PDA

View Full Version : G-Code Kydex Holster



C-Fish
8 September 2009, 15:43
Received my new holster from Gunners Alley today in the mail.

I am replacing a Blackhawk Serpa (after I learned about all of the issues with them).

I did a ton of research before I made the decision to purchase...I am VERY glad I went with this platform.

Here are some photos of the holster, notice how well the fit is to the pistol.
User adjustable retention screw located in front of the trigger guard.
I really like that the holster doesn't protrude below the trigger guard...
http://i59.photobucket.com/albums/g296/mseiferth/Holster/DSC_0305.jpg
http://i59.photobucket.com/albums/g296/mseiferth/Holster/DSC_0313.jpg
http://i59.photobucket.com/albums/g296/mseiferth/Holster/DSC_0314.jpg
http://i59.photobucket.com/albums/g296/mseiferth/Holster/DSC_0315.jpg
http://i59.photobucket.com/albums/g296/mseiferth/Holster/DSC_0316.jpg

Holsters come in Black, OD Green, Coyote tan (pictured) and Foliage Green.

There is a litany of options for this platform as well. One attachment is standard with the holster.
Holster was $52.50 shipped.
* Straight drop paddle
* Straight drop belt slide attachment (this is what I chose)
* 15 degree forward cant paddle
* 15 degree forward cant belt slide attachment
* An additional adapter, called the mid/low, is also available for the straight drop and/or 15 degree forward paddles. This adapter allows you to lower the holster height another 1-1/2".
* REAC Ready Tactical Harness
* Comfort Carry IWB Harness

The photos are of my Glock 17. The muzzle protrudes about 3/8".
This holster will also work with my 19.

Here is their website.
http://www.gunnersalley.com/product/GCODEBELT/GCODE_Kydex_Holster.html

I did not receive any compensation for this review, just passing on my personal opinions to my fellow shooters.

Stickman
20 September 2009, 21:19
Thanks for posting the review, the holster looks like it offers a lot of adjustment, and its a pretty good price. It seems like some kydex is starting to get extra spendy.

CCK
21 September 2009, 11:31
I much prefer the two piece construction that this holster and Raven Concealment offers over folded kydex.

Is your intention to use this for concealed carry?


Chris

C-Fish
21 September 2009, 16:29
I much prefer the two piece construction that this holster and Raven Concealment offers over folded kydex.

Is your intention to use this for concealed carry?


Chris

Chris, this rig will be used for open carry and the few matches that I participate in throughout the year. I use a (Predator) IWB Kydex holster for CCW.


One other note on this lineup, all of the attachments are compatible with all hoslters.

tac40
23 September 2009, 22:11
Please keep us posted on the wear and tear on this holster.

Custom-X_Sponjah
28 September 2009, 12:57
Please keep us posted on the wear and tear on this holster.

I have been using G-Code Kydex Holsters for more than a year now.
All of mine use the RTI system.
I'll post Some pics and my opinion on these holsters if its OK with the OP..

CXS

C-Fish
29 September 2009, 16:11
I have been using G-Code Kydex Holsters for more than a year now.
All of mine use the RTI system.
I'll post Some pics and my opinion on these holsters if its OK with the OP..

CXS

Go for it...I welcome other input.

Custom-X_Sponjah
29 September 2009, 22:25
I live down the road from G-Code (Edge-Works Manufacturing)
I have been using the holsters for more than a year in multiple configurations.
I use 3 holsters primarily. G-Code XD-45, G-Code Glock 19, and Blackhawk Serpa for the XD-45.
All three holsters can interchange between my multiple RTI adapters.
I have the Offset Drop RTI Adapter, Belt Slide RTI Adapter, I added a RTI wheel to my HSGI UDHP, RTI Claw (not shown) and a couple RTI wheels mounted in specific locations.
I open carry the XD Serpa or Glock G-Code holster daily.
The XD G-Code usually sits in the UDHP, but I switch it out sometimes to use the Glock in the DL.
When properly adjusted all have great retention and no wobble.
I really like the fact I can still use my Serpa by adding the RTI plate to the rear of the Holster.
If you look at cost, and ease of use the G-Code RTI system you can see why I like it so much.
I also use the Glock G-Code holster with my Airsoft G19 pistol, I just have to adjust the tension screw a little.

http://i87.photobucket.com/albums/k160/topher63/P9300050.jpg

http://i87.photobucket.com/albums/k160/topher63/P9300051.jpg

http://i87.photobucket.com/albums/k160/topher63/P9300052.jpg

http://i87.photobucket.com/albums/k160/topher63/P9300053.jpg

http://i87.photobucket.com/albums/k160/topher63/P9300054.jpg

http://i87.photobucket.com/albums/k160/topher63/P9300055.jpg

http://i87.photobucket.com/albums/k160/topher63/P9300057.jpg

http://i87.photobucket.com/albums/k160/topher63/P9300058.jpg

http://i87.photobucket.com/albums/k160/topher63/P9300059.jpg

http://i87.photobucket.com/albums/k160/topher63/P9300060.jpg

http://i87.photobucket.com/albums/k160/topher63/P9300061.jpg

http://i87.photobucket.com/albums/k160/topher63/P9300064.jpg


CXS

montgomerygentryFan
30 September 2009, 18:37
CXS, those are some great pictures for comparison between the different holsters. I'm currently trying to decide between G-Code or Safariland's MLS system. I currently only have a Blade-Tech and no other manufacturer to compare to, but did you have to drill new holes to install the RTI mounts? Thanks

Custom-X_Sponjah
30 September 2009, 20:58
but did you have to drill new holes to install the RTI mounts? Thanks

NOPE. There are RTI Plates for pretty much every holster.
Most holsters use the same mounting holes.
The Serpa and G-Code for my XD-45 have the same mounting holes and use the same adapter. They look different as one plate is newer.

CXS

Custom-X_Sponjah
2 October 2009, 20:48
CXS, those are some great pictures for comparison between the different holsters. I'm currently trying to decide between G-Code or Safariland's MLS system. I currently only have a Blade-Tech and no other manufacturer to compare to, but did you have to drill new holes to install the RTI mounts? Thanks

I have something to show you..
Stopped by G-Code today and picked up some Un-Released Items.
I'm out of town tonight and will post some pics tomorrow.

CXS

montgomerygentryFan
3 October 2009, 11:00
CXS I appreciate it greatly. I've heard nothing but good things about G-Code. With so many choices out there it's good to see the comparisons side-by-side in your pictures. I'm really liking the modularity of their platform and with the different adapters. Thanks again

Go4broke
9 October 2009, 13:49
Hey CXS...where or who can i order the G-code RTI system or mounts from ?
I dont see them on the Gunner's Ally website.

C-Fish
10 October 2009, 09:29
Click Here (http://www.eagleindustries.com/home.php?cat=90)

Go4broke
10 October 2009, 11:14
Cool ... thanks C-Fish ! [:D]

Custom-X_Sponjah
13 October 2009, 21:31
Sorry for the delay.
Just got back to the states yesterday.

Here are some pics of the G-Code sample I received for evaluation.
The XST release mechanism will be slightly different.
It is currently fielded in some harsh conditions, and doing fine.
Also, G-Code is coating the kydex in Camouflage Material, so every inch of your kit can be multicam, Marpat, UCP, ect....
I'll have pics of my finalized G-Code Drop leg rig and holster in MC soon.
The greatest part of the G-Code line is the RTI system.
The RTI wheel and adapters allow the user to keep one holster and transfer it to different platforms instantly.
Any questions you might have, lemme know.

http://i87.photobucket.com/albums/k160/topher63/PA130004.jpg

http://i87.photobucket.com/albums/k160/topher63/PA130005.jpg

http://i87.photobucket.com/albums/k160/topher63/PA130006.jpg

http://i87.photobucket.com/albums/k160/topher63/PA130007.jpg

CXS

montgomerygentryFan
15 October 2009, 09:27
CXS,

Thanks for the pictures. That's a nice looking setup, I'm definitely headed in the direction of getting a G-Code now. I really like having the ability to fit different makes onto the same system. Can't wait to see the pictures of the finalized holster.

Go4broke
22 October 2009, 14:27
Hey CXS ,

Like the G-Code drop leg rig...is the XST release mechanism a prototype ?

Any info on when and where we can get this kit would be appreciated . [:D]

Custom-X_Sponjah
4 November 2009, 17:51
Hey CXS ,

Like the G-Code drop leg rig...is the XST release mechanism a prototype ?

Any info on when and where we can get this kit would be appreciated . [:D]

I'll call Scott @ G-Code tomorrow and get an ETA on my Finalized Holster.

CXS

nozzle13
6 November 2009, 12:01
CXS, great looking holsters.
Any chance next time you talk to G-Code, you could ask about getting one made up for a HK P-30. I pretty much have all Comp-Tac rigs right now, and they are not all that modular, and I sure would like to purchase one and have it shipped to Tennessee.
Thanks,
Marty

Custom-X_Sponjah
11 November 2009, 21:55
So I stopped by G-Code and picked up some goodies..
I'll try and get some good pics, but the weather here is not co-operating for range time..
I forgot to ask about the HK P-30, sorry brother..

Here are a couple pics I snapped with my Cell Phone..


http://i87.photobucket.com/albums/k160/topher63/IMG00408-20091111-1222.jpg

http://i87.photobucket.com/albums/k160/topher63/IMG00409-20091111-1222.jpg

CXS

eddymunster
12 November 2009, 12:56
Great info. I was looking very hard at the Raven but I just ordered a GCode for my G19. Anyone using the IWB harness?

Custom-X_Sponjah
13 November 2009, 22:22
Great info. I was looking very hard at the Raven but I just ordered a GCode for my G19. Anyone using the IWB harness?

Scott said he's working on a better design.

CXS

Custom-X_Sponjah
13 November 2009, 22:28
I am pretty impressed with the new G-Code system I picked up.
Need to get some good range time with it.
The XST system is slick. Push down on the thumb lever and the Hood springs out of the way.
Then the pistol is still held in place with friction retention.
Also the Multicam Fabric coating is the Tits..
I picked up a suede coated holster also, this fabric coating reduces the acoustical sound kydex makes when hit.
Since all the G-Code holsters I have use the RTI mounting system, I can use the same holster on various platforms.
Scott @ G-Code keeps coming up with great products.
I cant wait to show the AR15 Mag pouch when he's done with it. (Getting it with the Multicam Fabric Coating)

Mounted to the front of my Eagle Plate Carrier.
http://i87.photobucket.com/albums/k160/topher63/HSGI/PB140088.jpg

Close up without flash to show fabric.. (Need to work on white balance)
http://i87.photobucket.com/albums/k160/topher63/HSGI/PB140089.jpg

View of the XST System.
http://i87.photobucket.com/albums/k160/topher63/HSGI/PB140090.jpg

How to grip and press the Lever.
http://i87.photobucket.com/albums/k160/topher63/HSGI/PB140091.jpg

Springs out the way.
http://i87.photobucket.com/albums/k160/topher63/HSGI/PB140092.jpg

In my HSGI UDHP.
http://i87.photobucket.com/albums/k160/topher63/HSGI/PB140093.jpg

All wrapped up..
http://i87.photobucket.com/albums/k160/topher63/HSGI/PB140095.jpg

G-Codes Drop Leg Platform.
http://i87.photobucket.com/albums/k160/topher63/HSGI/PB140096.jpg

Sample of my G-Code collection.. (Just what was in quick view. I have a lot more)
http://i87.photobucket.com/albums/k160/topher63/HSGI/PB140097.jpg

CXS

Sak007
16 November 2009, 07:17
Where do we get G-code for those of us that don't live near it such as some . I live by TAD Gear maybe we can work out something ?[:D]

Custom-X_Sponjah
18 November 2009, 20:13
Where do we get G-code for those of us that don't live near it such as some . I live by TAD Gear maybe we can work out something ?[:D]

TAD Gear is an HSGI Dealer, so I'm set there already.
Contact G-Code Directly.
I am currently working on building a relationship between HSGI and G-Code to help meet the demand and take some strain off G-Code..
Hopefully you will see something soon.

CXS

eddymunster
19 November 2009, 12:18
Scott said he's working on a better design.

CXS



My G-Code holster just arrived and it looks GTG. I have currently been using a Serpa and I have to say this fits very tightly to the body compared to the Serpa. I use a Comp-Tac 2 o'clock for CC in the summer so I also got the IWB harness to try it out. I would be interested in seeing the new design when it comes online if possible.

Go4broke
20 November 2009, 00:58
TAD Gear is an HSGI Dealer, so I'm set there already.
Contact G-Code Directly.
I am currently working on building a relationship between HSGI and G-Code to help meet the demand and take some strain off G-Code..
Hopefully you will see something soon.

CXS

CXS ,

Congrats on the job with HSGI , hopefully you'll start carrying the G-Code line of holsters ... please let us know. [:)]

Sak007
20 November 2009, 04:19
In my HSGI UDHP.
http://i87.photobucket.com/albums/k160/topher63/HSGI/PB140093.jpg

All wrapped up..
http://i87.photobucket.com/albums/k160/topher63/HSGI/PB140095.jpg

Now does the plate on the holster have a matching back plate or does it just screw into the holster?

Sak007
20 November 2009, 09:51
Also is this the official website ? http://www.tacticalholsters.com/gcode.htm
It see more info on other retailers sites .

Go4broke
20 November 2009, 15:21
Also is this the official website ? http://www.tacticalholsters.com/gcode.htm
It see more info on other retailers sites .

Yup...thats the website for Edge Works Manufacturing , they make G-Code holsters.

You can E-Mail Scott at Edge Works for any info...Scott says the XST system
holsters are ready.

You can also order direct from them. [:D]

Urban Tactical Gear
22 November 2009, 13:05
what's the status on the itw version?

Custom-X_Sponjah
22 November 2009, 20:55
what's the status on the itw version?

Gonna be some time.
I hope to be working closely with them on this..
My plate keeps getting loaded.

CXS