic.kr/p/PFcyg9) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
ChattanoogaPhil
8 October 2018, 08:23
Nice pic.
That shot belongs in Fall gun publications.
https://farm2.staticflickr.com/1969/31292366198_f9f824eda7_c.jpg (https://flic.kr/p/PFcyg9)
FDS_1001 (https://flic.kr/p/PFcyg9) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Uffdaphil
12 October 2018, 11:50
Just added the Magpul bi-pod and Geissele CH. I like TR26, but kinda wish I had got a 3-15 or 4-16 instead. Still, it’s a hoot to shoot as is.
http://i150.photobucket.com/albums/s92/uffdaphil/FBA9484F-09E9-49CC-AF81-9AF3FFC9FE11.jpeg (http://s150.photobucket.com/user/uffdaphil/media/FBA9484F-09E9-49CC-AF81-9AF3FFC9FE11.jpeg.html)
http://i150.photobucket.com/albums/s92/uffdaphil/9A4666EE-4FC2-4522-A4E3-29E71175FD2A.jpeg (http://s150.photobucket.com/user/uffdaphil/media/9A4666EE-4FC2-4522-A4E3-29E71175FD2A.jpeg.html)
UWone77
14 October 2018, 19:52
5907
Joelski
15 October 2018, 04:23
This board needs a like button. Lotta nice hardware in here, fellas.
UWone77
20 October 2018, 06:00
5920
Dstrbdmedic167
20 October 2018, 12:10
I'll just leave this right here
5921
Pyzik
20 October 2018, 12:24
Battle of the decibels.
9mm subs and .300blk subs
https://uploads.tapatalk-cdn.com/20181020/b85c60c218d71bfc7cb84c2590cef79e.jpg
Sent from my SM-G930V using Tapatalk
FortTom
21 October 2018, 23:27
This board needs a like button. Lotta nice hardware in here, fellas.
I hear what you're saying, Joelski, but it seems half of these folks are pro photographers. One of the reasons that I'm ashamed to post pic's, and lower the standards of the forum.[:D]
FT[:D]
Uffdaphil
22 October 2018, 04:01
While I admire the beautiful pix of the pros, I also enjoy seeing fine hardware in the so-so shots.
Joelski
22 October 2018, 04:44
I hear what you're saying, Joelski, but it seems half of these folks are pro photographers. One of the reasons that I'm ashamed to post pic's, and lower the standards of the forum.[:D]
FT[:D]It doesn't stop me. Ask anybody! [:D]
Former11B
22 October 2018, 07:49
5934
S&W M76 full auto 9mm subgun
Pyzik
22 October 2018, 07:51
I hear what you're saying, Joelski, but it seems half of these folks are pro photographers. One of the reasons that I'm ashamed to post pic's, and lower the standards of the forum.[:D]
FT[:D]
Nah, I personally enjoy phone pics of good gear and gear getting used.
Got my 11.5" tightened up and on the range. .300 upper too. Both ran perfect. Still, I need to swap out this 7.5" barrel for a 8 or 8.5".
https://farm2.staticflickr.com/1922/30555215027_e3124ef635_c.jpg (https://flic.kr/p/Ny4sUc)
FDS_1619 (https://flic.kr/p/Ny4sUc) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
https://farm2.staticflickr.com/1934/30555210357_6a5939c25c_c.jpg (https://flic.kr/p/Ny4rvF)
FDS_1751 (https://flic.kr/p/Ny4rvF) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
BoilerUp
22 October 2018, 19:37
S&W M76 full auto 9mm subgun
Cool. I had to look that one up. Wasn't familiar with it. I didn't realize the Swedes were too good to sell us guns during Vietnam. I guess they showed us, huh?
UWone77
28 October 2018, 20:47
5945
UWone77
30 October 2018, 04:00
5946
Pyzik
30 October 2018, 04:39
5946
5945Man that looks fun
Sent from my SM-G930V using Tapatalk
UWone77
30 October 2018, 20:16
Man that looks fun
Sent from my SM-G930V using Tapatalk
Finally taking it to the range... hopefully Thursday.
5950
UWone77
10 November 2018, 04:05
One more.....
5969
Jerry R
4 December 2018, 17:38
AAC TiRant adapter came in ... https://uploads.tapatalk-cdn.com/20181205/d6fb3056cdc46b3e2dadf0c66b682267.jpg
Sent from my iPhone using Tapatalk
Das Jared
10 December 2018, 03:00
Post sample pkmhttps://uploads.tapatalk-cdn.com/20181210/c59e52c343d314cb008e288fc41e0dd9.jpghttps://uploads.tapatalk-cdn.com/20181210/edea2b1bfa74e9e13200dc2a27d22b73.jpg
Sent from my SM-G900P using Tapatalk
voodoo_man
10 December 2018, 06:31
https://i.imgur.com/TWK9Bm1.jpg (https://www.vdmsr.com/2018/12/coletac-suppressor-cover.html)
Das Jared
13 December 2018, 07:49
CZ P10C and a Por Lorranga Petite Corona Habanahttps://uploads.tapatalk-cdn.com/20181213/4bd8a5cb4de58ff23e88e943ad5e35aa.jpghttps://uploads.tapatalk-cdn.com/20181213/0cb0501f04557be87f4cb72d959f5a14.jpg
Sent from my SM-G900P using Tapatalk
Slippers
15 December 2018, 09:12
Postie.
https://i.imgur.com/o7Od0D4.jpg
Das Jared
15 December 2018, 18:03
19x with lantac barrel and omega 45khttps://uploads.tapatalk-cdn.com/20181216/6e43fc9ea866908d60561f021c3da859.jpghttps://uploads.tapatalk-cdn.com/20181216/3bf556db44c34e18608caa86f12d2937.jpg
Sent from my SM-G900P using Tapatalk
Jerry R
23 December 2018, 08:28
http://www.weaponevolution.com/forum/attachment.php?attachmentid=6091&d=1545582422
Pyzik
27 December 2018, 19:16
https://farm8.staticflickr.com/7910/32621612338_88b6edc75a_c.jpg (https://flic.kr/p/RGEhQ3)
FDS_3163 (https://flic.kr/p/RGEhQ3) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
UWone77
5 January 2019, 14:16
6125
UWone77
6 January 2019, 12:50
6127
UWone77
6 January 2019, 22:05
6129
MoxyDave
7 January 2019, 19:26
Sweet! Did you finally get your SCAR?
UWone77
7 January 2019, 20:42
Sweet! Did you finally get your SCAR?
I’ve got 3 now. 1 17 and 2 16s, one of which is an SBR as pictured
Slippers
7 January 2019, 21:59
I’ve got 3 now. 1 17 and 2 16s, one of which is an SBR as pictured
Now you need a 20S. [:D]
UWone77
7 January 2019, 22:27
Now you need a 20S. [:D]
I do.
Running out of space though. [BD]
Das Jared
8 January 2019, 06:56
https://uploads.tapatalk-cdn.com/20190108/1ac9c988851c63c41a0f443809a2da56.jpghttps://uploads.tapatalk-cdn.com/20190108/b874dcdd3008cf6ea5f9de91707a0eb8.jpghttps://uploads.tapatalk-cdn.com/20190108/d48e1c46ea8d12b35f062e7787495442.jpghttps://uploads.tapatalk-cdn.com/20190108/5fa9ec7e07d47e4f14376172f67d8e67.jpg
Sent from my iPhone using Tapatalk
Pyzik
17 January 2019, 14:46
^^ Very cool!
https://farm8.staticflickr.com/7888/46056360604_79430c58df_c.jpg (https://flic.kr/p/2daQTqQ)
#riflesarebetter (https://flic.kr/p/2daQTqQ) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Aragorn
17 January 2019, 15:06
^^ Very cool!
https://farm8.staticflickr.com/7888/46056360604_79430c58df_c.jpg (https://flic.kr/p/2daQTqQ)
#riflesarebetter (https://flic.kr/p/2daQTqQ) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
I like this a lot Dave. Nice gun.
UWone77
17 January 2019, 21:04
6189
UWone77
19 January 2019, 15:41
6196
alamo5000
19 January 2019, 16:41
6196
Very nice!
Quick question... I see people mount their lights on the right side of the handguard like you did here... I put mine on the left and I also have a VFG.
While I am running the rifle I can easily depress the tail switch with my left thumb without breaking my hold. That's why I put it there.
I guess my question is are you a lefty (hand not politics)? LOL
Aragorn
19 January 2019, 17:01
Dude. You've been here long enough you should know the answer to that.
Just sayin. ;)
Joelski
19 January 2019, 17:34
You really should have known.
alamo5000
19 January 2019, 17:53
Dude. You've been here long enough you should know the answer to that.
Just sayin. ;)
You really should have known.
The forum was lacking someone to make fun of recently so I figured I would volunteer myself for that post for a little while. [BD]
UWone77
19 January 2019, 18:25
I guess my question is are you a lefty (hand not politics)? LOL
Correct.
Pyzik
19 January 2019, 23:48
I like this a lot Dave. Nice gun.
Thanks!
https://farm5.staticflickr.com/4912/46084960644_269d424310_c.jpg (https://flic.kr/p/2ddntdY)Savior (https://flic.kr/p/2ddntdY) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
UWone77
2 February 2019, 20:36
6245
Joelski
3 February 2019, 04:55
6245Put a QD on the VG and that would ride nicely in a Ukulele gig bag.
Pyzik
5 February 2019, 09:18
https://farm8.staticflickr.com/7808/46944220022_1f12efcacc_c.jpg (https://flic.kr/p/2ewip6Q)
Faded (https://flic.kr/p/2ewip6Q) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Pyzik
5 February 2019, 09:19
6245
What upper receiver is that?
UWone77
5 February 2019, 10:49
What upper receiver is that?
Non-production CMT.
Pyzik
5 February 2019, 11:20
Non-production CMT.I had a feeling. Jelly.
Sent from my SM-G930V using Tapatalk
Pyzik
21 February 2019, 06:20
https://farm8.staticflickr.com/7857/46252479555_5b0ee016cf_c.jpg (https://flic.kr/p/2dtb3L4)
PDW (https://flic.kr/p/2dtb3L4) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Former11B
1 March 2019, 15:46
http://i.imgur.com/hMTtiNV.jpg
UWone77
2 March 2019, 14:02
6301
http://i.imgur.com/hMTtiNV.jpg
Gorgeous [emoji7]
Sent from my iPhone using Tapatalk
WarEagle
2 March 2019, 16:32
https://farm8.staticflickr.com/7915/47261564311_2bf32a195f_k.jpg
WarEagle
2 March 2019, 16:34
https://farm8.staticflickr.com/7819/32319743437_89bd6352d3_k.jpg
mustangfreek
2 March 2019, 22:27
Nice
Every post on this page is winning. (Insert thumbs up emoji thingy no we don’t have..[BD]...)
UWone77
3 March 2019, 08:43
6310
UWone77
4 March 2019, 23:30
6326
UWone77
6 March 2019, 12:15
6334
Joelski
7 March 2019, 04:25
6334A TT style mag extender would be a nice touch.
mustangfreek
9 March 2019, 00:17
6334
Yes!!
That right there has been on the dream list forever a small 9mm ,compact, suppressed machine..
..badass..
Drool..
mustangfreek
9 March 2019, 00:18
What’s it weigh...fit in your guitar bag..lol.
UWone77
9 March 2019, 04:02
6340
UWone77
17 March 2019, 04:04
6358
BoilerUp
17 March 2019, 07:28
Very nice. You going to custom cut some foam for that? Any plans to change the MD for something that a can mounts to?
UWone77
17 March 2019, 09:13
Very nice. You going to custom cut some foam for that? Any plans to change the MD for something that a can mounts to?
At some point yes. I'm just not sure what gun I plan to cut it out for. I also recently purchased 3 Pelican cases so I need to figure out and shuffle stuff around before I start cutting.
BoilerUp
17 March 2019, 23:13
At some point yes. I'm just not sure what gun I plan to cut it out for. I also recently purchased 3 Pelican cases so I need to figure out and shuffle stuff around before I start cutting.
Do you use anyone local for cutting the foam? I did the electric knife job on my last one. It works, but it ain't real pretty. Would prefer to have it a bit more professional
apmcdaniel
18 March 2019, 15:09
Do you use anyone local for cutting the foam? I did the electric knife job on my last one. It works, but it ain't real pretty. Would prefer to have it a bit more professional
First - that guitar case is going to be badass. Very cool!!! [emoji41][emoji106]
Second - Boiler: I've tried the electric knife, and then an electric wire (heat) cutter for foam. What I discovered is that I suck at cutting foam. So - Frank Eaton lives in Farmington, MO - about 90 min from my house. I heard about him from a LGS, so I looked him up. Just purchased a set for my Pelican 1700 and will be getting a LR 308 set for a 1720 case. I love his product. Once I get one finished and all set up, I'll post a pic. In the meantime: https://goo.gl/XyrBTs
Sent from my iPhone using Tapatalk
Joelski
19 March 2019, 04:55
Or get your tracing on, and take it to an upholstery shop. Close enough works for me. Besides, you can't tell when the case is put away, or you're shooting the gun. [:)]
apmcdaniel
19 March 2019, 10:37
Or get your tracing on, and take it to an upholstery shop. Close enough works for me. Besides, you can't tell when the case is put away, or you're shooting the gun. [:)]
Great idea, also. I did not consider that option.
Sent from my iPhone using Tapatalk
BoilerUp
19 March 2019, 14:27
Or get your tracing on, and take it to an upholstery shop. Close enough works for me. Besides, you can't tell when the case is put away, or you're shooting the gun. [:)]
Yes, but I want my internet pictures to look awesome.
SINNER
19 March 2019, 20:07
First - that guitar case is going to be badass. Very cool!!! [emoji41][emoji106]
Second - Boiler: I've tried the electric knife, and then an electric wire (heat) cutter for foam. What I discovered is that I suck at cutting foam. So - Frank Eaton lives in Farmington, MO - about 90 min from my house. I heard about him from a LGS, so I looked him up. Just purchased a set for my Pelican 1700 and will be getting a LR 308 set for a 1720 case. I love his product. Once I get one finished and all set up, I'll post a pic. In the meantime: https://goo.gl/XyrBTs
Sent from my iPhone using Tapatalk
I have a few of his cutouts. Never even used them. I hate the type of foam he uses. I wish his site was clearer that it’s not the Pelican type foam.
Pyzik
25 March 2019, 05:55
https://farm8.staticflickr.com/7816/46546123025_fbdaf4888f_c.jpg (https://flic.kr/p/2dV83Jv)
FDS_5690 (https://flic.kr/p/2dV83Jv) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
UWone77
30 April 2019, 19:54
6499
mustangfreek
1 May 2019, 23:15
That bottom is probably a hoot to shoot huh...
Hell there both killer.
That bottom is probably a hoot to shoot huh...
Hell there both killer.
Yes it is!
6503
mustangfreek
2 May 2019, 15:29
Drool....:P
So when we going shooting [:D]
I need to hurry up and get a pistol lower before this horseshit new law goes into action.. I’ve been wanting a PCC forever.. looks like fun and I have tons of 9 mil
apmcdaniel
2 May 2019, 15:32
https://farm8.staticflickr.com/7816/46546123025_fbdaf4888f_c.jpg (https://flic.kr/p/2dV83Jv)
FDS_5690 (https://flic.kr/p/2dV83Jv) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
This is great picture. I just grabbed an RMR for a pistol that I plan to Form 1 - how do you like the RMR on that rifle?
Sent from my iPhone using Tapatalk
apmcdaniel
9 May 2019, 14:06
6517
I like the de-constructed setting. That's an interesting AR configuration.
Sent from my iPhone using Tapatalk
UWone77
13 May 2019, 15:12
6519
MoxyDave
13 May 2019, 16:56
Dang son! That's quite a collection. I'm thinking $15K at least!
UWone77
13 May 2019, 18:11
Dang son! That's quite a collection. I'm thinking $15K at least!
I try not to add it up. LOL
Probably 5 cans not pictured and I think I have 4 more pending. Haven’t bought a can in awhile though. I think I’m done for a long time.
MoxyDave
14 May 2019, 09:58
Hah good idea, best to just have fun with them [:)]
I might pick up a 9mm can eventually for a PCC. Which ones would you recommend and why?
Former11B
14 May 2019, 10:09
Hah good idea, best to just have fun with them [:)]
I might pick up a 9mm can eventually for a PCC. Which ones would you recommend and why?
CGS Kraken
Rugged Obsidian 9 or 45 cal
Hard to go into the whys right now beyond I like them and they work well
MoxyDave
14 May 2019, 12:40
Understood; thanks for the reply. I will check those out first.
Would you say Silencer Shop is the best place to buy? It's been a long time since I've looked for a can ...
Former11B
14 May 2019, 12:50
Understood; thanks for the reply. I will check those out first.
Would you say Silencer Shop is the best place to buy? It's been a long time since I've looked for a can ...
Also the Dead Air Wolf 9SD should be high on the list. Sounds great
SS is a good place to buy but generally not as fast by 4-6 weeks due to their mass mailing/batch submission process.
Not sure if SS is a CGS dealer but capitol armory sells them and will Form 3 to any dealer
BoilerUp
14 May 2019, 21:04
CGS Kraken
Rugged Obsidian 9 or 45 cal
Hard to go into the whys right now beyond I like them and they work well
I have a Griffin Revolution 9 for my MPX and like it well enough, but if I was to buy another pistol can right now it would be the Rugged Obsidian 9.
UWone77
14 May 2019, 21:54
Big Fan of 9mm K cans.
TiRant 9s, Omega 9K, Wolf, they're all about the same performance wise.
3 lug it if you can.
MoxyDave
15 May 2019, 10:04
Ideally I'd like a can that's the same diameter as the handguard, and shorter than most ... fat and short, sounds familiar?
Joelski
15 May 2019, 14:34
It's only this long, but it thaaaat big around!! [:D]
mustangfreek
15 May 2019, 14:44
6519
There’s on odd number there, 21...I can help with that...lol
Ahhhh...I was hoping this year I might be able to swing it.. but kid graduating and house needs help..not enough monies... shit Ive even shot a weapon with one...And with our state taking away rights faster then I can keep up with...
WarEagle
18 May 2019, 17:12
https://live.staticflickr.com/65535/40911049363_f870ed5c0e_b.jpg
Former11B
18 May 2019, 20:27
Here’s my $250 Mini-4
6545
6546
mustangfreek
19 May 2019, 03:47
Nice score
I want a $250 mini...lol
Stickman
26 May 2019, 23:29
https://live.staticflickr.com/7894/46714791914_db4292a01c_b.jpg (https://flic.kr/p/2eb2w7N)Stickman (https://flic.kr/p/2eb2w7N) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
UWone77
2 June 2019, 15:35
6590
Jerry R
5 June 2019, 13:19
http://www.weaponevolution.com/forum/attachment.php?attachmentid=6596&d=1559765894
UWone77
7 June 2019, 10:19
6600
Jerry R
7 June 2019, 13:03
http://www.weaponevolution.com/forum/attachment.php?attachmentid=6603&d=1559937748
Jerry R
9 June 2019, 12:30
http://www.weaponevolution.com/forum/attachment.php?attachmentid=6608&d=1560108595
Aragorn
9 June 2019, 15:11
http://www.weaponevolution.com/forum/attachment.php?attachmentid=6608&d=1560108595
That’s nice Jerry. Any more pics of this? What caliber?
Jerry R
9 June 2019, 15:44
Thank you Sir. 8.5" 223 Wylde UM Rainier stainless barrel. Pic of the other side ... without the can
http://www.weaponevolution.com/forum/attachment.php?attachmentid=6567&d=1558805805
Aragorn
10 June 2019, 09:47
Yeah, very nice.
UWone77
10 June 2019, 20:32
6611
UWone77
12 June 2019, 10:31
6613
BoilerUp
12 June 2019, 17:51
Those are both really nice, UW. That B5 stock must be extra crunchy vs the creamy peanut butter of the other stuff. I think this came up before, but I should I presume you are lefty based on the light set-up?
What's your view on shooting the HK? I've heard less than flattery comments about them from a few sources. Any comparison you can draw against other piston offerings, like LMT? I love HK roller locks, but I just haven't been able to get excited about their ARs at those prices. Not saying I wouldn't love to have one. Maybe I should pick up the Brownells lower before July 1, but I just don't see myself dropping and $3+K on the parts kit etc when I still have a MWS to build.
gatordev
12 June 2019, 18:37
The calculus for the Brownell's kit falls apart for me because there's no HK barrel. That really is the heart of the system. I'd really like to shoot a 14.5 or 16" version of a 416, though, just to compare it to the 10.4".
I have just shy of 1,800 rounds through mine and it's unnecessary for the world I live in. But it's still fun to shoot. A bit more recoil impulse than a 10.3" DI gun, and a little gassier, assuming the DI gun is ported correctly. The HK is exceptionally accurate. I work with a guy who was a Marine infantryman and he eventually carried the M27 with an ACOG on top in AFG. He said he really liked the rifle, it was very accurate, and was a step up from the SAW.
UWone77
12 June 2019, 19:06
Those are both really nice, UW. That B5 stock must be extra crunchy vs the creamy peanut butter of the other stuff. I think this came up before, but I should I presume you are lefty based on the light set-up?
What's your view on shooting the HK? I've heard less than flattery comments about them from a few sources. Any comparison you can draw against other piston offerings, like LMT? I love HK roller locks, but I just haven't been able to get excited about their ARs at those prices. Not saying I wouldn't love to have one. Maybe I should pick up the Brownells lower before July 1, but I just don't see myself dropping and $3+K on the parts kit etc when I still have a MWS to build.
Correct, I'm a lefty. If I were you and had a remote interest in a future 416, I'd pick up a Brownells Lower, especially with the climate in this state. Plus they're $299 now instead of $399, well worth it IMHO. Try to catch it on a 10% off or $30 off $300 deal and you have a winner.
The calculus for the Brownell's kit falls apart for me because there's no HK barrel. That really is the heart of the system. I'd really like to shoot a 14.5 or 16" version of a 416, though, just to compare it to the 10.4".
I have just shy of 1,800 rounds through mine and it's unnecessary for the world I live in. But it's still fun to shoot. A bit more recoil impulse than a 10.3" DI gun, and a little gassier, assuming the DI gun is ported correctly. The HK is exceptionally accurate. I work with a guy who was a Marine infantryman and he eventually carried the M27 with an ACOG on top in AFG. He said he really liked the rifle, it was very accurate, and was a step up from the SAW.
gator pretty much nailed it. The math doesn't work out with the Brownells kit, especially without a barrel and the bolt. You're really just left with some lower parts, a crappy quad rail and some other bits. At those prices, you can wait for a PD trade in at Clydes Armory or other places. The PD trade in market is drying up from what I understand as departments didn't adopt 416 in masses, and are moving away from them because of expense.
The recoil impluse is sharper and noticeably more gas. If you get a newer one with a vented gas block, it may help with those issues. If you want a piston gun, I'd just get a SCAR, which IMHO is the best suppressor host on the market, or a PWS. The 416 however is iconic, and I just had to have one. It's a tack driver and everyone who's shot mine always walks away with a smile. I ended up with 2 only because I got consecutive serial #'s on the uppers, so I figured my 2 year old needed one too. [:D]
apmcdaniel
13 June 2019, 15:00
6611
I really like this build. Very thoughtful, well planned. That's one of the things I enjoy about the building - planning it out, having a blue print or rendering in mind. This SBR is the epitomy of a good plan.
Sent from my iPhone using Tapatalk
UWone77
13 June 2019, 16:12
I really like this build. Very thoughtful, well planned. That's one of the things I enjoy about the building - planning it out, having a blue print or rendering in mind. This SBR is the epitomy of a good plan.
Sent from my iPhone using Tapatalk
I got lucky on this one. Used a pre-existing SBR to put the stock on, then used a 7.5" Ballistic Advantage barrel on the HERA Arms 7" MLOK rail, with the SF can it fit like a glove.
UWone77
16 June 2019, 20:08
6628
UWone77
17 June 2019, 20:50
9mm and .45 UMPs
6633
UWone77
22 June 2019, 23:09
6666
MoxyDave
23 June 2019, 09:24
Looks like a P90 mated with a Tavor and had a baby [:)]
UWone77
23 June 2019, 11:13
Looks like a P90 mated with a Tavor and had a baby [:)]
I'm not going to lie Dave... did it for the gram. [:D]
The stock is a tad long for my tastes, but the foregrip is surprisingly comfortable for me. It's definitely "different" looking.
UWone77
23 June 2019, 15:42
6669
UWone77
24 June 2019, 03:59
6670
UWone77
25 June 2019, 04:02
6672
Jerry R
25 June 2019, 10:40
http://www.weaponevolution.com/forum/attachment.php?attachmentid=6674&d=1561484340
UWone77
25 June 2019, 11:04
Always loved the looks of that suppressor Jerry. Soooooooooooo short.
MoxyDave
25 June 2019, 12:26
That's a great combo Jerry. How many shots can you get before a) it's too loud and b) the wipes are worn out? I assume you shoot it wet ... grease or wire pulling gel or something else?
Jerry R
25 June 2019, 13:20
Always loved the looks of that suppressor Jerry. Soooooooooooo short.
That's a great combo Jerry. How many shots can you get before a) it's too loud and b) the wipes are worn out? I assume you shoot it wet ... grease or wire pulling gel or something else?
Thank you Sir(s). Works best wet - wire pulling gel from Lowes. First 5 or 6 shots are as quiet as the TiRant. Falls off quickly after that though.
MoxyDave
25 June 2019, 15:11
Good to know, thanks. That's a Poseidon correct? I love the size ... never considered a pistol can because they are typically so huge ...
Jerry R
25 June 2019, 15:30
Good to know, thanks. That's a Poseidon correct?
Yes, Thompson Machine Poseidon - First Generation. GriffonSec has a second generation. Flat front, "looks" a lot better, same efficiency.
UWone77
25 June 2019, 15:42
Good to know, thanks. That's a Poseidon correct? I love the size ... never considered a pistol can because they are typically so huge ...
Lot of shorter K cans now in 9mm, might want to think about those Dave. Not much longer than the Poseidon. Like you I generally didn't do pistol cans because they were so long.
UWone77
26 June 2019, 04:03
6675
UWone77
27 June 2019, 04:03
6681
Joelski
27 June 2019, 13:55
6682
UWone77
3 July 2019, 20:11
6689
MoxyDave
3 July 2019, 23:40
6689
Wow. With all those radiused edges, that magazine, and that stock this looks super futuristic. Dredd would love it!
Aragorn
4 July 2019, 08:38
Kinda making me wish I'd have gotten one of those stocks when they were on sale for so cheap.
UWone77
4 July 2019, 08:58
Kinda making me wish I'd have gotten one of those stocks when they were on sale for so cheap.
It's definitely worth $99. I should have bought 3 of these for that price.
UWone77
5 July 2019, 04:00
6690
Former11B
5 July 2019, 18:17
6691
Big and little
UWone77
5 July 2019, 20:20
6691
Big and little
Nice pair!
6692
UWone77
5 July 2019, 20:23
6695
apmcdaniel
5 July 2019, 20:39
6691
Big and little
That is a groovy pair!
Question: on the pistol, there is a white circle advice and to the right of the ejection port - what is that?
Sent from my iPhone using Tapatalk
mustangfreek
6 July 2019, 03:46
I’m assuming something like the WAR upper
https://www.innovativearms.com/war/
Former11B
6 July 2019, 03:58
That is a groovy pair!
Question: on the pistol, there is a white circle advice and to the right of the ejection port - what is that?
Sent from my iPhone using Tapatalk
Mustangfreek got it right; it’s the other side of the “killswitch” on a WAR upper
UWone77
8 July 2019, 15:14
6697
apmcdaniel
8 July 2019, 16:53
Mustangfreek got it right; it’s the other side of the “killswitch” on a WAR upper
I'm out of the loop on that one, just read it's webpage. Seems like a good deal in principle. Does it work as advertised?
Sent from my iPhone using Tapatalk
BoilerUp
8 July 2019, 23:13
Mustangfreek got it right; it’s the other side of the “killswitch” on a WAR upper
I wasn't familiar with those, either, but the more I think about it the more I like the concept. How are you liking it?
UWone77
14 July 2019, 04:02
6707
Aragorn
14 July 2019, 11:59
Man every time you post that I kick myself for not having grabbed one of those stocks.
UWone77
14 July 2019, 12:24
Man every time you post that I kick myself for not having grabbed one of those stocks.
Wish I had grabbed 3. Its growing on me.
Former11B
14 July 2019, 13:31
I wasn't familiar with those, either, but the more I think about it the more I like the concept. How are you liking it?
I'm out of the loop on that one, just read it's webpage. Seems like a good deal in principle. Does it work as advertised?
Sent from my iPhone using Tapatalk
I’ve got two; I’ve had one for probably 5-6 years and the second one for 3-4.
I like them a lot. Not as tunable as an adjustable gas block, since there’s one setting for unsuppressed, one for suppressed, and an “off” setting
The gas tubes are “proprietary”, but I think someone could make their own by cutting down the respective length tube and filing it to fit. Wouldn’t be as pretty but it would function in an emergency.
I’ve got some pictures of the inside of the switch I’ll dig up tonight
UWone77
19 July 2019, 04:48
6716
Stickman
19 July 2019, 20:11
https://live.staticflickr.com/7868/40471983683_5a490726da_b.jpg (https://flic.kr/p/24EnuJ8)Stickman (https://flic.kr/p/24EnuJ8) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
UWone77
29 July 2019, 19:00
6743
apmcdaniel
31 July 2019, 22:00
6743
Never gets old. This is a favorite. [emoji41][emoji106]
Sent from my iPhone using Tapatalk
UWone77
6 August 2019, 16:24
Never gets old. This is a favorite. [emoji41][emoji106]
Sent from my iPhone using Tapatalk
It's definitely unique, and actually very comfortable to shoot.
6764
BoilerUp
6 August 2019, 19:39
https://photos.smugmug.com/photos/i-jMVzbxh/0/ae24c053/X3/i-jMVzbxh-X3.jpg
Battle Cock
8 August 2019, 14:06
Finally joined the stamp collectors club, so I obviously had to put my new can on the most practical gun I own.
https://uploads.tapatalk-cdn.com/20190808/62eab7f3caa5c67b18bb2c8ac5b0cb60.jpg
MoxyDave
8 August 2019, 16:18
Heh ... did you get a new car too?
mustangfreek
10 August 2019, 02:04
Awesome blaster BC!
Heh ... did you get a new car too?
I approve the mustang [:D]
Battle Cock
10 August 2019, 16:34
The blaster is mine, the car is Axlenut’s, but I just leverage it for photo ops.
gatordev
12 August 2019, 13:12
https://live.staticflickr.com/65535/48522680301_a52f4136ce_b.jpg
UWone77
12 August 2019, 14:39
Ran 120 suppressed and some non-suppressed through her today. Ran perfectly.
6782
UWone77
13 August 2019, 16:24
6786
FortTom
13 August 2019, 17:26
Although I personally quit screwing with NFA stuff, I'd sure like to own that ^^^ very cool and practical.
FT[:D]
UWone77
13 August 2019, 19:16
Although I personally quit screwing with NFA stuff, I'd sure like to own that ^^^ very cool and practical.
FT[:D]
You should. It's a fun gun to run, and the CQR stock and grip are a lot more comfortable than I thought they would be.
cjd3
13 August 2019, 21:48
Until the next stamp:
https://i.imgur.com/KbyWPSyh.jpg
FortTom
13 August 2019, 23:10
You should. It's a fun gun to run, and the CQR stock and grip are a lot more comfortable than I thought they would be.
Wonder what that would handle with a 14.5 barrel without suppressor? I know it wouldn't be the best Close Quarters gun, but it looks like it would swing like a nice pair of Ta - Ta's or a nice O/U shotgun.
FT[:D]
gatordev
14 August 2019, 14:31
https://live.staticflickr.com/65535/48522700896_07e8a3a599_b.jpg
UWone77
14 August 2019, 14:33
https://live.staticflickr.com/65535/48522700896_07e8a3a599_b.jpg
Great photo!
Used to have a 1994 Rodeo myself. [:D]
UWone77
14 August 2019, 14:34
Until the next stamp:
https://i.imgur.com/KbyWPSyh.jpg
Looks like that 9.5 CMT rail was put to good use!
gatordev
14 August 2019, 16:21
Great photo!
Used to have a 1994 Rodeo myself.
Thanks. It seems the Portrait/bokeh option isn't all that forgiving on the iPhone. Something that's a little annoying given the resolution of the actual image. Still, it's pretty amazing at what it can do when used as Apple initially intended.
cjd3
14 August 2019, 21:35
Looks like that 9.5 CMT rail was put to good use!
Indeed! It wraps the Rainier Mod2 barrel nicely. Next up is light.
UWone77
17 August 2019, 23:46
6791
UWone77
19 August 2019, 20:29
6799
UWone77
20 August 2019, 20:14
6802
UWone77
20 August 2019, 20:14
6803
UWone77
21 August 2019, 20:35
6807
UWone77
23 August 2019, 10:42
6809
UWone77
25 August 2019, 21:00
6815
UWone77
26 August 2019, 20:55
6818
UWone77
28 August 2019, 04:06
6821
UWone77
28 August 2019, 20:02
6822
UWone77
30 August 2019, 08:12
6829
UWone77
1 September 2019, 09:09
6835
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.