View Full Version : Looking for a barrel
Big_Tom
23 July 2018, 23:07
I'm trying to find a 14.5in middy with FSB installed. Trying to stay around $200. If anyone can point me in the right direction it would be appreciated.
Thanks
Tom
Sent from my SM-N920P using Tapatalk
UWone77
24 July 2018, 00:52
Any number of places can properly pin a FSB for you.
14.5 middies with a FSB aren't too common.
Aero has a 16 mid
https://aeroprecisionusa.com/556-16-fsb-mid-cmv-barrel.html
Big_Tom
24 July 2018, 01:58
Any number of places can properly pin a FSB for you.
14.5 middies with a FSB aren't too common.
Aero has a 16 mid
https://aeroprecisionusa.com/556-16-fsb-mid-cmv-barrel.htmlYeah that's what I'm leaning towards. I came across the16" AP and BA has one as well available at Aim Surplus for $180.
Everywhere I find a 14.5 middy they are sold out.
I was thinking at one time BA had an option to add a FSB for $60 when buying a barrel.
Sent from my SM-N920P using Tapatalk
mustangfreek
24 July 2018, 02:45
BA still offers the fsb option , here’s their 14.7 LW barrel in stock
https://ballisticadvantage.com/14-7-inch-556-pencil-mid-length-cmv-modern-barrel.html
PJD642
24 July 2018, 08:14
TNTE has a few 14.5" mid lengths with FSBs (https://www.tntesales.com/14-5-barrels/).
Faxon also has a 14.5" GUNNER profile (http://faxonfirearms.com/14-5-gunner-5-56-nato-mid-length-4150-qpq/) that I had my local shop pin a FSB on. Both links have the barrels in stock.
ETA: fix links
Former11B
24 July 2018, 08:42
I’ve seen some problems with BA barrels recently, accuracy issues as well as bad batches. Kept me out of a group buy 3-4 months ago
Big_Tom
24 July 2018, 12:12
Well after some more thinking I'm goin with a 16in. I want to be able to run a suppressor with it one day and don't want to have to be stuck with a certain brand. Especially when I really haven't decided what brand suppressor I'm getting.
Sent from my SM-N920P using Tapatalk
UWone77
25 July 2018, 10:00
I lean towards 16's more than 14.5' nowadays. Easier to swap muzzle devices unless you decide to ultimately run a 14.5 on an SBR lower. Either way the 1.5" won't make much of a difference.
rxer311
25 July 2018, 14:18
Noveske has one.
UWone77
25 July 2018, 14:25
Noveske has one.
But not for $200
rxer311
25 July 2018, 14:43
Sorry... Read right over that part. Try ballistic advantage. If you buy directly from them you can get a pinned fsb.
rxer311
25 July 2018, 14:47
Just checked the BA web site and they don't have a 14.5 in stock. They do have a 14.7 pencil profile with the option of a fsb. It would be right at $200.
Big_Tom
25 July 2018, 16:39
I found a complete upper with bcg and ch for 380. It's an AP. And use I may go that route and tear it down re use parts where I can.
Sent from my SM-N920P using Tapatalk
Big_Tom
4 August 2018, 00:47
Ok just looked at emails and Aim has an AP assembled upper minus bcg/ch for 299 free ship. Or I can get a barrel with fsb for 180.
The one with bcg/ch that I mentioned before is sold out. So I'm thinking the assembled upper is more cost efficient as I would then just replace the Magpul handguard.
https://www.aimsurplus.com/product.aspx?item=XAPAR502505M65
Sent from my SM-N920P using Tapatalk
Big_Tom
7 August 2018, 16:40
Ok so scratched plans A through E and skip a few and landed up at Plan W.
Found a guy selling an upper without BCG/CH that has a BCM barrel with FSB installed and a Centurion Arms C4 mid cutout rail. Snatched it up for $425.
This works out best cause that's the rail I was going to get for the upper. And comes with troy rear sight as well.
Sent from my SM-N920P using Tapatalk
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.