Where Piston Bold and Carrier?

[knguye11]

Does anyone know where I can purchase a piston BCG? I recently acquired a new LMT piston upper and would like to get BCG as a backup. I've checked on LMT website and couple other vendors, but don't them offer these parts for piston system. Greatly appropriated if you can point me to the right direction.

[Paulo_Santos]

Call up LMT Directly. If no luck, Adam's Arms, LWRC, and CMMG are most likely compatible with the LMT. I'd call them up directly.

[JustMatt]

I can vouch for the Adams Arms equipment but I dont know if there one biece bolt carrier will work with another company's piston system. I would imagine that the size of the piston strike face on the bolt carrier would have to match up with the LMT as well as the piston rod length.

[Paulo_Santos]

Most of these systems are very similar to each other. I would be surprised if they weren't compatible.

[knguye11]

I called LMT and I do have them available. $286 for BCG just in case someone needs one.

[d90king]

I would give a hard look at the LWRCI BCG... Here is a couple pics...

http://i156.photobucket.com/albums/t5/d90king/DSCN1205.jpg
A little better pic
http://i156.photobucket.com/albums/t5/d90king/LWRCi_M6A3_K.jpg

[tac40]

Be aware of the length of the push rod between the systems. The BCG designs are similar but are different, I looked at the Sabre, POF, LWRCi, Stag & BM, each is different so be aware. The different BCG in the LMT system may flex your push rod and may cause wear & tear. Consider staying with the LMT BCG.

Good luck. You can order from LMT directly.