Silencerco MAAD mounts?

[rxer311]

I have an older Silencerco Saker (my only can) with the MAAD mount system. Looks like the flash hiders and comps with the MAAD mount are discontinued. Still need them going forward. Anybody have a stash or know of a way to get ahold of at least one?

[alamo5000]

Not sure but you can also consider doing what Former11b did here:

http://www.weaponevolution.com/forum/showthread.php?11876-ECCO-Machine-51T-to-Omega-threads-Plan-A

[alamo5000]

While I am not familiar with your suppressor at all something like this from these guys (or someone else) might be a good option.

https://www.griffinarmament.com/plan-a-taper-mount-adapter-for-omega-nomad-other-1-375x24-threaded-suppressors/#description

[alamo5000]

This one says it's compatible with the Saker. I don't know anything at all about those mounts though.

https://www.griffinarmament.com/plan-a-taper-mount-adapter-for-chimera-and-saker-asr-suppressors/

[rxer311]

This one says it's compatible with the Saker. I don't know anything at all about those mounts though.

https://www.griffinarmament.com/plan-a-taper-mount-adapter-for-chimera-and-saker-asr-suppressors/

I am going to do a bit more research on this option. SiCo really should just send me an ASR mount for my Saker so I can just keep buying their muzzle devices. Kinda sucks that I gotta make a change but you gotta do what you gotta do.

Thanks everybody.

[UWone77]

MAAD mounts suck.

Cost/Benefit you can swap your Saker to a Keymo mount. Even at minimum go with the ASR mount.

[mustangfreek]

I’m not real familiar with that can
Does it have the 1.375" X 24 threads in the can?

If so then you have quite a few options
Dead air
Griffin
Yhm
Hellfire
Jmac

And more

[UWone77]

If you insist on staying with MAAD Mounts, I just checked some stock. I have 3 MAAD muzzle devices.

1 FH 1/2x28
1 Brake 1/2x28
1 Brake (Noveske Marked) 5/8x24

[rxer311]

Thanks. I might take those off your hands. Let me know what you would like for them.

In any case I will have to eventually make a change.

[chrischoi]

MAAD mounts suck.

Cost/Benefit you can swap your Saker to a Keymo mount. Even at minimum go with the ASR mount.

I like it until I got a FH stuck. When I tried to take it off I broke the pin and it sheared through the threads. But then I saw a Key-Mo get seized. So now I'm just bummy about it. Too many Trifecta muzzle devices to swap out at this point.

[tact]

Some years ago I had a problem with a MAAD mount. I contacted SiCo and was sent a ASR mount for free.

[rxer311]

Some years ago I had a problem with a MAAD mount. I contacted SiCo and was sent a ASR mount for free.

Yeah...not the case today.

I decided to change mounting hardware.