PDA

View Full Version : No Tax Stamp Stabilizing Brace SB15



SB15
26 December 2012, 10:52
Hi everyone,
I’m new here to the forum, but I've posted this on some other forums as well. I have been developing with the Chief Prosthetis at the local Veterans Hospital a Stabilizing Brace (SB15) for the ar15 pistol, and a few other pistols that are similar in format, that I think all of us here will appreciate. The Product is "Patent Pending and the ATF has given me the Approval letter which is posted below. I am a veteran and after 12 years of service and various deployments I have some mobility issues with my shooting hand and arm and the intent of the SB15 is to assist those with limited strength or mobility while shooting from the one-handed pistol precision stance or one handed supported stance. I think my product also finally gives some extra aesthetic value to the pistol version of the AR15. Attached are some pictures of the most recent prototype. There will be three versions of this first model in Black, Sand and Olive drab and wont have any of the defects you see on the original. The first run should be available by Feb 1st and the ATF approval letter will be in every box.

I'm also workign on setting up a Day at the Range, with some disabled vets, once I have some dates I will post them for those in the Florida region.

It would be nice to get some feedback from you guys!

Thanks

Alex

http://i1303.photobucket.com/albums/ag159/alessandrorbosco/IMG_4732_zpsf608ce5e.jpg

http://i1303.photobucket.com/albums/ag159/alessandrorbosco/IMG_4734_zpsf1c9af0a.jpg

http://i1303.photobucket.com/albums/ag159/alessandrorbosco/IMG_4733_zps9805a2f4.jpg

http://i1303.photobucket.com/albums/ag159/alessandrorbosco/ATFApprovalLetter1-1.jpg

http://i1303.photobucket.com/albums/ag159/alessandrorbosco/ATFApprovalLetter2.jpg

http://i1303.photobucket.com/albums/ag159/alessandrorbosco/ATFApprovalPhotos.jpg


And this is the original version I sent to the ATF for approval. I sent them a simple version with no color and straps that went around the top and another that went through the middle as seen in the photos they took above.

http://i1303.photobucket.com/albums/ag159/alessandrorbosco/IMG_4639.jpg

TripleBravo
27 December 2012, 03:40
Very cool, SB15....keep us informed as you start producing more of them.

SB15
27 December 2012, 05:29
I will...should you have any questions please feel free to contact me...and seeing that I'm doing this on my own, any comments, good or bad are accepted with open arms!!!