View Full Version : Glock Photo Gallery
voodoo_man
8 October 2016, 07:56
http://i.imgur.com/YrglTdZ.jpg (http://www.vdmsr.com/2016/10/secrets-deserve-safe-keeping.html)
Pyzik
8 October 2016, 09:20
Not my best shot but there is a glock in there.
https://scontent.fdtw1-1.fna.fbcdn.net/v/t34.0-12/14620094_10157501289470720_1476427446_n.jpg?oh=bb3 a13d7595c09bfd27e44c9818aec31&oe=57FC019A
Former11B
8 October 2016, 10:20
Not my best shot but there is a glock in there.
https://scontent.fdtw1-1.fna.fbcdn.net/v/t34.0-12/14620094_10157501289470720_1476427446_n.jpg?oh=bb3 a13d7595c09bfd27e44c9818aec31&oe=57FC019A
And a big cock
Voodoo, I took one similar to that yesterday...not as good of course
1802
voodoo_man
9 October 2016, 10:37
White tape on the barrel?
Pyzik
9 October 2016, 10:38
White tape on the barrel?
Assuming it's plumbers tape?
Sent from my SM-N910V using Tapatalk
Former11B
9 October 2016, 17:55
Like Pyzik said, it's Teflon tape (my phone autocorrected that to felon tape)
Keeps thread on cans from backing off...just a little cheap insurance
Battle Cock
9 October 2016, 17:57
Like Pyzik said, it's Teflon tape (my phone autocorrected that to felon tape)
Keeps thread on cans from backing off...just a little cheap insurance
How does the Teflon stand up to the heat?
Former11B
9 October 2016, 18:46
How does the Teflon stand up to the heat?
According to DuPont, 620*F is the melting point, but even on centerfire rifle, I've never gotten it so scorchingly hot it's been a gooey mess or anything, and I've done mag dumps on 16" and 18" ARs. I'd be interested to see how hot the threads get versus the blast baffle area of a can
Whenever I remove the suppressor from the host, and I use it Teflon tape on 9mm pistol and 5.56 rifle direct thread cans, the tape has been compressed into the threads and there's usually some amount of carbon blacking, so I use a 9mm bore brush and scrub the old tape off (comes off easily) and put about 1.5 rotations of new tape on. Never had a direct thread suppressor back off while using it, both on 1/2x28 and 13.5x1LH threads
Battle Cock
9 October 2016, 19:09
According to DuPont, 620*F is the melting point, but even on centerfire rifle, I've never gotten it so scorchingly hot it's been a gooey mess or anything, and I've done mag dumps on 16" and 18" ARs. I'd be interested to see how hot the threads get versus the blast baffle area of a can
Whenever I remove the suppressor from the host, and I use it Teflon tape on 9mm pistol and 5.56 rifle direct thread cans, the tape has been compressed into the threads and there's usually some amount of carbon blacking, so I use a 9mm bore brush and scrub the old tape off (comes off easily) and put about 1.5 rotations of new tape on. Never had a direct thread suppressor back off while using it, both on 1/2x28 and 13.5x1LH threads
I think I'll pick some up for retaining my thread protector on my threaded WC barrel. I haven't used it much because I have to retighten it every mag or two.
cjd3
9 October 2016, 20:41
I think I'll pick some up for retaining my thread protector on my threaded WC barrel. I haven't used it much because I have to retighten it every mag or two.
I just found this tape (https://www.fastenal.com/products/details/0453925). Looks like it's good 2600. I just wonder how thick it is.
Pyzik
13 October 2016, 09:31
https://c3.staticflickr.com/9/8549/30006006850_20c4242291_b.jpg (https://flic.kr/p/MHwCrG)
Glocktober (https://flic.kr/p/MHwCrG) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
voodoo_man
17 October 2016, 10:50
http://i.imgur.com/pGtVu0L.jpg (http://www.vdmsr.com/2016/10/g17l.html)
Aragorn
17 October 2016, 10:54
^^^ Love that patch
UWone77
17 October 2016, 19:36
1840
voodoo_man
28 October 2016, 10:36
http://i.imgur.com/K60yhsal.jpg (http://www.vdmsr.com/2016/10/most-dsg-aiwb.html)
UWone77
30 October 2016, 09:34
1922
Axlnut
30 October 2016, 10:06
1922
I wasn't sure what kind of gun that was at first - shouldn't it be more sanded, burned with a soldering iron, milled on, colored?
[:D]
You snuck a barrel in on me! Almost missed it
UWone77
30 October 2016, 13:30
I wasn't sure what kind of gun that was at first - shouldn't it be more sanded, burned with a soldering iron, milled on, colored?
[:D]
You snuck a barrel in on me! Almost missed it
I got too many glocks, only 4 customized ones, the rest are basically stock, which is usually how I prefer them.
Battle Cock
30 October 2016, 14:19
I got too many glocks, only 4 customized ones, the rest are basically stock, which is usually how I prefer them.
You know you're just saving those for me.
MoxyDave
31 October 2016, 11:09
Out of curiosity, why would you change out the barrel on a Glock without going to a threaded one? Glock barrels are pretty outstanding, is it a different caliber or just for looks? Not hatin', just curious.
GOST
31 October 2016, 11:31
Dave some of the guys I know have changed their Glock barrels out because they wanted button rifling to shoot their lead reloads.
UWone77
31 October 2016, 11:40
Out of curiosity, why would you change out the barrel on a Glock without going to a threaded one? Glock barrels are pretty outstanding, is it a different caliber or just for looks? Not hatin', just curious.
100% agree with you. I have other plans for the barrel, just threw it on for a picture.
MoxyDave
31 October 2016, 15:36
Ah, I forgot about the lead bullets thing. And I didn't consider marketing for new products ... thanks guys.
Dstrbdmedic167
31 October 2016, 19:57
1936
mustangfreek
2 November 2016, 00:02
Dave some of the guys I know have changed their Glock barrels out because they wanted button rifling to shoot their lead reloads.
Along with shooting lead and other stuff, tighter chamber/more case support, different twist rate...
But for me a glock isn't a Match shooting sorta pistol so a barrel is cool looking but myself would never throw that money out for one..
UWone77
5 November 2016, 11:07
For clearing your house and stuff...
2006
Axlnut
5 November 2016, 11:46
1936
As beautiful as that is - and it is, I have this irresistible urge to chuck that slide up in the mill and shave a few thousandths from the start of the front serrations back. Or laser engrave "Can you hear me now?" in the pocket milled out there in the middle.
Dstrbdmedic167
5 November 2016, 11:55
As beautiful as that is - and it is, I have this irresistible urge to chuck that slide up in the mill and shave a few thousandths from the start of the front serrations back. Or laser engrave "Can you hear me now?" in the pocket milled out there in the middle.
Yea I feel ya and wish I would have pushed to have them do that as well but it's all good. One of those function over form is what he was pushing.
Sent from my iPhone using Tapatalk
Axlnut
5 November 2016, 12:21
Because Picture thread:
2007
Yea I feel ya and wish I would have pushed to have them do that as well but it's all good. One of those function over form is what he was pushing.
Sent from my iPhone using Tapatalk
I need to start hosting a "Grinds my Gears" blog or thread or video channel..
Obviously I put my perceived overuse of "function over form" into the category of things that get me all worked up.
voodoo_man
22 November 2016, 17:52
The Voodoo_Special
http://i.imgur.com/jJYaLCO.jpg (http://www.vdmsr.com/2016/11/the-voodoospecial.html)
Battle Cock
23 November 2016, 11:30
The Voodoo_Special
http://i.imgur.com/jJYaLCO.jpg (http://www.vdmsr.com/2016/11/the-voodoospecial.html)
How do you like that short comp?
voodoo_man
23 November 2016, 13:48
How do you like that short comp?
Still have to put it through its paces...
voodoo_man
23 November 2016, 14:17
http://i.imgur.com/AFBGNcf.jpg (http://www.vdmsr.com/2016/11/tbrci-glock-micro-comp.html)
schambers
23 November 2016, 16:41
I'm also curious to know how this the comp performs, and if its much louder than a bare muzzle?
voodoo_man
29 November 2016, 10:58
http://i.imgur.com/r6MBVMV.jpg (http://www.vdmsr.com/2016/11/geissele-charging-handle.html)
voodoo_man
2 December 2016, 14:29
http://i.imgur.com/kPF8Fpv.jpg (http://www.vdmsr.com/2016/12/cthulhu-operator.html)
tact
3 December 2016, 08:20
http://uploads.tapatalk-cdn.com/20161203/1c7e9d462965d978517e52e229dca0c0.jpg
Battle Cock
3 December 2016, 09:39
http://i.imgur.com/kPF8Fpv.jpg (http://www.vdmsr.com/2016/12/cthulhu-operator.html)
Cthulhu operates.
voodoo_man
9 December 2016, 14:43
http://i.imgur.com/4ls6spH.jpg (http://www.vdmsr.com/2016/12/voodoospecial.html)
jdhill
10 December 2016, 12:47
2307
voodoo_man
19 December 2016, 09:46
http://i.imgur.com/0knFqQA.jpg (http://www.vdmsr.com/2016/12/tactithulhu-is-tired-of-your-shit.html)
voodoo_man
21 December 2016, 14:10
http://i.imgur.com/UCpLEu5.jpg (http://www.vdmsr.com/2016/12/voodoospecial_21.html)
Battle Cock
21 December 2016, 14:11
http://i.imgur.com/0knFqQA.jpg (http://www.vdmsr.com/2016/12/tactithulhu-is-tired-of-your-shit.html)
Cthulhu operates needs its own photo series.
Sent from my iPhone using Tapatalk
voodoo_man
21 December 2016, 16:27
Cthulhu operates needs its own photo series.
Sent from my iPhone using Tapatalk
I've done a few sets...Gata wait till a good class in moderate temp so I can take the beanie there and get some photos...
Battle Cock
21 December 2016, 16:52
I've done a few sets...Gata wait till a good class in moderate temp so I can take the beanie there and get some photos...
You best watch out though, if it gets popular enough it'll end up as an option in a COD game. [BD]
voodoo_man
28 December 2016, 16:04
You best watch out though, if it gets popular enough it'll end up as an option in a COD game. [BD]
Just remember where it started...
or they better remember...cuz my lawyer will sue them and then some...;)
pic thread
http://i.imgur.com/8sFPxYa.jpg (http://www.vdmsr.com/2016/12/the-gadget.html)
voodoo_man
29 December 2016, 20:19
http://i.imgur.com/NZLYhEG.png (http://www.vdmsr.com/2016/12/moar-gadget.html)
SINNER
29 December 2016, 20:44
http://i.imgur.com/NZLYhEG.png (http://www.vdmsr.com/2016/12/moar-gadget.html)
That's killer.
voodoo_man
30 December 2016, 12:40
That's killer.
Thanks!
pic thread...
http://i.imgur.com/FVRullV.png (http://www.vdmsr.com/2016/12/cthulhu.html)
Axlnut
31 December 2016, 23:30
Just part of a Glock, but a sexy part
2454
GOST
31 December 2016, 23:51
Did you machine the slide or just do the Cerakote?
Axlnut
31 December 2016, 23:54
Did you machine the slide or just do the Cerakote?
I only cerakoted that particular slide - I'm 99% sure it was done by Primary Machine, and is nice clean work.
voodoo_man
2 January 2017, 10:11
http://i.imgur.com/hfU1mj9.png (http://www.vdmsr.com/2017/01/alg-6-second-mount.html)
voodoo_man
4 January 2017, 10:37
http://i.imgur.com/j8NtGJ4.png (http://www.vdmsr.com/2017/01/mastermind-tactics.html)
Thompson
4 January 2017, 18:50
https://c1.staticflickr.com/1/625/31993852391_d3c5b13847_k.jpg (https://flic.kr/p/QKbREF)
GOST
4 January 2017, 19:23
^He likes just the tip^[BD]
Thompson
4 January 2017, 19:30
^He likes just the tip^[BD]
As long as they are Ginger :P
Battle Cock
5 January 2017, 11:04
Another product of collaboration with Axlnut
https://c8.staticflickr.com/1/776/31303858183_3a2089df36_o.jpg (https://flic.kr/p/PGdsqP)Battlecock (https://flic.kr/p/PGdsqP) by Battle Cock (https://www.flickr.com/photos/139563678@N06/), on Flickr
voodoo_man
5 January 2017, 18:32
http://i.imgur.com/BhhkeUR.png (http://www.vdmsr.com/2017/01/the-gadget-ready-for-duty.html)
Stone
5 January 2017, 19:06
http://i.imgur.com/NZLYhEG.png (http://www.vdmsr.com/2016/12/moar-gadget.html)
Who makes that?
GOST
5 January 2017, 19:12
Who makes that?
Tau Development Group - The Gadget
Stone
5 January 2017, 19:22
Thanks Gost!
Axlnut
5 January 2017, 20:17
2478
Dstrbdmedic167
5 January 2017, 20:33
2478
Dude I love that shot and work!
voodoo_man
6 January 2017, 13:18
http://i.imgur.com/AyOnHXu.png (http://www.vdmsr.com/2017/01/blaster.html)
Stone
6 January 2017, 13:20
2478
That looks awesome! Nice work.
Battle Cock
7 January 2017, 11:45
http://uploads.tapatalk-cdn.com/20170107/6d6b9ca56038c0175da2c34c2f628e16.jpg
Joelski
7 January 2017, 13:06
http://uploads.tapatalk-cdn.com/20170107/6d6b9ca56038c0175da2c34c2f628e16.jpg
That's hot. Nicely done! Is that backstrap shaved a bit? Looks like it probably feels as good as it looks!
Battle Cock
7 January 2017, 14:01
That's hot. Nicely done! Is that backstrap shaved a bit? Looks like it probably feels as good as it looks!
It feels better than it looks. The backstrap is reduced a little, but only enough to remove the backstrap texturing.
Joelski
7 January 2017, 21:07
It feels better than it looks. The backstrap is reduced a little, but only enough to remove the backstrap texturing.
Every little bit helps. Tbh, after having my P30, I'm not sure I won't hate the Legion grip, as it has a blocky look to it as well. I love my Glocks, but the grip is as sexy as a brick.
Axlnut
7 January 2017, 21:25
Every little bit helps. Tbh, after having my P30, I'm not sure I won't hate the Legion grip, as it has a blocky look to it as well. I love my Glocks, but the grip is as sexy as a brick.
The Legion is unreal comfortable - and I'm super super picky about grip shape.
Axlnut
7 January 2017, 21:28
Gost - Mr Bone; Thanks gents!
2490
Joelski
8 January 2017, 18:24
The Legion is unreal comfortable - and I'm super super picky about grip shape.
Hoping to try one out next month. If I like it, it'll be coming home with me
voodoo_man
12 January 2017, 11:53
http://i.imgur.com/HHLpv5m.png (http://www.vdmsr.com/2017/01/covert-edc.html)
voodoo_man
13 January 2017, 14:54
http://i.imgur.com/i7CGdz9.png[ (http://www.vdmsr.com/2017/01/striker-control-device.html)
UWone77
15 January 2017, 02:52
2544
voodoo_man
16 January 2017, 14:33
http://i.imgur.com/Gv2SxX6.png (http://www.vdmsr.com/2017/01/voodoo-special-20.html)
Cotton68spc
16 January 2017, 19:31
2544
That is beautiful mind if I borrow it for 25-30 years
Sent from my iPhone using Tapatalk
Dstrbdmedic167
22 January 2017, 08:59
2597
voodoo_man
23 January 2017, 10:49
http://i.imgur.com/vsoGzRE.png (http://www.vdmsr.com/2017/01/dp-customs-and-robar-slide-work.html#more)
voodoo_man
24 January 2017, 16:46
Ameriglo CAP LE Sights
http://i.imgur.com/97gxQxQ.png (http://www.vdmsr.com/2017/01/ameriglo-cap-le.html)
Jerry R
26 January 2017, 11:18
http://www.weaponevolution.com/forum/attachment.php?attachmentid=2620&d=1485458227
Jerry R
26 January 2017, 11:47
http://www.weaponevolution.com/forum/attachment.php?attachmentid=2621&d=1485460005
voodoo_man
28 January 2017, 09:53
http://i.imgur.com/jZLNJ4f.png (http://www.vdmsr.com/2017/01/tools.html)
voodoo_man
30 January 2017, 13:32
http://i.imgur.com/4gpX7Se.png (http://www.vdmsr.com/2017/01/the-roland-special.html)
Dstrbdmedic167
30 January 2017, 19:40
2672
GriffonSec
31 January 2017, 13:27
Finally dragged into Glock ownership:
https://c1.staticflickr.com/1/750/32635571125_4f0b3ef09a_b.jpg (https://flic.kr/p/RHTQhM)Glock 42 1 (1 of 1) (https://flic.kr/p/RHTQhM) by Steven Ragan (https://www.flickr.com/photos/111961163@N05/), on Flickr
UWone77
31 January 2017, 18:30
2678
UWone77
6 February 2017, 02:29
2710
Pyzik
6 February 2017, 05:52
2710
Wow. That looks like a fun pair.
Waiting for the dual wielding video....
Joelski
6 February 2017, 17:17
The want is strong with this one...
Calling Axlnut and Battlecock!https://uploads.tapatalk-cdn.com/20170207/b0744e6f6f4d0001462b0df14ddbdc88.jpg
GriffonSec
12 February 2017, 10:59
Got the Overwatch TAC trigger installed:
https://c1.staticflickr.com/1/618/32822669776_61a91770b8_b.jpg (https://flic.kr/p/S1qLcA)G42 Overwatch 1 (1 of 1) (https://flic.kr/p/S1qLcA) by Steven Ragan (https://www.flickr.com/photos/111961163@N05/), on Flickr
voodoo_man
14 February 2017, 12:33
http://i.imgur.com/4bCWjQq.png (http://www.vdmsr.com/2017/02/tactithulhu-goes-john-wick.html)
GriffonSec
14 February 2017, 15:27
Considering ALL of my Colts have Cthulhu medallions in the grips, I need that mask............Not to mention one watch with Cthulhu caseback art I helped work on.
Great shots Voodoo!
Battle Cock
14 February 2017, 19:36
https://uploads.tapatalk-cdn.com/20170215/4ad4c9c0f6f96e3b5f0bd09cca03d85f.jpg
Fishnet has come a long way since my first try.
voodoo_man
16 February 2017, 12:45
http://i.imgur.com/ZNQv7y4.png (http://www.vdmsr.com/2017/02/magpul-g26-magazine.html)
http://i.imgur.com/jsH13wj.png (http://www.vdmsr.com/2017/02/magpul-g26-magazine.html)
Battle Cock
17 February 2017, 13:42
https://uploads.tapatalk-cdn.com/20170217/4193ba745c07aae5d34786eb08af8ddf.jpg
Not perfectly in focus, but I like the shot anyway.
tact
17 February 2017, 13:52
https://uploads.tapatalk-cdn.com/20170217/4193ba745c07aae5d34786eb08af8ddf.jpg
Not perfectly in focus, but I like the shot anyway.
FFL?
Battle Cock
17 February 2017, 13:52
FFL?
Working at one. So, yes. Finally.
voodoo_man
20 February 2017, 08:58
http://i.imgur.com/t7RX3vR.png (http://www.vdmsr.com/2017/02/niche-edc.html)
voodoo_man
21 February 2017, 09:03
http://i.imgur.com/IpKbGXo.png (http://www.vdmsr.com/2017/02/voodoospecial-with-friend.html)
voodoo_man
28 February 2017, 08:56
http://i.imgur.com/uZ8SNhW.png (http://www.vdmsr.com/2017/02/jm-custom-kydex-aiwb-wing-claw-25.html)
Cotton68spc
28 February 2017, 17:12
http://i.imgur.com/uZ8SNhW.png (http://www.vdmsr.com/2017/02/jm-custom-kydex-aiwb-wing-claw-25.html)
Ok stupid question what's the black piece on bottom of holster
Sent from my iPhone using Tapatalk
GOST
28 February 2017, 17:47
Ok stupid question what's the black piece on bottom of holster
It presses against the pants to push the grip closer to you so that it will print less.
Battle Cock
28 February 2017, 18:38
https://c1.staticflickr.com/4/3776/33179717465_ee4df33720_b.jpg (https://flic.kr/p/SxYJ3e)Battlecock (https://flic.kr/p/SxYJ3e) by Battle Cock (https://www.flickr.com/photos/139563678@N06/), on Flickr
UWone77
28 February 2017, 19:13
I don't see my frame yet. [:D]
GOST
28 February 2017, 20:04
I don't see my frame yet. [:D]
I found it.
2816
Battle Cock
28 February 2017, 20:07
I don't see my frame yet. [:D]
I do. I saw it this morning. I'm thinking I'll fly Josh.S in for some of his legendary stipple stick man artwork.
UWone77
28 February 2017, 20:13
I found it.
2816
I don't let Chris Tran do my stipple work. [crazy]
Battle Cock
28 February 2017, 20:15
I don't let Chris Tran do my stipple work. [crazy]
By the look of that frame I'd imagine that bottle would have been more empty but the end of the stipple job.
apmcdaniel
28 February 2017, 22:04
https://uploads.tapatalk-cdn.com/20170301/aab6ffebd428031b65d238f933b5799d.jpg
100% Non-Glock "Glock" [emoji41]
All parts fit Glock pistols
LoneWolf TimberWolf frame
Zev G34 Frame w/RMR cutout
WilsonCombat G34 barrel
Trijicon HD sights
McNally Custom trigger
All small parts from LoneWolf
Sent from my iPhone using Tapatalk
UWone77
1 March 2017, 01:16
https://uploads.tapatalk-cdn.com/20170301/aab6ffebd428031b65d238f933b5799d.jpg
100% Non-Glock "Glock" [emoji41]
All parts fit Glock pistols
LoneWolf TimberWolf frame
Zev G34 Frame w/RMR cutout
WilsonCombat G34 barrel
Trijicon HD sights
McNally Custom trigger
All small parts from LoneWolf
Sent from my iPhone using Tapatalk
Very nice. I like it.... then again I like all things ZEV!
UWone77
1 March 2017, 16:24
2818
Battle Cock
1 March 2017, 19:35
https://uploads.tapatalk-cdn.com/20170301/aab6ffebd428031b65d238f933b5799d.jpg
100% Non-Glock "Glock" [emoji41]
All parts fit Glock pistols
LoneWolf TimberWolf frame
Zev G34 Frame w/RMR cutout
WilsonCombat G34 barrel
Trijicon HD sights
McNally Custom trigger
All small parts from LoneWolf
Sent from my iPhone using Tapatalk
I happen to know a guy who stipples and I know he wants to do another LW frame. [BD]
Battle Cock
2 March 2017, 17:02
https://c1.staticflickr.com/1/678/33137677856_48b34291a4_b.jpg (https://flic.kr/p/Sugg8o)DSC_0036 (https://flic.kr/p/Sugg8o) by Battle Cock (https://www.flickr.com/photos/139563678@N06/), on Flickr
I do not condone use of these mag releases... they snag on everything.
voodoo_man
3 March 2017, 12:12
http://i.imgur.com/DnPfKKJ.png (http://www.vdmsr.com/2017/03/rs-goes-for-walk.html)
gatordev
3 March 2017, 15:25
Careful. I hear those things will shoot your buddy's leg off.
Too soon?
voodoo_man
3 March 2017, 17:47
Careful. I hear those things will shoot your buddy's leg off.
Too soon?
....Low blow?
Joelski
4 March 2017, 06:30
I can't do appy holsters. I'm terrified of "Glock Dick".
UWone77
6 March 2017, 01:06
2835
Stickman
8 March 2017, 05:43
https://c1.staticflickr.com/1/713/31598516583_a5e814d93c_b.jpg (https://flic.kr/p/Q9fE74)Stickman (https://flic.kr/p/Q9fE74) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
Battle Cock
9 March 2017, 18:29
2835
I see your Zev G17, and raise you your G17 with ZEV.
https://uploads.tapatalk-cdn.com/20170310/9be3b2a1eddf6602b5df526bcde2911e.jpg
UWone77
10 March 2017, 19:56
2858
WarEagle
11 March 2017, 04:57
https://c1.staticflickr.com/4/3728/33039298912_f1d68233d4_b.jpg
https://c1.staticflickr.com/4/3807/33091906222_fbb9dae0d5_b.jpg
UWone77
11 March 2017, 22:51
Did you just have Fowler do a slide for you? Don't recognize the stippling... Nice gun though!
Battle Cock
11 March 2017, 22:56
Did you just have Fowler do a slide for you? Don't recognize the stippling... Nice gun though!
It's LWS Covert work if I'm not mistaken.
WarEagle
12 March 2017, 06:32
Did you just have Fowler do a slide for you? Don't recognize the stippling... Nice gun though!
Thanks
Yep Fowler slide, and Landers Weapon Solutions Covert stippling.
Sent from my iPhone using Tapatalk
UWone77
14 March 2017, 15:27
Another Rainy PNW Afternoon...
2900
voodoo_man
15 March 2017, 12:57
http://i.imgur.com/J7cfGas.png (http://www.vdmsr.com/2017/03/striker-control-device.html)
voodoo_man
16 March 2017, 13:05
http://i.imgur.com/EK6C4KI.png (http://www.vdmsr.com/2017/03/sunset-for-voodoospecial-20.html)
Aragorn
16 March 2017, 13:07
http://i.imgur.com/EK6C4KI.png (http://www.vdmsr.com/2017/03/sunset-for-voodoospecial-20.html)
^^^Voodoo's eHarmony profile pic.
voodoo_man
16 March 2017, 15:30
^^^Voodoo's eHarmony profile pic.
I like long walks on the beach, at sunset or sunrise, doesn't really matter which one. I'm also very long and very accurate.
voodoo_man
21 March 2017, 09:39
http://i.imgur.com/2FKfTxe.png (http://www.vdmsr.com/2017/03/glocks.html)
UWone77
23 March 2017, 05:49
2994
voodoo_man
28 March 2017, 09:12
http://i.imgur.com/00ydluU.png (http://www.vdmsr.com/2017/03/niche-edc.html)
BlackJack1Actual
29 March 2017, 13:48
https://uploads.tapatalk-cdn.com/20170329/8997c067d3ff1069bc9ada168e13619e.jpg
Sent from my SM-G920V using Tapatalk
UWone77
5 April 2017, 14:17
3073
FortTom
5 April 2017, 16:48
3073
UW, do you have trouble finding holsters for stuff like this. Also, though I'm not sure, I believe the attachment is for contact shots? Without throwing the picture thread off topic, could you give a short briefing on that?
Thanks,
FT;)
voodoo_man
6 April 2017, 07:57
3073
Lawl stahp.
UWone77
9 April 2017, 05:20
UW, do you have trouble finding holsters for stuff like this. Also, though I'm not sure, I believe the attachment is for contact shots? Without throwing the picture thread off topic, could you give a short briefing on that?
Thanks,
FT;)
I replied to you PM, but yes, this is to keep the gun in battery on contact shots. Niche product for sure. Dark Hour Defense is run by Chris Quigley, formerly of SMOS and he asked me to try out the SEAX (which is what he's calling it) He's working with a friend of his to do holsters. There will be another version very soon to keep the rail for lights as well as a G17 version.
3106
voodoo_man
15 April 2017, 10:13
http://i.imgur.com/MqO3pb8.png (http://www.vdmsr.com/2017/04/inequality-at-its-finest.html)
voodoo_man
28 April 2017, 08:25
http://i.imgur.com/b70vPiI.png (http://www.vdmsr.com/2017/04/floating-stuff.html)
UWone77
30 April 2017, 00:59
3241
Stickman
1 May 2017, 00:32
3241
I need a 43 in my life.
voodoo_man
1 May 2017, 09:21
http://i.imgur.com/VFtnmlL.png (http://www.vdmsr.com/2017/05/roland.html)
I need a 43 in my life.
Why not? You have 43 of everything else! [:D]
voodoo_man
10 May 2017, 09:35
http://i.imgur.com/23wqVTX.png (http://www.vdmsr.com/2017/05/kit.html)
Dstrbdmedic167
13 May 2017, 13:17
Yea This just happened! I'll share a few with wevo before I post elsewhere.
3339
3340
3341
3342
mustangfreek
13 May 2017, 21:49
Nice..
that will look good In the battlecock frame build
Dstrbdmedic167
25 May 2017, 10:56
Rainier Arms Gen 4 M.A.R.S
3422
3423
FortTom
25 May 2017, 13:49
Let us know in the review section how those go for you. I was thinking of popping for a set, but that right side "paddle" looks like it could easily hit your holster, especially under duress, and send your mag and ammo flying. Looking forward to an unbiased review.
FT[:D]
voodoo_man
26 May 2017, 07:00
Rainier Arms Gen 4 M.A.R.S
3422
3423
https://cdn.meme.am/cache/instances/folder880/500x/78059880/sophisticated-cat-i-should-buy-one-these.jpg
https://uploads.tapatalk-cdn.com/20170526/1b6a10c55e63e8e81fe384fa3b08391e.jpg
How do you like the SI Comp?
Dstrbdmedic167
27 May 2017, 09:41
3472
3472
Rumor has it some M&P barrels are coming.... hmm!
Sent from my SM-G930V using Tapatalk
Dstrbdmedic167
27 May 2017, 10:31
Rumor has it some M&P barrels are coming.... hmm!
Sent from my SM-G930V using Tapatalk
http://i.imgur.com/JWwgeX1.gif
How do you like the SI Comp?
I haven't had a chance to shoot it yet... will report after a fair amount of testing or perhaps VDM will jump on it.
voodoo_man
31 May 2017, 09:07
http://i.imgur.com/CLyFHpi.png (http://www.vdmsr.com/2017/05/glocks.html)
Dstrbdmedic167
1 June 2017, 19:41
3542
Dstrbdmedic167
6 June 2017, 20:27
https://uploads.tapatalk-cdn.com/20170607/615cbd64cf563892f83d36e482f48a93.jpg
UWone77
7 June 2017, 20:17
Rumor has it some M&P barrels are coming.... hmm!
Sent from my SM-G930V using Tapatalk
I think they're running behind schedule on those. I thought they would have already been released.
Dstrbdmedic167
8 June 2017, 07:20
That new Battle Cock Treatment!
https://uploads.tapatalk-cdn.com/20170608/c658bb996f7a050ecdb4c7e214d5d27f.jpg
That new Battle Cock Treatment!
https://uploads.tapatalk-cdn.com/20170608/c658bb996f7a050ecdb4c7e214d5d27f.jpg
Drool. Love how that pistol has turned out
Plan on upgrading sights?
Sent from my SM-G930V using Tapatalk
Dstrbdmedic167
8 June 2017, 07:25
Drool. Love how that pistol has turned out
Plan on upgrading sights?
Sent from my SM-G930V using Tapatalk
Thanks and To what? It's got trijicon night sights now.
Sent from my iPhone using Tapatalk
Thanks and To what? It's got trijicon night sights now.
Sent from my iPhone using Tapatalk
Doh, looked like standard. Carry on.
Sent from my SM-G930V using Tapatalk
Dstrbdmedic167
8 June 2017, 07:27
Doh, looked like standard. Carry on.
Sent from my SM-G930V using Tapatalk
All good. That's why I was like uhhh... lol
Sent from my iPhone using Tapatalk
That new Battle Cock Treatment!
https://uploads.tapatalk-cdn.com/20170608/c658bb996f7a050ecdb4c7e214d5d27f.jpg
Very nice, is she gonna get a TLR-6?
Dstrbdmedic167
8 June 2017, 11:16
Very nice, is she gonna get a TLR-6?
Not right now. I just picked up a vanguard 2 for it which isn't compatible with a light iirc. Curious to see how that works be my infinity Holster from Jason.
Sent from my iPhone using Tapatalk
UWone77
8 June 2017, 12:24
Awesome BC stippling as usual...
But the 90's called. Want their Key Fobs back.[:D]
Dstrbdmedic167
8 June 2017, 12:41
Awesome BC stippling as usual...
But the 90's called. Want their Key Fobs back.[:D]
Meh not all of us can pay cash for a new Beamer... us peasants are stuck with 2WD Chevy's.
Sent from my iPhone using Tapatalk
Battle Cock
10 June 2017, 19:41
Awesome BC stippling as usual...
But the 90's called. Want their Key Fobs back.[:D]
My keyfobs are late 2000's but my steering wheel looks better in photos. https://uploads.tapatalk-cdn.com/20170611/773963e35ad3ccdb3a429d69715b0bc1.jpg
UWone77
11 June 2017, 08:33
3629
All that goodness and a stock recoil spring? That was the first thing I swapped out on my 17.:P
UWone77
11 June 2017, 09:10
All that goodness and a stock recoil spring? That was the first thing I swapped out on my 17.:P
Ha... shoots just fine for my tastes. [:D]
iflyskyhigh
11 June 2017, 10:38
My keyfobs are late 2000's but my steering wheel looks better in photos. https://uploads.tapatalk-cdn.com/20170611/773963e35ad3ccdb3a429d69715b0bc1.jpg
I hope that's an unloaded gun pointing at your man business [emoji50]
Sent from my iPhone using Tapatalk
UWone77
12 June 2017, 17:59
3641
Stickman
13 June 2017, 19:57
3646
gatordev
18 June 2017, 14:00
https://c1.staticflickr.com/5/4202/35003395030_ce18deb6ff_b.jpg
voodoo_man
19 June 2017, 09:05
http://i.imgur.com/8V97Ytv.jpg (http://www.vdmsr.com/2017/06/gadget-bold-sights.html)
voodoo_man
30 June 2017, 20:03
https://4.bp.blogspot.com/x2pyB5Y42RQUYPWeS3RO-NWGRV1TB0alJhWouPjEvVTEUkDneyg9Ja02ebUDCI2uooYvdC-ssCUA7PRLKQxGUsZ2lV6HX7ErbYoujJJe8J_w7pn092VSYivBD iaqV9ptUWIFU03hkc3PBjrS0coGKhKV-E5QxD9xWDd6YnLgz_9AD4aSoVEypaGcEJ1C55HxoneDntePcxB JDrxxSlRb6xa1tjJBPFAPA1s0U9zqymAT5MV34KeNDR0DuSUNu 9kP8Dy5ETpvz8zDKI5VHkqAV6HOLngRh224Oih--xTimptg2ca3nhvNQoxgupBsXLD9xsFMaQ1PmxJIjRDb6EXDhmk 3P3wzILBB2jjOZSOFiRjlXx-K10G6vKC_v8VRl25Xcorf88RHLuWirhlb209Of_HsKMMXSoroB rbdj-75NePC_AR8lrD-BYzpjAJ2243H6tlPG1eXkKkvlFcTt5UbCkOkITbVdxPwboEQDM GjyegijAFpjNX5GNhVtFLJra0cF8t72VUMASFmAwtLxlLhPwMQ bV6VV2LlOFLM9_1YmcNbcjv5WjIgBi_CEY-1PAfxgQcjE9PXSBx7-qMQhRVeRPXIaKK6zoKuUHkqFCqcNXKu6iYtBMTX=w1079-h800-no (http://www.vdmsr.com/2017/06/give-me-liberty-or-give-me-death.html)
UWone77
6 July 2017, 04:02
3819
0uTkAsT
6 July 2017, 13:24
http://i.imgur.com/hA5j838.jpg
voodoo_man
6 July 2017, 16:57
http://i.imgur.com/PbjqiFy.jpg (http://www.vdmsr.com/2017/07/sexy-curves.html)
0uTkAsT
6 July 2017, 17:17
http://i.imgur.com/PbjqiFy.jpg (http://www.vdmsr.com/2017/07/sexy-curves.html)
Is that a GL21 in a 19 frame? I always wondered how far they'd protrude.
voodoo_man
7 July 2017, 08:49
Is that a GL21 in a 19 frame? I always wondered how far they'd protrude.
G19L.
voodoo_man
12 July 2017, 12:37
http://i.imgur.com/gnr1cgQ.jpg (http://www.vdmsr.com/2017/07/glock-43-ameriglo-sights.html)
Joelski
12 July 2017, 14:44
http://i.imgur.com/8V97Ytv.jpg (http://www.vdmsr.com/2017/06/gadget-bold-sights.html)
I see you're a dust farmer of repute equal to my own mad skillz. We are rich!
voodoo_man
13 July 2017, 13:08
http://i.imgur.com/gEN3WGr.jpg (http://www.vdmsr.com/2017/07/dat-g19l-doe.html)
0uTkAsT
13 July 2017, 14:04
I see you're a dust farmer of repute equal to my own mad skillz. We are rich!
I invite you to my house, where I am literally surrounded by 16+ miles of open desert in every direction. You have not seen dust until you have been here. [BD]
Thompson
13 July 2017, 15:37
... wonder who stippled that Glock.
https://farm5.staticflickr.com/4230/35865066906_370ffaf891_b.jpg (https://flic.kr/p/WDgQSw)
Sak007
13 July 2017, 20:15
http://i.imgur.com/gEN3WGr.jpg (http://www.vdmsr.com/2017/07/dat-g19l-doe.html)
What magwell is that ?
voodoo_man
14 July 2017, 06:55
What magwell is that ?
zev magwell pro plus
UWone77
14 July 2017, 07:03
... wonder who stippled that Glock.
https://farm5.staticflickr.com/4230/35865066906_370ffaf891_b.jpg (https://flic.kr/p/WDgQSw)
That is one ugly dude.
voodoo_man
18 July 2017, 09:11
http://i.imgur.com/lKhlI0d.jpg (http://www.vdmsr.com/2017/07/blaster.html)
https://farm5.staticflickr.com/4309/36008033605_290d95f1d5_c.jpg (https://flic.kr/p/WRUzTB)
ATEi A9 (https://flic.kr/p/WRUzTB) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
voodoo_man
24 July 2017, 09:12
http://i.imgur.com/Rrtg5u7.jpg (http://www.vdmsr.com/2017/07/retention-position.html)
voodoo_man
25 July 2017, 11:34
http://i.imgur.com/Yl6z2J4.jpg (http://www.vdmsr.com/2017/07/blaster_25.html)
UWone77
30 July 2017, 23:08
3948
3948
All these TiN barrels.... Looking forward to seeing Blacklist hit the market with some M&P barrels.
Slippers
31 July 2017, 06:45
All these TiN barrels.... Looking forward to seeing Blacklist hit the market with some M&P barrels.
You wanting to get your bling bling on? [:)]
You wanting to get your bling bling on? [:)]Gotta keep up with the Jones'.
'Course, I don't have holes in my slide though. [BD]
Sent from my SM-G930V using Tapatalk
Dstrbdmedic167
31 July 2017, 16:15
All these TiN barrels.... Looking forward to seeing Blacklist hit the market with some M&P barrels.
It would be nice to see some M&P options. That barrel is a L2D combat barrel. They make some awesome stuff. Can't wait for them to ship me mine. They ran out of parts at the show.
Sent from my iPhone using Tapatalk
UWone77
31 July 2017, 17:01
Gotta keep up with the James'
'Course, I don't have holes in my slide though. [BD]
Sent from my SM-G930V using Tapatalk
Fixed it for you.
Fixed it for you.True too
Sent from my SM-G930V using Tapatalk
voodoo_man
1 August 2017, 11:33
http://i.imgur.com/S2hIuS6.jpg (http://www.vdmsr.com/2017/08/twos-crowd.html)
Dstrbdmedic167
3 August 2017, 07:42
https://uploads.tapatalk-cdn.com/20170803/5d43347c5912a8103a52f1591e9b655a.jpg
Battle Cock
7 August 2017, 07:45
https://uploads.tapatalk-cdn.com/20170807/2b31f433e5d8501b9887ef61dd903577.jpg
Pyzik
7 August 2017, 08:22
https://uploads.tapatalk-cdn.com/20170807/2b31f433e5d8501b9887ef61dd903577.jpg
Hawt.
3985
UWone77
8 August 2017, 10:24
3986
Dstrbdmedic167
9 August 2017, 18:17
Got my hands on my buddies while waiting for mine to come in!
3997
UWone77
9 August 2017, 18:44
Got my hands on my buddies while waiting for mine to come in!
3997
I like it. Tungsten/Gray Non-window G17 will be my next slide.
Dstrbdmedic167
9 August 2017, 18:49
Nice! That'll look sweet!
Sent from my iPhone using Tapatalk
UWone77
10 August 2017, 11:04
4001
Battle Cock
10 August 2017, 15:38
https://uploads.tapatalk-cdn.com/20170810/df7d50d609815bad998c6c8ec16ff211.jpg
Aragorn
10 August 2017, 15:45
https://uploads.tapatalk-cdn.com/20170810/df7d50d609815bad998c6c8ec16ff211.jpg
Whoa. Awesome.
Pyzik
10 August 2017, 16:08
https://uploads.tapatalk-cdn.com/20170810/df7d50d609815bad998c6c8ec16ff211.jpgDayum
Sent from my SM-G930V using Tapatalk
UWone77
14 August 2017, 04:05
4015
voodoo_man
20 August 2017, 09:20
http://i.imgur.com/JHR0u3T.jpg (http://www.vdmsr.com/2017/08/glock-19s.html)
voodoo_man
23 August 2017, 09:40
http://i.imgur.com/EAWvBll.jpg (http://www.vdmsr.com/2017/08/reduced-travel-scd-g19l-unity.html)
UWone77
27 August 2017, 17:12
4105
ChattanoogaPhil
29 August 2017, 12:26
http://i.imgur.com/N8qZYOF.jpg
Dstrbdmedic167
29 August 2017, 19:08
4123
GOST
29 August 2017, 19:54
I hear there is a VERY sexy Glock that a Mr. Pyzik is going to be taking pics of soon.[:D]
UWone77
30 August 2017, 18:33
4123
Any word on when your order is coming?
Dstrbdmedic167
30 August 2017, 18:34
Any word on when your order is coming?
Nope I called one time and they said they were working on it and would call me when it was ready... haven't heard from them since.
Sent from my iPhone using Tapatalk
gatordev
1 September 2017, 13:55
https://farm5.staticflickr.com/4374/36157462323_54c0fafca8_b.jpg
Battle Cock
1 September 2017, 17:05
Those L2D slides are sharp, but I'm steadily feeling a need for more Agency slide work in my life. https://uploads.tapatalk-cdn.com/20170902/6278c834095d1a2e8eb53f38fe81ecb7.jpg
UWone77
2 September 2017, 14:38
4151
Axlnut
2 September 2017, 20:09
4153
Dstrbdmedic167
4 September 2017, 07:53
4153
I love it! Congrats on you guys making Tacsoup as well lol
Sent from my iPhone using Tapatalk
voodoo_man
15 September 2017, 08:36
Battle Cock Tactical modified Glock.
https://i.imgur.com/Tg36cPG.jpg (http://www.vdmsr.com/2017/09/battle-cock-tactical.html)
GOST
15 September 2017, 09:42
You shot it yet?
UWone77
16 September 2017, 04:07
4244
Dstrbdmedic167
17 September 2017, 10:50
4248
Dstrbdmedic167
18 September 2017, 18:15
4255
apmcdaniel
19 September 2017, 22:20
https://uploads.tapatalk-cdn.com/20170920/cc7233cdf92f0807a32684a0241e052e.jpg
Serial filter abuser. [emoji6]
Sent from my iPhone using Tapatalk
UWone77
23 September 2017, 21:02
4280
UWone77
28 September 2017, 21:03
Aero/GGP Slide. Bought it stripped so it still needs sights, and a RMR Plate.
4303
Dstrbdmedic167
29 September 2017, 06:56
https://uploads.tapatalk-cdn.com/20170929/606589d0316ff47dc61d7cb5d7788b15.jpg
Joelski
29 September 2017, 11:41
I am seriously fighting the urge to snag an OD 19. Hard to beat a $399 blue label deal.
https://www.sportsmansoutdoorsuperstore.com/prodimages/39431-DEFAULT-l.jpg
UWone77
30 September 2017, 04:05
4319
Dstrbdmedic167
30 September 2017, 20:15
4322
UWone77
2 October 2017, 04:05
4328
Dstrbdmedic167
2 October 2017, 08:54
4330
voodoo_man
6 October 2017, 06:28
https://i.imgur.com/CKeq6OJ.jpg (http://www.vdmsr.com/2017/10/gen4-glock-19.html)
UWone77
9 October 2017, 04:05
4370
voodoo_man
11 October 2017, 10:15
https://i.imgur.com/lgJNyiY.jpg (http://www.vdmsr.com/2017/10/edc.html)
Dstrbdmedic167
12 October 2017, 08:13
Does this go here? Close enough...
4379
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.