PDA

View Full Version : 300 Blackout help



bates
9 January 2012, 19:40
Looking for some help here guys.

here is what i have bushy upper, lower, bcg etc

also have an aac cyclone-k

just need a barrel and rail

want to register the lower and build a 300 blackout

mainly for fun but also for shooting some pigs, will also keep close to the bed to protect the family

any suggestions for a barrel?

consfused with the options as to 8, 9, 9.5 or 10in

also need a rail, strongly considering getting a longer rail that the can fits inside any down side

could i fire a few rounds through this set up, say if i wanted to hunt deer with the can off?

Paulo_Santos
9 January 2012, 21:16
Have you checked out the 300 Blackout Forum? You'll get more help there.

todd.k
10 January 2012, 15:23
I would choose the barrel length based on the OAL or handguard length you prefer. I don't care for the silencer to be in the handguard, it looks cool but in reality it gets hot very fast while shooting and I don't like the feel of the larger diameter handguards.

8" barrel = 7" handguard
10" barrel = 9" handguard

tac40
30 May 2012, 21:19
Look at Noveske for barrels. As for bbl length, my personal choice is the 14.5 or 16.

http://noveskerifleworks.com/cgi-bin/imcart/display.cgi?cat=168

Stickman
31 May 2012, 23:34
I would choose the barrel length based on the OAL or handguard length you prefer.
8" barrel = 7" handguard
10" barrel = 9" handguard


Very very good point, and I agree 100%.