Scope mount advice

[reiswigt]

I am looking for a scope mount that will allow me to keep my Troy BUIS with a Nightforce 8-32 x 56. I tried a friends Armalite mount from his AR-10, and it was to low.

I thought a Bobro mount would be great, but now I am afraid they would be to low also.

Thanks for the advice.

[m24shooter]

I don't know how big the occular bell on the NF is, but here's a Burris in an ADM Scout with a Magpul BUIS, which isn't real small.

http://i15.photobucket.com/albums/a391/m24shooter/RA%20upper%20and%20ADM/100_1448.jpg

[reiswigt]

It looks like I will need a mount that has 1 7/8" from rail to center of scope if I am to keep my BUIS. Any suggestions?

[TehLlama]

LT 1.94 is an option. It might be a touch high, but a bit of tape on the stock can fix that.

[reiswigt]

Thanks! That may be just about perfect. Fortunately the PRS can be adjusted up.

[TehLlama]

With the PRS - of course, that combination is money! The centerline won't really go that far up, but if your eye relief is right, the PRS will make that too easy.