S.D.M.R. Build (Site Designated Moderator Rifle)

[Rusty_ Shackleford]

This is my first post here so allow me to introduce myself. My name is Randy and I am a moderator at ar15chatterbox.com and a hopelessly addicted Ar junkie. I am a member of several other Ar and Glock forums and I look forward to learning from you guy's. This is the start of a very special rifle for me. I commissioned Quentin Defense to build a special run of billet lowers for our website and I am very proud to have been a part of it. I hope you enjoy.......[noob]

S.D.M.R. Build (Site Designated Moderator Rifle)....... [BD]

The package:
http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB1.jpg
The Lower:
http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB3.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB2.jpg

A couple shots of Jason's genius with the threaded roll pin replacement..... :cool:
http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB4.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB5.jpg

Now how sweet is that? [wow]
http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB7.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB8.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB9.jpg

And lets not forget the tension screw to make everything nice and tight........ :cool:
http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB6.jpg

The Timney 3lb. skeletonized trigger and RRA ambi-star. Oh and the Pmags drop free...... :cool:

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB11.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB10-.jpg

Not my best pics but here goes.......

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB19.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB13.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB14.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB15.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB16.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB17-.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB18.jpg

[Paulo_Santos]

That is looking good. Can't wait to see the finished product.

[Rusty_ Shackleford]

That is looking good. Can't wait to see the finished product.

Thank you Sir! That makes two of us.........[:)]

[4SRecon]

This is cool, I'd say you're off to a great start. What are you planning for the other half? Any hints?

[Rusty_ Shackleford]

This is cool, I'd say you're off to a great start. What are you planning for the other half? Any hints?

I'm not sure yet due to current finances but I would like to use a Quentin Defense upper and I am trying to work a deal on a US Optics scope right now. In the end it will be a SPR of some sort.......

[4SRecon]

That's cool, I'm curious to see how it all turns out- keep us posted with lots of pictures ;)

[mvician]

:P

http://i48.photobucket.com/albums/f240/mvician/ChatterBox/CB0001011.jpg

[federalist22]

Nice choice and you will be real pleased with yourself once complete. Looks good.

[Rusty_ Shackleford]

:P

http://i48.photobucket.com/albums/f240/mvician/ChatterBox/CB0001011.jpg

Looks good brother![adore]

[Fred_G]

I like the trigger guard on those lowers. Would you mind posting prices for the stuff? I am looking into building a lower one day. Bugs me having 2 uppers and only one lower... Nice looking stuff though. I would add a B.A.D. to them.

[Shrockp]

I like that I am trying to decide what I want to build when I Buy one of those lowers... come on August

[Engineer5]

What sling adapter is that on you SDMR? I like the looks of it.

[Rusty_ Shackleford]

What sling adapter is that on you SDMR? I like the looks of it.

Thanks brother! It's a Troy, here's a link (http://store.troyind.com/Sling_Mounts_s/37.htm).......

[MoxyDave]

I love the threaded bolt catch pin. Installing that pin is probably the trickiest part of a lower build. I wonder if it might work loose with hard use? Of course you'd use threadlocker ...

[Rusty_ Shackleford]

Of course you'd use threadlocker ... Absolutely.......;)

[mjkeat]

Im looking forward to seeing the finished product as well.

[Rusty_ Shackleford]

Im looking forward to seeing the finished product as well. Thanks Mike! Money is killing me right now so it may be a while.......:(

[Rusty_ Shackleford]

Well what we have here is a temporary Chatterbox hybrid, upper half courtesy of Larue Tactical. This is the 20" Stealth with there 13.2" hand guard. This will be the exact configuration for the all Larue build. I hope to have the lower by month's end. I am going to be changing up the CB's lower configuration to accommodate the 6.5 monster I plan on creating, in the mean time this will do quite nicely.........

Lower:
Quentin Defense “Chatterbox Edition “Billet Lower
Daniel Defense LPK
RRA Ambi-Star Safety Selector
Timney 3lb. Skeletonized Trigger
Ergo Sure Grip
A2 Butt Stock
Troy Ind. Ambidextrous Q.D. A4 Sling Adaptor

Upper:
Larue Tactical 20” Stealth Billet Upper
Mil-spec HP MP BCG
Larue Tactical 13.2 Hand Guard
Troy Front & Rear Sights
KAC Rail Panels
Larue SPR 1.5 Scope Mount
Leupold 3x9x40 Mil-dot Scope
Larue Q.D. Bipod Mount
Harris 3” - 9” Bipod


http://i555.photobucket.com/albums/jj475/Cansler_Tactical/Smileys/ththus4allstrandst-1.gif

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/IMG_0970.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/IMG_0972.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/IMG_0975.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CBLarue1.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CBLarue3.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CBLarue2.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CBLarue4.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CBLarue5.jpg

It's real temporary now.......[wow] More to come......[:D]

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/Ar15chatterbox-Larue.jpg

[m249saw]

Beautiful!

[Rusty_ Shackleford]

Well folks I made a slight change in plans, hope you enjoy it as much as I do.........[:D]


Upper:
Quentin Defense Billet Upper (Chatterbox Limited Edition)
DD CHF Govt. Profiled 14.5" Mid-Length
DD Omega X 9.0 Free Float Rail
DD A1.5 BUIS
DD Charging Handle
BCM BCG (will replace with DD when they are available again)
BCM A2X (pinned and welded)
Larue Index Clips
Surefire X300
Built by ADCO

Lower:
Quentin Defense Billet Lower (Chatterbox Limited Edition)
DD Lower Parts Kit
DD Receiver Extension
DD H Buffer and Spring
DD Single Point End Plate
Armalite Adjustable 2 Stage Trigger
Ergo Sure Grip
RRA Ambi-Star Safety (will be replacing with BAD ASS)
Magpul CTR (may replace with SOPMOD)
Magpul PMAG
Built By Rusty

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB_145_mid_length_1.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB_145_mid_length_10.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB_145_mid_length_2.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB_145_mid_length_3.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB_145_mid_length_5.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB_145_mid_length_6.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB_145_mid_length_7.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB_145_mid_length_8.jpg

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB_145_mid_length_9.jpg

[brit]

Change of plans eh? Looks like you just built a completely different rifle!

Looks great by the way. Solid build.

[Paulo_Santos]

Looks great.

[Rusty_ Shackleford]

Thanks guys![:)]

[Rusty_ Shackleford]

Here are some additional photo's of the individual internal parts........

BCM Carrier Group (Unmarked Carrier):
http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB-15_BCM_BCG_2.jpg
http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB-15_BCM_BCG_1.jpg
http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB-15_BCM_BCG.jpg

Armalite 2 Stage Trigger:
http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB-15_Armalite_2_Stage_2.jpg
http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB-15_Armalite_2_Stage.jpg

DD H Buffer:
http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB-15_DD_H_BUFFER.jpg

Take Down Pin Captive Detent and Spring Mod:
http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB-15_Captive_Take_Down_Detent_Spring.jpg

[chazthebiker]

I love the threaded bolt catch pin. Installing that pin is probably the trickiest part of a lower build. I wonder if it might work loose with hard use? Of course you'd use threadlocker ...

I'm with you. Really like the threaded bolt catch pin. That is one great idea I think.

[Rusty_ Shackleford]

Added KNS pins the other day.......[:D]

http://i555.photobucket.com/albums/jj475/Cansler_Tactical/CB_145_mid_length_11.jpg