PDA

View Full Version : Knight's Armament Photo Gallery



zero7one
12 September 2012, 10:01
Post your Knight's Armament photos here:

http://farm9.staticflickr.com/8147/7288197784_5f135bd7b7_b.jpg

tac40
15 September 2012, 11:25
http://i659.photobucket.com/albums/uu319/horseplay/SHOT%20show%202010%20Las%20Vegas/MrKnight.jpg


Mr Knight at SHOT

tac40
15 September 2012, 11:27
http://i659.photobucket.com/albums/uu319/horseplay/SHOT%20show%202010%20Las%20Vegas/Knight.jpg

Trey Knight showing off a nice kit from KAC

Stickman
15 September 2012, 12:21
http://stickman.rainierarms.com/galleries/KAC/IMG_9526%201028%20Stick.jpg

Stickman
15 September 2012, 12:22
http://stickman.rainierarms.com/galleries/KAC/IMG_2136%201028%20WEVO.jpg

Stickman
15 September 2012, 12:22
http://stickman.rainierarms.com/galleries/KAC/IMG_0074%201028%20WEVO.jpg

larryboypa
20 January 2013, 18:12
This is one of my favorite threads on here haha.

clark213
23 February 2013, 11:18
I apologize for the lack of quality, I'm not a photographer. I don't even own a quality camera. These were taken with my cell phone, I just wanted to contribute.

SR-15 with Trijicon TA31H and AAC SPR/M4 can. Pistol is Nighthawk Custom AAC 1911.
http://flic.kr/p/dXf1fQ

My new LPR.
http://flic.kr/p/dXf16E

clark213
4 June 2013, 19:21
Crappy cell phone pic...

http://farm6.staticflickr.com/5348/8955142146_55fd270d60.jpg (http://www.flickr.com/photos/93498256@N04/8955142146/)
KAC LPR (http://www.flickr.com/photos/93498256@N04/8955142146/) by 213clark (http://www.flickr.com/people/93498256@N04/), on Flickr

gatordev
20 January 2014, 16:59
I always forget my SLR when I go to the desert... So my 5s will have to fill in, although apparently I cut off the barrel.

http://i840.photobucket.com/albums/zz322/gatordev/SR-15side_zpsfb1abb56.jpg

http://i840.photobucket.com/albums/zz322/gatordev/SR-15leftSide_zps91a10de9.jpg

gatordev
20 January 2014, 17:08
Uno mas...

http://i840.photobucket.com/albums/zz322/gatordev/SR-15frontQuarter_zps41df5eb1.jpg

gatordev
11 August 2015, 13:25
http://i840.photobucket.com/albums/zz322/gatordev/Public%20pics/SOCOM%20Family%20Pics/IMG_0485_zpsvcblyehh.jpg

gatordev
30 April 2016, 11:32
https://farm2.staticflickr.com/1473/26113637603_0344f9e3ba_c.jpg

TripleBravo
7 May 2016, 22:58
https://farm2.staticflickr.com/1501/23392508544_85955eba41_o.jpg (https://flic.kr/p/BD7HNQ)Redback One (https://flic.kr/p/BD7HNQ) by Triple Bravo (https://www.flickr.com/photos/triplebravo/), on Flickr

voodoo_man
8 May 2016, 04:34
Wtf...now I need more knights stuff

UWone77
12 May 2016, 19:19
1146

EO3
12 May 2016, 19:39
Nice shot. This isn't helping my urge at all to get a KAC rifle!

Josh S.
12 May 2016, 20:34
Nice shot. This isn't helping my urge at all to get a KAC rifle!

M110? [BD]

EO3
12 May 2016, 23:11
M110? [BD]

Right... I think I'll start out with a KAC trigger guard... and maybe a thumb rest. That counts, right? LOL

Joelski
13 May 2016, 05:42
Right... I think I'll start out with a KAC trigger guard... and maybe a thumb rest. That counts, right? LOL

I got a battery cap. I feel so op now. [:D]

UWone77
13 May 2016, 18:04
1151

Josh S.
13 May 2016, 19:03
1151

Look at that boring ol' rail panel! That thing needs some plastic surgery... ;)

Btw, does that panel lock into place right there? Usually the locking slots are at the ends but I'm curious if KAC rails have more than two points.

UWone77
15 May 2016, 18:04
1159

gatordev
30 May 2016, 14:01
Pretty much a mutt, but I guess this area will work...

https://c6.staticflickr.com/8/7341/27288267221_227a84db51_b.jpg

schambers
29 October 2016, 12:29
http://www.weaponevolution.com/forum/attachment.php?attachmentid=1912&d=1477768936

UWone77
30 October 2016, 09:34
http://www.weaponevolution.com/forum/attachment.php?attachmentid=1912&d=1477768936

Very nice Mod 2!

gatordev
21 December 2016, 15:15
Sadly, only a LMT lower, but you can blame California. The upper is pure KAC (well, except the MB).

https://c1.staticflickr.com/1/258/31419705920_06b6e2b352_h.jpg

gatordev
27 December 2016, 14:37
Range day...

https://c5.staticflickr.com/1/562/31773987572_8a24296efb_b.jpg

Joelski
27 December 2016, 15:22
Sadly, only a LMT lower, but you can blame California. The upper is pure KAC (well, except the MB).

https://c1.staticflickr.com/1/258/31419705920_06b6e2b352_h.jpg
Don't say it like it's a bad thing. That's quite a shooter as-is! IMO, above a certain level of material, craftsmanship, and all that stuff, the only difference is the logo. Everybody handles a Colt, but quite few get to play with a KAC, or LMT.

gatordev
14 February 2017, 14:24
Finally a lower for that upper...

https://c1.staticflickr.com/3/2013/32751290412_a66480bcbd_b.jpg

Stickman
18 May 2017, 18:18
3377

schambers
20 February 2018, 12:38
Gonna start messing with this guy

http://www.weaponevolution.com/forum/attachment.php?attachmentid=4975&d=1519158951
http://www.weaponevolution.com/forum/attachment.php?attachmentid=4976&d=1519158957

Joelski
20 February 2018, 13:23
http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/KAC%20SR%2015/20180125_160849_zpssryfjkwu.jpg~original

UWone77
20 February 2018, 14:36
http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/KAC%20SR%2015/20180125_160849_zpssryfjkwu.jpg~original

Man that's coming along quite nicely! Needs MOAR KAC Sights!

Joelski
20 February 2018, 15:18
Man that's coming along quite nicely! Needs MOAR KAC Sights!Agreed. A few more expensive doo-dads and she'll be done!

Stickman
25 February 2018, 20:43
https://farm5.staticflickr.com/4766/24957051037_e6813bb431_b.jpg (https://flic.kr/p/E2npMp)Stickman (https://flic.kr/p/E2npMp) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr

Joelski
31 March 2018, 03:13
Man that's coming along quite nicely! Needs MOAR KAC Sights!Got 'em!

Joelski
31 March 2018, 03:17
Got 'em!And a KAC carrier which is shamefully not etched! It's like having a shiny new pair of Jordans with no swoosh!

UWone77
31 March 2018, 05:42
Got my KAC Lower approved, so my SR-16 based upper gun is done.

Unless I get a FDE T2.

5131

gatordev
31 March 2018, 12:04
Got my KAC Lower approved, so my SR-16 based upper gun is done.


Have you shot that SR-16 upper previously? Seems like reliability has been hit and miss with those uppers. When they work, they work great, but when they don't, lots of mailing back to KAC.

UWone77
31 March 2018, 12:50
Have you shot that SR-16 upper previously? Seems like reliability has been hit and miss with those uppers. When they work, they work great, but when they don't, lots of mailing back to KAC.

I only have 3 mags through it. Was waiting for my Form 1 to be approved.

I'm headed to the range next Monday, I'll let you know more.

Tyrannosaur
1 July 2018, 18:07
Didn't know where to post this question and can't seem to find an answer. I will be getting a KAC SR15 MOD1 with a URX 2 rail. I've always loved the URX 3.1 rail, how hard is it to swap rails? Do they utilize the same barrel nut or do I need their barrel nut wrench?
Finally venturing into the KAC world and this trade just fell into my lap. I'll be honest I don't like their mlok or key mod rail.
Hoping to get a good deal this forth of July for a urx3.1

UWone77
1 July 2018, 18:45
Didn't know where to post this question and can't seem to find an answer. I will be getting a KAC SR15 MOD1 with a URX 2 rail. I've always loved the URX 3.1 rail, how hard is it to swap rails? Do they utilize the same barrel nut or do I need their barrel nut wrench?
Finally venturing into the KAC world and this trade just fell into my lap. I'll be honest I don't like their mlok or key mod rail.
Hoping to get a good deal this forth of July for a urx3.1

If memory serves, the URX 2 and URX 3/3.1 use the same barrel nut. The URX 4 has a different one.

If you're going go from a URX 2 to a URX 3.1 good luck getting that gas block off. I'm guessing it's a Mod 0 if it's got a URX 2. The URX 3.1 was the Mod 1.

Tyrannosaur
1 July 2018, 19:27
Damn I have to take the gas Block off? Not like others where the rail slides over it and you lock it down? I just found two urx3.1 rails for sale is it more of a hassle to switch the rail out?

gatordev
2 July 2018, 04:12
Damn I have to take the gas Block off? Not like others where the rail slides over it and you lock it down? I just found two urx3.1 rails for sale is it more of a hassle to switch the rail out?

The problem is the nut. The URX is a weird animal where it actually screws onto the receiver and then the nut is essentially a jam nut. So once you unscrew the URX nut (with the correct wrench...after breaking the thick soup of Loc-tite), you then have to unscrew the top rail. Then both the nut and the rail slide forward over the gas port.

Tyrannosaur
2 July 2018, 07:08
So it's more trouble than it's worth. I know their wrench is $120 then the URX around 250 used. Maybe I'm better off selling it for what I really want, which is the MOD 1. Thanks guys

UWone77
2 July 2018, 08:50
If it was easy, (as I already have the wrench) I would have replaced both my URX2's with 3.1's.

gatordev
2 July 2018, 14:16
Funny, as I prefer the URX 2. The 3.1 is fantastically light, but I don't like that I have to buy extra stuff to make it work the way I want, like a KAC handstop. Plus you're fairly locked in to light placement. What I do like about the 3 vs the 2 is being able to put a front sight where I want and not losing several rail spaces due to the flip up sight.

Either way, you got a nice rifle!

Joelski
2 July 2018, 15:12
FYI: Charlie's Custom Clones has the URX wrench for $67.

Joelski
2 July 2018, 15:17
And since there's some URX 3.1 love flowing:

http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/KAC%20SR%2015/20180420_183013_zpshleytbku.jpg~original

Tyrannosaur
2 July 2018, 16:47
Funny, as I prefer the URX 2. The 3.1 is fantastically light, but I don't like that I have to buy extra stuff to make it work the way I want, like a KAC handstop. Plus you're fairly locked in to light placement. What I do like about the 3 vs the 2 is being able to put a front sight where I want and not losing several rail spaces due to the flip up sight.

Either way, you got a nice rifle!

Hey let me know if you wanna swap. I've been seeing you guys love KAC never jumped on one then an awesome trade came my way and I took it. I spoke with Operation Parts and they said they could do the swap but I'd prefer the Mod 1. I'll keep ya posted, it'll never be a fil KAC due to N.Y. BS but for what it is it'll be nice

Stone
5 July 2018, 20:43
Finally got rolling on the first of three lowers. Cerakoted in Graphite black with a matte clear coat. Ordered all my parts this week as well.
5544

Joelski
6 July 2018, 05:29
FYI: Charlie's Custom Clones has the URX wrench for $67.And I just scored one for $40. Their sale runs until the 7th.

UWone77
7 July 2018, 19:20
And I just scored one for $40. Their sale runs until the 7th.

Link ?

Stone
7 July 2018, 19:53
https://charliescustomclones.com/collections/shop-tools/products/knights-armament-kac-urx-barrel-nut-wrench-nos

Joelski
7 July 2018, 20:49
Thanks. I thought I put it in my original post, but didn't.

Stone
9 July 2018, 21:44
Just need a trigger. I have Geissele's in all my other rifles so I may try the MBT. Hard to tell from the crappy cell phone pics but the furniture is stealth gray.:P

5557
5558
5559

Joelski
10 July 2018, 03:57
Lookin' good!

Stone
10 July 2018, 05:45
Thanks! Looking forward to testing out that UBR Gen2. Feels good on the shoulder...

gatordev
24 July 2018, 10:50
https://farm1.staticflickr.com/913/43568108942_532d8f3509_b.jpg

PJD642
24 July 2018, 11:20
Just need a trigger. I have Geissele's in all my other rifles so I may try the MBT.

Looks sweet! If you decide you want to stick with Geissele, I've got an installed but never used (other than finger-banging) G2S I'll let go for cheap.

Joelski
24 July 2018, 11:58
And I just scored one for $40. Their sale runs until the 7th.

Update: No, I didn't. The item went out of stock, backordered a couple days after purchasing. After waiting nearly two full weeks with my order in the vaunted "Pre-shipping" phase, the order was cancelled. I also ordered a generic pistol sight tool that I cancelled myself. Not worth risking it not working on a anything I own; I was curiously willing to take the chance when the other parts was available, but it was never something I'd pay over ten bucks shipping for separately. I was contacted by two different people about the order as I'd vented some frustration. I removed the comments, however I don't believe that price will ever come around for real unless Santa Claus himself delivers it to my door. I picked up on that site from a mention from Geissele on his live IG feed.

SINNER
24 July 2018, 14:18
And the fact it still shows up as in stock says all you need to know about that site.

Joelski
24 July 2018, 14:43
It's allegedly back in stock, but I'm that guy who would place an order again and it'd be sold out. I'm gonna stick with OP for all my Knights needs. Those people do everything they can to deliver awesome service, and I say that not having gained one single comp.

Stone
24 July 2018, 14:49
Looks sweet! If you decide you want to stick with Geissele, I've got an installed but never used (other than finger-banging) G2S I'll let go for cheap.

Thanks for the offer! I will keep it in mind...

Former11B
24 July 2018, 15:43
Looks sweet! If you decide you want to stick with Geissele, I've got an installed but never used (other than finger-banging) G2S I'll let go for cheap.

How cheap lol

Joelski
24 July 2018, 15:54
Another one of the bastard child. I'm sure a factory-built one is better, I'm just not sure how.

http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/KAC%20SR%2015/20180420_183013_zpshleytbku.jpg~original

PJD642
24 July 2018, 21:55
How cheap lol

If Stone doesn't want it, I was going to list it for $85 shipped.

UWone77
24 July 2018, 22:15
Is that a factory upper though?

UWone77
24 July 2018, 22:16
https://farm1.staticflickr.com/913/43568108942_532d8f3509_b.jpg

New stock Rail?

gatordev
25 July 2018, 04:31
New stock Rail?

Yup. It will probably be painted after an op-check of my gunsmithing today (and once it stops raining for more than 30 minutes here). I just got so frustrated with POI shift with the RAS when I applied any kind of torque to the rail but I also always liked the retro look. Seemed this scratched both itches.

Slippers
25 July 2018, 04:45
That looks great, gator. RSR just got a few of those rails in. Hmmmm!

Former11B
25 July 2018, 05:37
That looks great, gator. RSR just got a few of those rails in. Hmmmm!

Thoroughbred Armament always has them it seems like. Even had a few MRE rails lately

gatordev
25 July 2018, 13:12
That looks great, gator. RSR just got a few of those rails in. Hmmmm!

Thanks. I ran it today, first zeroing it and then some simple drills dodging rain drops. Worked great and while it was only zeroing at 50y, the groups I was pulling out of this off-the-shelf-then-cut Colt rifle were significantly more consistent than what I've seen from this gun before w/ standard ball ammo. Looks like it was a good upgrade.


Thoroughbred Armament always has them it seems like. Even had a few MRE rails lately

I looked but didn't see it. This is the carbine FF RAS, not the "MK 12" FF RAS. But still, I need to keep that dealer in my scan.

UWone77
25 July 2018, 14:26
If I didn't already have a FSB Cutout RIS II for my other Colt 10.3, I'd get one of these. Definitely Sexy AF!

Former11B
25 July 2018, 16:33
Thanks. I ran it today, first zeroing it and then some simple drills dodging rain drops. Worked great and while it was only zeroing at 50y, the groups I was pulling out of this off-the-shelf-then-cut Colt rifle were significantly more consistent than what I've seen from this gun before w/ standard ball ammo. Looks like it was a good upgrade.



I looked but didn't see it. This is the carbine FF RAS, not the "MK 12" FF RAS. But still, I need to keep that dealer in my scan.

They get stuff in and out daily. Lots of quality parts for clone builds and otherwise

gatordev
25 July 2018, 17:32
If I didn't already have a FSB Cutout RIS II for my other Colt 10.3, I'd get one of these. Definitely Sexy AF!

Show off.

Stone
25 July 2018, 18:07
If Stone doesn't want it, I was going to list it for $85 shipped.

I just took the rifle out last weekend to function test it. I don't even have the BUIS dialed in yet. Its gonna be a while before I can even do that since I am working two full time jobs. If F11B wants it hopefully you guys can work out a deal. Thanks again for the offer though!

tact
10 August 2018, 18:33
https://uploads.tapatalk-cdn.com/20180811/1f26609201d1661772065d4c1e331258.jpg

https://uploads.tapatalk-cdn.com/20180811/4ac13d09b3a6c2bf513fad8d8088698c.jpg

gatordev
16 November 2018, 13:08
https://farm5.staticflickr.com/4865/44096280150_c51e364194_b.jpg

gatordev
13 February 2019, 17:43
https://farm8.staticflickr.com/7814/47074145281_6d90801ef4_b.jpg

Former11B
3 June 2019, 22:01
6594

Finally got a matching front folder.

Done with KAC parts on this build. Only other thing I could do (besides swapping the Mk14 for an FF RAS which isn’t ideal because they’re either 7 1/4” (too short) or 10 3/8” (too long)) is the Ambi mag release and that would interfere with the Maritime bolt catch I believe