PDA

View Full Version : What size punches do I need?



Creeky73
11 June 2009, 15:56
I would like to get a set of punches for working on my AR and my Glock 17. Is there a punch set that has everything I need, or should I look to buy individual punches?

tac40
14 June 2009, 09:33
I'll offer up my 2 cents here, I'm working on an AR lower and ran into that problem, which punches and tools. A friend who is a Colt, Glock, S&W, 1911 and Sig armourer advised me to get a complete set of punches, 4oz hammer,
roll pin punch, nylon hammer, rifle/pistol block and a good multi-vise.

Punch sizes from 1/16 to 5/16 is a good start. I went over to the local hardware store. I checked with the on-line sites but didn't need all the tools, in the kits since I had most of them already. I've taken some classes and have a medium size tool box fill with tools to work on Glocks-by far the easiest, AR, M14 style rifles and now 1911. This has become a hobby and I like tinkering around.

Osh hardware store sells a complete punch set for around $10.00-$15.00. Good luck.

tac40
14 June 2009, 12:16
a basic set of punches helped in putting in the LPK in this lower, about 25-30 minutes worth of your time in tinkering.

http://i659.photobucket.com/albums/uu319/horseplay/IMG_4864.jpg

tac40
11 July 2009, 14:15
http://www.brownells.com/.aspx/pid=8855/Product/MINI_PUNCHES

http://www.brownells.com/.aspx/pid=5551/Product/ROLL_PIN_PUNCHES

http://www.brownells.com/.aspx/sid=21947/sku/440_Prick_Punch

Here's a starting place

tac40
13 July 2009, 07:38
http://www.m-guns.com/tool_new.php?product=moacks

I like to add, Ned makes some of the best tools arounds for properly staking your BCG and/or woorking on your AR.