MOUNT-N-SLOT
8 January 2011, 15:45
Impact Weapons Components, LLC announces the release of our 1" LIGHT MOUNT-N-SLOT brand Direct Attach Mount.
http://i998.photobucket.com/albums/af110/mount-n-slot/1%20OD%20LIGHT%20MOUNT-N-SLOT/TRXG2XTOPREAR-resize.jpg
http://i998.photobucket.com/albums/af110/mount-n-slot/1%20OD%20LIGHT%20MOUNT-N-SLOT/TRXG2XTOPSIDE-resize.jpg
PATENT PENDING design mounts directly to:
- TROY TRX/VTAC Extreme
- JPI/VTAC/PRI/YHM/SAMSON/Etc
http://i998.photobucket.com/albums/af110/mount-n-slot/1%20OD%20LIGHT%20MOUNT-N-SLOT/TRXG2XTOPREARA-resize.jpg
PRICE: $34.95 + $3.95 S+H
BUY IT HERE: IMPACT WEAPONS COMPONENTS (http://store.impactweaponscomponents.com/1olimo.html)
http://i998.photobucket.com/albums/af110/mount-n-slot/1%20OD%20LIGHT%20MOUNT-N-SLOT/1LIGHTMOUNTREARSIDEOBL-1.jpg
1" LIGHT MOUNT-N-SLOT by IMPACT WEAPONS COMPONENTS, LLC
• Micro-adjustable 2-piece integral flashlight clamp design adjusts to fit ANY 1” OD flashlight, including SureFire, LLC’s G2X & 6PX series, without the need for rings, spacers or extra hardware or components which can come loose and add weight to your firearm.
• Cantilevered mounting design positions the tail cap switch in front of operator’s support hand thumb without shifting grip on the weapon.
• The unique MOUNT-N-SLOT™ design also increases usable space on your hand guard.
• Direct Attach design allows the operator to mount anywhere through any slot or hole in the hand guard. Does NOT interfere with barrel / gas block.
• 1" O.D. LIGHT MOUNT-N-SLOT™ positions the light tighter to the weapon’s centerline than other designs requiring a 1913 rail mounting system, increasing the operators field of view while reducing the chances to ensnarl your weapon.
• Bezel of the light is positioned far forward of the Front Sight Base and above the barrel, eliminating all shadows or obstructions, providing an uncluttered view of your target during critical low-light situations.
• Ultra-lightweight design weighs only .8 ounces, one-fifth of other systems.
• Ergonomic, low-profile and simple design reduces the number of components, increasing reliability.
• SPEND LESS MONEY: Compare to $50.00 or more for a Mount + a Rail Section + Shipping Charges.
• DIRECT attach design eliminates the need for 2 separate mounts; 1- A Light Mount and 2 - A Picatinny MIL-Spec 1913 Bolt-on Rail Section.
• CNC Machined from 6061-T6 aluminum; Hard anodized Type III matte finish per MIL-A-8625F.
• Easily installation and simple to follow instructions, using the Long Arm Hex Key and a single 10/32” x 1/2” long Flat Head Socket Screw, 10/32” Threaded Backing Plate and Plastic Insertion Tool.
• NO GUNSMITHING - Mounting does not require removal of fore end / hand guard.
• !00% LIFETIME WARRANTY. PERIOD. Return for full refund including your shipping charges.
• MADE IN USA; Including Materials, Tool and Packaging.
• IWC’s MOUNT-N-SLOT products are MADE BY AMERICANS in COLORADO.
Thanks,
MOUNT-N-SLOT
http://i998.photobucket.com/albums/af110/mount-n-slot/1%20OD%20LIGHT%20MOUNT-N-SLOT/TRXG2XTOPREAR-resize.jpg
http://i998.photobucket.com/albums/af110/mount-n-slot/1%20OD%20LIGHT%20MOUNT-N-SLOT/TRXG2XTOPSIDE-resize.jpg
PATENT PENDING design mounts directly to:
- TROY TRX/VTAC Extreme
- JPI/VTAC/PRI/YHM/SAMSON/Etc
http://i998.photobucket.com/albums/af110/mount-n-slot/1%20OD%20LIGHT%20MOUNT-N-SLOT/TRXG2XTOPREARA-resize.jpg
PRICE: $34.95 + $3.95 S+H
BUY IT HERE: IMPACT WEAPONS COMPONENTS (http://store.impactweaponscomponents.com/1olimo.html)
http://i998.photobucket.com/albums/af110/mount-n-slot/1%20OD%20LIGHT%20MOUNT-N-SLOT/1LIGHTMOUNTREARSIDEOBL-1.jpg
1" LIGHT MOUNT-N-SLOT by IMPACT WEAPONS COMPONENTS, LLC
• Micro-adjustable 2-piece integral flashlight clamp design adjusts to fit ANY 1” OD flashlight, including SureFire, LLC’s G2X & 6PX series, without the need for rings, spacers or extra hardware or components which can come loose and add weight to your firearm.
• Cantilevered mounting design positions the tail cap switch in front of operator’s support hand thumb without shifting grip on the weapon.
• The unique MOUNT-N-SLOT™ design also increases usable space on your hand guard.
• Direct Attach design allows the operator to mount anywhere through any slot or hole in the hand guard. Does NOT interfere with barrel / gas block.
• 1" O.D. LIGHT MOUNT-N-SLOT™ positions the light tighter to the weapon’s centerline than other designs requiring a 1913 rail mounting system, increasing the operators field of view while reducing the chances to ensnarl your weapon.
• Bezel of the light is positioned far forward of the Front Sight Base and above the barrel, eliminating all shadows or obstructions, providing an uncluttered view of your target during critical low-light situations.
• Ultra-lightweight design weighs only .8 ounces, one-fifth of other systems.
• Ergonomic, low-profile and simple design reduces the number of components, increasing reliability.
• SPEND LESS MONEY: Compare to $50.00 or more for a Mount + a Rail Section + Shipping Charges.
• DIRECT attach design eliminates the need for 2 separate mounts; 1- A Light Mount and 2 - A Picatinny MIL-Spec 1913 Bolt-on Rail Section.
• CNC Machined from 6061-T6 aluminum; Hard anodized Type III matte finish per MIL-A-8625F.
• Easily installation and simple to follow instructions, using the Long Arm Hex Key and a single 10/32” x 1/2” long Flat Head Socket Screw, 10/32” Threaded Backing Plate and Plastic Insertion Tool.
• NO GUNSMITHING - Mounting does not require removal of fore end / hand guard.
• !00% LIFETIME WARRANTY. PERIOD. Return for full refund including your shipping charges.
• MADE IN USA; Including Materials, Tool and Packaging.
• IWC’s MOUNT-N-SLOT products are MADE BY AMERICANS in COLORADO.
Thanks,
MOUNT-N-SLOT