PDA

View Full Version : NFA Picture Thread



Pages : [1] 2 3 4 5 6 7 8 9

rob_s
25 March 2009, 09:40
Strikes me that since this is WEVO, we need a picture thread here so Stickman can come and make us all feel inadequate.

[BD]

http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/6933-02.jpg

http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/Colt-6450-w-YHM-Can.jpg

http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/6933-01.jpg

http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/1912425DSC0231800x600border.jpg

http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/IMG_2531Medium.jpg

Army Chief
25 March 2009, 10:00
... and thus, a permanent post was born.

Let the games begin.

AC

Stickman
25 March 2009, 12:58
I end up with a few images that can probably get dropped into this thread.


http://stickman.rainierarms.com/galleries/AAC/IMG_9949%201028%20Stick.jpg

Stickman
25 March 2009, 14:25
http://stickman.rainierarms.com/galleries/Daniel%20Defense%2C%20Inc./got-no-soul-2-Stick.jpg

Stickman
25 March 2009, 14:28
http://stickman.rainierarms.com/galleries/American%20Defense%20MFG/IMG_7557%201028%20Stick.jpg

Stickman
25 March 2009, 14:29
http://stickman.rainierarms.com/galleries/Magpul%20II/IMG_8643%201028%20Stick.jpg

Stickman
25 March 2009, 14:30
Overblown early HDR attempt....


http://stickman.rainierarms.com/galleries/American%20Defense%20MFG/HDR%2001%201028%20Stick.jpg

Venom
25 March 2009, 14:34
stick , why the rubberband in the flipups?

Stickman
25 March 2009, 15:22
stick , why the rubberband in the flipups?


Grab and go. Yank on it and the covers pop up. I can't take credit, that optic was used by a PJ, who did the custom work himself.

I have a strange group of friends that are encouraged to use the Stick "Lend Lease" program when they are visiting foreign countries and doing Gods work. A lot of the gear never makes it back, or is traded off to others who are in country.

Army Chief
25 March 2009, 15:24
Before we get overrun with questions, no, we don't have any applications for the Stickman "Lend Lease" program. LOL

AC

Stickman
25 March 2009, 16:35
Not one of mine, but a very nice piece.


http://stickman.rainierarms.com/galleries/Noveske/IMG_5350%201028%20Stick.jpg

zero7one
25 March 2009, 17:06
Stick - Very nice job on the HDR pic. The rifle really "pops".

Hojutsu
5 April 2009, 19:07
A freinds Sig P556 SBR with my Colt 6933 SBR

http://img9.imageshack.us/img9/4217/editdsc311772hojutsumy9.jpg

Me shooting his Sig P556 SBR

http://img17.imageshack.us/img17/2540/editdsc309772hojutsuml3.jpg

Him shooting it

http://img258.imageshack.us/img258/9501/editdsc305472hojutsu.jpg

Army Chief
6 April 2009, 00:39
I've not seen an SBR-SIG before; that's actually a very attractive configuration. I hadn't realized that the chopped P556 form factor was every bit as compact as an AR with a comparable barrel. The gas system would seem to make it especially well-suited for these non-standard applications.

AC

Stickman
13 April 2009, 11:22
A friends...

http://stickman.rainierarms.com/galleries/AAC/IMG_8704%201028%20Stick.jpg

beavo451
14 April 2009, 10:40
http://xpnphg.blu.livefilestore.com/y1pYH8oJvTh6mmc3XZfFVcCC8p-CcvLRkxUJlFa4Z40p8ku-xOMWmswtfH9Y2b2JjbwKCHNrEUK0TiXfy8s9JQLd24fwgbfWGN Y/aahdr1.jpg

Schwome
14 April 2009, 22:04
Overblown early HDR attempt....


http://stickman.rainierarms.com/galleries/American%20Defense%20MFG/HDR%2001%201028%20Stick.jpg


Sorry to hijack, but I was wanting to add a 12.5" Noveske Crusader & MI 10" FF to my Vltor MUR & was wanting to know if this would make a good mid-range rifle, or if it would be to short to be practicle... if so, how bout a 10.5" CQB. I am looking at using a Leupold Mark 4 1.5-5x20mm. Would this be practicle, Thanks in advance Stick, Schwome

Stickman
15 April 2009, 10:13
For a medium range weapon, I would look at a 16", but that is more a matter of what you consider "medium" distance. Your needs may be very different than mine, and because of that, a 12.5" may keep you within the velocity threshold you desire.

Army Chief
15 April 2009, 10:35
I would agree with that assessment. I generally don't think most AR applications really require a 20" or longer tube, and 16" or 18" seems to be well-suited to most mid-range SPR applications these days; that said, a Noveske 12.5" is certainly going to print better than most. The problem is that accuracy is only a part of the equation, since you're also giving up velocity on these sub-14.5" setups. That's not much of a concern at in-your-face distances, but if you're anticipating ranges of 100m, 200m or more, then you're definitely going to be better served by a non-NFA tube.

AC

Stickman
15 April 2009, 10:42
Here is a 16" with can.... the UBR stock allows for a much more adjustable package, which tends to show its benefits in urban settings.

http://stickman.rainierarms.com/galleries/AAC/IMG_0347%201028%20WEVO.jpg

Stickman
15 April 2009, 10:43
Here is another 16" suppressor setup.


http://stickman.rainierarms.com/galleries/AAC/IMG_7601%20B%201028%20Stick.jpg

Schwome
16 April 2009, 06:44
Here is another 16" suppressor setup.


http://stickman.rainierarms.com/galleries/AAC/IMG_7601%20B%201028%20Stick.jpg

Thanks Stick for some inspiration. Last questioin: is that a DD 12.0 lite w/ the new ARMS front sight. I would like to do this, but all the 16" barrels that I have found have a carbine length cas tube

Stickman
16 April 2009, 09:33
Thanks Stick for some inspiration. Last questioin: is that a DD 12.0 lite w/ the new ARMS front sight. I would like to do this, but all the 16" barrels that I have found have a carbine length cas tube


Its a DD 12.0 Lite over a midlength gas system, which means the gasblock is contained under the rail. The ARMS 41B is is there, but is only being used as a front sight, and not as a gasblock.

zero7one
18 April 2009, 06:52
http://i726.photobucket.com/albums/ww265/zero7one/IMG_8127.jpg

zero7one
24 April 2009, 06:46
http://i726.photobucket.com/albums/ww265/zero7one/IMG_8530.jpg

chase102798
28 April 2009, 20:14
http://i134.photobucket.com/albums/q111/rob_s/gun%20stuff/1912425DSC0231800x600border.jpg


I LOVE THIS PICTURE! VERY NICE!!

-chase102798

Titleist
29 April 2009, 14:09
Sitting at a friend's house for a few weeks till the paperwork on my lower clears (any day now):

http://lawndartdesign.com/guns/SBR_upper_01.jpg

http://lawndartdesign.com/guns/SBR_upper_02.jpg

Todd
2 May 2009, 18:59
I haven't been around for a while - just been busy - but here are a couple of my favorite NFA items. [:D]

http://primaryweapons.com/wevo/Diablo_L5.jpg

http://primaryweapons.com/wevo/MP_light.jpg

Todd

Cameron
3 May 2009, 15:35
http://farm3.static.flickr.com/2538/4153736058_94a6a67ac8_o.jpg

Stickman
3 May 2009, 18:20
Good aggressive stance, is that a 10.5"? If so, who makes it, and how reliable has it been for you?

Cameron
3 May 2009, 21:12
Stick, it is a LMT 10.5" upper with a DD 10 Lite rail, it has been 100% reliable in any configuration that I could put together, SA/FA BCG, Carbine up to H2 buffer or even running a can, and with all ammo types, except Wolf which is woefully underpowered and I have to use a carbine buffer instead of H2 buffer.

http://farm3.static.flickr.com/2560/4152975641_7e09ef2265_o.jpg

rob_s
11 May 2009, 02:39
Cameron, given any thought to mounting that light at 12 o'clock? I've been using it on my suppressed/railed SBR and am quite happy with it. It looks, from your support hand position, that this light location could work well for you.

http://i134.photobucket.com/albums/q111/rob_s/website/X300%20VS%20TLR1/X300mounted.jpg

Titleist
23 May 2009, 17:20
http://lawndartdesign.com/guns/SBR_final.jpg

federalist22
24 May 2009, 07:30
RRA Tactical CAR A4

http://i699.photobucket.com/albums/vv358/federalist22/RockRiver_TacticalCARa4-FDEa.jpg


S&W M&P15ORC (Ares Piston (Bushmaster Retrofit)) w/ DD Omega 7 Piston Rail

http://i699.photobucket.com/albums/vv358/federalist22/SW_MP15ORC-FGa.jpg


Rock-ola M1 Carbine (Serial dates JAN-MAY 1944) - all Rock-ola parts

http://i699.photobucket.com/albums/vv358/federalist22/Rock-ola_M1carbine.jpg

lsujim
31 May 2009, 20:49
http://i200.photobucket.com/albums/aa107/lsujim/XM177E1_4.jpg

Stickman
4 July 2009, 08:44
http://www.flickr.com/photos/stickgunner/3683780026/

http://farm3.static.flickr.com/2455/3683780026_741b9a4445_o.jpg

agentcox000
6 July 2009, 20:04
http://www.hunt101.com/data/500/aim3.JPG

http://www.hunt101.com/data/500/aim2.JPG

Stickman
18 July 2009, 09:41
http://stickman.rainierarms.com/galleries/Magpul%204/IMG_8129%201028%20Stick.jpg

Todd
18 July 2009, 12:41
http://primaryweapons.com/wevo/DC10.jpg

PWS DC10

--------------------------------------------------------------------------

Todd

Narco
28 July 2009, 21:11
http://farm4.static.flickr.com/3483/3767708570_c227dcdfd8_b.jpg

eternal24k
30 July 2009, 20:14
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs092.snc1/4666_570066330410_6910024_34839566_4167825_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs038.snc1/3315_567645925920_6910024_34724833_176731_n.jpg
Hmmmm... I have always used the [IMG] code, but I can't get it to work from Photobucket.
Anyways, here are my 1st 2

Titleist
12 August 2009, 21:42
http://lawndartdesign.com/guns/Pair_03.jpg

Stickman
12 August 2009, 21:55
http://stickman.rainierarms.com/galleries/Magpul%204/0O2P1736-A-Stick.jpg

rob_s
13 August 2009, 02:40
http://i134.photobucket.com/albums/q111/rob_s/website/BFG%20Vickers%20Single%20Point%20Mod/DSC_3470Medium.jpg

Stickman
20 August 2009, 13:46
http://stickman.rainierarms.com/galleries/Magpul%204/0O2P9790-1024-Stick.jpg

spyder
22 October 2009, 04:47
http://i598.photobucket.com/albums/tt63/andyjia/spike75.jpg
http://i598.photobucket.com/albums/tt63/andyjia/spike-magpul.jpg
http://i598.photobucket.com/albums/tt63/andyjia/aac-sw-spike.jpg
http://i598.photobucket.com/albums/tt63/andyjia/noveske10-5-SBR.jpg
http://i598.photobucket.com/albums/tt63/andyjia/noveske-switchblock.jpg

1st one is 7.5" SBR, 2nd is 10.5" w/switchblock

Cameron
10 November 2009, 21:47
http://farm3.static.flickr.com/2516/4150786606_b593163ce1_b.jpg

SPDGG
11 November 2009, 00:54
http://stickman.rainierarms.com/galleries/Magpul%204/0O2P1736-A-Stick.jpg
Sweet 5.7 !!! & Like the "MagPul" PMAG Brass Catcher ;)

Cameron
11 November 2009, 14:10
http://farm3.static.flickr.com/2686/4150748748_d2aae9a944_b.jpg

Cameron
6 December 2009, 16:17
http://farm5.static.flickr.com/4037/4163991975_2b478a37fd_o.jpg



http://farm3.static.flickr.com/2715/4163968505_2358f4f4f1_o.jpg



http://farm3.static.flickr.com/2661/4164726438_37b0347466_o.jpg


http://farm3.static.flickr.com/2561/4167615834_aa23a5887a_o.jpg

SDDuc996
23 December 2009, 03:45
http://lawndartdesign.com/guns/Pair_03.jpg

How's that (ridiculously overpriced) compensator working for you? Does it suppress any flash at all? Do you notice a lack of muzzle rise with it?

Keebsley
23 December 2009, 09:44
http://i17.photobucket.com/albums/b70/Keebsley/DSC00050.jpg

My newest baby. Just need a T1 and a redimag.

federalist22
23 December 2009, 19:52
http://stickman.rainierarms.com/galleries/Magpul%204/0O2P1736-A-Stick.jpg

Stick,

What do you have going on op of that rail?

Army Chief
23 December 2009, 20:22
Unless I'm missing something, you're just looking at an AR57 5.7 drop-on upper ...

Stickman's 5.7 Upper Discussion Thread (http://www.weaponevolution.com/forum/showthread.php?t=918)

Stickman's AR57 Product Review (http://www.weaponevolution.com/forum/showthread.php?p=7065)

Rainier Arms Product Link (http://www.rainierarms.com/?page=shop%2Fmanufacturer&manufacturer=84)

Manufacturer's Website (http://www.57center.com/)

AC

federalist22
24 December 2009, 05:26
AC, Thanks. That is one caliber I tend to stay away from. My brother has a FN 5.7 pistol and while it was ok to shoot, I would never buy one due to the ammo cost and availability. My brother always has one gunshop that he buys ammo from and the guy there rips him off everytime.

For what it's worth, it does look cool. I am just not interested in that caliber.

Army Chief
24 December 2009, 08:13
I'm with you there. Personally, if I were going the 5.7 route, I would be most interested in the P/PS-90, due to the great potential I see in that particular form factor -- better yet, give me a Magpul PDR-C, as that was easily the most exciting "if only" PDW candidate of recent times.

AC

eternal24k
8 January 2010, 14:05
i got a new camera and did a Stickman tribute
http://i193.photobucket.com/albums/z152/eternal24k/017-2.jpg

Cameron
21 January 2010, 21:29
made a few changes....

http://farm3.static.flickr.com/2686/4150748748_d2aae9a944_b.jpg


http://farm5.static.flickr.com/4043/4294147299_97b13869a0_b.jpg

OUTLAW-ONE
25 January 2010, 18:28
Noveske N4 10.5'' , AAC Blackout, MOE handguards & stock, MIAD.

http://media7.dropshots.com/photos/254538/20100122/b_152956.jpg

http://media6.dropshots.com/photos/254538/20100119/b_155400.jpg

http://media8.dropshots.com/photos/254538/20100119/b_155351.jpg

Cameron
29 January 2010, 15:17
http://farm5.static.flickr.com/4055/4298798584_d65f618261_o.jpg

Cameron
1 February 2010, 14:42
http://farm5.static.flickr.com/4031/4322925709_8050e03377_b.jpg


http://farm3.static.flickr.com/2639/4323660022_790a228b58_b.jpg

Cameron
5 February 2010, 11:59
http://farm3.static.flickr.com/2761/4333300056_4b920dd7f8_o.jpg

usbp379
13 February 2010, 08:05
http://primaryweapons.com/wevo/DC10.jpg

PWS DC10

--------------------------------------------------------------------------

Todd

Nice. Who's lower is that?

ginarik
23 February 2010, 20:35
Here is a new build for my 7.5" SBR.

Enjoy :)

http://i155.photobucket.com/albums/s300/dogg-e/75_build.jpg

Stickman
8 March 2010, 11:57
http://stickman.rainierarms.com/galleries/Magpul%20V/IMG_1087-1024-Stick.jpg


http://stickman.rainierarms.com/galleries/Magpul%20V/IMG_1086-1024-Stick.jpg

Stickman
8 March 2010, 11:58
http://stickman.rainierarms.com/galleries/Magpul%20V/UBR%20BFG%20T1%201028%20WEVO.jpg


http://stickman.rainierarms.com/galleries/Magpul%20V/IMG_1351-1024-Stick.jpg

Rated21R
8 March 2010, 12:09
Stick, how do you like the KAC Micros compared to say the Troys or Magpuls? I'm curious about them.

Stickman
8 March 2010, 13:17
I like them, but its hard for me to get super excited about BUISs. They either work or they don't. [BD]

Michael
8 March 2010, 17:56
http://stickman.rainierarms.com/galleries/Magpul%20V/UBR%20BFG%20T1%201028%20WEVO.jpg


http://stickman.rainierarms.com/galleries/Magpul%20V/IMG_1351-1024-Stick.jpg




Stick,

What are the specs on these? I particularly like the bottom one with the VTAC rail. One of those with the EOTech XPS or a T1 would be great for work....

Stickman
8 March 2010, 18:49
The bottom of them is John Noveske's blaster, I can't remember what the specs are.

Michael
8 March 2010, 22:33
The bottom of them is John Noveske's blaster, I can't remember what the specs are.

Ah, I see. Looks like maybe a 10.5 inch. Very nice.

TripleBravo
26 March 2010, 17:16
http://i718.photobucket.com/albums/ww189/wjt1169/yhm%207%20and%20a%20half%20suppressor%20ready%20bu ild/leftangle01-1.jpg

http://i718.photobucket.com/albums/ww189/wjt1169/yhm%207%20and%20a%20half%20suppressor%20ready%20bu ild/rightangle02.jpg

Rated21R
26 March 2010, 19:06
http://stickman.rainierarms.com/galleries/Magpul%20V/IMG_1087-1024-Stick.jpg


http://stickman.rainierarms.com/galleries/Magpul%20V/IMG_1086-1024-Stick.jpg

are these 10.5 builds?

Keebsley
30 March 2010, 18:34
http://i17.photobucket.com/albums/b70/Keebsley/DSC00071.jpg

goteron
9 April 2010, 07:52
Here are a few of mine...

Savage MKii with 22Sparrow. Insanely Quiet

http://i575.photobucket.com/albums/ss192/goteron/152f18da.jpg

Ruger Mk3 with same can

http://i575.photobucket.com/albums/ss192/goteron/IMG_8174.jpg

SBR AR with AAC SPR/M4

http://i575.photobucket.com/albums/ss192/goteron/IMG_8118-1.jpg

I have a SCAR-H Pending that will go on this:

http://i575.photobucket.com/albums/ss192/goteron/IMG_8140.jpg

And 2 more cans. Its an addiction

TwoSqeeze
28 April 2010, 19:43
http://img28.imageshack.us/img28/3486/sbr007.jpg

http://img213.imageshack.us/img213/1870/sbr001.jpg

Keebsley
28 April 2010, 22:36
All sorts of badass right there.

JTrusty
30 April 2010, 10:42
http://photos.gearsector.com/galleries/Carbine%20Images/00.jpg

Stickman
1 May 2010, 09:04
http://stickman.rainierarms.com/galleries/Magpul%20V/IMG_1096-1024-Stick.jpg


http://stickman.rainierarms.com/galleries/Magpul%20V/IMG_6791-1028-Stick.jpg

Stickman
1 May 2010, 09:04
http://stickman.rainierarms.com/galleries/Magpul%20V/IMGL3810-1024-Stick.jpg

m249saw
3 May 2010, 13:43
http://img28.imageshack.us/img28/3486/sbr007.jpg

http://img213.imageshack.us/img213/1870/sbr001.jpg

How do you like those DD Irons?

TripleBravo
21 May 2010, 09:12
http://i718.photobucket.com/albums/ww189/wjt1169/A2%20lower%2010%20in%20upper/rightside01.jpg

TwoSqeeze
23 May 2010, 11:52
How do you like those DD Irons?

They are great. Very study and I like not having to flip anything up should my optic go down.

-TS

TwoSqeeze
23 May 2010, 11:54
http://i718.photobucket.com/albums/ww189/wjt1169/A2%20lower%2010%20in%20upper/rightside01.jpg

That is a very interesting setup. How is that rifle length buffer / stock combo work out with the carbine gas system?

-TS

TripleBravo
23 May 2010, 12:13
To be honest, this was a merging of two projects that I though made for an interesting look paired up. I took the opportunity to snap a few pics, but the upper and lower are now off to their respective owners. It was never fired in this configuration.

Mega
20 July 2010, 17:51
http://stickman.rainierarms.com/galleries/Daniel%20Defense%2C%20Inc./got-no-soul-2-Stick.jpg

Stick,

What length quadrail and barrel?
I have a project in process that has an 11" LaRue rail and I'm planning on a 12 or 12.5" barrel with the 'pig'.

That thing is so close to mine that it's creepy (in a good way), 'cept I'm using a Aimpoint Comp M4s.

GriffonSec
22 August 2010, 17:19
Finally, I get to add to this thread......

Just finished the build about an hour ago, there's some minor tweaking left to do, Aimpoint H1 arrives tomorrow along with ADM mount.

Noveske 8.5" 6.8 SPC on registered form 1 lower -

http://i624.photobucket.com/albums/tt323/griffonsec/fastshot68.jpg


As soon as my busy season dies first of Septemeber, going to do a full on shoot here at the house and will do a full write up on the rifle then, along with much much better pics.

Parts:

Upper:
Noveske 8.5" SS barrel in 6.8SPC
Black River Tactical "Covert Comp" - Also will be testing/trying out the Battle Comp after zeroing
DD Lite 7.0
Rainier WEVO special upper
LMT Auto carrier, Noveske matched bolt
BCM mod3 charging handle
Magpul MBUS (I have, and was going to run DD fixed F/R sights, but I really liked the sight picture of these much better)
H1 and mount arrive tomorrow

Lower:
Form 1 Noveske lower
Giessele SSA trigger
Magpul Trigger guard
MOE grip
BAD lever
ASAP plate
KNS pins (pistol gas + 6.8, cannot hurt at all)
G&R tactical lower parts "finishing" kit
H2 buffer, standard carbine length spring
VLTOR IMOD stock (chucked the MOE I had for this, I really like this stock on this setup!)

Can't wait to zero and really shoot this, along with waiting for Gear Sector Handstops, Offset rail (TLR1 mount), and QD socket.

Sling is SKD "Drop Slider" single point, mags are Barrett and C-Prod

Steve

oregonshooter
22 August 2010, 17:46
http://cerakoter.com/gallery/shotguns/remy_870/remy_870_sbs_sniper_grey_01.jpg

Tactical Ninja
28 August 2010, 13:52
This is my SIG556 SBR with troy quadrail, Magpul Miad Grip, Magpul UBR Stock w/cheek riser, Magpul AFG, Magpul XTM Panels, AAC Blackout FH, Eotech 552, Jager UBR Strike Plate, and Mag Grip PMAG Coupler.
http://a.imageshack.us/img836/6475/dscf3854m.jpg
Changed the XTM Panels off the top to a Magpul ladder cover, and though you can't see it switched the strike plate to the Magpul.
http://img545.imageshack.us/img545/5912/sig4x.jpg

m24shooter
3 September 2010, 17:16
Mossberg 590A1 SBS

http://i15.photobucket.com/albums/a391/m24shooter/590A1%20SBS/590a1sbs.jpg

hatchtrikk
5 September 2010, 09:00
http://i718.photobucket.com/albums/ww189/wjt1169/yhm%207%20and%20a%20half%20suppressor%20ready%20bu ild/leftangle01-1.jpg

http://i718.photobucket.com/albums/ww189/wjt1169/yhm%207%20and%20a%20half%20suppressor%20ready%20bu ild/rightangle02.jpg



Would you mind giving the details of the rail/suppressor combo? I am currently building an SBR and this is the look that I am going for.

Thanks in advance,

-WRECKS-

TripleBravo
6 September 2010, 02:13
Would you mind giving the details of the rail/suppressor combo? I am currently building an SBR and this is the look that I am going for.

Thanks in advance,

-WRECKS-

It's a YHM lightwieght rail in "spector" length with a 7.5" barrel and a YHM 5.56 suppressor (QD model).

hatchtrikk
6 September 2010, 12:50
Thank you. I was under the impression that barrels under 10.5 inches were "un-suppressable". Does it still function and cycle properly?

TripleBravo
6 September 2010, 18:23
It works...I advised against it, but it works. A SWAT member wanted this upper rigged for CQB use. He's got a ton of rounds through it and it functions fine. The short barrel and pistol gas system will surely burn up the suppressor more quickly.

(Edit: I don't know why this says "rounds rounds" I only typed the word once, and when I try to edit to delete the double tap, the second "rounds" doesn't show up...odd.)

Mega
6 September 2010, 18:59
I have a very similar build in the works with a 5" barrel, a 10" quad-rail, and a semi-covered suppressor.
Once my tax stamps come back and I can lay my hands on it, I will post photos.
For now... it sits in my builders safe.

TripleBravo
6 September 2010, 23:48
This is how the SWAT officer runs that upper...

http://i718.photobucket.com/albums/ww189/wjt1169/yhm%207%20and%20a%20half%20suppressor%20ready%20bu ild/YHMsuppressed01.jpg

Stickman
11 September 2010, 22:04
http://stickman.rainierarms.com/galleries/KAC/IMG_0920-1024-Stick.jpg


http://stickman.rainierarms.com/galleries/KAC/IMG_9842%20A%201024%20Stick.jpg

Stickman
11 September 2010, 22:05
http://stickman.rainierarms.com/galleries/KAC/IMGL2837-A-1024-stick.jpg



http://stickman.rainierarms.com/galleries/KAC/IMG_1017-1024-Stick.jpg

Stickman
11 September 2010, 22:06
http://stickman.rainierarms.com/galleries/KAC/IMGL8961-1024-Stick.jpg

GriffonSec
11 September 2010, 22:10
Had a couple of employees here to shoot at the house today, one took this pic of my completed 6.8 SBR.

http://i624.photobucket.com/albums/tt323/griffonsec/lifeliberty.jpg

TripleBravo
12 September 2010, 01:52
Geez....I'm continually impressed with the contents of your gun safe, Stick! [adore]

Jerry R
12 September 2010, 08:06
Had a couple of employees here to shoot at the house today, one took this pic of my completed 6.8 SBR.

http://i624.photobucket.com/albums/tt323/griffonsec/lifeliberty.jpg

Congrats on a very nice build !!

m24shooter
12 September 2010, 09:43
Added the SF weaponlight. After adding a Hogue ShortShot stock this should be finished.

http://i15.photobucket.com/albums/a391/m24shooter/590A1%20SBS/sbs590a1sf.jpg

http://i15.photobucket.com/albums/a391/m24shooter/590A1%20SBS/sfswitchblocker.jpg

m249saw
12 September 2010, 11:20
GriffonSec how is that BattleComp working out?

GriffonSec
12 September 2010, 11:45
Loving it. Probably not everyone's cup of tea on such a short barrel, but noise and blast is really not that much more noticeable over the linear style I zeroed it with. Some powder on my support hand and light, but for all intents and purposes, for me, it's a keeper.

There's a couple of videos up in the BC review thread.

Stickman
14 September 2010, 17:12
http://stickman.rainierarms.com/galleries/Magpul%20V/868W9732-1024-Stick.jpg

Stickman
14 September 2010, 17:14
http://stickman.rainierarms.com/galleries/Magpul%20V/868W9733-1024-Stick.jpg

Mega
14 September 2010, 17:38
Very nice Stick.
What length are the rails and the barrel?

Stickman
19 September 2010, 13:20
The VIS is a 10", and the barrel is a 10.5".

Stickman
19 September 2010, 13:21
http://stickman.rainierarms.com/galleries/Magpul%20V/STCK9953-1024-Stick.jpg


http://stickman.rainierarms.com/galleries/Magpul%20V/UBR%20BFG%20T1%201028%20WEVO.jpg

Keebsley
20 September 2010, 19:59
What are the specs of the rail and barrel Stick? I like the way the PIG is recessed into the rails.

Stickman
20 September 2010, 21:56
DD 12.0 and a 11.5" barrel.

Optimus Prime
23 September 2010, 15:27
For those of you running a similar setup to this, how do the 11.5" neighborhood rifles feel with the UBR stock? It seems a neked lower followed me home today...

Stickman
23 September 2010, 16:55
If you like a heavier weapon, or a back heavy weapon, it feels great. To me, I like the balance rearward on a weapon.

Optimus Prime
23 September 2010, 20:40
I'm thinking of matching it up with a LW BCM 11.5 upper, I think it would help out some of the new female shooters I've worked with to have the center of balance back a bit. I'll have to keep my eye out for a deal on one.

TripleBravo
24 September 2010, 00:44
http://i718.photobucket.com/albums/ww189/wjt1169/Colt%20LMT%20SBR/rifle-on-fde-01.jpg

Stickman
24 September 2010, 09:11
http://stickman.rainierarms.com/galleries/Centurion%20Arms/868W9904-1024-Stick.jpg

MoxyDave
24 September 2010, 16:29
Great photos Stick. I love the FDE and black together. It really breaks up the lines. I also like how there is little or no exposed barrel. Just a cool look ...

TehLlama
25 September 2010, 13:25
I am SO jealous of the GL/SSC...

Stickman
25 September 2010, 14:24
I am SO jealous of the GL/SSC...


I'm not sure if I like it so much because of how few there are, or if its just that good. Maybe its a combination of both.... :P

Stickman
30 September 2010, 11:07
http://stickman.rainierarms.com/galleries/Magpul%20V/868W1443-1024-Stick.jpg

Mega
14 December 2010, 09:32
Bushmaster SBR
The only thing left of the original Bushmaster are the roll marks. [:)]

12.5" barrel
11" LaRue quad rail
Aimpoint Comp M4s optic
Timney 3# trigger
KNS anti-roll pins
Noveske KX3 'flaming pig' flash suppressor
BCM FA Bolt Carrier Group
Magpul BUS
Magpul CTR stock
Magpul MIAD battle grip
Magpul AFG
Magpul BAD lever
Magpul ladder rail covers
Magpul 20 round magazines with ranger plates
Viking Tactical padded sling

http://gallery.me.com/kevinfarrell/100158/DSCN0002_4/web.jpg

http://gallery.me.com/kevinfarrell/100158/DSCN0005_4/web.jpg

http://gallery.me.com/kevinfarrell/100158/DSCN0006_3/web.jpg

GriffonSec
4 January 2011, 08:41
Finally, a couple of decent shots:

http://i624.photobucket.com/albums/tt323/griffonsec/side-2Edited.jpg

http://i624.photobucket.com/albums/tt323/griffonsec/side-1Edited.jpg

MOUNT-N-SLOT
12 January 2011, 12:39
1973 Military Armaments Corporation MAC-10 in .45ACP... 2nd Owner...

http://i998.photobucket.com/albums/af110/mount-n-slot/MAC1045ACP.jpg

Banshee
13 January 2011, 15:54
my lastest Short Barreled Rifle. It is a Sterling built by Wise Lite Arms. I cut the barrel to eight inchs and made a new muzzle cap.

http://img.photobucket.com/albums/v682/allproblemsolved/guns/Sterling/sterlingfolded-1.jpg
http://img.photobucket.com/albums/v682/allproblemsolved/guns/Sterling/sterlingopen-1.jpg
http://img.photobucket.com/albums/v682/allproblemsolved/guns/Sterling/sterlingcap-1.jpg

GriffonSec
22 January 2011, 13:46
Bored experimentation with Photoshop filters......

http://i624.photobucket.com/albums/tt323/griffonsec/sbrsketch.jpg

Cameron
6 February 2011, 13:27
http://farm6.static.flickr.com/5179/5405301130_70c9e8f530_b.jpg

http://farm6.static.flickr.com/5059/5401495883_3ce2393551_b.jpg

Hmac
6 February 2011, 14:11
http://SSEquine.net/ggh.jpg

TripleBravo
6 February 2011, 15:48
http://SSEquine.net/sbr6s.jpg

Great photo and awesome looking build there, Hmac!

Cameron
6 February 2011, 18:07
http://farm6.static.flickr.com/5217/5423199211_386f990617_b.jpghttp://farm6.static.flickr.com/5057/5405316136_c4d9c9391a_b.jpg

Hmac
7 February 2011, 04:03
Great photo and awesome looking build there, Hmac!

Thank you.

Seaslug
9 February 2011, 09:45
Noveske Diplomat [:)]

http://i101.photobucket.com/albums/m49/bsimpson23/DSCN2577.jpg

http://i101.photobucket.com/albums/m49/bsimpson23/DSCN2580.jpg

Cameron
14 February 2011, 09:18
http://farm5.static.flickr.com/4141/5444140230_eb4ae80ea3_b.jpg

Hatter
14 February 2011, 09:34
Finally, a couple of decent shots:

http://i624.photobucket.com/albums/tt323/griffonsec/side-1Edited.jpg

GriffonSec,

I'm looking at a similar build to this and was curious about your choice of comp. Is there a reason you are using the 1.5 instead of the 1.0? I'm thinking my barrel will be a Rainier UM 10.5 and I know this is a fairly volatile length and was wondering if the 1.5 helps ease this in place of a 1.0 BC.

If the performance and life will be about the same I'd just as soon use the shorter 1.0 BC and keep it as short as possible.

Thanks for the insight.

TehLlama
14 February 2011, 22:36
Hatter, iirc Grif's rifle is a 6.8, and that's a BABC on the front of it.

GriffonSec
15 February 2011, 05:38
Hatter - TeLlama has it correct. It is 6.8 and it's a BABC.

I recently built up an 11.5" 5.56 upper with a BCM 410 stainless barrel and Battlecomp 1.0. I halted the project and put it up for sale to help fund my Mega .308 build.

I only put 50 rounds through it on a break in, but found similar performance in the comp. I've yet to have any negative issues with the Battlecomps, great comps that work extremely well. Of interesting note, the 6.8 upper with the BABC looks to be about an inch, inch and a half shorter than the 11.5 with the 1.0. Depending on use, any future rifles I build will include the Battlecomp.

http://i624.photobucket.com/albums/tt323/griffonsec/upper6.jpg

http://i624.photobucket.com/albums/tt323/griffonsec/upper5.jpg

Hatter
15 February 2011, 06:14
That's excellent information!

I like the look of the 11.5" build. It's the configuration I'll be building except it'll be a Rainier billet upper and 10.5 Ultramatch barrel. It should put the Battle Comp right at the end of the DDLite 10.0. I'm just slightly delayed because I've learned my local LE wont sign off so I'm heading down the LLC route. Although, once it's complete it'll make all my future builds and other ATF approved toys much easier.

Thanks for the insight.

kletzenklueffer
15 March 2011, 11:55
Here's a pic of my old Mk12 Mod0. I parted out the upper receiver to buy a motorcycle, which has since been sold to resurrect another SPR upper.
Details of this upper are:
Noveske SPR rifle length gas barrel in PRI FF tube with ARMS 36PEQ rail and long bottom rail with KAC grip, ARMS 22 med rings, PRI front sight, ARMS 40L rear, Nikon 2.5-10 mildot scope, BCM M16 carrier, AAC M4-1000 can.

This rifle was boringly accurate. I regret letting go of the barrel over all.
http://img651.imageshack.us/img651/9165/sprzq4.jpg

New rifle consists of SOPMOD stock, Noveske lower, Noveske intermediate GS SPR barrel, same can, MI 12" T FF tube (can't find a KAC FF rifle tube right now), ARMS 22 high rings with Nikon scope. It's shot well to this point, and it still in break in (<60 rounds). Hopefully it'll match the first one

Seaslug
19 March 2011, 19:34
Started with a complete Daniel Defense Mk18 upper, and went a little crazy from there... [:D]

http://i101.photobucket.com/albums/m49/bsimpson23/DSCN2809.jpg

http://i101.photobucket.com/albums/m49/bsimpson23/DSCN2817.jpg

http://i101.photobucket.com/albums/m49/bsimpson23/DSCN2814.jpg

lmtrocks
2 April 2011, 21:59
FINALLY:

10.5" 7.62x39
http://i320.photobucket.com/albums/nn346/gunguyshots/SBRreduced.jpg

12" 6.8SPCII---sold but not forgotten
http://i320.photobucket.com/albums/nn346/gunguyshots/68SBRreduced.jpg

Suppressed at Gun Warehouse and Range
http://i320.photobucket.com/albums/nn346/gunguyshots/762x39suppressed.jpg

Specialized Armament
8 April 2011, 18:08
One of our many projects, and you thought all we did were AR-15's....

http://i808.photobucket.com/albums/zz2/Specialized_Armament/HK%20MP5SD/th_WhiteBox015.jpg (http://s808.photobucket.com/albums/zz2/Specialized_Armament/HK%20MP5SD/?action=view&current=WhiteBox015.jpg)

http://i808.photobucket.com/albums/zz2/Specialized_Armament/HK%20MP5SD/th_WhiteBox014.jpg (http://s808.photobucket.com/albums/zz2/Specialized_Armament/HK%20MP5SD/?action=view&current=WhiteBox014.jpg)

http://i808.photobucket.com/albums/zz2/Specialized_Armament/HK%20MP5SD/th_WhiteBox013.jpg (http://s808.photobucket.com/albums/zz2/Specialized_Armament/HK%20MP5SD/?action=view&current=WhiteBox013.jpg)

http://i808.photobucket.com/albums/zz2/Specialized_Armament/HK%20MP5SD/th_WhiteBox012.jpg (http://s808.photobucket.com/albums/zz2/Specialized_Armament/HK%20MP5SD/?action=view&current=WhiteBox012.jpg)

SGB
9 April 2011, 16:15
Nothing fancy, 11.5"

http://oi52.tinypic.com/21dr7lj.jpg

TripleBravo
11 April 2011, 16:07
http://i718.photobucket.com/albums/ww189/wjt1169/Krink%20Duracoated/krinkleft.jpg

Hatter
23 April 2011, 20:50
POF Lower with Magpul goodies and Rock River 2 Stage lower kit.
UBR Stock and KNS pins.

Upper is Rainier Ultramatch 10.5 with BattleComp 2.0 and DD Lite 10.0 rail. Rainier Thunderbolt BCG

http://i1143.photobucket.com/albums/n638/MdHatter/SBR/DSCN0293.jpg
http://i1143.photobucket.com/albums/n638/MdHatter/SBR/DSCN0296.jpg
http://i1143.photobucket.com/albums/n638/MdHatter/SBR/DSCN0300.jpg

Hmac
24 April 2011, 06:28
This was going to be a lightweight build, but I lost focus a little. It came in at 6 lb 5 oz, but handles really well. I do really like the CTR stock.

http://SSEquine.net/sbeen4s.jpg

m249saw
29 April 2011, 18:23
http://i5.photobucket.com/albums/y158/m249saw/sbr1.jpg

My Mk18 Mod1 ish SBR.

DD 10.3" Barrel
Vltor MUR upper
BCM BCG with Gunfighter CH
KAC NT4-QDSS flash hider
Troy BUIS
Aimpoint Micro in Larue Mount
Geissele SD-3G trigger (love it!!!!!!!!)

Not pictured: KAC NT4-QDSS can sitting at my dealer.

TripleBravo
29 April 2011, 19:53
NICE m249Saw!

m249saw
30 April 2011, 08:00
Thanks, its my 3rd or 4th version, lol. Next up Im thinking a 14.5" Centurion middy.

TripleBravo
30 April 2011, 12:01
Thanks, its my 3rd or 4th version, lol. Next up Im thinking a 14.5" Centurion middy.

Great barrels, and their new rails look great too...that should be sweet.

Tactical Ninja
18 May 2011, 20:19
http://img641.imageshack.us/img641/3350/arsbr4.jpg

http://img402.imageshack.us/img402/7131/arsbr3.jpg

Latest Project. Have a new lower just waiting on the CTR stock kit from Rainier Arms.

Cameron
5 June 2011, 11:27
http://farm4.static.flickr.com/3582/5805616620_1f021eb0ef_b.jpg

http://farm3.static.flickr.com/2193/5805102597_e1d833c290_b.jpg

Jerry R
5 June 2011, 17:30
Just a few items to add to the thread.

AAC Ti-Rant in .45 ACP - Storm Lake Barrel in Para Ordnance P14-45. NP3 Frame and Black RoGuard Slide.

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/IMG_1623P14-45300PPISized1024.jpg

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/IMG_1625P14-45W-AACOnStamp300PPISized1024.jpg

AAC Prodigy 22LR Multi-Host. Tactical Solutions Pac-Lite upper on Ruger 22-45 Lower with AAC threaded adapter on Walther P-22

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/IMG_1626NFA22LRsonStamp300PPISized1024.jpg

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/IMG_1647P22withcan300PPISized1024.jpg

LWRCi M6-A3 in 6.8 SPC with a 10.5" barrel. AAC Break-Out Adapter, new TLR-1S (135 Lumen I believe), LaRue Rail clips - I have ham sized hands, but really like thinner rail covers. EOTech EXPS3-0 with 3X magnifier - did not care about NV, but needed side switches with the magnifier. FUG with non-coiled tape switch. I love this rifle.

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/IMG_162968SBRonStamp300PPISized1024.jpg

Oh, and it has an AAC M4-2000 Mod-8 can.

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/IMG_1633SRBW-Can300PPISized1024.jpg

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/IMG_1642SBRmuzzle2-can300PPISized1024.jpg

I like it so much I also got a matching 5.56 upper for it. It has an AAC M4-2000 Mod-8 also.

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/IMG_1637SBRbothuppers300PPISized1024.jpg

I really like the EOTech setup on this SBR. BCM Gunfighter charging handle with large latch.

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/IMG_1644SBRLeftSideReceivers300PPISized1024.jpg

Quib
5 June 2011, 17:34
Jerry,

Details on the TLR-1 filter please?

Jerry R
5 June 2011, 17:47
Quib - it is an IR filter (at least that is the claim - looks like just a red filter to me), that flips open. The Break-out adapter really dirties the lens on the light. I wanted a cover that protected the light and flipped open. When I was looking, the IR was the only one anybody had in stock. Same price as the clear, so I bought a pair, one for each light. They work very well in the house with all lights off late at night. Flip it open and the little TLR will blind you. It turned out to be a pretty nice arrangement, by accident. When the SBR is sitting in the corner for HD, the can is on, and the cover is off.

The muzzle break / adapter is REALLY loud on the 10.5" barrel.

Quib
5 June 2011, 17:59
Thank you Sir. Do you have vendor info?

Jerry R
5 June 2011, 18:07
Sorry - I had to go to my Excel sheet and look it up.

Botach Tactical - http://www.botachtactical.com/sttlrfi.html

I verified the link - looks like they are showing IR and Red - now I'm not sure which one was in stock when I ordered. I ordered the TLR lights from them as well.

The TLR-1S / tape switch / lens cover came to $170.34 before shipping.

Quib
5 June 2011, 18:19
Thanks again. I'll have to look into those. Up to this point I did not know a TLR specific lens existed. I had to improvise and make my own.

Jerry R
5 June 2011, 18:21
Glad to help - "I serve to live". [:D]

Quiet-Matt
6 June 2011, 10:41
My First SBR...
https://lh4.googleusercontent.com/-Z_TWS5w03Oo/TezuBSNSY6I/AAAAAAAAIPo/MDRWfax9taA/s720/DSC02210.JPG

Hatter
6 June 2011, 11:23
Quiet-Matt,

What's the barrel length on that little guy? How's the Battle Comp performance?

I have the 2.0 on my 10.5 Rainier upper and I'm wondering if I'll need the Noveske KX3 for the blast to go forward. Once I get my stamp I'll know for sure but until then what are your thoughts?

Jerry R
6 June 2011, 13:09
Quiet-Matt - nice looking stick. A few details, if you don't mind.

Quiet-Matt
6 June 2011, 18:10
Just got the stamp today, so that little guy will have it's debut tomorrow. I'll give you some feedback on the Battle Comp. She's a mutt collection of parts from lots of sources...
Daniel Defense - 11.5" CFH lightweight barrel
Battle Comp - Muzzle Device
Vltor - light mount and stock
Surefire - G2 led
Bravo Company - Upper reciever, gunfighter CH, Reciever extension, H2 buffer
LMT - Auto BCG
Larue - LT660 mount
Aimpoint - Micro
IWC - micro swivel socket on other side of handguard
MagPul - grip, handguard, vert grip, modified endplate
Troy - rear sight
CMT - lpk
RRA - lower reciever (picked the best of my stash to SBR)

Update (post range trip):
As the gun is set-up it functions perfectly. Tested with M193, Rem 55gr, PMC 55gr, Fed. 55gr, Wolf 62gr, and Wolf 55gr. Consistant ejection pattern at 2-3:00 and bolt lock on last shot for every mag. The BattleComp absolutely as advertised, sights stayed on target and it was incredible how fast you could dump a mag accurately. Instead of fighting the gun to stay on target, all I had to do was work the trigger. Awesome! The precussion blast on the little 11.5" bbl was something new for me though. After a couple of magazines you get used to it and it's a non-issue.

GriffonSec
8 June 2011, 20:38
Quib - it is an IR filter (at least that is the claim - looks like just a red filter to me), that flips open. The Break-out adapter really dirties the lens on the light. I wanted a cover that protected the light and flipped open. When I was looking, the IR was the only one anybody had in stock. Same price as the clear, so I bought a pair, one for each light. They work very well in the house with all lights off late at night. Flip it open and the little TLR will blind you. It turned out to be a pretty nice arrangement, by accident. When the SBR is sitting in the corner for HD, the can is on, and the cover is off.

The muzzle break / adapter is REALLY loud on the 10.5" barrel.

A little loud?? It knocked half full water bottles off the bench!

Nice pics, finally! Be sure to bring the .45 in July this time please....

Jerry R
9 June 2011, 20:26
Be sure to bring the .45 in July this time please....

Ti-Rant stamp just cleared. I will definitely bring it with me.

N.Franklin
9 July 2011, 15:30
First SBR and can...cant wait to hang the destructive device underneath it.

http://img.photobucket.com/albums/v669/nf9648/Guns/WP_000108.jpg
http://img.photobucket.com/albums/v669/nf9648/Guns/WP_000109.jpg

N.Franklin
9 July 2011, 22:26
14.5" SBR w/KAC QDSS-NT4.

http://img.photobucket.com/albums/v669/nf9648/Guns/WP_000108.jpg
http://img.photobucket.com/albums/v669/nf9648/Guns/WP_000109.jpg

Jason121580
11 July 2011, 10:18
10.5'' Seekins Precision SBR

http://i1222.photobucket.com/albums/dd490/jason121580/SBR30.jpg?t=1310254194

Jason121580
11 July 2011, 10:23
http://i1222.photobucket.com/albums/dd490/jason121580/SBR31.jpg?t=1310252150

TripleBravo
13 July 2011, 06:16
I've said it elsewhere, and I'll say it here...that's a great look'n set up, Jason!

GriffonSec
17 July 2011, 13:32
Jason, what upper is that? Looks great! I gave up on my Seekins SBR build after waiting and waiting on their upper, that makes me wish I'd kept it now....

Nice job....[wow]

MOUNT-N-SLOT
17 July 2011, 22:11
http://i998.photobucket.com/albums/af110/mount-n-slot/105intheWeedsIMG_9864.jpg

Cameron
27 July 2011, 07:31
http://farm7.static.flickr.com/6027/5974731305_7bd7b3d277_b.jpg

http://farm7.static.flickr.com/6017/5974789417_31e519118a_b.jpg

lmtrocks
2 August 2011, 00:23
7.5" 22 SBR upper
CMMG conversion
Black Dog Machine magazine
YHM QD Phantom Brake
DSA M4 upper
Form 1 LMT SBR w/Vltor modstock

http://i320.photobucket.com/albums/nn346/gunguyshots/Upper%20Builds/P7290001.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/Upper%20Builds/P7190004.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/Upper%20Builds/P7190003.jpg

12" Wilson Combat 6.8
http://i320.photobucket.com/albums/nn346/gunguyshots/Upper%20Builds/68SBRreduced.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P4030003-1.jpg

10.5" 7.62x39
http://i320.photobucket.com/albums/nn346/gunguyshots/P7040004.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P7140005.jpg
http://i320.photobucket.com/albums/nn346/gunguyshots/P7140006.jpg

Hatter
26 August 2011, 18:05
Finally had a chance to grab a few pictures. Plain and simple 10.5" SBR

POF416 lower
RRA LPK
KNS anti-rot pins
Magpul UBR, AFG, MIAD, BAD, MBUS GenII, XTM panels
Rainier UM 10.5 Upper
Battle Comp

http://i1143.photobucket.com/albums/n638/MdHatter/SBR/DSCN0605.jpg
http://i1143.photobucket.com/albums/n638/MdHatter/SBR/DSCN0603.jpg
http://i1143.photobucket.com/albums/n638/MdHatter/SBR/DSCN0596.jpg

goteron
26 August 2011, 19:58
http://i1197.photobucket.com/albums/aa436/TacticalElitist/2-1.jpg

http://i1197.photobucket.com/albums/aa436/TacticalElitist/6PoundCarbine.jpg

lmtrocks
10 September 2011, 11:03
Updated:
Put the Daniel Defense MFR on my 10.5" upper
Added a Bulldog PS90 case
and baseball gloves...
http://i320.photobucket.com/albums/nn346/gunguyshots/P9060001-1.jpg

Quiet-Matt
10 September 2011, 11:59
https://lh3.googleusercontent.com/-kDHlI3FIwhs/TmuzV-W03WI/AAAAAAAAIz8/1csjsD-369o/s800/DSC02411.JPG

TripleBravo
7 October 2011, 14:57
http://i718.photobucket.com/albums/ww189/wjt1169/Seekins%20Precision/B3-oncase-different-01-1024.jpg

BravoHotel
7 October 2011, 18:35
Nice rig there, Triple. Really diggin' the super clean and uncluttered lines. Is that a Seekins upper as well?

TripleBravo
8 October 2011, 00:31
Nice rig there, Triple. Really diggin' the super clean and uncluttered lines. Is that a Seekins upper as well?

Yep. Seekins upper and BAR (rail). It's a 300 blackout prototype with an AAC 762-SDN-6.

Quiet-Matt
8 October 2011, 13:26
https://lh4.googleusercontent.com/-x-KC1LJySpc/TpCc2MMjupI/AAAAAAAAJAI/dguB2jKsteY/s1024/DSC02551.JPG

Jason121580
20 October 2011, 15:46
http://i1222.photobucket.com/albums/dd490/jason121580/bio4.jpg?t=1319149902

Palmetto State Armory
21 October 2011, 08:34
http://farm7.static.flickr.com/6092/6266239405_3219263a98_b.jpg

http://farm7.static.flickr.com/6095/6266767274_069089cc04_b.jpg

Jason121580
21 October 2011, 15:31
Spikes Tactical Biohazard SBR


http://i1222.photobucket.com/albums/dd490/jason121580/bio7.jpg?t=1319148297

lmtrocks
11 November 2011, 00:00
http://i320.photobucket.com/albums/nn346/gunguyshots/PA300001-1.jpg

FastIndy
20 November 2011, 14:41
http://img.photobucket.com/albums/v87/FastIndy/AR/DSC_5644-MED.jpg

http://img.photobucket.com/albums/v87/FastIndy/AR/DSC_5645968x322.jpg

http://img.photobucket.com/albums/v87/FastIndy/AR/DSC_56501024x680.jpg

micah197
1 December 2011, 18:10
http://i1001.photobucket.com/albums/af140/micah197/Untitled-1.jpg

Nothing fancy. MP5 and Mossberg 590 14"

Cameron
6 December 2011, 13:49
http://farm8.staticflickr.com/7164/6467920755_0d98b1937f_b.jpg

GriffonSec
25 December 2011, 12:12
Wishing everyone a Silent and Hole-E night.........

from some Christmas shooting this weekend...

http://i624.photobucket.com/albums/tt323/griffonsec/silentnight1.jpg

lmtrocks
25 December 2011, 12:46
Nicely done GS. Nicely done.

m249saw
20 January 2012, 17:09
http://i5.photobucket.com/albums/y158/m249saw/sbr1.jpg

http://i5.photobucket.com/albums/y158/m249saw/sbr2.jpg

http://i5.photobucket.com/albums/y158/m249saw/sbr3.jpg

Upper
Vltor Carbine length VIS
Noveske 11.5 SS Switchblock barrel
AAC MITER mount
BCM BCG
Gunfighter CH
KAC Front and rear micro BUS
H1 in a KAC mount
X300 light
Larue FUG
Larue index clips
AAC SPR/M4 suppressor

Lower:
Mega billet lower
Geissele SD3G trigger
BAD-ASS selector
Vltor A5 buffer system
Magpul STR
Magpul MOE-K

Jason121580
27 January 2012, 08:50
Burnt Bronze Cerakote

http://i1222.photobucket.com/albums/dd490/jason121580/BurntBronzeSBR036.jpg?t=1327595890

TripleBravo
27 January 2012, 12:59
Love that Seekins!

Fontaine
27 January 2012, 19:13
http://www.pbase.com/image/140726674.jpg

Galilman
12 February 2012, 08:46
This is one of my SBR's. Aero Precision Recievers.

http://http://i181.photobucket.com/albums/x68/galil762/DSC_0085.jpg

Galilman
12 February 2012, 09:13
Another shot of my Aero Precision SBR. [:)]

http://i181.photobucket.com/albums/x68/galil762/299255_2532119186012_1344483324_2919912_673464377_ n.jpg

lmtrocks
25 February 2012, 21:52
http://farm8.staticflickr.com/7200/6783298284_3e1dfaf0f8_b.jpg

GriffonSec
27 February 2012, 10:01
LMT ~ That's beautiful! I dig the old school SBR look.

Not quite NFA (pinned Brick moderator), but I do wish - XM177 clone I dd a while back:

http://i624.photobucket.com/albums/tt323/griffonsec/xmcloneweb.jpg

lmtrocks
28 February 2012, 17:28
Thank you Griff [:D]

I just got done building another 10.5" upper tonight. There's a 604 upper I picked up a couple weeks ago and retired a barrel off one of my SBR uppers. A hodgepodge of parts came together. The funny part is I've been wondering how this would look with a set of MOE carbines on it, and there you go showing off that gun with them on it. I am going to have to pick up a set now because of the qualification of the look. Eventually tho, I will retrofit a set of triangles onto this upper, but your rifle looks great also.

TripleBravo
28 February 2012, 21:30
Here's a 12.5 inch barrel set up.

http://i718.photobucket.com/albums/ww189/wjt1169/Spikes%2012%20inch%20SBR/Spikes-SBR01-1024-B3.jpg

TangoSauce
28 February 2012, 23:06
Had a couple of employees here to shoot at the house today, one took this pic of my completed 6.8 SBR.

http://i624.photobucket.com/albums/tt323/griffonsec/lifeliberty.jpg

Which muzzle device is this? thnx

TangoSauce
28 February 2012, 23:26
double tap

TangoSauce
28 February 2012, 23:27
Burnt Bronze Cerakote

http://i1222.photobucket.com/albums/dd490/jason121580/BurntBronzeSBR036.jpg?t=1327595890

That burnt bronze looks great!

GriffonSec
29 February 2012, 07:33
LMT - I could never get to where I liked the round/tapered standard handguard, but modified shorty triangles are awesome! Be sure to throw those pics up!

TangeSauce - muzzle device is a BattleComp, BABC for the 6.8/7.62.

TripleBravo
29 February 2012, 08:57
Which muzzle device is this? thnx

Battle Comp BABC.

MoxyDave
29 February 2012, 10:35
Here's a 12.5 inch barrel set up.

http://i718.photobucket.com/albums/ww189/wjt1169/Spikes%2012%20inch%20SBR/Spikes-SBR01-1024-B3.jpg

Badass setup. Very similar to one of my own. Which flashlight is that?

neo9710
29 February 2012, 15:06
Badass setup. Very similar to one of my own. Which flashlight is that?

I believe its the new Inforce WML

MoxyDave
1 March 2012, 11:55
Nice looking light. Here is a video review:


http://www.youtube.com/watch?v=_3vdFQuIEIo

Tactical Ninja
3 March 2012, 16:52
Have a Inforce WML with IR switch that should be here Monday. It arrived.

http://img543.imageshack.us/img543/2221/inforcewml.jpg

lmtrocks
30 March 2012, 21:11
http://farm8.staticflickr.com/7040/6884924702_928de4f1f2_b.jpg
http://farm8.staticflickr.com/7051/6884892918_cd0f040e24_b.jpg

Cameron
3 April 2012, 18:30
http://farm8.staticflickr.com/7164/6467920755_0d98b1937f_b.jpg

Jason121580
18 April 2012, 12:43
http://i1222.photobucket.com/albums/dd490/jason121580/biosbr.jpg?t=1334426098

http://i1222.photobucket.com/albums/dd490/jason121580/bbsbr2.jpg?t=1334425949

Banshee
22 April 2012, 16:51
My MP5 clone built on a Turner Fabrications pistol

http://img.photobucket.com/albums/v682/allproblemsolved/guns/MP5/MP5SBR.jpg

SuicideMyk
25 April 2012, 12:15
http://i1222.photobucket.com/albums/dd490/jason121580/bbsbr2.jpg?t=1334425949

The Burnt Bronze looks awesome, i just ordered the Seekins lower and upper the other day... what barrel you have on there with the FS ?

Jason121580
26 April 2012, 18:03
The Burnt Bronze looks awesome, i just ordered the Seekins lower and upper the other day... what barrel you have on there with the FS ?

Thanks, The barrel is a 10.5'' Noveske N4 light .

Cameron
27 April 2012, 09:34
http://farm6.staticflickr.com/5239/6968588732_2481418ddb_b.jpg

SuicideMyk
27 April 2012, 20:38
Just got my upper and lower today

This is my first ever AR-15 build. After months of researching and looking at thousands of AR's I decided I really liked Seekins and this is where I want to start off, it's gonna be fun [8D]

So far the only parts I bought is the Timney single stage skeletonized 3lb trigger, Battle Arms BADD ASS Safety Selector and Stag Arms LPK... I'm still looking at stocks and grips, probably gonna go with Mag Pul to finish off the lower...

The Upper I'm going to get the Seekins Float Quad Rail with the Noveske 16" 5.56 barrel..


http://i1075.photobucket.com/albums/w427/Suicidemyk/SM1.jpg

http://i1075.photobucket.com/albums/w427/Suicidemyk/SM2.jpg

lmtrocks
29 April 2012, 23:23
Just got my upper and lower today

This is my first ever AR-15 build. After months of researching and looking at thousands of AR's I decided I really liked Seekins and this is where I want to start off, it's gonna be fun [8D]

So far the only parts I bought is the Timney single stage skeletonized 3lb trigger, Battle Arms BADD ASS Safety Selector and Stag Arms LPK... I'm still looking at stocks and grips, probably gonna go with Mag Pul to finish off the lower...

The Upper I'm going to get the Seekins Float Quad Rail with the Noveske 16" 5.56 barrel..


http://i1075.photobucket.com/albums/w427/Suicidemyk/SM1.jpg

http://i1075.photobucket.com/albums/w427/Suicidemyk/SM2.jpg

Nice start, but a 16" barreled weapon belongs in another thread [:D]

You should consider a Noveske 10.5" barrel or something similar for this thread, but 16 is too much my friend.

Cameron
7 May 2012, 19:14
http://farm8.staticflickr.com/7184/7146484569_fe2c5319fa_b.jpg

Cameron
13 May 2012, 23:04
http://farm8.staticflickr.com/7237/7193535380_c933a99174_b.jpg

Cameron
13 May 2012, 23:04
http://farm9.staticflickr.com/8163/7211369570_3156afb688_b.jpg

LMT 10.5"

lmtrocks
12 June 2012, 22:25
http://farm8.staticflickr.com/7082/7179411417_5111cc0ca9_b.jpg

Cameron
18 June 2012, 06:57
BCM 11.5"

http://farm9.staticflickr.com/8164/7396846252_05156539bf_b.jpg

http://farm8.staticflickr.com/7222/7392256560_e7e2d4ca25_b.jpg

lmtrocks
19 June 2012, 22:13
http://farm8.staticflickr.com/7100/7405754880_746aa0012f_b.jpg

Cameron
22 June 2012, 14:39
LMT 10.5"

http://farm6.staticflickr.com/5323/7404872408_448140c9db_b.jpg

http://farm6.staticflickr.com/5315/7404826886_f383383c14_b.jpg

Cameron
24 June 2012, 18:14
LMT 10.5"

http://farm9.staticflickr.com/8143/7193366952_af52295fcf_b.jpg

http://farm9.staticflickr.com/8013/7205791414_8651d97dde_b.jpg

FastIndy
24 June 2012, 21:00
http://img.photobucket.com/albums/v87/FastIndy/HK/MP5kFullAuto.jpg

http://img.photobucket.com/albums/v87/FastIndy/HK/DSC_62511280x850.jpg

lmtrocks
24 June 2012, 21:53
Hows it feel spending $6 in 2 seconds Indy?

Pic thread
http://farm8.staticflickr.com/7263/7437741438_159a0bafe1_b.jpg

Quiet-Matt
26 June 2012, 17:22
https://lh4.googleusercontent.com/-A2dJEoDgH_E/T-XhLhBMSxI/AAAAAAAAJnY/-X_XJZJzRcw/s816/20120623_112633.jpg?gl=US

Cameron
27 June 2012, 07:16
LMT 10.5"

http://farm8.staticflickr.com/7278/7435336888_3052cc3303_b.jpg

http://farm8.staticflickr.com/7118/7435294634_6b0a5aacaa_b.jpg

Cameron
2 July 2012, 15:14
http://farm9.staticflickr.com/8018/7466955396_e941742349_b.jpg

Cameron
3 July 2012, 11:17
http://farm9.staticflickr.com/8013/7467651564_641c1055d2_b.jpg

lmtrocks
4 July 2012, 07:44
Cameron--
What suppressors are you running on your LMT and BCM?

I picked up some carbine length triangle handguards from PK Firearms last week and got them installed yesterday. 604 receiver, delta pack, YHM 762 QD FH, and the 762 Titanium can.
This setup suppresses very well. Threads were cut at a local AR MFG for $40.
http://farm9.staticflickr.com/8005/7499356532_7ab25f1c7c_b.jpg
http://farm8.staticflickr.com/7132/7499356872_38d18d3153_b.jpg
http://farm8.staticflickr.com/7259/7499354704_f9984f18a4_b.jpg

Cameron
5 July 2012, 14:21
http://farm9.staticflickr.com/8143/7510506884_e8cc698319_b.jpg

lmtrocks
10 July 2012, 22:37
http://farm8.staticflickr.com/7264/7547827100_12c4c06c01_b.jpg (http://farm8.staticflickr.com/7264/7547827100_6074f1c37c_h.jpg)

8" Noveske 300 BLK on a LMT receiver, Troy 7.2 VTAC

Click for fullsize

Addison33
29 January 2013, 02:42
This is pretty nice i like this and amazing photos this is moslty these are all phtoos showing the professional photogrpaher's hand behind to these photos and i like this type of photos and also in searchign for this thanks for this pretty good photo gallery...

GriffonSec
6 February 2013, 08:06
http://i624.photobucket.com/albums/tt323/griffonsec/sbr6_zpsbedf32c8.jpg

LanceCriminal
9 February 2013, 12:19
AAC SPR/M4 on a MK 12 Mod 0 clone

http://img560.imageshack.us/img560/9523/dscn0271e.jpg (http://imageshack.us/photo/my-images/560/dscn0271e.jpg/)

http://img203.imageshack.us/img203/7320/sprwithsprm4off.jpg (http://imageshack.us/photo/my-images/203/sprwithsprm4off.jpg/)

And with my post-SH SBR, Stamp received, engraving done, but no parts to finish it.

http://img802.imageshack.us/img802/8669/dscn0274b.jpg (http://imageshack.us/photo/my-images/802/dscn0274b.jpg/)

knedrgr
12 February 2013, 19:18
5.56 AR15
10.5" barrel w/ a 9" rail.

http://i590.photobucket.com/albums/ss343/urbanguerillaclothing/UGC_AR15-SBR_1.jpg

http://i590.photobucket.com/albums/ss343/urbanguerillaclothing/UGC_AR15-SBR_2.jpg

AZSBR
9 March 2013, 20:47
http://www.flickr.com/photos/93894207@N05/8544196962/in/photostream

knedrgr
14 March 2013, 19:18
http://i590.photobucket.com/albums/ss343/urbanguerillaclothing/UGC_AR15_SBR-on-ammo.jpg

Jerry R
12 June 2013, 15:32
Paid Bullseye to order it over 10 months ago. Took three months to "receive" the suppressor at my dealer. Another seven months for this last stamp to clear, but ................... finally !!

Less than half the length of my TiRant - less than half the weight of the TiRant - less than half the cost of the Ti-Rant. And rated fairly close in DB Reduction. I will do a "side by side" video to see how close they really are. I have a 5.5" threaded barrel for my Para, so I could fire from each alternating. Should be a reasonable example for comparison.

Mounted on SIG TAC-OPS TB

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/Thompson-Machine%20Poseidon%2045%20Suppressor/IMG_2266PoseidonFramed1024_zpsdcbf839b.jpg (http://s70.photobucket.com/user/pdogkilr/media/Firearms/NFA%20Pictures/Thompson-Machine%20Poseidon%2045%20Suppressor/IMG_2266PoseidonFramed1024_zpsdcbf839b.jpg.html)

Dressed and ready for the nightstand. I bought it primarily for HD when things go bump in the night. Enough suppression to not kill my hearing, and no flash to blind me in the dark.

http://i70.photobucket.com/albums/i106/pdogkilr/Firearms/NFA%20Pictures/Thompson-Machine%20Poseidon%2045%20Suppressor/IMG_2286PoseidonLightKnifeFramed_zps2f282f85.jpg (http://s70.photobucket.com/user/pdogkilr/media/Firearms/NFA%20Pictures/Thompson-Machine%20Poseidon%2045%20Suppressor/IMG_2286PoseidonLightKnifeFramed_zps2f282f85.jpg.h tml)

I know it is a "wet" can and I will do most of the practice shooting with it wet. I will shoot a little with it dry to see if the POI varies. And it will be dry on the nightstand (I think).

Edit: Sorry guys, just noticed the last pic - forgot to put an empty magazine in it and safe it with the hammer back [bash]

Computalotapus
12 June 2013, 16:16
Seeing this and the Para Black Ops my dad just bought makes me want to get one. I just don't have 1k+ sitting around to drop on a pistol. But man do I want one

Jerry R
12 June 2013, 16:33
Understood. But shop around. I got the Tac-Ops new for around $900 out the door. The Poseidon was $424 OTD. I think it is a good combo.

UWone77
13 June 2013, 01:09
Looking forward to your review on the can. No idea how well it suppresses, but it's all sorts of good looking.

MoxyDave
13 June 2013, 10:47
Nice setup. Looking forward to your review. I have a can on my HD gun for the same reason: protect my hearing!

Jerry R
13 June 2013, 19:04
Thanks Guys. I have received the wipe material and bought the recommended wire pulling gel. I hope to get the video portion of a review done at RBGC next Wednesday. I will post as quickly as I "can" ;)

LanceCriminal
27 August 2013, 19:34
There's some NFA going on in here...


http://farm8.staticflickr.com/7363/9584904563_2063c01530_b.jpg (http://www.flickr.com/photos/100565977@N03/9584904563/)[/QUOTE]

AceTacArms
1 September 2013, 20:02
Here is one of my SBR builds.

http://x.co/1xZj2

knedrgr
26 September 2013, 21:18
http://i590.photobucket.com/albums/ss343/urbanguerillaclothing/UGC_AR15-SBR_22LR.jpg