zero7one
15 June 2012, 10:33
Syrac Ordnance Adjustable Gas Blocks:
http://jalbum.net/.private/WEVO/slides/SyracOrdnance01.jpg
Syrac adjustable gas blocks allow you to slow down the speed of your bolt carrier, by reducing the amount of gas flow through your system. A slower bolt carrier decreases the amount of recoil. Less recoil equals faster follow up shots. The gas blocks have two main features: adjustability from the front of the block and multiple adjustment settings by a detent locking mechanism. The block mechanism consists of a set screw and a detent. The block has a set screw that regulates the amount of gas that flows through the block. It can be adjusted repeatedly in the field without the need of using a thread-locker like Loctite. You can regulate the amount of gas flow by unscrewing (opening) and screwing (closing) the set screw. Once you obtain the proper setting, the screw is locked into place by a detent. To adjust the set screw you push in the detent, use a Hex Key to turn the screw to the proper setting, and release the detent. The screw is locked in place by the detent. The screw will not turn (move) until the detent is manually pressed in.
The blocks also have a start hole location flat on one side. This faced off location is to be used to locate an end mill to break through the melonited surface. After you break through the surface you then use a drill to make a hole to pin the block to the barrel if you desire.
We currently have three SKUs:
http://jalbum.net/.private/WEVO/slides/SyracOrdnance02.jpg
.750 Adjustable Low Pro Clamp-On Gas Block
SKU# SO-10002
Cost: $113.20
Description:
This is a low profile adjustable gas block that clamps-on to AR15/AR10 barrels that have a .750 gas pad diameter. The adjustment screw has a detent locking mechanism.
Technical Information:
Material: 416 SS
Finish: Melonite
Barrel Diameter: 0.750
Weight: 1.78 oz.
Length: 1.00
Attachment Type: Clamp-on
Adjustment: Front of Block
http://jalbum.net/.private/WEVO/slides/SyracOrdnance03.jpg
Includes:
Gas Block
(2) 8-32 X 5/16 Socket Head Cap Screws
(2) Gas Tube Roll Pins
(2) 5/64 X 6 L-Shaped Hex Keys
Installation Instructions
http://jalbum.net/.private/WEVO/slides/SyracOrdnance04.jpg
.750 Adjustable Low Pro Gas Block
SKU# SO-10001
Cost: $106.95
Description:
This is a low profile adjustable gas block that fits AR15/AR10 barrels that have a .750 gas pad diameter. The adjustment screw has a detent locking mechanism.
Technical Information:
Material: 416 SS
Finish: Melonite
Barrel Diameter: 0.750
Weight: 1.68 oz.
Length: 1.00
Attachment Type: Set Screws
Adjustment: Front of Block
http://jalbum.net/.private/WEVO/slides/SyracOrdnance05.jpg
Includes:
Gas Block
(2) 10-32 x 1/4" Set Screws
(2) Gas Tube Roll Pins
(2) 5/64 X 6 L-Shaped Hex Keys
Installation Instructions
http://jalbum.net/.private/WEVO/slides/SyracOrdnance06.jpg
.625 Adjustable Low Pro Gas Block
SKU# SO-10005
Cost: $106.95
Description:
This is a low profile adjustable gas block that fits AR15/AR10 barrels that have a .625 gas pad diameter. The adjustment screw has a detent locking mechanism.
Technical Information:
Material: 416 SS
Finish: Melonite
Barrel Diameter: 0.625
Weight: 1.39 oz.
Length: 1.00
Attachment Type: Set Screws
Adjustment: Front of Block
http://jalbum.net/.private/WEVO/slides/SyracOrdnance07.jpg
Includes:
Gas Block
(2) 10-32 x 3/16" Set Screws
(2) Gas Tube Roll Pins
(2) 5/64 X 6 L-Shaped Hex Keys
Installation Instructions
We offer a 15 day money back guarantee if you do not like the product. We offer a 100% life time warranty for material and manufactures defects. Please see our website for the terms of these assurances.
If you are interested in ordering please call us at 727-487-2676 or email us at sales@syracordnance.com
http://jalbum.net/.private/WEVO/slides/SyracOrdnance01.jpg
Syrac adjustable gas blocks allow you to slow down the speed of your bolt carrier, by reducing the amount of gas flow through your system. A slower bolt carrier decreases the amount of recoil. Less recoil equals faster follow up shots. The gas blocks have two main features: adjustability from the front of the block and multiple adjustment settings by a detent locking mechanism. The block mechanism consists of a set screw and a detent. The block has a set screw that regulates the amount of gas that flows through the block. It can be adjusted repeatedly in the field without the need of using a thread-locker like Loctite. You can regulate the amount of gas flow by unscrewing (opening) and screwing (closing) the set screw. Once you obtain the proper setting, the screw is locked into place by a detent. To adjust the set screw you push in the detent, use a Hex Key to turn the screw to the proper setting, and release the detent. The screw is locked in place by the detent. The screw will not turn (move) until the detent is manually pressed in.
The blocks also have a start hole location flat on one side. This faced off location is to be used to locate an end mill to break through the melonited surface. After you break through the surface you then use a drill to make a hole to pin the block to the barrel if you desire.
We currently have three SKUs:
http://jalbum.net/.private/WEVO/slides/SyracOrdnance02.jpg
.750 Adjustable Low Pro Clamp-On Gas Block
SKU# SO-10002
Cost: $113.20
Description:
This is a low profile adjustable gas block that clamps-on to AR15/AR10 barrels that have a .750 gas pad diameter. The adjustment screw has a detent locking mechanism.
Technical Information:
Material: 416 SS
Finish: Melonite
Barrel Diameter: 0.750
Weight: 1.78 oz.
Length: 1.00
Attachment Type: Clamp-on
Adjustment: Front of Block
http://jalbum.net/.private/WEVO/slides/SyracOrdnance03.jpg
Includes:
Gas Block
(2) 8-32 X 5/16 Socket Head Cap Screws
(2) Gas Tube Roll Pins
(2) 5/64 X 6 L-Shaped Hex Keys
Installation Instructions
http://jalbum.net/.private/WEVO/slides/SyracOrdnance04.jpg
.750 Adjustable Low Pro Gas Block
SKU# SO-10001
Cost: $106.95
Description:
This is a low profile adjustable gas block that fits AR15/AR10 barrels that have a .750 gas pad diameter. The adjustment screw has a detent locking mechanism.
Technical Information:
Material: 416 SS
Finish: Melonite
Barrel Diameter: 0.750
Weight: 1.68 oz.
Length: 1.00
Attachment Type: Set Screws
Adjustment: Front of Block
http://jalbum.net/.private/WEVO/slides/SyracOrdnance05.jpg
Includes:
Gas Block
(2) 10-32 x 1/4" Set Screws
(2) Gas Tube Roll Pins
(2) 5/64 X 6 L-Shaped Hex Keys
Installation Instructions
http://jalbum.net/.private/WEVO/slides/SyracOrdnance06.jpg
.625 Adjustable Low Pro Gas Block
SKU# SO-10005
Cost: $106.95
Description:
This is a low profile adjustable gas block that fits AR15/AR10 barrels that have a .625 gas pad diameter. The adjustment screw has a detent locking mechanism.
Technical Information:
Material: 416 SS
Finish: Melonite
Barrel Diameter: 0.625
Weight: 1.39 oz.
Length: 1.00
Attachment Type: Set Screws
Adjustment: Front of Block
http://jalbum.net/.private/WEVO/slides/SyracOrdnance07.jpg
Includes:
Gas Block
(2) 10-32 x 3/16" Set Screws
(2) Gas Tube Roll Pins
(2) 5/64 X 6 L-Shaped Hex Keys
Installation Instructions
We offer a 15 day money back guarantee if you do not like the product. We offer a 100% life time warranty for material and manufactures defects. Please see our website for the terms of these assurances.
If you are interested in ordering please call us at 727-487-2676 or email us at sales@syracordnance.com