AAC Blackout timing?

[miczero]

I've done some Google research and of course read the install instructions, but wanted to ask the forum before I do the final install. I have the 51T Blackout FH and when I thread it on and hand tighten, one of the prongs is very close to 12 o'clock and looks like it will be exactly at 12 when torqued. This leaves one of the gaps directly at 6 o'clock, which seems somewhat backwards to me.

So, am I worrying about nothing or is their something else I should do? The barrel is a BCM 16" BFH model.

[jp0319]

You are worrying about nothing, the blackout requires no timing. That is why they dont come with spacers or crush washers.