PDA

View Full Version : Syrac Ordnance Adjustable Gas Blocks



zero7one
15 June 2012, 10:33
Syrac Ordnance Adjustable Gas Blocks:



http://jalbum.net/.private/WEVO/slides/SyracOrdnance01.jpg

Syrac adjustable gas blocks allow you to slow down the speed of your bolt carrier, by reducing the amount of gas flow through your system. A slower bolt carrier decreases the amount of recoil. Less recoil equals faster follow up shots. The gas blocks have two main features: adjustability from the front of the block and multiple adjustment settings by a detent locking mechanism. The block mechanism consists of a set screw and a detent. The block has a set screw that regulates the amount of gas that flows through the block. It can be adjusted repeatedly in the field without the need of using a thread-locker like Loctite™. You can regulate the amount of gas flow by unscrewing (opening) and screwing (closing) the set screw. Once you obtain the proper setting, the screw is locked into place by a detent. To adjust the set screw you push in the detent, use a Hex Key to turn the screw to the proper setting, and release the detent. The screw is locked in place by the detent. The screw will not turn (move) until the detent is manually pressed in.

The blocks also have a start hole location flat on one side. This faced off location is to be used to locate an end mill to break through the melonited surface. After you break through the surface you then use a drill to make a hole to pin the block to the barrel if you desire.

We currently have three SKUs:

http://jalbum.net/.private/WEVO/slides/SyracOrdnance02.jpg

.750” Adjustable Low Pro Clamp-On Gas Block

SKU# SO-10002

Cost: $113.20

Description:

This is a low profile adjustable gas block that clamps-on to AR15/AR10 barrels that have a .750” gas pad diameter. The adjustment screw has a detent locking mechanism.

Technical Information:

Material: 416 SS
Finish: Melonite
Barrel Diameter: 0.750”
Weight: 1.78 oz.
Length: 1.00”
Attachment Type: Clamp-on
Adjustment: Front of Block

http://jalbum.net/.private/WEVO/slides/SyracOrdnance03.jpg

Includes:

Gas Block
(2) 8-32 X 5/16” Socket Head Cap Screws
(2) Gas Tube Roll Pins
(2) 5/64 X 6” L-Shaped Hex Keys
Installation Instructions

http://jalbum.net/.private/WEVO/slides/SyracOrdnance04.jpg

.750” Adjustable Low Pro Gas Block

SKU# SO-10001

Cost: $106.95

Description:

This is a low profile adjustable gas block that fits AR15/AR10 barrels that have a .750” gas pad diameter. The adjustment screw has a detent locking mechanism.

Technical Information:

Material: 416 SS
Finish: Melonite
Barrel Diameter: 0.750”
Weight: 1.68 oz.
Length: 1.00”
Attachment Type: Set Screws
Adjustment: Front of Block

http://jalbum.net/.private/WEVO/slides/SyracOrdnance05.jpg

Includes:

Gas Block
(2) 10-32 x 1/4" Set Screws
(2) Gas Tube Roll Pins
(2) 5/64 X 6” L-Shaped Hex Keys
Installation Instructions

http://jalbum.net/.private/WEVO/slides/SyracOrdnance06.jpg

.625” Adjustable Low Pro Gas Block

SKU# SO-10005

Cost: $106.95

Description:

This is a low profile adjustable gas block that fits AR15/AR10 barrels that have a .625” gas pad diameter. The adjustment screw has a detent locking mechanism.

Technical Information:

Material: 416 SS
Finish: Melonite
Barrel Diameter: 0.625”
Weight: 1.39 oz.
Length: 1.00”
Attachment Type: Set Screws
Adjustment: Front of Block

http://jalbum.net/.private/WEVO/slides/SyracOrdnance07.jpg

Includes:

Gas Block
(2) 10-32 x 3/16" Set Screws
(2) Gas Tube Roll Pins
(2) 5/64 X 6” L-Shaped Hex Keys
Installation Instructions

We offer a 15 day money back guarantee if you do not like the product. We offer a 100% life time warranty for material and manufactures defects. Please see our website for the terms of these assurances.

If you are interested in ordering please call us at 727-487-2676 or email us at sales@syracordnance.com

UWone77
22 December 2013, 22:21
http://www.youtube.com/watch?v=aDCZttBkUi8

mustangfreek
23 December 2013, 01:14
Um ya ..that was a good video......:P...[:D]....[adore]

voodoo_man
23 December 2013, 02:39
....was there a gas block in that video?

I might have been distracted.

Stickman
23 December 2013, 17:02
....was there a gas block in that video?

I might have been distracted.

I was thinking the same thing... what is this video about again?

voodoo_man
24 December 2013, 16:43
I was thinking the same thing... what is this video about again?

Wait, there's a video?