Duffy
15 June 2019, 08:03
MCF (MLOK Cover, Forward Controls) is a collaboration between Railscales and Forward Controls Design. Machined in G10, with the AA surface (All Angles, or dimpled) pattern we developed for our bolt catch (ABC/R), forward assist (LDFA), ambidextrous magazine release (EMR-A). The AA concept was not developed for aesthetics, but as a versatile surface that offers equal traction from all angles of approach (thus the AA designation). The AA surface can hardly find a better application than hand guard rail covers, where a user's hand can have multiple angles of approach, and hold the hand guard in different ways.
The AA pattern on the MCF is made of two dimple sizes and depths, a series of large perforations / drain holes are drilled along its length in the middle row of dimples.
MCF is available in two lengths: MCF-S (short, 3.2", covers 2 MLOK slots) and MCF-L (long, 4.7", covers 3 MLOK slots), both come standard with MLOK mounting hardware.
Width: 0.600"
Thickness: 0.125"
Length: Long 4.7"/Short 3.2"
Weight: 0.3oz per panel
416 stainless nuts
3/32 Allen key required (not included)
http://www.forwardcontrolsdesign.com/MCF_p_164.html
https://i75.photobucket.com/albums/i314/Duffypoo/MCF-L1_zpsoaawzmrr.jpg (https://s75.photobucket.com/user/Duffypoo/media/MCF-L1_zpsoaawzmrr.jpg.html)
https://i75.photobucket.com/albums/i314/Duffypoo/mcf-l4_zpsrfkjped0.jpg (http://s75.photobucket.com/user/Duffypoo/media/mcf-l4_zpsrfkjped0.jpg.html)
https://i75.photobucket.com/albums/i314/Duffypoo/mcf-L3_zpsukcrrjsu.jpeg (http://s75.photobucket.com/user/Duffypoo/media/mcf-L3_zpsukcrrjsu.jpeg.html)
The AA pattern on the MCF is made of two dimple sizes and depths, a series of large perforations / drain holes are drilled along its length in the middle row of dimples.
MCF is available in two lengths: MCF-S (short, 3.2", covers 2 MLOK slots) and MCF-L (long, 4.7", covers 3 MLOK slots), both come standard with MLOK mounting hardware.
Width: 0.600"
Thickness: 0.125"
Length: Long 4.7"/Short 3.2"
Weight: 0.3oz per panel
416 stainless nuts
3/32 Allen key required (not included)
http://www.forwardcontrolsdesign.com/MCF_p_164.html
https://i75.photobucket.com/albums/i314/Duffypoo/MCF-L1_zpsoaawzmrr.jpg (https://s75.photobucket.com/user/Duffypoo/media/MCF-L1_zpsoaawzmrr.jpg.html)
https://i75.photobucket.com/albums/i314/Duffypoo/mcf-l4_zpsrfkjped0.jpg (http://s75.photobucket.com/user/Duffypoo/media/mcf-l4_zpsrfkjped0.jpg.html)
https://i75.photobucket.com/albums/i314/Duffypoo/mcf-L3_zpsukcrrjsu.jpeg (http://s75.photobucket.com/user/Duffypoo/media/mcf-L3_zpsukcrrjsu.jpeg.html)