UWone77
1 August 2013, 01:59
TR Enabling (http://www.shop.lower80.com/main.sc)offers a Lower Parts Kit (http://www.shop.lower80.com/Complete-Lower-Parts-Kit-0001LPK.htm) that I thought was a bit different than your standard parts kit. First I noticed that it includes a micro-polished surfaces on the trigger and hammer. That's usually a no-no to polish the stock trigger as it would render it out of spec and potential cause issues.
However, TR Enabling (http://www.shop.lower80.com/main.sc) has stated, "We are actually doing the Polish during the grinding process. Instead of doing a rough cut and then the standard MilSpec grind, we actually use a Finer stone at a slower more precise feed rate to achieve the smoother and more consistent finish. Then we use a polishing wheel to give it the over the top glass smooth surface. For durability the polished surface actually increases the life expectancy due to less friction at the surface. We also have a soon to be released Nickel Teflon Coated hammer and trigger, that offers self lubricating properties, a higher Rockwell surface hardness, and an unbelievably smooth and consistent trigger pull, for a standard trigger mechanism."
http://i1016.photobucket.com/albums/af282/richdkim77/1077172_10201613845487389_610237813_o_zps41b7ff32. jpg (http://s1016.photobucket.com/user/richdkim77/media/1077172_10201613845487389_610237813_o_zps41b7ff32. jpg.html)
Interesting to say the least. For $59 it maybe worth a try. Here are the specs:
Each of our lower parts kits ships with an enhanced hammer and trigger assembly. We start with a quality Mil-Spec hammer and trigger and micro polish the engagement surfaces. This gives the shooter excellent trigger feel and a very clean break.
- Micro-Polished Engagement Surfaces on Both Hammer and Trigger
- Includes All Parts Neccessary To Complete Your Stripped Lower Receiver
- Cadium Plated Detents
- All Metal Parts
- Manufactured In The U.S.A.
Check out the Lower Parts kit or purchase it here (http://www.shop.lower80.com/Complete-Lower-Parts-Kit-0001LPK.htm)
http://i1016.photobucket.com/albums/af282/richdkim77/TR20Enabling20LPK_zps7235bc63.jpg (http://s1016.photobucket.com/user/richdkim77/media/TR20Enabling20LPK_zps7235bc63.jpg.html)
However, TR Enabling (http://www.shop.lower80.com/main.sc) has stated, "We are actually doing the Polish during the grinding process. Instead of doing a rough cut and then the standard MilSpec grind, we actually use a Finer stone at a slower more precise feed rate to achieve the smoother and more consistent finish. Then we use a polishing wheel to give it the over the top glass smooth surface. For durability the polished surface actually increases the life expectancy due to less friction at the surface. We also have a soon to be released Nickel Teflon Coated hammer and trigger, that offers self lubricating properties, a higher Rockwell surface hardness, and an unbelievably smooth and consistent trigger pull, for a standard trigger mechanism."
http://i1016.photobucket.com/albums/af282/richdkim77/1077172_10201613845487389_610237813_o_zps41b7ff32. jpg (http://s1016.photobucket.com/user/richdkim77/media/1077172_10201613845487389_610237813_o_zps41b7ff32. jpg.html)
Interesting to say the least. For $59 it maybe worth a try. Here are the specs:
Each of our lower parts kits ships with an enhanced hammer and trigger assembly. We start with a quality Mil-Spec hammer and trigger and micro polish the engagement surfaces. This gives the shooter excellent trigger feel and a very clean break.
- Micro-Polished Engagement Surfaces on Both Hammer and Trigger
- Includes All Parts Neccessary To Complete Your Stripped Lower Receiver
- Cadium Plated Detents
- All Metal Parts
- Manufactured In The U.S.A.
Check out the Lower Parts kit or purchase it here (http://www.shop.lower80.com/Complete-Lower-Parts-Kit-0001LPK.htm)
http://i1016.photobucket.com/albums/af282/richdkim77/TR20Enabling20LPK_zps7235bc63.jpg (http://s1016.photobucket.com/user/richdkim77/media/TR20Enabling20LPK_zps7235bc63.jpg.html)