Field expedient tripod saddle

[Former11B]

I found out I needed a tripod for an upcoming match. It’s one of the few things I’ve not gotten due to never needing one before as well as the expense

My wife had a photography tripod she dug out of the attic since nothing will ship in time for the match date

I needed a “saddle” for it so I did some googling and got to work

I cut the bell/coupling off a piece of 2” PVC, which is around 2.25” OD. I cut it about 60-70%/30-40% off length ways. Found a bolt in the garage that match the camera tripod thread pitch, drilled a pilot hole then used the grade 5 bolt as a make shift tap.

I painted it then used some old carpet as a liner

https://i.imgur.com/o1b5kbX.jpg

https://i.imgur.com/fMhDc70.jpg

https://i.imgur.com/us2geNf.jpg

https://i.imgur.com/JDs4GDT.jpg


I’ve got a backup iPhone clamp that I was able to turn and act more like a traditional squared off saddle in the event this one breaks or something but I think this’ll hold up fine for a one day event ~100rds or so

[Uffdaphil]

I love it. Finding a solution with found parts under a deadline is so satisfying.

[Former11B]

7332


This one should work better

[VIPER 237]

Let us know your thoughts after you’ve had some time with it as I’ve been looking at one


7332


This one should work better

[Joelski]

Imagine the legs are substantially stronger on the PR tripod?

[Former11B]

Imagine the legs are substantially stronger on the PR tripod?

The what?


Let us know your thoughts after you’ve had some time with it as I’ve been looking at one

Spent about half an hour with it going from prone to standing, opening the legs up to the various positions. My only small gripe is with the swivel/rotation adjustment knob is kinda small. A wing nut would be a little easier to turn/tighten

[Joelski]

Isn't it called a precision rifle tripod? Back to calling it a thingy, I guess.

[UWone77]

Midway USA? I saw they were on sale for $129.... had to order one as well.

[Former11B]

Isn't it called a precision rifle tripod? Back to calling it a thingy, I guess.

I just call it a tripod lol



Midway USA? I saw they were on sale for $129.... had to order one as well.

I think mine was on Amazon

Yeah the deathgrip is a lot more capable than the one I’d gotten to hold me over....I needed it for a match and it was the only one I could get in time. I’ll use the smaller/lighter Havoc for hunting and as a spare at matches

Deathgrip vs Havoc:
7333

7334

7335

[Joelski]

You need one of those 400 dollar Geissele rails now. Order in time for Christmas!

[Former11B]

You need one of those 400 dollar Geissele rails now. Order in time for Christmas!

I have a Mk8 on there now....not good enough?

[Joelski]

Apparently my humor isn't jumping the gap.

[fledge]

Apparently my humor isn't jumping the gap.

[emoji23][emoji23]

It’s loud and clear on this channel.

[Former11B]

I’m teaching Kindergarten at home these days. It’s taken a toll on my interactions with other adults

[mustangfreek]

Lol

[mustangfreek]

Bump for info

How is the Bog tripod working out?

How Stable is the rifle once clamped in? As in how good does it hold?

[Former11B]

Bump for info

How is the Bog tripod working out?

How Stable is the rifle once clamped in? As in how good does it hold?

Very stable

I’ve used anything from a 10.5” to a suppressed 20” in it, along with non-AR platforms as well as using it as a cradle for a monocular when doing RO duty calling hits.

If you’re over 6’3 or so the legs may not be long enough for you to get a good standing position with a rifle and might need a tripod with longer legs.


I got it on sale for less than $150. People pay triple that for a good tripod head alone. It’s a solid entry level setup. If you think you’ll be backpacking it or carrying it in the woods for extended periods you may opt for the slightly more expensive carbon fiber version to save weight

[eric28]

;);)

[mustangfreek]

Thanks for the actual feedback.

Got some cabelas cards stacked up and keep thinking about grabbing one to try out.