PDA

View Full Version : Just AR's Gallery



Pages : 1 2 3 4 5 [6] 7 8 9 10 11 12 13 14 15 16 17

GOST
24 April 2015, 21:43
That just T&E, if the 2 year old damages the NSR 11 using it as a drum stick then it doesn't belong on your rifle.

UWone77
24 April 2015, 21:44
Be thankful it's just your wife's loving complaints. A few days ago my wife and I were watching tv and out the corner of my eye I see our 2 year old walking around playing with the 11" NSR I just got in. Luckily I got to her about the same moment she decided it would have made a good drum stick. Apparently she thought to "make pretty music with it" :)


Sent from my iPad using Tapatalk

All I hear is... why do you need more than than 1 of each? Why don't you just keep like 3 and get rid of the rest? LOL... she must be reading rob_s threads... of the trifecta.

GOST
24 April 2015, 21:48
Mine just says is that an extension of your }!{? And I tell her I wish it was.

Slippers
24 April 2015, 22:03
All I hear is... why do you need more than than 1 of each? Why don't you just keep like 3 and get rid of the rest? LOL... she must be reading rob_s threads... of the trifecta.

Don't you have a rather high number of uppers? :)

mustangfreek
25 April 2015, 01:32
You're comparing your buffoonery to having a muzzle device partially hand threaded to an incomplete upper?

If you were reaching any further, I'd have to call you WEVO Ginger Jr. [BD]


Lol...Whatcha talking about, u know nothing...[BD]

And really...Gingertastic..what the hell....lol...wevo ginger was better...

Deadwing
25 April 2015, 03:24
Until we move in a few months, my work bench is nothing to write home about, but here's a quick shot of some of the junk my wife complains about in my "studio"


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3321_zpsbfsid16o.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3321_zpsbfsid16o.jpg.html)

That's neat and tidy compared to the massive CF in my "office".

Ordnance
25 April 2015, 11:12
http://i.imgur.com/nGipZ6k.jpg

http://i.imgur.com/iGGiMat.jpg

UWone77
25 April 2015, 11:16
That's neat and tidy compared to the massive CF in my "office".

LOL... that's the only neat part of this room.

Dsully
26 April 2015, 05:19
https://farm8.staticflickr.com/7665/16654845343_1b8d1fd0ae_b.jpg (https://flic.kr/p/rnJrgV)3ARspread-3.jpg (https://flic.kr/p/rnJrgV) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr

GOST
26 April 2015, 06:36
Cool pic brother!

Dsully
26 April 2015, 06:40
Thanks man

Deadwing
27 April 2015, 02:11
LOL... that's the only neat part of this room.

I'd post a photo of the neat part of my office, by my skills at macro photography are rather lacking. [BD]

UWone77
30 April 2015, 11:25
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3355_zpse9qrljwq.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3355_zpse9qrljwq.jpg.html)

GOST
30 April 2015, 11:49
That looks good.

Ordnance
30 April 2015, 16:12
http://i.imgur.com/MXCqWLH.jpg

Farva
30 April 2015, 20:20
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3355_zpse9qrljwq.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3355_zpse9qrljwq.jpg.html)

Damn that's sexy!

Dsully
1 May 2015, 02:47
https://farm9.staticflickr.com/8762/17135710408_d8d457b2a6_b.jpg (https://flic.kr/p/s7dZGU)SD8A9425-Edit.jpg (https://flic.kr/p/s7dZGU) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr

CarbonScoring
1 May 2015, 18:02
https://farm8.staticflickr.com/7717/16697975473_c3c656f724_b.jpg

https://farm8.staticflickr.com/7656/17130882818_120875d6c5_b.jpg

https://farm9.staticflickr.com/8818/17318674735_79dfd6d832_b.jpg

DutyUse
1 May 2015, 21:43
https://farm8.staticflickr.com/7717/16697975473_c3c656f724_b.jpg

https://farm8.staticflickr.com/7656/17130882818_120875d6c5_b.jpg

https://farm9.staticflickr.com/8818/17318674735_79dfd6d832_b.jpg

Wow! [ADORE]

Full specs please? Never guessed it but that color pulls it all together


Sent from my iPad using Tapatalk

CarbonScoring
2 May 2015, 08:48
Wow! [ADORE]

Full specs please? Never guessed it but that color pulls it all together


Thanks.

Not 100% sure on specs (since it's not mine), but it's an Atomic Tactical billet "Push Me" lower, Mega billet upper, Troy PDW stock and BCG, 12.5" barrel (I believe), 12" SLR Solo Lite M-lok handguard, Battlecomp, Raptor, K2+ grip, V7 57 degree ambi safety and a Geissele G2S trigger. The EoTech is mine, I threw it on for the photos.

Oh, and the Cerakote is Atomic's Adaptive Bronze (new color). I like this color so much they're going to do my Salient receivers in it instead of a metallic OD green.

UWone77
2 May 2015, 22:34
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3406_zpsqyrjukwp.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3406_zpsqyrjukwp.jpg.html)

Ordnance
3 May 2015, 13:54
http://i.imgur.com/j5MPjJS.jpg

http://i.imgur.com/Ge0HdL7.jpg

http://i.imgur.com/S6o8bjd.jpg

six8
3 May 2015, 15:05
Awesome pics, Ordnance!

Dsully
5 May 2015, 10:09
https://farm9.staticflickr.com/8828/17173266577_faec062420_b.jpg (https://flic.kr/p/saxtR4)SD8A1527-Edit.jpg (https://flic.kr/p/saxtR4) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr
https://farm9.staticflickr.com/8724/16760369753_f0fb8610f5_b.jpg (https://flic.kr/p/rx4h1i)SD8A1516-Edit.jpg (https://flic.kr/p/rx4h1i) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr

UWone77
5 May 2015, 11:44
Found this old pic on one of my iPhones. Used to keep my "regular" shooting guns near my mud room at my old house, in a small locked room.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_0257_zpszyjdynnx.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_0257_zpszyjdynnx.jpg.html)

Dsully
5 May 2015, 11:50
I like that :)

Uffdaphil
5 May 2015, 12:41
Thanks UW! I was beginning to think I might have a hoarding problem. But now feel like I need a couple more to catch up. I'll check in the mirror for a second opinion just to be sure....Yep, GTG.

toolboxluis00200
5 May 2015, 12:59
Found this old pic on one of my iPhones. Used to keep my "regular" shooting guns near my mud room at my old house, in a small locked room.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_0257_zpszyjdynnx.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_0257_zpszyjdynnx.jpg.html)

OK that cool looking

UWone77
5 May 2015, 13:04
Thanks UW! I was beginning to think I might have a hoarding problem. But now feel like I need a couple more to catch up. I'll check in the mirror for a second opinion just to be sure....Yep, GTG.

Well you'd have to catch up to a 2010 pic...[BD]

Tyrannosaur
5 May 2015, 19:20
https://farm9.staticflickr.com/8828/17173266577_faec062420_b.jpg (https://flic.kr/p/saxtR4)SD8A1527-Edit.jpg (https://flic.kr/p/saxtR4) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr
https://farm9.staticflickr.com/8724/16760369753_f0fb8610f5_b.jpg (https://flic.kr/p/rx4h1i)SD8A1516-Edit.jpg (https://flic.kr/p/rx4h1i) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr

So much awesome. Makes me really hate NY

CarbonScoring
5 May 2015, 21:28
Full auto, 4" barrel, suppressed, 22lr (PMAG is just to stand it up)

https://farm8.staticflickr.com/7734/16763938354_6b6c0a46a4_b.jpg

Computalotapus
6 May 2015, 06:08
Full auto, 4" barrel, suppressed, 22lr (PMAG is just to stand it up)

https://farm8.staticflickr.com/7734/16763938354_6b6c0a46a4_b.jpg

How much fun is that thing?

Dsully
6 May 2015, 07:14
So much awesome. Makes me really hate NY

Thanks

CarbonScoring
6 May 2015, 21:18
How much fun is that thing?

Let me put it this way. When every person I've ever seen shoot it finished their first mag, they giggled.

Txfilmmaker
6 May 2015, 21:29
Let me put it this way. When every person I've ever seen shoot it finished their first mag, they giggled.

I'm sure! :-)


Sent from my iPhone using Tapatalk

Ordnance
7 May 2015, 15:41
http://i.imgur.com/xOd8aqJ.jpg

toolboxluis00200
7 May 2015, 16:04
Full auto, 4" barrel, suppressed, 22lr (PMAG is just to stand it up)

https://farm8.staticflickr.com/7734/16763938354_6b6c0a46a4_b.jpg

That is sick looking

INTrooper4255
8 May 2015, 08:54
http://i167.photobucket.com/albums/u122/INTrooper4255/009_zpsuavzpdnl.jpg (http://s167.photobucket.com/user/INTrooper4255/media/009_zpsuavzpdnl.jpg.html)

http://i167.photobucket.com/albums/u122/INTrooper4255/010_zpsplc265ri.jpg (http://s167.photobucket.com/user/INTrooper4255/media/010_zpsplc265ri.jpg.html)

Pyzik
8 May 2015, 10:12
http://i167.photobucket.com/albums/u122/INTrooper4255/009_zpsuavzpdnl.jpg (http://s167.photobucket.com/user/INTrooper4255/media/009_zpsuavzpdnl.jpg.html)

http://i167.photobucket.com/albums/u122/INTrooper4255/010_zpsplc265ri.jpg (http://s167.photobucket.com/user/INTrooper4255/media/010_zpsplc265ri.jpg.html)

Another nice looking rifle, sir.

voodoo_man
10 May 2015, 02:54
http://i.imgur.com/9lX9RVI.jpg

ksenter
10 May 2015, 15:56
http://i167.photobucket.com/albums/u122/INTrooper4255/009_zpsuavzpdnl.jpg (http://s167.photobucket.com/user/INTrooper4255/media/009_zpsuavzpdnl.jpg.html)

http://i167.photobucket.com/albums/u122/INTrooper4255/010_zpsplc265ri.jpg (http://s167.photobucket.com/user/INTrooper4255/media/010_zpsplc265ri.jpg.html)

I must ask...how did you keep or reattain the laser marks after coating? or was it supplied in said color from mfg? I'd love to have one or two of mine cerakoted, but am kinda partial to the laser etchings. Call it as you wish, but I like it this way, haha.

Ordnance
10 May 2015, 16:17
http://i.imgur.com/N1JJdNQ.jpg

http://i.imgur.com/ic2bvgV.jpg

UWone77
10 May 2015, 16:20
I must ask...how did you keep or reattain the laser marks after coating? or was it supplied in said color from mfg? I'd love to have one or two of mine cerakoted, but am kinda partial to the laser etchings. Call it as you wish, but I like it this way, haha.

Good catch.... I have a 10.5 LMT MRP, that is really beat up and could use a cerakote job. I'm not concerned about the markings as much, but interest to see if they were re-etched on the receiver.

SINNER
10 May 2015, 16:46
Is it just me or do the valleys in the rails look black? Maybe he taped of the valleys before he spray bombed it.

INTrooper4255
10 May 2015, 17:23
I must ask...how did you keep or reattain the laser marks after coating? or was it supplied in said color from mfg? I'd love to have one or two of mine cerakoted, but am kinda partial to the laser etchings. Call it as you wish, but I like it this way, haha.

I agree with you. I very carefully masked each and every marking with masking tape before I sprayed it. :)

UWone77
10 May 2015, 18:26
Is that a rattle can job then? If so, pretty nice looking!

INTrooper4255
10 May 2015, 18:34
Yes, Rustoleum earth brown.

2ATA
11 May 2015, 06:39
http://i.imgur.com/VFrprlz.jpg

11 inch SBR after carbine course with Ranfer Firearms Instruction on Saturday 09May2015. Brought the SCAR as my backup rifle.

Pic from Galaxy S4 potato.

GOST
11 May 2015, 06:44
Nice backup brother.

SINNER
11 May 2015, 07:02
Isn't that like racing a VW and leaving the 911 RSR on the trailer as a back up? LOL

2ATA
11 May 2015, 07:07
Isn't that like racing a VW and leaving the 911 RSR on the trailer as a back up? LOL

I've run nothing except the SCAR since I got it. It was one of the first imports. Now that we finally have SBR's legal I'm running the SBR AR for now.............

GOST
11 May 2015, 07:10
You gonna SBR the SCAR? Nefarious Arms does some pretty cool work.

2ATA
11 May 2015, 07:11
Nice backup brother.

Thanks brother. She has been primary for a long time. She needed a break.

2ATA
11 May 2015, 07:12
You gonna SBR the SCAR? Nefarious Arms does some pretty cool work.

She is going to be SBR'd. I like to spend money so she is getting a FN factory short barrel.

SINNER
11 May 2015, 07:29
I've run nothing except the SCAR since I got it. It was one of the first imports. Now that we finally have SBR's legal I'm running the SBR AR for now.............

I just got my tax stamp for my 16s. I wish someone besides HDD did barrels for these. I really want to try their .300 BO barrel but it seems to be about 25% of the customers are not happy with their service. I already have the factory 10" 5.56 barrel just need to get it engraved to assemble it. Nice looking rifles you have there.

voodoo_man
11 May 2015, 20:05
http://i.imgur.com/Db7xes8.jpg

DutyUse
13 May 2015, 00:47
http://images.tapatalk-cdn.com/15/05/12/492332931f253be9be306b1245b8422f.jpg

Had an old friend follow me home from work today. Nice to have her back..My 2nd ground up build

UWone77
13 May 2015, 23:37
http://images.tapatalk-cdn.com/15/05/12/492332931f253be9be306b1245b8422f.jpg

Had an old friend follow me home from work today. Nice to have her back..My 2nd ground up build

I like the background boxes... [:)]

DutyUse
14 May 2015, 10:22
I like the background boxes... [:)]

Thanks, The former owner of that Ballistic Advantage equipped upper never mentioned having any feeding issues, nor did I personally have any problems when I shot it originally. When I ripped it apart last night for cleaning and inspection however the barrel feed ramps were basically golden from rounds feeding poorly. Looks like the headspacing is off quite badly. It's been paired with a BCM bcg since inception. I also noticed the SYRAC adj GB was turned up more then I remember...

The background boxes were meant for future photos :P

Ordnance
14 May 2015, 12:35
http://i.imgur.com/L1IBsfIh.jpg

GOST
14 May 2015, 13:04
http://i.imgur.com/L1IBsfIh.jpg

Is this a pro-poaching photo?

Ordnance
14 May 2015, 13:15
Is this a pro-poaching photo?

Lol... no, it's meant to be an irony photo.

Computalotapus
14 May 2015, 13:32
Lol... no, it's meant to be an irony photo.

You know you are trying to hunt the last Rhino..... for shame

Ordnance
14 May 2015, 15:52
You know you are trying to hunt the last Rhino..... for shame

I thought it was an old, grayish, obese unicorn...

Ordnance
14 May 2015, 18:15
You know you are trying to hunt the last Rhino..... for shame

I just saw the comment over on the Mega Arms IG repost. I didn't realize until I got a couple hate mails from some hippie retards on FB about it. How in the f#$k people are inferring that I support poaching, and poaching endangered animals, is beyond me. I get to look forward now to getting on some A.L.F. hit list.

Pyzik
14 May 2015, 18:24
I thought it was an old, grayish, obese unicorn...
Hahaha

GOST
14 May 2015, 19:37
I just saw the comment over on the Mega Arms IG repost. I didn't realize until I got a couple hate mails from some hippie retards on FB about it. How in the f#$k people are inferring that I support poaching, and poaching endangered animals, is beyond me. I get to look forward now to getting on some A.L.F. hit list.

The reason I asked if this was a pro-poaching pic is because I have these same signs posted on my property. Every now and then I get woke up by hunters trespassing in the middle of the night, spot lighting and shooting whatever. I've had cattle and pets shot by these folks. These people are hard to catch but usually the next morning you find your postings ripped down and on the ground like in your photo. I now know that wasn't your intent, but your emails may be coming from farmers instead of hippies.

Computalotapus
14 May 2015, 19:48
I just saw the comment over on the Mega Arms IG repost. I didn't realize until I got a couple hate mails from some hippie retards on FB about it. How in the f#$k people are inferring that I support poaching, and poaching endangered animals, is beyond me. I get to look forward now to getting on some A.L.F. hit list.


Haha I was just giving you a hard time brother

Ordnance
14 May 2015, 21:51
The reason I asked if this was a pro-poaching pic is because I have these same signs posted on my property. Every now and then I get woke up by hunters trespassing in the middle of the night, spot lighting and shooting whatever. I've had cattle and pets shot by these folks. These people are hard to catch but usually the next morning you find your postings ripped down and on the ground like in your photo. I now know that wasn't your intent, but your emails may be coming from farmers instead of hippies.

It's some people from anti-hunting groups, not farmers. I also made it clear, along with Mega who reposted it, that it was about "irony". The only place I didn't post the title was here. I had issues when I did my prohibition photos as some people wanted to infer I was trying to send a message that guns and drinking being cool. I'll just have to deal with it, since I like doing theme style photos and art is subjective.

Ordnance
14 May 2015, 21:52
http://i.imgur.com/AbxTaVYh.jpg

six8
16 May 2015, 16:19
Just need a RDS and the truck gun will be done.

http://i.imgur.com/jjlMB1Q.jpg?2

six8
16 May 2015, 16:19
http://i.imgur.com/AbxTaVYh.jpg

Nice shot, Sir

GOST
16 May 2015, 16:24
Good looking truck gun six8.

six8
16 May 2015, 16:44
Good looking truck gun six8.

Thank You

Ordnance
16 May 2015, 17:46
Nice shot, Sir

Thank you...

toolboxluis00200
16 May 2015, 18:15
Just need a RDS and the truck gun will be done.

http://i.imgur.com/jjlMB1Q.jpg?2

Nice set up I like it

six8
16 May 2015, 18:45
Nice set up I like it
Thanks, Luis

Former11B
16 May 2015, 20:18
Ordnance; nice setup and pic. Specs on the rig?


Just ordered a Rainier 18" Match SPR barrel for the build I started when I won the PXT FFSSR rail during the Veterans Day GAW last year so the upper will be done, and will have the lower mostly together around Father's Day

toolboxluis00200
17 May 2015, 00:54
Thanks, Luis

U welcome

Ordnance
17 May 2015, 13:19
Ordnance; nice setup and pic. Specs on the rig?

Just ordered a Rainier 18" Match SPR barrel for the build I started when I won the PXT FFSSR rail during the Veterans Day GAW last year so the upper will be done, and will have the lower mostly together around Father's Day


JP Enterprises LRP07 in .260 (I would choose a 6.5CM though over a .260), JP LMOS BCG with silent capture spring, XLR Industries buttstock, Harris 6-9 S-BRM with some custom feet from NW Precision Rifles, USO SN-3 TPAL 3-17x50 EREK, M40, and a GAP reticle with internal bubble level. I believe it was a 22" barrel, but I don't remember exactly. It belongs to my friend Scott who let me use it in a match not too long ago. I was banging steel out to a little over 1100yds.

You should do well with the RA barrel. I've used my 18" RA Ultramatch out to 905yds with factory match ammo, and I was very impressed.

gatordev
17 May 2015, 14:52
...Harris 6-9 S-BRM with some custom feet from NW Precision Rifles...

Have you used the HSSS Fang feet? I'm curious if the NW Precision Rifles does something different for an additional $30. I've been very happy with my HSSS feet but I need another set of feet, so was curious about your thoughts.

Aragorn
18 May 2015, 16:31
Got a pic request that may be hard to fill...

Anyone have a Mega billet upper on an Umbrella billet lower?

Dstrbdmedic167
18 May 2015, 16:32
Got a pic request that may be hard to fill...

Anyone have a Mega billet upper on an Umbrella billet lower?

I'm sure UW can fill that request....

Aragorn
18 May 2015, 16:37
I'm sure UW can fill that request....

I'm hoping!

Ordnance
18 May 2015, 23:26
Have you used the HSSS Fang feet? I'm curious if the NW Precision Rifles does something different for an additional $30. I've been very happy with my HSSS feet but I need another set of feet, so was curious about your thoughts.

I have. Check your PMs

voodoo_man
19 May 2015, 11:27
http://i.imgur.com/5D4d7cX.jpg

Dsully
19 May 2015, 11:44
USO?

SINNER
19 May 2015, 11:47
Looks like it. On a Bobro mount.

voodoo_man
19 May 2015, 16:10
USO?

yep, SR4c

velocity2006
19 May 2015, 18:52
Still waiting on some small parts for the lower, but was able to get a mock up thrown together today.

http://i621.photobucket.com/albums/tt300/VI2006/Aero%20M4E1/2_zpsjv5hi96v.jpg

Dstrbdmedic167
19 May 2015, 19:50
Still waiting on some small parts for the lower, but was able to get a mock up thrown together today.

http://i621.photobucket.com/albums/tt300/VI2006/Aero%20M4E1/2_zpsjv5hi96v.jpg

Looks good. I have the M4E1 with the 12" keymod. I'd swear that upper was billet if I don't know any better!

Also what safety is that iron viper?(name may be off a little)

velocity2006
19 May 2015, 19:54
It is a Strike Industries Ambi, just had the best aesthetics to go with the Mega ambi controls and the FCD parts. Also looked at the Damage Industries ambi safety as well, but the SI was a better fit.

Dstrbdmedic167
19 May 2015, 20:41
It is a Strike Industries Ambi, just had the best aesthetics to go with the Mega ambi controls and the FCD parts. Also looked at the Damage Industries ambi safety as well, but the SI was a better fit.

Thanks!! I have the Damage ones,they work but I'll stick with BAD from here after....

GOST
19 May 2015, 20:52
Thanks!! I have the Damage ones,they work but I'll stick with BAD from here after....

BAD fan here also. If you ever deal with their customer service you'll be hooked also.

Dstrbdmedic167
19 May 2015, 20:54
BAD fan here also. If you ever deal with their customer service you'll be hooked also.

Indeed and I've talked to George on the phone and that has me hooked as well... Top notch guy as most are in the industry.

velocity2006
19 May 2015, 21:03
The build has BAD pins, and I have a BAD safety on another rifle they are nice. I have just had a few of these SI safeties and they function as well as the BAD, just look different.

toolboxluis00200
21 May 2015, 13:06
https://c1.staticflickr.com/9/8855/17915207726_9c3930c384_c.jpg (https://flic.kr/p/ti786Q)16 upper (1 of 7) (https://flic.kr/p/ti786Q) by Luis f (https://www.flickr.com/photos/toolboxluis/), on Flickrhttps://c1.staticflickr.com/9/8784/17319008754_62ea3170e5_c.jpg (https://flic.kr/p/soqrVd)16 upper (4 of 7) (https://flic.kr/p/soqrVd) by Luis f (https://www.flickr.com/photos/toolboxluis/), on Flickrhttps://c4.staticflickr.com/8/7738/17753704428_16c1b96ef9_c.jpg (https://flic.kr/p/t3QnNd)16 upper (7 of 7) (https://flic.kr/p/t3QnNd) by Luis f (https://www.flickr.com/photos/toolboxluis/), on Flickr

Former11B
21 May 2015, 13:41
Does your serial number start with, THUG, Luis? Hahah

Having the red dot that far forward doesn't make your FOV too small given the size of the lenses?

toolboxluis00200
21 May 2015, 13:54
Does your serial number start with, THUG, Luis? Hahah

Having the red dot that far forward doesn't make your FOV too small given the size of the lenses?

lol yes it dose its a hard to find spike tactical lower they wher mostly use for T&E uppers
and the red dot i like it that way i cab see the dot much better

velocity2006
24 May 2015, 19:12
http://i621.photobucket.com/albums/tt300/VI2006/Aero%20M4E1/Right%20Side_zpsqadcevza.jpg

UWone77
25 May 2015, 19:13
https://c1.staticflickr.com/9/8855/17915207726_9c3930c384_c.jpg (https://flic.kr/p/ti786Q)16 upper (1 of 7) (https://flic.kr/p/ti786Q) by Luis f (https://www.flickr.com/photos/toolboxluis/), on Flickrhttps://c1.staticflickr.com/9/8784/17319008754_62ea3170e5_c.jpg (https://flic.kr/p/soqrVd)16 upper (4 of 7) (https://flic.kr/p/soqrVd) by Luis f (https://www.flickr.com/photos/toolboxluis/), on Flickrhttps://c4.staticflickr.com/8/7738/17753704428_16c1b96ef9_c.jpg (https://flic.kr/p/t3QnNd)16 upper (7 of 7) (https://flic.kr/p/t3QnNd) by Luis f (https://www.flickr.com/photos/toolboxluis/), on Flickr

Congrats on your new upper Luis. What are the specs and price?

alamo5000
25 May 2015, 19:39
http://i.imgur.com/5D4d7cX.jpg


Awesome pic voodoo_man

Pyzik
25 May 2015, 19:41
Nice looking upper Luis. I noticed THUG too. That is awesome.

alamo5000
25 May 2015, 20:23
Can I make a pic request?

I want to see what an 11" rail looks like on a 11.5" barrel and/or a 12" rail on a 12.5" barrel.

If you can do one with a suppressor mounted that would be even better.

alamo5000
25 May 2015, 20:31
Found this old pic on one of my iPhones. Used to keep my "regular" shooting guns near my mud room at my old house, in a small locked room.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_0257_zpszyjdynnx.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_0257_zpszyjdynnx.jpg.html)

You seriously have an addiction dude. :)

Former11B
25 May 2015, 22:38
Can I make a pic request?

I want to see what an 11" rail looks like on a 11.5" barrel and/or a 12" rail on a 12.5" barrel.

If you can do one with a suppressor mounted that would be even better.

I'll be able to show you what a 17.5" rail and a 18" barrel w/ suppressor looks like this coming Friday or Saturday

alamo5000
25 May 2015, 22:56
I'll be able to show you what a 17.5" rail and a 18" barrel w/ suppressor looks like this coming Friday or Saturday

Are you clairvoyant?[:D] HAHAAAA!!!

Sure. That would be interesting. I just dropped some bucks on the suppressor now I am pre-planning possibly spending future paychecks LOL!! I might build an upper...either 11.5 or 12.5...and go ahead and do the SBR thing.

I am just curious as to the clearances and how much (if any) those rails go over the threads of the barrel, and if there is clearance, how much. If the hand guard leaves even 1/4 of an inch (or maybe even less) between it and the shoulder of the barrel I think I will be good.

UWone77
25 May 2015, 22:57
You seriously have an addiction dude. :)

Yeah in 2010 or 2011 when I took this pic. [BD]

alamo5000
25 May 2015, 23:23
Yeah in 2010 or 2011 when I took this pic. [BD]

Like it's gotten better since then... uh huh...

That being said if I could do it I would... I really should start my own hedge fund or something...

Or at very least start investing...that's complicated though.... ughhh.... the market. Don't even get me started...

Dstrbdmedic167
25 May 2015, 23:25
Can I make a pic request?

I want to see what an 11" rail looks like on a 11.5" barrel and/or a 12" rail on a 12.5" barrel.

If you can do one with a suppressor mounted that would be even better.

Most of the time your gonna have a hard time getting those combos to work. Not saying you can't but you'd have to find a short rail and a long barrel. Me and UW both had trouble trying to use a 12" rail on a 12.5" barrel recently. I have a build pictured here somewhere that I got it to work but after talking with the barrel maker I found out he makes his barrel is just a tad longer than 12.5" for that reason.

I switched up and did an 11" rail on the 12.5" barrel. It works well to me and looks decent overall. Obviously not quite as close as you'd like but it still looks good. Check the NFA pic thread and you'll see plenty of combos.

UWone77
25 May 2015, 23:26
Speaking of... I'm still trying to figure out what to do about that 12.5. I think I'm going to go with an 11" handguard, but haven't decided which one. Seems like there are a lot fewer options in the 11" arena.

alamo5000
25 May 2015, 23:31
Most of the time your gonna have a hard time getting those combos to work. Not saying you can't but you'd have to find a short rail and a long barrel. Me and UW both had trouble trying to use a 12" rail on a 12.5" barrel recently. I have a build pictured here somewhere that I got it to work but after talking with the barrel maker I found out he makes his barrel is just a tad longer than 12.5" for that reason.

I switched up and did an 11" rail on the 12.5" barrel. It works well to me and looks decent overall. Obviously not quite as close as you'd like but it still looks good. Check the NFA pic thread and you'll see plenty of combos.

On those suppressors you guys are using... how much do they seat over the muzzle device? Has anyone measured?

alamo5000
25 May 2015, 23:32
Speaking of... I'm still trying to figure out what to do about that 12.5. I think I'm going to go with an 11" handguard, but haven't decided which one. Seems like there are a lot fewer options in the 11" arena.

I know the perfect thing for that 12.5"... you can donate it to me [:D] Then I will be forced to SBR my lower....HAHAA!

Dstrbdmedic167
25 May 2015, 23:34
Speaking of... I'm still trying to figure out what to do about that 12.5. I think I'm going to go with an 11" handguard, but haven't decided which one. Seems like there are a lot fewer options in the 11" arena.

There are for sure. You become limited to a degree on options. I wish Someone made an 11.7" rail... :wink:

alamo5000
25 May 2015, 23:40
Speaking of... I'm still trying to figure out what to do about that 12.5. I think I'm going to go with an 11" handguard, but haven't decided which one. Seems like there are a lot fewer options in the 11" arena.

Hey, I have an idea... is there any way you could put a word in with the folks at Rainier to make those Select barrels in different lengths? They go from 10.5 and then jump to 14.5...

But if they could make them in 12" and 13" versions it would sure solve a whole lotta problems.... 12" barrel+11 inch rail.... or 13" barrel and 12" rail...

UWone77
25 May 2015, 23:48
Hey, I have an idea... is there any way you could put a word in with the folks at Rainier to make those Select barrels in different lengths? They go from 10.5 and then jump to 14.5...

But if they could make them in 12" and 13" versions it would sure solve a whole lotta problems.... 12" barrel+11 inch rail.... or 13" barrel and 12" rail...

I agree. I'd like to see some 11.5's and 12.5's. It's costly to get other lengths because of the quantity sometimes.

I really wanted some 10.3 Mountain Barrels, so basically I had to get some 14.5's cut down to 10.3.

alamo5000
25 May 2015, 23:58
I agree. I'd like to see some 11.5's and 12.5's. It's costly to get other lengths because of the quantity sometimes.

I really wanted some 10.3 Mountain Barrels, so basically I had to get some 14.5's cut down to 10.3.

I don't know what kind of volumes they need but if they did say a run of 100 or whatever in 12" or whatever length...I think that would be golden. Maybe do a once a year run or something... see how it goes...

I think if they do them in even lengths and call them SBR barrels then it will solve a lot of the rail barrel length problems people have.

Edit: When you cut down a barrel does that adversely effect anything about it? Harmonics? Accuracy? Anything?

Deadwing
26 May 2015, 01:35
There are for sure. You become limited to a degree on options. I wish Someone made an 11.7" rail... :wink:

Daniel Defense needs to bring back the GL/SSC. I think it was 11.75", about as long as possible while still allowing a suppressor to be used on a 12.5" barrel. I'd be all over that for my 12.5" upper. I finally settled for an 11" NSR. It's nice, but not exactly what i wanted.

GOST
26 May 2015, 03:10
According to 2A Armament their 12" Lite Rail is actually 11.88". Here's their pic of it on a 12.5" barrel. Looks like it stops at the shoulder, can't tell from the pic if you'll be able to mount a suppressor.

https://scontent-atl1-1.xx.fbcdn.net/hphotos-xpf1/t31.0-8/10926808_869662456387918_7194829322165319122_o.jpg ?efg=eyJpIjoidCJ9

Former11B
26 May 2015, 04:00
On those suppressors you guys are using... how much do they seat over the muzzle device? Has anyone measured?

The only reason I can make it work with that clearance is because the suppressor is thread on. A QD or brake mounted can (Recce 5) would need an additional inch or more to clear.

I know on ARFCOM/M4C there are A lot of threads dedicated to getting MK18 10.3" barrels to work in conjunction with the rails while suppressed... You'll find exact measurements in those threads down to sheets of paper width between the rail and can

alamo5000
26 May 2015, 07:36
The only reason I can make it work with that clearance is because the suppressor is thread on. A QD or brake mounted can (Recce 5) would need an additional inch or more to clear.

I specifically asked this question to one of the guys at Griffin and he told me the suppressor does not go over (exceed beyond) the muzzle device very much if any in that direction. It was something like .05".

Edit: Per the specs on Griffin's page the taper mount for 5.56 is 2.37" long. The overall length of the suppressor is 6.2" and the "length added" is 3.8.

Doing the math 6.2 minus 2.37=3.83", so if they state an added 3.8" then it goes over the shoulder .03"....

I am thinking that some of the other suppressors might seat deeper than that so some of the previously tried combos still might have a hope.

SINNER
26 May 2015, 07:42
I just wish Rainier would get the Creedmoor barrels back in stock. Missed the boat on the first batch and been waiting ever since.

toolboxluis00200
26 May 2015, 09:11
Congrats on your new upper Luis. What are the specs and price?

Thanks. I have no clue what the specs are. [BD][BD]
All I now is it has a 16 inch barrel (556) and 15inch kmod rail it has the BCG and charging handle all I pay was $350 plus tax

I figure after what happened to me all most died. I figure I tret my self [:D]

Former11B
26 May 2015, 09:18
I specifically asked this question to one of the guys at Griffin and he told me the suppressor does not go over (exceed beyond) the muzzle device very much if any in that direction. It was something like .05".

Edit: Per the specs on Griffin's page the taper mount for 5.56 is 2.37" long. The overall length of the suppressor is 6.2" and the "length added" is 3.8.

Doing the math 6.2 minus 2.37=3.83", so if they state an added 3.8" then it goes over the shoulder .03"....

I am thinking that some of the other suppressors might seat deeper than that so some of the previously tried combos still might have a hope.

Rainier makes a 13.7" Match .223 Wylde barrel that would probably be sweet with a 12-12.5" rail

Uffdaphil
28 May 2015, 13:12
Finished up two PITA builds today. Both shaved FSBs. I bought a 9" C4 for the 14.5" not realizing mid-length meant it fit to the FSB and would not cover the shaved gas block. Fortunately CarbonScoring traded me his 12".

The other was a project to see how cheaply I could put together a quality rifle out of spares lying around. The only part I had to buy was the SMOS Sugar Pine for $100. Oh, and as I was whinging that I forgot to put the dust cover on before the rail, Carbon solved that problem too - Strike Industries snap-in cover. Plus he entered the Gun Trust info on the .gov site for me.A threefer! Beaucoup thanks brother.

Spares used:
6920 barrel and FH, ~200 rds fired
BCM blem upper
Mega Gator lower
Colt FA BCG
1.5x ACOG
LWRC BUIS
MAGPUL FDE
A5 buffer/tube

http://i150.photobucket.com/albums/s92/uffdaphil/image.jpg1_28.jpg (http://s150.photobucket.com/user/uffdaphil/media/image.jpg1_28.jpg.html)

Safe is so stuffed now I will have to give one or two to my brothers-in-law.

Computalotapus
28 May 2015, 13:18
Finished up two PITA builds today. Both shaved FSBs. I bought a 9" C4 for the 14.5" not realizing mid-length meant it fit to the FSB and would not cover the shaved gas block. Fortunately CarbonScoring traded me his 12".

The other was a project to see how cheaply I could put together a quality rifle out of spares lying around. The only part I had to buy was the SMOS Sugar Pine for $100. Oh, and as I was whinging that I forgot to put the dust cover on before the rail, Carbon solved that problem too - Strike Industries snap-in cover. Plus he entered the Gun Trust info on the .gov site for me.A threefer! Beaucoup thanks brother.

Spares used:
6920 barrel and FH, ~200 rds fired
BCM blem upper
Mega Gator lower
Colt FA BCG
1.5x ACOG
LWRC BUIS
MAGPUL FDE
A5 buffer/tube

http://i150.photobucket.com/albums/s92/uffdaphil/image.jpg1_28.jpg (http://s150.photobucket.com/user/uffdaphil/media/image.jpg1_28.jpg.html)

Safe is so stuffed now I will have to give one or two to my brothers-in-law.

Consider me one of your BIL's

toolboxluis00200
28 May 2015, 13:19
Consider me one of your BIL's

me the second one lol

Uffdaphil
28 May 2015, 13:21
I do have one foxy little sister available. She's kinda picky though.

Computalotapus
28 May 2015, 13:34
I do have one foxy little sister available. She's kinda picky though.

I'm married.... can't we just pretend I am a BIL haha

CarbonScoring
29 May 2015, 07:15
Both rifles look great Phil. I always like seeing the C4 paired up with BCM.

Dstrbdmedic167
29 May 2015, 20:09
http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/Arcus%20Full_zpsra1wclyl.jpg

Aragorn
29 May 2015, 20:22
http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/Arcus%20Full_zpsra1wclyl.jpg

I still think that's one of the coolest AR's I've ever seen. The one Comp recently sold was right up there with it.

And BDL's red one.

....

...perhaps I need to cerakote an AR.

Dstrbdmedic167
29 May 2015, 20:25
I still think that's one of the coolest AR's I've ever seen. The one Comp recently sold was right up there with it.

And BDL's red one.

....

...perhaps I need to cerakote an AR.

Thanks man I appreciate it! It was far better than anything I could have ever expected. I'm thinking hard about sending the VP9 in to match this... So many wants. Oh and yes, yes you should. Out all all my Ar's only two are black and thats soon to change within the next week or so... The mod 3 pistol needs some color.. [:D]

GOST
29 May 2015, 20:30
I'm thinking hard about sending the VP9 in to match this... So many wants.

You should get one of those SSVI LLC/BDL jobs done on the VP9.

Dstrbdmedic167
29 May 2015, 20:32
You should get one of those SSVI LLC/BDL jobs done on the VP9.

I've been thinking about that. Talked to Damon once about pricing. Still trying to save for all of it! I'd like to have some slide work done too. I mean he'll if your gonna go might as well go all out right?

GOST
29 May 2015, 21:01
SSVI + BDL + RMR = A whole lot of money, but very very cool

Dstrbdmedic167
29 May 2015, 21:10
SSVI + BDL + RMR = A whole lot of money, but very very cool

Agreed! You want my paypal now or later? lol Ill make it happen!

Side Note: You get your requested pics!

amegatek
31 May 2015, 11:16
Windham Weaponry MPC

http://images.tapatalk-cdn.com/15/05/31/add058d687c586dfa69abaf06740faeb.jpg

http://images.tapatalk-cdn.com/15/05/31/20c73164a9e8152a7de755f7255595ef.jpg

amegatek
31 May 2015, 12:26
Removed double post

Dsully
1 June 2015, 10:22
https://farm9.staticflickr.com/8782/18297498542_a57a3680b8_b.jpg (https://flic.kr/p/tSTsQN)SD8A4865-Edit.jpg (https://flic.kr/p/tSTsQN) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr

toolboxluis00200
1 June 2015, 11:15
https://farm9.staticflickr.com/8782/18297498542_a57a3680b8_b.jpg (https://flic.kr/p/tSTsQN)SD8A4865-Edit.jpg (https://flic.kr/p/tSTsQN) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr

Sully u need to send me that horroble AR so I can properly dispose of it. Oh and the knife also lol

Dsully
1 June 2015, 11:58
Sully u need to send me that horroble AR so I can properly dispose of it. Oh and the knife also lol

Haha. I'm right on that but I can only read addresses on the Internet. Post it up ;)

GOST
1 June 2015, 12:04
Sully u need to send me that horroble AR so I can properly dispose of it. Oh and the knife also lol


Haha. I'm right on that but I can only read addresses on the Internet. Post it up ;)

If Luis posted his address no one would ever find him.

CarbonScoring
5 June 2015, 19:49
Just got this back from Atomic Tactical. Cerakoted in Atomic Bronze. I should have it built up by tomorrow. I let a friend borrow my Aeroshell. [bash]

https://farm1.staticflickr.com/514/18321427809_09249e8f0e_b.jpg

https://farm1.staticflickr.com/553/18319855538_a8a9e0980c_b.jpg

https://farm1.staticflickr.com/315/18507647555_d0d1da316f_b.jpg

toolboxluis00200
5 June 2015, 20:16
Looks good

Mecha_Arms
5 June 2015, 23:54
Just got this back from Atomic Tactical. Cerakoted in Atomic Bronze. I should have it built up by tomorrow. I let a friend borrow my Aeroshell. [bash]

https://farm1.staticflickr.com/514/18321427809_09249e8f0e_b.jpg

https://farm1.staticflickr.com/553/18319855538_a8a9e0980c_b.jpg

https://farm1.staticflickr.com/315/18507647555_d0d1da316f_b.jpg

Looks great!

I was debating a Salient set the last time they had them on sale, but passed. Still want to build one up with their BCG, but other projects have gotten in the way.

CarbonScoring
6 June 2015, 08:38
It's a well made set, but I wouldn't buy it unless they've got a sale on them. I got a deal on this set plus the BCG, otherwise I wouldn't have bought it. Nothing at all wrong with it, but you pay a lot for the SAI logo.

Dsully
7 June 2015, 17:41
https://farm9.staticflickr.com/8831/18532776036_1e2834bfa2_b.jpg (https://flic.kr/p/ueFjDj)SD8A5152-Edit.jpg (https://flic.kr/p/ueFjDj) by clicksully (https://www.flickr.com/people/114618199@N08/), on Flickr

CarbonScoring
7 June 2015, 21:36
https://farm1.staticflickr.com/341/18357441050_131fcc7eba_b.jpg

GOST
7 June 2015, 21:44
Now that's some sexy, great shot brother.

Ordnance
8 June 2015, 07:49
http://i.imgur.com/BMw0pXlh.jpg

http://i.imgur.com/LFi1vMch.jpg

http://i.imgur.com/NYrgdFQh.jpg

http://i.imgur.com/QNEbAGLh.jpg

http://i.imgur.com/wV4v7Elh.jpg

http://i.imgur.com/NMWB9lCh.jpg

http://i.imgur.com/NmdSqbih.jpg

http://i.imgur.com/IJpHOSCh.jpg

AaronP220
8 June 2015, 11:15
Man. These are great shots.

Sully, Like I said on IG - that's still one of the finest looking AR's I have ever seen.

Dsully
8 June 2015, 11:36
Thanks bud. Shoots real nice too. Got no complaints except I wish it had a better single point attachment

Former11B
8 June 2015, 20:21
PM me if you need to, Ordnance, but can I get some details on that suppressor wrap? I really need one. The mirage from my can when shooting my 16" .308 gets rough

Ordnance
9 June 2015, 15:59
PM me if you need to, Ordnance, but can I get some details on that suppressor wrap? I really need one. The mirage from my can when shooting my 16" .308 gets rough

Check your PMs.

Dstrbdmedic167
10 June 2015, 12:02
trying something new....

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/2nd%20Attemt_zpskkszukyr.jpg

Deadwing
11 June 2015, 02:24
Nice shot! I need to get off my ass and learn how to take better pictures!

voodoo_man
13 June 2015, 19:31
http://i.imgur.com/pVUXex9.jpg

Dstrbdmedic167
13 June 2015, 20:10
Broadening my horizons..

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/Arcus%20Outside1_zpsubonxqfy.jpg

Aragorn
13 June 2015, 20:43
Broadening my horizons..

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/Arcus%20Outside1_zpsubonxqfy.jpg

Dude. Seriously. That gun is way too good looking,

Dstrbdmedic167
13 June 2015, 20:50
Dude. Seriously. That gun is way too good looking,

Thanks! Blowndeadline killed it.. May not be for everyone(UW hehe) but this was strickly a fun build. Did I ever post the "rifle" from Destiny it was themed after?

Aragorn
13 June 2015, 21:12
Thanks! Blowndeadline killed it.. May not be for everyone(UW hehe) but this was strickly a fun build. Did I ever post the "rifle" from Destiny it was themed after?

Yeah you did when I had no idea wtf the Arcus rifle was.

Dstrbdmedic167
13 June 2015, 21:13
Yeah you did when I had no idea wtf the Arcus rifle was.

Couldn't remember thanks! Mike actually said it was one of his faves as well. I may be partial but I have to agree!

voodoo_man
15 June 2015, 06:04
http://i.imgur.com/9ZqX7CT.jpg

GOST
15 June 2015, 08:16
Very nice, any glass going on her?

Jerry R
15 June 2015, 08:17
A VERY nice setup !!

voodoo_man
15 June 2015, 08:24
Very nice, any glass going on her?

It has an SR4c on it, but the optic has a red dot (illuminated) that jumps around when I fire the gun. So I sent it back for warranty.

UWone77
15 June 2015, 08:53
Those SL stocks are growing on me for SBR's.

Dstrbdmedic167
15 June 2015, 09:06
Those SL stocks are growing on me for SBR's.

I used one on both of Slippers SBR's. I may end up picking one up next time I need a stock. I really liked them.

voodoo_man
15 June 2015, 09:37
Those SL stocks are growing on me for SBR's.

Do it.

I am a huge fan, ran that one on two uppers on various days/weekends of training, about as comfortable as it gets.

AaronP220
15 June 2015, 09:39
Finally took some non-iPhone pics of the Cross Machine Tool / WarSport hybrid before it goes for Cerakote this weekend.

http://i.imgur.com/UYty78o.jpg
http://i.imgur.com/nnyw3cf.jpg
http://i.imgur.com/Gv6AhuV.jpg
http://i.imgur.com/qkYYDW4.jpg


This is a really high clarity photo which some people don't like but I think it looks pretty cool.
http://i.imgur.com/LD37a5x.jpg

Munition
15 June 2015, 11:24
Think I need to spend more time here.

https://farm9.staticflickr.com/8830/16839375984_e716027188_h.jpg

toolboxluis00200
15 June 2015, 11:35
Think I need to spend more time here.

https://farm9.staticflickr.com/8830/16839375984_e716027188_h.jpg

You look familiar lol

AaronP220
15 June 2015, 12:35
Think I need to spend more time here.

https://farm9.staticflickr.com/8830/16839375984_e716027188_h.jpg

Wow. That is a killer rifle!!

GOST
15 June 2015, 12:48
Think I need to spend more time here.

https://farm9.staticflickr.com/8830/16839375984_e716027188_h.jpg

Beautiful rifle, I've always liked your work on TOS. Hope you stick around.

Mecha_Arms
15 June 2015, 19:25
Beautiful rifle, I've always liked your work on TOS. Hope you stick around.

I agree. Here all the threads are High Quality pic threads.

tact
15 June 2015, 20:00
http://images.tapatalk-cdn.com/15/06/15/e5c3a7d5fa3326e1966b45c8a4e49f2e.jpg

Tyrannosaur
16 June 2015, 05:15
http://images.tapatalk-cdn.com/15/06/15/e5c3a7d5fa3326e1966b45c8a4e49f2e.jpg

Man that's nice. Love those Battle Arms lowers... wish they would become available again. Great shot though love the disrupted cerekote

Slippers
16 June 2015, 10:36
http://i.imgur.com/mGDSuzG.jpg

Munition
16 June 2015, 11:57
https://farm4.staticflickr.com/3852/15162824365_0c8e934a9a_b.jpg

toolboxluis00200
16 June 2015, 12:35
Very nice to bad u did not get bullet fling out all so

Munition
16 June 2015, 15:40
Yeah I don't have the equipment for that. To even see the round in flight with any clarity, you would need a very expensive high speed camera.

toolboxluis00200
16 June 2015, 15:50
Yeah I don't have the equipment for that. To even see the round in flight with any clarity, you would need a very expensive high speed camera.

Photochopit. Lol

UWone77
16 June 2015, 15:51
Photochopit. Lol

Luis your spelling is worse than usual... must be the meds. [:D]

Former11B
16 June 2015, 17:16
I got photobombed by my spotter-in-training

http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpsiardhnez.jpg

GOST
16 June 2015, 17:31
Great pic!

Txfilmmaker
16 June 2015, 17:35
I got photobombed by my spotter-in-training

http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpsiardhnez.jpg

:-) Happy Father's Day! (It's almost here.)
Love the picture.


Sent from my iPhone using Tapatalk

toolboxluis00200
16 June 2015, 17:50
Luis your spelling is worse than usual... must be the meds. [:D]

lol i did it on purpose

toolboxluis00200
16 June 2015, 17:51
I got photobombed by my spotter-in-training

http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpsiardhnez.jpg

that is cute photo-bomb

Munition
17 June 2015, 15:49
lol post processing has its place, but you're going too far if you add fake bullets...just saying lol.

pic thread:

https://farm8.staticflickr.com/7602/17030196135_8ac5cbe14f_b.jpg

toolboxluis00200
17 June 2015, 16:18
lol post processing has its place, but you're going too far if you add fake bullets...just saying lol.

pic thread:

https://farm8.staticflickr.com/7602/17030196135_8ac5cbe14f_b.jpg

[BD][BD] !!

Ordnance
18 June 2015, 10:34
These aren't getting much love on social media, which is sad because I think most people have no idea what they are, lol...

http://i.imgur.com/3HmhKQqh.jpg

http://i.imgur.com/cJMhygYh.jpg

voodoo_man
18 June 2015, 10:41
those are pretty awesome

UWone77
18 June 2015, 10:44
I used to keep a set on my desk for paper weights. Not sure what happened to mine. Probably got lost in a few moves.

Ordnance
18 June 2015, 11:16
I used to keep a set on my desk for paper weights. Not sure what happened to mine. Probably got lost in a few moves.

Lol... That's what the grenade is for [BD]

Dsully
22 June 2015, 07:12
https://c1.staticflickr.com/1/538/18395496364_46e69bc8f0_b.jpg (https://flic.kr/p/u2xJbq)SD8A5509-Edit.jpg (https://flic.kr/p/u2xJbq) by Dsully (https://www.flickr.com/photos/clicksully/), on Flickr

Dstrbdmedic167
24 June 2015, 09:28
Shall not be infringed!

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/Aero%202A_zpsreid0zrc.jpg

CarbonScoring
26 June 2015, 10:15
https://farm4.staticflickr.com/3850/18257861883_d5d594370a_b.jpg

Pyzik
26 June 2015, 10:16
Shall not be infringed!

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/Aero%202A_zpsreid0zrc.jpg
Nice

schambers
26 June 2015, 10:36
https://farm4.staticflickr.com/3850/18257861883_d5d594370a_b.jpg

Diggin' the clean look. Do you have any pictures of the reverse side?

Specs? Accepts glock mags?

CarbonScoring
27 June 2015, 06:45
Diggin' the clean look. Do you have any pictures of the reverse side?

Specs? Accepts glock mags?

I believe they accept Glock mags, but I'm not 100% sure.

https://farm6.staticflickr.com/5603/18690822910_cb8efcfae7_b.jpg

voodoo_man
27 June 2015, 18:18
http://i.imgur.com/KJTYKCB.jpg

voodoo_man
28 June 2015, 17:59
http://i.imgur.com/0dJfPth.jpg

Pyzik
28 June 2015, 19:12
I am not a good painter, supposed to be a multicam(ish) knock off, but I'm happy. I do think I need to add more green and darker brown.
Looks good for a dead foliage camo but in nice live foliage it's quite bright. (not that it really matters as you'd have to paint it for each season, realistically)

This is the WEVO Troy upper.
Stock will be replaced shortly. Going with the STR-L. Grip will also be changed. That's why it's not painted.

https://c1.staticflickr.com/1/349/19224137506_16ec5247da_b.jpg (https://flic.kr/p/vhLJjE)
Rattle Can Multicam (https://flic.kr/p/vhLJjE) by David Pyzik (https://www.flickr.com/photos/damagephotos/), on Flickr

https://c1.staticflickr.com/1/535/19064098849_16036c2dd7_b.jpg (https://flic.kr/p/v3Cupt)
Rattle Can Multicam 2 (https://flic.kr/p/v3Cupt) by David Pyzik (https://www.flickr.com/photos/damagephotos/), on Flickr

toolboxluis00200
28 June 2015, 19:23
first one looks good

Pyzik
28 June 2015, 19:41
first one looks good
Thanks. Yeah I don't like the second one much either. Tis why I think I should add some green.

voodoo_man
29 June 2015, 03:50
http://imgur.com/zGVQkEA.jpg

Ordnance
29 June 2015, 10:03
http://i.imgur.com/9deSnUlh.jpg

http://i.imgur.com/ufoE5Dbh.jpg

http://i.imgur.com/GchWwuah.jpg

I like this photo because most people won't be able to tell just looking at it, but the rifle is on an platform that's 15'+ above the ground, on a platform that's been cut-off.

http://i.imgur.com/RPJvscEh.jpg

Cotton68spc
4 July 2015, 08:50
http://images.tapatalk-cdn.com/15/07/04/ddb78cb35ebfef4c7c679b93d38ae79a.jpg
My first attempt at white background/light box photography


Check me out on YouTube and Facebook

Dstrbdmedic167
5 July 2015, 14:06
New lighting and lens setup. Still working out the kinks... thought? I was on the fence for some reason.. I'm always my own worst critic...

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/308%20new%20lighting%20_zpstjnacsnu.jpg

toolboxluis00200
5 July 2015, 15:16
Is that the .308 u bin trying to sale?

Dstrbdmedic167
5 July 2015, 15:18
Is that the .308 u bin trying to sale?

Yea

alamo5000
5 July 2015, 16:02
http://i.imgur.com/9deSnUlh.jpg

http://i.imgur.com/ufoE5Dbh.jpg

http://i.imgur.com/GchWwuah.jpg

I like this photo because most people won't be able to tell just looking at it, but the rifle is on an platform that's 15'+ above the ground, on a platform that's been cut-off.

http://i.imgur.com/RPJvscEh.jpg


Ordnance, those shots look great!

voodoo_man
7 July 2015, 07:09
http://i.imgur.com/tWRg55w.jpg

GOST
7 July 2015, 07:19
Cool pic Voodoo.

AaronP220
7 July 2015, 07:34
Finished the Warsport for now...Everyone has green, grey, black, tan, brown these days. Wanting to make something that I wouldn't likely see someone else with I sat down with some Blue Titanium, Tungsten, Black and maybe a little home made purple and started mixing.
http://i.imgur.com/FUuGVqu.jpg
http://i.imgur.com/JrrsgSC.jpg
http://i.imgur.com/v9GPpIA.jpg

Jerry R
7 July 2015, 07:37
New lighting and lens setup. Still working out the kinks... thought? I was on the fence for some reason.. I'm always my own worst critic...

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/308%20new%20lighting%20_zpstjnacsnu.jpg

Bright, crisp, clean - what's not to like? How about a background shot showing your lighting setup?

Dstrbdmedic167
7 July 2015, 07:39
Bright, crisp, clean - what's not to like? How about a background shot showing your lighting setup?

I'm at work today but essentially just a makeshift PVC lightbox like you made in the photo how to thread and picked up a used Alienbees B800 strobe light and 48" umbrella.

Dstrbdmedic167
7 July 2015, 07:40
Finished the Warsport for now...Everyone has green, grey, black, tan, brown these days. Wanting to make something that I wouldn't likely see someone else with I sat down with some Blue Titanium, Tungsten, Black and maybe a little home made purple and started mixing.

Nice man! I really dig that color!

2ATA
7 July 2015, 07:42
New lighting and lens setup. Still working out the kinks... thought? I was on the fence for some reason.. I'm always my own worst critic...

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/308%20new%20lighting%20_zpstjnacsnu.jpg

Who's the bearded guy in the finish?

Slippers
7 July 2015, 07:52
Who's the bearded guy in the finish?

Non-licensed kryptek Santa Claus :)

Dstrbdmedic167
7 July 2015, 07:58
Who's the bearded guy in the finish?

It's Mad Custom Coatings version of Kryptek...

Munition
8 July 2015, 12:22
https://farm9.staticflickr.com/8667/15285914513_9690325a01_b.jpg

Aragorn
8 July 2015, 12:29
Finished the Warsport for now...Everyone has green, grey, black, tan, brown these days. Wanting to make something that I wouldn't likely see someone else with I sat down with some Blue Titanium, Tungsten, Black and maybe a little home made purple and started mixing.
http://i.imgur.com/FUuGVqu.jpg
http://i.imgur.com/JrrsgSC.jpg
http://i.imgur.com/v9GPpIA.jpg

Hey that's sweet.

CarbonScoring
10 July 2015, 09:13
Non-licensed kryptek Santa Claus :) [:D]

Dstrbdmedic167
10 July 2015, 18:26
Grey is the new black...

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/277WLV%20Grey_zpspntmxmyu.jpg

Cotton68spc
10 July 2015, 19:54
I like it


Check me out on YouTube and Facebook

Pyzik
11 July 2015, 15:20
Grey is the new black...

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/277WLV%20Grey_zpspntmxmyu.jpg
That is awesome. Pistol length gas??

Crappy phone pic but picked up a ACS-L today for only $30!

Off color but I'm painting it anyway...

http://images.tapatalk-cdn.com/15/07/11/49c47caa682371979e184d4e130b3fe6.jpg

Dstrbdmedic167
11 July 2015, 15:23
That is awesome. Pistol length gas??

Crappy phone pic but picked up a ACS-L today for only $30!

Off color but I'm painting it anyway...

It is. It's made to run 277wlv subs so they went with a pistol gas.

That's a nice score! I got a set of MFT flip up sights for $32 off eBay that were only used once.

Jerry R
11 July 2015, 16:38
Grey is the new black...

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/277WLV%20Grey_zpspntmxmyu.jpg

On the ShockWave Brace, did you use their kit with the buffer tube, or another pistol buffer tube?

Dstrbdmedic167
11 July 2015, 16:42
On the ShockWave Brace, did you use their kit with the buffer tube, or another pistol buffer tube?

I did the brace and buffet tube. For as cheap as it is and it has the dimples that allow you to set it in place. I recommend it with the brace.

Thompson
11 July 2015, 22:40
As they say ... It's all about the Jack [:D]

https://farm1.staticflickr.com/487/19433722278_bc437a1fdc_h.jpg

Jerry R
12 July 2015, 08:29
I did the brace and buffet tube. For as cheap as it is and it has the dimples that allow you to set it in place. I recommend it with the brace.

Thanks. I really want to try the VLTOR A5 Pistol system, and ordered it. Want to try the ShockWave too. Will probably order the entire kit, then see how just the blade works with the A5 tube. If "less than ideal" I will swap the tube kits and install the ShockWave tube and parts.

Dstrbdmedic167
12 July 2015, 10:49
As they say ... It's all about the Jack [:D]

https://farm1.staticflickr.com/487/19433722278_bc437a1fdc_h.jpg

Good shot brother! As for the jack...

Thompson
12 July 2015, 17:53
Good shot brother! As for the jack...
Thanks! Glad you like it.

Deep down, you know it's all about the Jack ... UW knows it ;)

UWone77
12 July 2015, 17:55
Thanks! Glad you like it.

Deep down, you know it's all about the Jack ... UW knows it ;)

You have your head up Haley's ass so far, I don't know where he ends and you begin... and I mean that in the nicest possible way. [:D]

The entire concept of a signature rifle makes me laugh. Exactly same gun, more money, for... no real apparently reason or benefit.

I'll stick to a standard BCM if I want a BCM rifle.

GOST
12 July 2015, 18:05
Have to agree with UW. Besides if I were paying extra for a name on a rifle I would rather it be the name of my trust.[:D]

Thompson
12 July 2015, 18:14
The entire concept of a signature rifle makes me laugh. Exactly same gun, more money, for... no real apparently reason or benefit.
Hey man it's got that tactical disruptive grey camo - no one will be able to see me coming :P

But yeah - I couldn't agree with you more, it's really nothing more than a BCM with a name attached to it.

PS - Haven't you heard, I'm next in line to take over for TH after he retires [:D]

Dstrbdmedic167
12 July 2015, 18:14
You have your head up Haley's ass so far, I don't know where he ends and you begin... and I mean that in the nicest possible way. [:D]

The entire concept of a signature rifle makes me laugh. Exactly same gun, more money, for... no real apparently reason or benefit.

I'll stick to a standard BCM if I want a BCM rifle.

Bwahaha is there really a nice way to put that? [BD]

UWone77
12 July 2015, 18:22
Well at least you didn't blow $2900 for a Costa LaRue gun ... complete with no sights. Insane. [BD]

alamo5000
12 July 2015, 18:26
Well at least you didn't blow $2900 for a Costa LaRue gun ... complete with no sights. Insane. [BD]

Say WHAT?! That's how much those things go for? Are you frickin' kidding me?

UWone77
12 July 2015, 18:28
Say WHAT?! That's how much those things go for? Are you frickin' kidding me?

http://www.laruetactical.com/costa-edition

500 suckers got hooked and lined for a gun with a 10k round barrel life. I guess that's fine since most will never see the range.

alamo5000
12 July 2015, 18:36
http://www.laruetactical.com/costa-edition

500 suckers got hooked and lined for a gun with a 10k round barrel life. I guess that's fine since most will never see the range.

I am seriously shaking my head. I think I put $1800 or so into mine (not including optics) and I didn't scrimp on anything. I pondered getting a mountain barrel instead of a stainless one but either or I STILL wouldn't be at that price. I could have built an entirely new upper with a mountain barrel and had two uppers instead of one and had money left over.

alamo5000
12 July 2015, 18:38
http://www.laruetactical.com/costa-edition

500 suckers got hooked and lined for a gun with a 10k round barrel life. I guess that's fine since most will never see the range.

I seriously wonder what the deal is with the 'celebrities' of the gun community. Maybe we should start a frickin' youtube channel or something.

Thompson
12 July 2015, 18:51
Well at least you didn't blow $2900 for a Costa LaRue gun ... complete with no sights. Insane. [BD]
Haha - yep, was gonna mention that - then I forgot.

But seriously .. no irons WTF ....

.... so ... if I instead got the BCM EAG rifle, would you approve? [BD]


I seriously wonder what the deal is with the 'celebrities' of the gun community. Maybe we should start a frickin' youtube channel or something.
Only if Luis is the star of the channel. [:D]

alamo5000
12 July 2015, 18:58
Only if Luis is the star of the channel. [:D]

I seriously was wondering why everyone picked on Luis when I first got here. I thought either he was retarded or an immigrant so I was wondering why everyone was messing with him. I was like 'seriously? are these guys a bunch of assholes or what?'

Then I saw him on youtube and figured out that he speaks English just fine. He just can spell worth a shit. Then it all came together and made sense. [:D]

GOST
12 July 2015, 19:08
I seriously was wondering why everyone picked on Luis when I first got here. I thought either he was retarded or an immigrant so I was wondering why everyone was messing with him. I was like 'seriously? are these guys a bunch of assholes or what?'

Then I saw him on youtube and figured out that he speaks English just fine. He just can spell worth a shit. Then it all came together and made sense. [:D]
Picking on James is more fun.[:D] No one will ever touch the RAC video thread. Did you guys know that he deleted the video?

alamo5000
12 July 2015, 19:13
Picking on James is more fun.[:D] No one will ever touch the RAC video thread. Did you guys know that he deleted the video?

Yeah, he got it pretty bad I do have to admit. LOL

GOST
12 July 2015, 19:18
Yeah, he got it pretty bad I do have to admit. LOL

He deserved it, that comes with territory of posting videos and being the internet celebrity that he is.[:D]

toolboxluis00200
12 July 2015, 19:30
I seriously was wondering why everyone picked on Luis when I first got here. I thought either he was retarded or an immigrant so I was wondering why everyone was messing with him. I was like 'seriously? are these guys a bunch of assholes or what?'

Then I saw him on youtube and figured out that he speaks English just fine. He just can spell worth a shit. Then it all came together and made sense. [:D]

I was just born that way. [BD]