View Full Version : Rainier Mod2 Build
Uffdaphil
7 May 2019, 12:39
These pics are too embarrassing for the gallery so I’ll put it here with more info of what’s in it. My first real precision 5.56. If this does not outshoot my Noveske Gen 3 recce I will be much disappointed.
-Fluted satin 16” Ultramatch barrel bundled with their with adjustable “bleeding” gas block. Without the generous Rainier discount it would have been out of my budget. (Thanks again UW!) Balance not bad w/o the can. With the Recce 5 it wants a bipod.
-Centurion upper and rail because Monty. CMR Rail is from a group buy. (Thanks Stickman!) Made to some socom spec not usually sold to civilians. Sionics NP3 bcg because I’m p.o.’d at Fail Zero - exo cam pin too fat to fit.
-BCM lower with MBT 2 stage and A5 H2. I’ll bring an H3 to the range in case it feels better with the can. But with the intermediate length gas I expect the 2 to work fine. Down the road I’ll switch lowers to use an SSA-E that is screaming me, me, me from the safe. Range looks to finally be rain free next week.
The 3-9 Aimpoint is a placeholder until I can trade/buy something in 15-18x. Nice LWRC buis that are too high for a lot of my optics.
Good Lord, these pics are whales in the preview. Fingers crossed.
https://i150.photobucket.com/albums/s92/uffdaphil/6995E244-8244-40BC-8777-85DB7CE6E228.jpeg (https://s150.photobucket.com/user/uffdaphil/media/6995E244-8244-40BC-8777-85DB7CE6E228.jpeg.html)
https://i150.photobucket.com/albums/s92/uffdaphil/3A88E029-CB3F-481B-8014-EC2AAD010F7C.jpeg (http://s150.photobucket.com/user/uffdaphil/media/3A88E029-CB3F-481B-8014-EC2AAD010F7C.jpeg.html)
mustangfreek
7 May 2019, 17:32
Nice looking rifle. I like it.
Do you like the Larue triggers? The $87 price tag is tempting
Very nice build. Looking forward to a range report.
Uffdaphil
7 May 2019, 21:00
Nice looking rifle. I like it.
Do you like the Larue triggers? The $87 price tag is tempting
I do. They pull about like a G SSA. The bows are a little wide for my taste, but for the price I can live with that. I have 2 curved and one flat.
Former11B
9 May 2019, 19:21
Excellent build.
I have the same barrel, gas block, and suppressor (albeit a Mod 3).
With the block tuned properly, an H buffer is plenty. Since you already have an H2, I wouldn’t spend the money on another at this point, but I think an H3 would be overkill
I think I just hit the 2000 round mark on mine and it shoots just as well as it did at 200 rounds.
I’ve shot some phenomenal groups with it...I primarily use handloads but when I was testing out a 1-8 strike Eagle, I shot a hundred rounds of CBC/Magtech 77gr OTM and it did really well
Two weekends ago I was plugging steel at 600yds with my 3.5x ACOG with ease
Enjoy the rifle!!! It looks great!
Uffdaphil
9 May 2019, 21:20
Thanks 11B. I assume your H buffer is with a carbine extension. Since I have the A5 a slightly heavier buffer would seem to be indicated. I have an H1 which is less than my H2, but still more than a carbine H so I’ll bring both those to the range.
About how much did you need to open the “bleed off” block.? I see it has 30 positions! I was thinking starting up 5 from fully closed.
Former11B
10 May 2019, 19:42
Mine is fairly closed off since I opted for maximum gas reduction. I only run it suppressed so at this level it won’t function unsuppressed
Pretty sure I closed it off all the way and opened it up five clicks, tested it, five more, tested it, tthen walked it back one click at a time til I was happy. It has almost zero recoil....it’s been used to get more than a few young kids scared of the noise and recoil of the rifle they were being introduced to ARs with actually behind mine and blasting away.
Rifle looks fantastic. Enjoy!
BoilerUp
11 May 2019, 08:35
I'll just add my builds here instead of starting a new thread. I ended up with a 20" and a 16" to replace my 18" WOA barrel, my logic being that when I am punching paper from a bench, I won't care about the extra length of the 20" and will get a bit more velocity, and when I do care about maneuverability, the 16" is probably better suited for a suppressed recce build.
https://photos.smugmug.com/photos/i-ZBVmbNz/0/0796246f/X3/i-ZBVmbNz-X3.jpg
The 20" was my direct replacement of my 18" WOA and I already mentioned that in another thread.
My 16" lead to a whole new upper, shown here on my LMT MARS-L lower
https://photos.smugmug.com/photos/i-KLcxRM8/0/b74ab1c0/X3/i-KLcxRM8-X3.jpg
The RA UM mod2 polished with SA AGB is under a Geissele 15" Mk14 and with a Griffin Flash Comp MD
https://photos.smugmug.com/photos/i-bM7nrhH/0/06ed21dd/XL/i-bM7nrhH-XL.jpg
https://photos.smugmug.com/photos/i-ZRZJSQj/0/0cce2f57/XL/i-ZRZJSQj-XL.jpg
Haven't shot the 16" yet and have only had the 20" out twice so far. It loves the IMI 77gr Razor Core and I've just started to work up loads.
https://photos.smugmug.com/photos/i-Rh3P7rx/0/b85c0bb2/XL/i-Rh3P7rx-XL.jpg
Uffdaphil
11 May 2019, 08:54
Ooh, that 20” is bootiful! I have some 69hr Razor Core to try in my 16”. What is your rear bag? I need one.
BoilerUp
11 May 2019, 09:01
Ooh, that 20” is bootiful! I have some 69hr Razor Core to try in my 16”. What is your rear bag? I need one.
Thanks! Rear bag is just a cheapo from Midway but works well: https://www.midwayusa.com/product/212366/midwayusa-tactical-rear-shooting-rest-bag-olive-drab-cylinder
Uffdaphil
11 May 2019, 14:52
Thanks, cheapo is good. I’ll get two.
Aragorn
11 May 2019, 15:22
Really digging that 16 with the LMT lower. Almost bought one recently, but have NO free funds atm.
UWone77
11 May 2019, 15:35
Really digging that 16 with the LMT lower. Almost bought one recently, but have NO free funds atm.
I think the MARS maybe the best lower on the market.
Aragorn
11 May 2019, 15:46
I think the MARS maybe the best lower on the market.
Maybe. I've been holding out for a Radian though.
BoilerUp
12 May 2019, 08:42
Thanks, cheapo is good. I’ll get two.
And now even cheaper: 25% off sale at Midway on their house brand shooting accessories: https://www.midwayusa.com/product/212366/midwayusa-tactical-rear-shooting-rest-bag-olive-drab-cylinder
Aragorn
26 January 2020, 22:10
Question for those who may know...
Found what looks *kinda* like it may be a nitrided version of the Ultramatch. Can anyone confirm or deny?
https://www.rainierarms.com/rainier-arms-223-wylde-4150-chrome-moly-lined-barrel-1-7-twist-nitride/
UWone77
26 January 2020, 23:06
Question for those who may know...
Found what looks *kinda* like it may be a nitrided version of the Ultramatch. Can anyone confirm or deny?
https://www.rainierarms.com/rainier-arms-223-wylde-4150-chrome-moly-lined-barrel-1-7-twist-nitride/
If I recall correctly, these are the old Match blanks, not the UM ones.
Uffdaphil
26 January 2020, 23:10
Looks like a nice barrel but definitely a different creature from a Mod 2 Ultramatch.
-different twist
-smaller gas seat
-shorter gas system
-not stainless steel
UWone77
26 January 2020, 23:12
Looks like a nice barrel but definitely a different creature from a Mod 2 Ultramatch.
-different twist
-smaller gas seat
-shorter gas system
-not stainless steel
You are correct... different barrel all together, they were going for the match line type accuracy with better durability. So many different barrels over the years and since their barrel guy left (the one who did the specs) I've forgotten a lot of the info.
Former11B
27 January 2020, 19:47
My Mod2 build is crushing the precision matches I’ve been shooting lately. Running middle of the pack currently (my pistol skills from 40-100yds are lacking...). The 6.5CM and other 6mm rifles and pistol opticsare dominating the top of the leaderboard but I’m hitting everything they are...just not as hard lol. The rifle is amazingly accurate. Not a single hiccup and the Optimus Micro can is getting a ton of compliments on its performance
7192
I’ve got a little more dope testing to do and I should have my Valkyrie in there soon
mustangfreek
27 January 2020, 22:05
I’m surprised you haven’t painted that one..lol..it’s a good looking rifle , what scope
Former11B
28 January 2020, 03:46
It’s my only unpainted rifle lol
That’s an “older” Vortex 6-24 PST. It gets the job done but there’s other features I want which will ultimately see it get replaced. I’ll shoot it the rest of this season and take all my lessons learned and then see about a new one
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.