PDA

View Full Version : NEW Seekins Precision MR-Monolithic uppers



John Hwang
16 November 2011, 23:02
Seekins Precision’s new Modular Rail Monolithic Uppers and Rails. All of the benefits of a monolithic upper receiver with the option of changing rail length is finally here. All MR uppers and rails will be available to ship January 30, 2012. Seekins Precision is starting to take orders now. Dealer inquiries welcome.

Seekins new uppers are built from 7075 billet and the rail mounting points are machined in place retaining the stiffness of a true monolithic upper while allowing the rails to be completely modular. This new upper design is much thicker in the most critical area and will aid in squeezing the potential accuracy out of your rifle. Instead of a internally threaded barrel nut this system uses a externally threaded Titanium barrel nut with 1-1/8” wrench flats on it for simple installation. No special proprietary wrenches needed. These will be available for the two new SP rails below as well as the BAR and SAR rails currently sold thru Spikes Tactical.
MSRP $299

http://album.weaponevolution.com/seekins/a.jpg (http://www.seekinsprecision.com/)

http://album.weaponevolution.com/seekins/b.jpg (http://www.seekinsprecision.com/)

http://album.weaponevolution.com/seekins/c.jpg (http://www.seekinsprecision.com/)

http://album.weaponevolution.com/seekins/d.jpg (http://www.seekinsprecision.com/)



From Seekins Precision:
When I set out to design a modular rail I just couldn’t make up my mind what one I liked best so we did two! Both are completely modular as far as accessory rails. You can have as many as you like, wherever you like, without compromising comfort or weight. Each design will come with one full length top rail, three short rail sections, and all mounting hardware. These rails attach to the tubes with a proprietary fastener system that makes it quick and easy to add or remove rails in the field. The angled slots will also accept a rail section and allow you to place them anywhere you like. These rails will also be available with barrel nuts for attachment to standard uppers. Both designs are the lightest on the market weighing less than 10 ounces for the 14” version without accessory rail attachments!

The round rail was designed to be a very comfortable and light weight rail system that will work in any situation AND allow a suppressor to fit back inside the rail. A custom 12” rail will be available just for suppressor use, designed to make using a quick mounted suppressor easy to install or remove while underneath the rail (such as the AAC or Surefire mount systems). The 12” rail with a 8” barrel and suppressor looks unbelievable. (pics coming soon)

Available in 7,9,12 and 14” lengths MSRP starting at $239


http://album.weaponevolution.com/seekins/e.jpg (http://www.seekinsprecision.com/)

http://album.weaponevolution.com/seekins/f.jpg (http://www.seekinsprecision.com/)

http://album.weaponevolution.com/seekins/g.jpg (http://www.seekinsprecision.com/)


The triangular rail was designed out of necessity from shooting 3 gun and sniper competitions where barricade or improvised shooting positions are frequent. At only 2” wide it fits perfectly into your hand and instantly feels at home. On a barricade, barrel, ledge or window opening the flat surfaces give you a very sturdy rest allowing for faster and more accurate shot placement.

Available in 12” and 14” lengths MSRP starting at $249

http://album.weaponevolution.com/seekins/h.jpg (http://www.seekinsprecision.com/)

http://album.weaponevolution.com/seekins/i.jpg (http://www.seekinsprecision.com/)

http://album.weaponevolution.com/seekins/j.jpg (http://www.seekinsprecision.com/)

TripleBravo
18 November 2011, 19:42
Glen Seekins is coming up with some really innovative designs...

http://i718.photobucket.com/albums/ww189/wjt1169/seekins%20mono%20setups/3gun-TAR-loading01-B3-1024.jpg