PDA

View Full Version : Magpul Industries Corp Bipod Now Shipping



UWone77
12 August 2018, 17:01
https://www.magpul.com/featured/bipod

Product Details
Magpul® Bipod

The Magpul Bipod (https://www.magpul.com/featured/bipod) for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.



Durable & Lightweight

The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions. Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.



Innovative, Adjustable, & Easy to Use

Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.



Smooth & Unobtrusive

From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.



Functional Feet

The Magpul Bipod (https://www.magpul.com/featured/bipod)has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.

The Magpul Bipod (https://www.magpul.com/featured/bipod) is available in BLK or FDE colors.

Made in U.S.A.


5708
5709
5710

FortTom
12 August 2018, 17:05
Oooops! No KeyMod option....[wow]

UWone77
12 August 2018, 17:06
Oooops! No KeyMod option....[wow]

Well duh, Magpul has never supported KeyMod [BD]

FortTom
12 August 2018, 17:11
Well duh, Magpul has never supported KeyMod [BD] Could offer an option to mount to rail section. Where's that damn Magpul worshiper you kicked off of here a while back....we need him to weigh in on this....

UWone77
12 August 2018, 17:25
Could offer an option to mount to rail section. Where's that damn Magpul worshiper you kicked off of here a while back....we need him to weigh in on this....

One of the options is a pic rail version.

I ended up ordering a pic rail and an mlok one.

FortTom
12 August 2018, 20:55
One of the options is a pic rail version.

I ended up ordering a pic rail and an mlok one.

Great! I'll wait to see if your's breaks, before I buy one...[:D]

mustangfreek
12 August 2018, 23:57
I’d like to try one..the Harris works but this is not much more

nCarnage
13 August 2018, 13:01
Could offer an option to mount to rail section. Where's that damn Magpul worshiper you kicked off of here a while back....we need him to weigh in on this....

They do offer one for picatinny rail.


Sent from my iPhone using Tapatalk

UWone77
20 August 2018, 09:51
https://youtu.be/B9xAykkdI5M

Stone
20 August 2018, 18:23
Where are you guys picking this up at? I'm not seeing any in stock anywhere...

UWone77
20 August 2018, 19:02
Rainier has the MLOK

https://www.rainierarms.com/magpul-bipod-m-lok-black/

DSG has the Pic, and probably others:

https://www.dsgarms.com/mag941-blk

Stone
21 August 2018, 15:38
Rainier has the MLOK

https://www.rainierarms.com/magpul-bipod-m-lok-black/

DSG has the Pic, and probably others:

https://www.dsgarms.com/mag941-blk

Awesome, thanks UW. I need the pic rail version for a WC trim rail. Any idea what the minimal amount of rail slots is for mounting it? The Trim rail only came with a 4 slot rail and I am hoping it will work if somebody can give me confirmation. TIA!

EDITED: JUST CALLED MAGPUL AND SHE SAID THEY RECCOMEND A 5 SLOT RAIL MINIMUM. WC IS HAVING A 50% OFF SALE ON THEIR RAIL SECTIONS TODAY!! KA-CHING! JUST ORDERED THE PIC RAIL VERSION FROM DSG AS WELL. THANKS AGAIN UW!!

FortTom
21 August 2018, 16:37
Is there any parts or way anyone knows so that I could convert a pic mount to QD? I doubt it, but I guess it doesn't hurt to ask...

Thanks,
FT[:D]

Slippers
22 August 2018, 04:07
Is there any parts or way anyone knows so that I could convert a pic mount to QD? I doubt it, but I guess it doesn't hurt to ask...

Thanks,
FT[:D]

You need the arms version if you want to make it QD. You can then use an ADM or Larue mount.

ZhouJett
6 September 2018, 16:47
Just picked one up yesterday to keep handy for my RUC Mod 2..
Magpul makes good shit.. Full function simplicity (Swivel and Cant).. all it needs is a quick disconnect version.. Usin Knights Armament 7 slot piccy to mount it.. I payed $104 at Katy Gun Gear in Houston.. the Accu-Tac on my Ultra Match 308 Mod 3 was around $300...
https://farm2.staticflickr.com/1887/44670247211_c26724c673_b.jpg
https://farm2.staticflickr.com/1870/44670246631_b608ca039a_b.jpg

ZhouJett
10 September 2018, 17:25
thats a quick release in this photo..! Damn It..!! Just Bought the Picatinny one..
I was thinking this is great.. now only if it had a quick release.. it would be perfect..
Hate it when that happens.. Turns out all the after market mounts are almost as
much as the bipod itself.. probably do the ADM mnt to match my scope mnt..