PDA

View Full Version : MULTITASKER- AR15 Multi-Tools



Quib
17 July 2010, 15:45
The Multitasker 2010 Multi-Tool Line Up


http://quib.weaponevolution.com/MT Group.JPG


http://www.multitaskertools.com/

Quib
17 July 2010, 15:51
In the Mulitasker M16-M4-AR15 Multi-Tool Line Up for 2010, we start off with the Multitasker Series2 Multi-Tool.




http://quib.weaponevolution.com/MT2 1.JPG

Quib
17 July 2010, 15:59
The Multitasker Series2 Multi-tool kit consists of the Series2 tool, MOLLE compatible 1000D Nylon carry pouch reinforced with an internal EVA hard-shell, and 10 each ¼” drive hex bits in sizes most commonly associated with M16-M4-AR15 accessories.




http://quib.weaponevolution.com/MT2 3.JPG

Quib
17 July 2010, 16:20
Let’s take a look at the specifics of the new Series2 Multi-Tool.

Precision CNC machined from billet tool steel, the Series2 consists of the following:

- Needle-Nose pliers with wire cutter jaws.

- Non-slip G10 MaxGrip Side Panels

- Brass shanked dental pick/scraper, which is threaded to the Series2 with 8-32 male threads compatible with the OTIS brand series cleaning kit pull cable and accessories. For those utilizing the OTIS cleaning kit, the Series2 can be threaded onto the OTIS pull cable to assist in pulling the OTIS through the bore.

- 2.5” long Tanto style knife blade made of 440C Stainless Steel, secured in the open position with a liner lock safety.

- Bolt Tail and Carrier carbon scraper with a unique bent-tip radiused edge.

- Machinist’s file with built-in 5/16” Flat-tip screwdriver.

- 3/8” box-end wrench for adjusting LaRue optic mount tension settings.

- Receiver Extension Castel-Nut Wrench

- Built-In Lanyard Loop

- Magnetic ¼” drive hex bit holder with 10 assorted hex bits to include an A2 style 4-prong Front Sight Post adjuster.




http://quib.weaponevolution.com/MT2 2.JPG


http://quib.weaponevolution.com/knife blade.JPG

Quib
17 July 2010, 16:25
http://quib.weaponevolution.com/MT2 4.JPG

Quib
17 July 2010, 16:26
http://quib.weaponevolution.com/MT2 5.JPG

Quib
17 July 2010, 16:26
http://quib.weaponevolution.com/MT2 6.JPG

Quib
17 July 2010, 16:27
http://quib.weaponevolution.com/MT2 7.JPG

Quib
18 July 2010, 11:03
For those looking for an AR Multi-tool lighter and more compact than the Series2 shown above, comes the Multitasker Ultralight.

The Ultralight, much like the Series2 kit, comes with a MOLLE compatible 1000D Nylon carry pouch and 10 each ¼” drive hex bits in sizes most commonly associated with M16-M4-AR15 accessories.



http://quib.weaponevolution.com/Possibility 1.JPG

Quib
18 July 2010, 11:22
Let’s take a look at the specifics of the new Multitasker Ultralight Multi-Tool.

Precision CNC machined from billet tool steel, the Ultrlight consists of the following:

- Non-slip G10 MaxGrip Side Panels

- Brass shanked dental pick/scraper, which is threaded to the Ultralight with 8-32 male threads compatible with the OTIS brand series cleaning kit pull cable and accessories. For those utilizing the OTIS cleaning kit, the Ultralight can be threaded onto the OTIS pull cable to assist in pulling the OTIS through the bore.

- Bolt Tail and Carrier carbon scraper with unique bent-tip radiused edge.

- Receiver Extension Castel-Nut Wrench with built-in 5/16” Flat-tip screwdriver.

- Built-In Lanyard Loop with Pocket Clip.

- Compact and lightweight at 4.25” X 1.00” X 0.75” and 7 ounces weight.

- Magnetic ¼” drive hex bit holder with 10 assorted hex bits to include an A2 style 4-prong Front Sight Post adjuster.



http://quib.weaponevolution.com/UL1.JPG



http://quib.weaponevolution.com/UL2.JPG

Quib
18 July 2010, 11:26
http://quib.weaponevolution.com/UL4.JPG


http://quib.weaponevolution.com/UL5.JPG


http://quib.weaponevolution.com/UL6.JPG


http://quib.weaponevolution.com/UL7.JPG

Quib
18 July 2010, 15:33
Lastly in the Multitasker M16-M4-AR15 Multi-Tool Line Up for 2010, we finish off with the Multitasker TUBE.

The Multitasker TUBE Multi-tool kit consists of the TUBE, 1000D Nylon hard-shell storage case, and 10 each ¼” drive hex bits in sizes most commonly associated with M16-M4-AR15 accessories. The hard-shell storage case is outfitted with internal elastic straps and pockets to safely secure the accessories stored within.



http://quib.weaponevolution.com/MTT 11.JPG

Quib
18 July 2010, 15:37
Let’s take a look at the specifics of the new Multitasker TUBE Multi-Tool.

Precision CNC machined from 6061T6 aluminum, the Multitasker TUBE consists of the following:

- The same Bolt Tail and Carrier carbon scraper found on the Series2 and Ultralight Multi-tools, removable and interchangeable with the Brass shanked dental pick/scraper.

- As with the Series2 and Ultralight Multi-tools, the TUBE is threaded with 8-32 male threads compatible with the OTIS brand series cleaning kit pull cable and accessories. For those utilizing the OTIS cleaning kit, the TUBE can be threaded onto the OTIS pull cable to assist in pulling the OTIS through the bore.

- Lower Receiver Pivot Pin/Take-down Pin punch.

- Pocket Clip which also serves as a flat-tip screwdriver.

- Magnetic ¼” drive hex bit holder with 10 assorted hex bits to include an A2 style 4-prong Front Sight Post adjuster.



http://quib.weaponevolution.com/MTT 1.JPG


http://quib.weaponevolution.com/MTT2.JPG


http://quib.weaponevolution.com/MTT4.JPG


http://quib.weaponevolution.com/MTT5.JPG


http://quib.weaponevolution.com/MTT7.JPG


http://quib.weaponevolution.com/MTT6.JPG

Quib
18 July 2010, 15:38
The small size of the Multitasker TUBE makes it ideal as an add-on accessory to the GI cleaning kit.



http://quib.weaponevolution.com/MTT3.JPG

Quib
3 October 2010, 15:48
http://quib.weaponevolution.com/FDE TUBE Intro.JPG




From Multitasker Tools LLC, comes the latest AR15 Multi-Tool about to hit the market…..the Multitasker TUBE in FDE (Flat Dark Earth).


http://quib.weaponevolution.com/FDE TUBE 1.JPG

Quib
3 October 2010, 16:05
The Multitasker TUBE in FDE has the addition of o-ring seals around the main body of the TUBE, a nice added feature which seals the caps when installed.

An additional Expansion Pack (Shown in the photos below.) adds a set of 10 EA-¼” drive bits and a 1000D Nylon hard-shell case with internal storage for the TUBE and accessories.




Below: Multitasker TUBE in FDE with A2 Four-prong Front Sight Elevation Adjustment Bit.

http://quib.weaponevolution.com/FDE TUBE 2.JPG

Quib
3 October 2010, 16:08
Below: Multitasker TUBE in FDE with Dental Pick installed.

http://quib.weaponevolution.com/FDE TUBE 3.JPG

Quib
3 October 2010, 16:10
Below: Multitasker TUBE in FDE with Carbon Scraper installed.

http://quib.weaponevolution.com/FDE TUBE 4.JPG



Multitasker Tools are available at Brownells. Keep an eye out for the release of the Multitasker TUBE in FDE!

http://http://www.brownells.com/.aspx/cid=0/k=multitasker/t=P/ksubmit=y/Products/All/search=multitasker (http://www.brownells.com/.aspx/cid=0/k=multitasker/t=P/ksubmit=y/Products/All/search=multitasker)





__________________________________________________ __________________________________________________ ___

Quib
28 October 2010, 19:12
http://quib.weaponevolution.com/MTS2.JPG

Quib
29 October 2010, 15:52
http://quib.weaponevolution.com/MTS2 Stock Wrench.JPG

Quib
29 October 2010, 15:54
http://quib.weaponevolution.com/MTS2 FS Tool.JPG

Quib
29 October 2010, 17:58
http://quib.weaponevolution.com/MTS2 1 .5.JPG

Quib
29 October 2010, 17:59
http://quib.weaponevolution.com/MTS2 2.JPG

Quib
29 October 2010, 17:59
http://quib.weaponevolution.com/MTS2 3.JPG

Quib
29 October 2010, 18:00
http://quib.weaponevolution.com/MTS2 4.JPG

Quib
29 October 2010, 18:00
http://img.photobucket.com/albums/v489/Metroliner/MTS2GIF.gif

Quib
20 November 2010, 16:10
http://quib.weaponevolution.com/MTPunch2.JPG

Quib
20 November 2010, 20:14
http://quib.weaponevolution.com/Scraper.JPG

http://quib.weaponevolution.com/Scraper 2.JPG

Quib
4 December 2010, 15:29
http://quib.weaponevolution.com/MT Group 2 W Watermark.jpg

http://quib.weaponevolution.com/MT Tube.JPG

http://quib.weaponevolution.com/MTS2Black.JPG

http://quib.weaponevolution.com/Series 2.JPG

Quib
11 December 2010, 18:13
http://quib.weaponevolution.com/MTS2Woods.JPG

Quib
16 December 2010, 16:54
http://quib.weaponevolution.com/Bolt Override.JPG

Quib
18 December 2010, 06:35
http://http://militarytimes.com/blogs/gearscout/tag/gearscout-gift-guide-2010/ (http://militarytimes.com/blogs/gearscout/tag/gearscout-gift-guide-2010/)