Titan Armory 6.8 Xtreme

[VLODPG]

I have finally completed my Titan Armory Xtreme preorder#65

This was a preassembled upper that all I had to do was install the rail of my choice & optics.

Spec's as follows:
Titan Armory nitro-carburized Xtreme preassembled upper w/ITS bolt
PRI rifle length carbon fiber tube
Aim point M3/Larue M68CCO Mount
GG&G Bi-pod

Already made 2 trips to the range to work on break in.
She shoots great but is handicapped by the lack of magnification. (optic subject to change)
No lower on her now because I haven't decided which lower & configuration to use! (actually nice to have this problem)

Enjoy

http://i38.tinypic.com/1443392.png

http://i34.tinypic.com/kehs11.png

http://i33.tinypic.com/289is2c.png

http://i38.tinypic.com/zydr0z.png

[Paulo_Santos]

Looks nice. Is that the one you had the problems with the MI Rail?

[VLODPG]

I bought it without a rail because I did not know at the time what I want to use for this build.

My primary use for this will be deer hunting & blasting varmints so I wanted it to be light thus the PRI tube.

I have the 6.8 bug bad & have a Vltor MUR & a Noveske 16" barrel in the wings for another build.

I will have to read thru the loading data stickies & pick up some supplies to start loading, finally have enough brass to reload.

[Paulo_Santos]

H4198 and RE7 work real well with the 80-100 GR bullets. For the heavier bullets H322 and RE10x work real well. RE10x is probably the best powder for the 90-115 GR bullets.