PDA

View Full Version : AR15 pistol thread



Stickman
1 August 2013, 13:20
This thread is for AR15 pistol pictures, not the legal discussion of builds. Feel free to start that as a new thread.

http://stickman.rainierarms.com/galleries/Handguns/STCK6476-1200-Stick.jpg


http://stickman.rainierarms.com/galleries/Handguns/STCK6477-1200-Stick.jpg

Stickman
1 August 2013, 13:20
http://stickman.rainierarms.com/galleries/Handguns/STCK6478-1200-Stick.jpg


http://stickman.rainierarms.com/galleries/Handguns/STCK6479-1200-Stick.jpg

Stickman
1 August 2013, 13:21
http://stickman.rainierarms.com/galleries/Handguns/STCK6481-1200-Stick.jpg


http://stickman.rainierarms.com/galleries/Handguns/STCK6482-1200-Stick.jpg

Jerry R
1 August 2013, 14:21
I know it is a photo thread, but I have to ask --------- How is the light holding up on top of the Battle Comp?

UWone77
1 August 2013, 15:12
I know it is a photo thread, but I have to ask --------- How is the light holding up on top of the Battle Comp?

Jerry, Stick has a few thousand rounds through that upper, and I can tell you first hand the Surefire is fine. It gets pretty dirty, but nothing a rag and some elbow grease won't cure. I don't think it's the most ideal setup personally, but great for guys who want a light but are not allowed or don't know how to add rails.

zero7one
1 August 2013, 19:09
http://farm3.staticflickr.com/2892/9324229008_a2fb45a2d5_b.jpg

zero7one
1 August 2013, 19:09
http://farm3.staticflickr.com/2820/9324212380_92da1e1f64_b.jpg

zero7one
1 August 2013, 19:10
http://farm9.staticflickr.com/8359/8320532857_e3a5a0a7cb_b.jpg

UWone77
9 August 2013, 23:28
New Pistol Upper in 300AAC Blackout

http://i1016.photobucket.com/albums/af282/richdkim77/HandCannon_zpsfd6b223c.jpg (http://s1016.photobucket.com/user/richdkim77/media/HandCannon_zpsfd6b223c.jpg.html)

Computalotapus
10 August 2013, 08:11
http://farm9.staticflickr.com/8359/8320532857_e3a5a0a7cb_b.jpg

This is one of my favorite pictures from you. This thing reminds me of one of my ART team members. A short, stocky pissed off Italian.

Peckerinak
15 September 2014, 12:30
http://tapatalk.imageshack.com/v2/14/09/15/93dd83e14e9bce37cf92abfc08972317.jpg

My "cheap" pistol build.
Started as a left over no name stripped upper
PSA lower I got cheap
PSA LPK I got on sale that I polished the trigger
Phase 5 buffer( I think)
Rainier Arms 10.5" match Barrel
Rainier Arms 12" Evo Rail
Rainier Arms low pro gas block and tube
Rainier Arms BCG
BCM mod 3 CH
Dragons Breath comp
Foliage Magpul Furniture and BUIS
Vortex Sparc

UWone77
16 September 2014, 09:37
http://i849.photobucket.com/albums/ab55/UWone77/IMG_1363_zps9d3a7588.jpg (http://s849.photobucket.com/user/UWone77/media/IMG_1363_zps9d3a7588.jpg.html)

JJ762mm
25 September 2014, 14:06
http://i769.photobucket.com/albums/xx336/Jlottes1/DSCN0767_zpsede7a467.jpg

okdonk
25 September 2014, 22:06
I'm following the "SB15 Hype", so here it is..

http://imagizer.imageshack.us/v2/800x600q90/844/fubf.jpg (https://imageshack.com/i/ngfubfj)

http://imagizer.imageshack.us/v2/800x600q90/673/oaIL7u.jpg (https://imageshack.com/i/ipoaIL7uj)

http://imagizer.imageshack.us/v2/800x600q90/633/jjZIAb.jpg (https://imageshack.com/i/hljjZIAbj)

http://imagizer.imageshack.us/v2/800x600q90/661/O2khK1.jpg (https://imageshack.com/i/idO2khK1j)

http://imagizer.imageshack.us/v2/800x600q90/904/7Fz1RV.jpg (https://imageshack.com/i/p47Fz1RVj)

http://imagizer.imageshack.us/v2/800x600q90/746/4ciIUi.jpg (https://imageshack.com/i/kq4ciIUij)

http://imagizer.imageshack.us/v2/800x600q90/537/dx2u1n.jpg (https://imageshack.com/i/exdx2u1nj)

DutyUse
25 September 2014, 22:53
Okdonk that's an amazing looking pistol! I really like the stuff coming out of NorthTech right now.

okdonk
25 September 2014, 23:13
Thank you. I myself was amazed with the finish and quality of NTD.

DutyUse
25 September 2014, 23:15
Thank you. I myself was amazed with the finish and quality of NTD.

Just seen the spike's build. Looks great too. What was the turn around time with BDL?

okdonk
25 September 2014, 23:17
Total 2 weeks from the day i shipped them out to the day i received them back.

Simi-audamadik
25 September 2014, 23:51
I just finished my first AR build of any kind, last weekend...an AR pistol. I took all my parts to the guys over at Radical Firearms (in Stafford, TX) and they "tightened" it all up for me as well as doing a 5 round function test. It went bang every time. YES! I finally got to shoot it Wednesday and boy was I happy with the result!

1) Spikes upper, lower, enhanced lower parts kit, melonite gas tube, and Barking Spider 2.
2) Yankee Hill 10.5 ", 1 in 9, melonite barrel and low profile gas block.
3) WMD Nickel Boron charge handle and BCG.
4) Radical Firearms 12" keymod rail.
5) KAK Industries buffer tube kit with Sig 15 Arm Brace.
6) Gear offset rail mount with Inforce WML HSP.
7) Magpul AFG
8) Eotech and Mapul BUIS

The weapon
http://img.photobucket.com/albums/v319/Simi-audamadik/AR%20pistol%20build/ARPistol.jpg (http://smg.photobucket.com/user/Simi-audamadik/media/AR%20pistol%20build/ARPistol.jpg.html)

The result
http://img.photobucket.com/albums/v319/Simi-audamadik/AR%20pistol%20build/50yd5shotgroup2.jpg (http://smg.photobucket.com/user/Simi-audamadik/media/AR%20pistol%20build/50yd5shotgroup2.jpg.html)

The shots that are almost dead center were the last 5 rounds at 50 yds. I would like to say this was offhand...but I cannot tell a lie. ;) I used a Harris bipod on the front while I was doing the sight in. I CAN'T hold that steady. [:D]

Later!

Simi

ksenter
28 September 2014, 14:53
http://i270.photobucket.com/albums/jj95/kennysenter/gun%20stuff/arpistol_002_zps991ef0b7.jpg (http://s270.photobucket.com/user/kennysenter/media/gun%20stuff/arpistol_002_zps991ef0b7.jpg.html)

http://i270.photobucket.com/albums/jj95/kennysenter/gun%20stuff/arpistol_001_zpsb758bc78.jpg (http://s270.photobucket.com/user/kennysenter/media/gun%20stuff/arpistol_001_zpsb758bc78.jpg.html)

the Lantac is FIERCE on the end of a 7.5" powder burn. Incredible fireballs to both sides of the comp.

http://i270.photobucket.com/albums/jj95/kennysenter/gun%20stuff/pistoltile_01_zpsb35033b0.jpg (http://s270.photobucket.com/user/kennysenter/media/gun%20stuff/pistoltile_01_zpsb35033b0.jpg.html)

http://i270.photobucket.com/albums/jj95/kennysenter/gun%20stuff/arpistol_002.jpg (http://s270.photobucket.com/user/kennysenter/media/gun%20stuff/arpistol_002.jpg.html)

PSA lower with CMMG LPK
KNS anti-rotation pins
Magpul ASAP
PSA/RRA pistol buffer tube
SigTac arm brace
Magpul poly trigger guard
Magpul BAD lever

DelTon stripped upper
BCM charging handle mod4
YHM chrome BCG
White Oak Armamement 7.5" 223wylde 1/7 barrel
BCM low-pro gas block
Troy rail
Magpul AFG
Lantac Dragon
ACE bottle opener, hah

Vortex sparc

toolboxluis00200
1 October 2014, 15:16
http://i183.photobucket.com/albums/x151/toolboxluis/fun1of1_zpse57561dd.jpg (http://s183.photobucket.com/user/toolboxluis/media/fun1of1_zpse57561dd.jpg.html)

toolboxluis00200
1 October 2014, 15:18
http://i183.photobucket.com/albums/x151/toolboxluis/honey101of1_zps05b8a791.jpg (http://s183.photobucket.com/user/toolboxluis/media/honey101of1_zps05b8a791.jpg.html)

toolboxluis00200
1 October 2014, 15:19
http://i183.photobucket.com/albums/x151/toolboxluis/honey101of1-2_zpsaa7b3b06.jpg (http://s183.photobucket.com/user/toolboxluis/media/honey101of1-2_zpsaa7b3b06.jpg.html)

RowlandP
4 October 2014, 17:42
http://i1125.photobucket.com/albums/l590/RowlandParks/Firearms/051_zps0eba8dec.jpg (http://s1125.photobucket.com/user/RowlandParks/media/Firearms/051_zps0eba8dec.jpg.html)

Chevtec
10 October 2014, 05:13
7.5" Radical Arms barrel built on a Noveske chainsaw.

https://scontent-b-ord.xx.fbcdn.net/hphotos-xap1/v/l/t1.0-9/10689699_361299970700577_2319357391823317507_n.jpg ?oh=3ae81bab13f7e571e2c6689cb98c87fa&oe=54AB15C2

https://scontent-a-ord.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10702140_360313887465852_2726903703552403813_n.jpg ?oh=7b5574776aaa3b325c575362908d9999&oe=54B63BA6

Chevtec
7 November 2014, 19:59
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10702096_10102894059159274_4144184921990913975_n.j pg?oh=f4eaa2e8750b8fb9ad45e41b1358f07e&oe=54D9ECAE&__gda__=1423274961_a0648088667905024b14bdba097b513 4


https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10616199_10102894782195304_8315739010673478386_n.j pg?oh=03d65d92d101bd73ddaeb61e60f82ce6&oe=54D476F1&__gda__=1425285268_9216069e54627386c9693ee84b93aad 7

ksenter
8 November 2014, 20:08
would the buis front sight block the designator if in front? Would lengthen your sight radius quite significantly if swapped.

Former11B
8 November 2014, 20:36
would the buis front sight block the designator if in front? Would lengthen your sight radius quite significantly if swapped.

I doubt it would interfere....they usually take fixed front sight posts into account like on .mil rifles when designed

/pic thread
http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpse6770649.jpg

Ride4frnt
9 November 2014, 08:07
I doubt it would interfere....they usually take fixed front sight posts into account like on .mil rifles when designed

/pic thread
http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpse6770649.jpg

You are not making my decision to use a A2 FSB any easier...

Former11B
9 November 2014, 09:07
You are not making my decision to use a A2 FSB any easier...

I never minded a fixed front sight. I don't have them on my ARs but I like them...some classic feel or something... I also like having the forward assist, brass deflector, and all that.

I feel like the short barreled ARs require a can also (especially under 12" but I'm suppressor biased)!

Also, my can is so hot in that pic the white portion in the center cooled back down to FDE in about 20 minutes. It's a 7.62 suppressor and even at 20oz it feels right at home on that pistol

Chevtec
10 November 2014, 10:41
would the buis front sight block the designator if in front? Would lengthen your sight radius quite significantly if swapped.

It won't interfere with the laser, but the flashlight splashed the base of the BUIS somewhat and i did notice some shadowing on the wall across the room. If it was a fixed A2 sight it wouldn't interfere at all. I'm sacrificing sight radius for hand placement and control, as the buttons for the light and laser are on top of the box. After all they are just backups, and the pigtail remote it came with is a joke.

UWone77
12 November 2014, 14:09
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2452_zps149d442a.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2452_zps149d442a.jpg.html)

MonkeyBomb
20 November 2014, 18:59
I got in some of my parts for an AR Rebuild I am starting. I installed the new barrel nut, gas block and test fitted the new hand guard.
I think I know why I like these things now. Apparently, I am still very much a kid watching the very first Star Wars in 1977.

http://i198.photobucket.com/albums/aa315/Stemshot/Blaster_zpsf80a089a.jpg

http://i198.photobucket.com/albums/aa315/Stemshot/BlasterStormTrooper_zps5e2b9a4f.jpg

JHoward
20 November 2014, 21:00
http://i100.photobucket.com/albums/m5/ohmydodge/bd455499-e332-42b8-a560-663c7a3a092d_zps5fd71b1c.jpg (http://s100.photobucket.com/user/ohmydodge/media/bd455499-e332-42b8-a560-663c7a3a092d_zps5fd71b1c.jpg.html)

Got a "prettier" picture today.

http://i100.photobucket.com/albums/m5/ohmydodge/a511a482-a72f-406d-bf6a-1b75d426ae98_zpsb6d66d08.jpg (http://s100.photobucket.com/user/ohmydodge/media/a511a482-a72f-406d-bf6a-1b75d426ae98_zpsb6d66d08.jpg.html)

HeavyDuty
6 December 2014, 10:11
First AR pistol build:

http://i892.photobucket.com/albums/ac123/HDF62/11-5_zpsc39579b5.jpg

UWone77
6 December 2014, 12:09
First AR pistol build:

http://i892.photobucket.com/albums/ac123/HDF62/11-5_zpsc39579b5.jpg

Nice, I like the CAA Saddle vs. a ridiculous Sig Brace.

HeavyDuty
6 December 2014, 13:02
Thanks - I've handled the SIG brace, and it's not for me. I'm really liking this Thordsen RE cover and the CAA saddle.

0uTkAsT
14 December 2014, 17:19
https://scontent-b-dfw.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/10153664_10151943327450904_3002288549994080465_n.j pg?oh=c824120aaf3b1c886c244cb77fbce963&oe=553E6079

https://scontent-b-dfw.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10441217_10152025426210904_377679061480781742_n.jp g?oh=07a387944515d99af8f763c86812a8c0&oe=54F90BD2

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10458321_10152025426285904_7170042953661651701_n.j pg?oh=026c1cef4003b12a6fb0d76d6f16ea20&oe=5512CD3C&__gda__=1426933593_a6768fb274396b6c53ad180edee221a 3

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10489913_10152045686355904_7381044319547365919_n.j pg?oh=3525107e1bf13e0f31071747b5c46f6d&oe=55082A64&__gda__=1425985073_d296d8ed578151c0718b9e190ab6c70 2

https://scontent-b-dfw.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/10262256_10151919919730904_5935093566789517329_n.j pg?oh=e59459f5f2678e96a44a0c4d15cabff5&oe=550D0985

DontBuryMe
18 December 2014, 15:19
https://farm8.staticflickr.com/7565/16046402772_d83c4fa3a6_b.jpg

Ride4frnt
18 December 2014, 15:31
https://farm8.staticflickr.com/7565/16046402772_d83c4fa3a6_b.jpg

You're not helping my dilemma...

DontBuryMe
18 December 2014, 15:40
You're not helping my dilemma...

What's the dilemma?

Ride4frnt
18 December 2014, 16:34
What's the dilemma?

Well I solved the "pistol vs SBR" dilemma. Going the SBR route. But now my dilemma is do I want a fixed front sight? Something about that short barrel with the front post that gets me going.

JHoward
22 December 2014, 10:21
Duh... Of course you want a fixed FSP. The real question is 11.5 with carbine HG or 12.5 Kino configuration.

toolboxluis00200
22 December 2014, 10:34
Duh... Of course you want a fixed FSP. The real question is 11.5 with carbine HG or 12.5 Kino configuration.

i say go Kino

JHoward
22 December 2014, 10:39
I do too on an SBR.

WHSmithIV
22 December 2014, 10:42
Nice, I like the CAA Saddle vs. a ridiculous Sig Brace.

Yeah - me too. I was looking last night at putting the Thordsen kit on mine but found out that the cover won't fit the Phase 5 pistol tube. The diameter is just a little too much. I'd have to change the pistol tube. they make those saddles in FDE too (though FDE is currently out of stock).

WHSmithIV
22 December 2014, 10:44
I got in some of my parts for an AR Rebuild I am starting. I installed the new barrel nut, gas block and test fitted the new hand guard.
I think I know why I like these things now. Apparently, I am still very much a kid watching the very first Star Wars in 1977.


Yep - there certainly is something very Star Wars when it comes to AR pistols [:)]

Ride4frnt
22 December 2014, 12:08
Duh... Of course you want a fixed FSP. The real question is 11.5 with carbine HG or 12.5 Kino configuration.

I need a 9" handguard then... I only have a 12" which was my original intentions. And I want 10.5 barrel.

JHoward
22 December 2014, 12:11
Oh... 10.5...

Ride4frnt
22 December 2014, 12:18
Oh... 10.5...

Well, I'm between 10.5 and 11.5." But regardless I need a shorter rail if I want a fixed post. Have my 12" force up for trade.

JHoward
22 December 2014, 12:22
I'm just giving you a hard time. I had a 10.5 and although it wasn't too finicky with ammo, it did have a hickup every now and then. I don't notice the extra inch on my 11.5 except for the fact that it cycles everything just as good as every other rifle I've owned. I would love a 10.5" upper, as long as I already had an 11.5".

Ride4frnt
22 December 2014, 12:24
I'm just giving you a hard time. I had a 10.5 and although it wasn't too finicky with ammo, it did have a hickup every now and then. I don't notice the extra inch on my 11.5 except for the fact that it cycles everything just as good as every other rifle I've owned. I would love a 10.5" upper, as long as I already had an 11.5".

I guess a 9" rail wouldn't help me either way with a FSB on either a 10.5 or 11.5...

Computalotapus
22 December 2014, 12:25
7" on a carbine gas barrel

Former11B
22 December 2014, 12:31
But now my dilemma is do I want a fixed front sight? Something about that short barrel with the front post that gets me going.

Something like this?

http://img.photobucket.com/albums/v74/DownSouthTAS/Mobile%20Uploads/image_zpsa88555ae.jpg


10.5" barrel with no hiccups or stoppages. Runs like a champ

JHoward
22 December 2014, 12:31
Nope. Are you set on a rail? I got a standard weight barrel and a MOE SL hand guard, mainly because I believe that with a carbine length fsb you will be a lot less likely to put enough pressure on the barrel, whether with a sling or on a barrier, to greatly reduce accuracy.

Ride4frnt
22 December 2014, 12:34
Nope. Are you set on a rail? I got a standard weight barrel and a MOE SL hand guard, mainly because I believe that with a carbine length fsb you will be a lot less likely to put enough pressure on the barrel, whether with a sling or on a barrier, to greatly reduce accuracy.

I'm not set on anything. I have a 12" rainier force sitting at home. Would be open to trades, but I'm not sure I want another moe hand guard. Have one on my 14.5" I may just end up with what was originally planned which was a 10.5" and a kx3. But then I can't suppress it. Not to say another upper isn't in my future.

I could always go the drop in 2 piece rail route. Midwest or something similar.

JHoward
22 December 2014, 12:36
I just hate to see another one of "those". No offense, but that's a trend I was never a fan of.

Dark1
22 December 2014, 15:52
Just got set up with theses two buries
8.5" 6.8spc 9" Nosky Keymod hand guard gun coat FDE
http://tapatalk.imageshack.com/v2/14/12/22/1b550c5ba20a1786231719f637b11e71.jpg

10" 5.56 YHM light drop in customizable carbine HG
http://tapatalk.imageshack.com/v2/14/12/22/26d1d3a0a2e7f41d54cf7b8c326ec37f.jpg

5pins
22 December 2014, 18:42
10.5 inch .300 BO.


https://lh6.googleusercontent.com/rgf_17T8iBoe_34TGQJhyIQ4DUcEMrGnUma-vLljUM8=w1043-h492

EliteEaston
27 December 2014, 18:18
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2452_zps149d442a.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2452_zps149d442a.jpg.html)

This one

JHoward
7 January 2015, 16:26
http://tapatalk.imageshack.com/v2/15/01/07/bc72eb8b26478a65b8dda36e823c58d4.jpg

Finally got the Thordsen on. This one is done as far as I'm concerned.

Computalotapus
7 January 2015, 16:30
Nice

JHoward
7 January 2015, 18:02
Thanks. Simple, effective. I'm loving it.

GOST
7 January 2015, 19:09
Looks good, how you liking the Thordsen?

JHoward
7 January 2015, 19:38
I love it. It works great with my shooting style, short arms, huge muscular chest muscles, and chubby cheeks. I only ever ran my stocks on the first position anyway, so this is pretty darn close.

0uTkAsT
8 January 2015, 18:22
I love it. It works great with my shooting style, short arms, huge muscular chest muscles, and chubby cheeks. I only ever ran my stocks on the first position anyway, so this is pretty darn close.

Sounds like we are very similarly built physically, big shoulders, barrel chested and shorter arms, which reinforces my thinking about switching from my Sig brace to your setup... The SB15 is ok but I hate that it rotates on my Guntec SB15 tube. No complaints otherwise, so maybe I'll just leave it and put it towards the Scorpion EVO build I have planned.

Pic thread:

https://scontent-a-dfw.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/r90/1606857_10152045686500904_7137491053262643377_n.jp g?oh=72a0735623644c895c4034ce52ff4223&oe=5525302B

UWone77
12 January 2015, 00:46
7.5" Rainier Select Barrel on a 7" Fortis REV. On my Maxpedition Man Purse

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2770_zps9c310463.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2770_zps9c310463.jpg.html)

DutyUse
12 January 2015, 01:13
7.5" Rainier Select Barrel on a 7" Fortis REV. On my Maxpedition Man Purse

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2770_zps9c310463.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2770_zps9c310463.jpg.html)

I love that the rail is so short it only allows for 3 keymod slots lol

These super short pistols look cool, but anything under 10" is pretty much just a range toy right? Not bashing just always wondered how reliable/effective they would be. Shoot it much?

mustangfreek
12 January 2015, 01:46
Nice!! I likes that little blaster...

0uTkAsT
12 January 2015, 19:29
Not bashing just always wondered how reliable/effective they would be. Shoot it much?

They can be made just as reliable as any other length AR, and are quite "effective"... My 7.5" pistol length gas AR has over 2,700 rounds through it, needed no tuning, runs with a standard weight or H2 buffer, and has had no failures that weren't from bad ammunition.

People who don't understand short ARs must not understand any PDWs, their purpose or application. Lots of people bash 7.5" ARs just like lots of people bash .380 pistols... Funny thing is, none of the naysayers have ever volunteered to let me shoot them with it, despite how "underpowered and ineffective" they are. [:D]

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10458321_10152025426285904_7170042953661651701_n.j pg?oh=56831dd25afc88b5f69752d644e2c5a4&oe=553A5A3C&__gda__=1429525593_56870a16c4d2ed7cd51c930e38b6ce7 4

Gaspipeshooter
12 January 2015, 20:32
Sounds like we are very similarly built physically, big shoulders, barrel chested and shorter arms, which reinforces my thinking about switching from my Sig brace to your setup... The SB15 is ok but I hate that it rotates on my Guntec SB15 tube. No complaints otherwise, so maybe I'll just leave it and put it towards the Scorpion EVO build I have planned.

Pic thread:

https://scontent-a-dfw.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/r90/1606857_10152045686500904_7137491053262643377_n.jp g?oh=72a0735623644c895c4034ce52ff4223&oe=5525302B

My Sig brace was DIFFICULT to get on the Phase 5 Hex tube. No twisting/rotating whatsoever.

DutyUse
12 January 2015, 22:31
They can be made just as reliable as any other length AR, and are quite "effective"... My 7.5" pistol length gas AR has over 2,700 rounds through it, needed no tuning, runs with a standard weight or H2 buffer, and has had no failures that weren't from bad ammunition.

People who don't understand short ARs must not understand any PDWs, their purpose or application. Lots of people bash 7.5" ARs just like lots of people bash .380 pistols... Funny thing is, none of the naysayers have ever volunteered to let me shoot them with it, despite how "underpowered and ineffective" they are. [:D]

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10458321_10152025426285904_7170042953661651701_n.j pg?oh=56831dd25afc88b5f69752d644e2c5a4&oe=553A5A3C&__gda__=1429525593_56870a16c4d2ed7cd51c930e38b6ce7 4

I have a 10.5 and 11.5 so don't think I'm hating. Just never had or shot one shorter then 10". The ones I've seen under that were finicky but that could have been component selection. You don't know unless you ask right? :D

UWone77
13 January 2015, 00:37
I love that the rail is so short it only allows for 3 keymod slots lol

These super short pistols look cool, but anything under 10" is pretty much just a range toy right? Not bashing just always wondered how reliable/effective they would be. Shoot it much?

This isn't actually my pistol, it's a buddy who wanted me to put the upper together. Ran about 300 rounds through it today without issue. I think he saw the value of the KVP Linear Comp, after he shot his AAC Brakeout out of his 10.5 SBR for the first time.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2772_zps4dc316a9.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2772_zps4dc316a9.jpg.html)

Gaspipeshooter
13 January 2015, 06:11
This isn't actually my pistol, it's a buddy who wanted me to put the upper together. Ran about 300 rounds through it today without issue. I think he saw the value of the KVP Linear Comp, after he shot his AAC Brakeout out of his 10.5 SBR for the first time.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2772_zps4dc316a9.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2772_zps4dc316a9.jpg.html)

That Phase 5 Hex tube is BEGGING for a Sig Brace...[BD]

toolboxluis00200
13 January 2015, 06:15
This isn't actually my pistol, it's a buddy who wanted me to put the upper together. Ran about 300 rounds through it today without issue. I think he saw the value of the KVP Linear Comp, after he shot his AAC Brakeout out of his 10.5 SBR for the first time.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2772_zps4dc316a9.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2772_zps4dc316a9.jpg.html)

wow that loosk nice i moye have to find one and try it out on my SBR

toolboxluis00200
13 January 2015, 06:16
any body make a MAN PURSE to fit and AR pistol ???

Computalotapus
13 January 2015, 06:18
any body make a MAN PURSE to fit and AR pistol ???


Yeah its called a sling bag :)

toolboxluis00200
13 January 2015, 06:33
lol

Computalotapus
13 January 2015, 06:41
lol

Grey Ghost Gear Coffin Bag (http://www.greyghostgear.com/product-p/6003.htm)

toolboxluis00200
13 January 2015, 07:15
Grey Ghost Gear Coffin Bag (http://www.greyghostgear.com/product-p/6003.htm)

thanks now we talking

Computalotapus
13 January 2015, 07:19
thanks now we talking

The design is so that it doesn't have to come off the body to get to it. When you slide the bag to cover your chest is lays horizontally making access into the bag from the side zipper. Sling bags make great off body carry bags for Pistols, AR-Pistols and broken down SBR rifles. Tho I do not suggest off body concealed carry of an SBR :p

voodoo_man
13 January 2015, 07:24
This is a thread I can get behind...

http://i.imgur.com/Hv5Q5bg.jpg

0uTkAsT
14 January 2015, 19:53
Nice Diablo

mustangfreek
22 January 2015, 02:04
MY RA pistol, still needs a stamp im thinkin....

http://i194.photobucket.com/albums/z176/mustang91_2007/2b8a20eb-e931-48de-ab4d-65256f721c9c_zpse010361c.jpg

toolboxluis00200
22 January 2015, 10:20
The design is so that it doesn't have to come off the body to get to it. When you slide the bag to cover your chest is lays horizontally making access into the bag from the side zipper. Sling bags make great off body carry bags for Pistols, AR-Pistols and broken down SBR rifles. Tho I do not suggest off body concealed carry of an SBR :p

that is why i am think of building a new pistol using a 7.5 barrel and using a bag just like that to carry an AR pistol

Cotton68spc
1 February 2015, 18:27
http://tapatalk.imageshack.com/v2/15/02/01/752d4d8cbd4740169d06236c8ab6873e.jpg
My .277 Wolverine Build


Sent from my iPhone using Tapatalk

toolboxluis00200
1 February 2015, 18:30
wow that is one killer set up

Dstrbdmedic167
1 February 2015, 18:40
http://tapatalk.imageshack.com/v2/15/02/01/752d4d8cbd4740169d06236c8ab6873e.jpg
My .277 Wolverine Build


Sent from my iPhone using Tapatalk

Nice!! And to think that is for the Mrs.!

Cotton68spc
2 February 2015, 03:57
wow that is one killer set up

Thanks


Sent from my iPhone using Tapatalk

Cotton68spc
2 February 2015, 03:57
Nice!! And to think that is for the Mrs.!

Thanks brother


Sent from my iPhone using Tapatalk

Txfilmmaker
2 February 2015, 05:33
Nice setup and nice photo.


Sent from my iPhone using Tapatalk

Cotton68spc
2 February 2015, 06:39
Nice setup and nice photo.


Sent from my iPhone using Tapatalk

Thanks learning to use some new camera gear


Sent from my iPhone using Tapatalk

Txfilmmaker
2 February 2015, 07:10
Nice. Just started using a 50mm f1.4 lens, myself. Like it a lot. Enjoy your gear. :)


Sent from my iPhone using Tapatalk

DutyUse
20 February 2015, 23:22
http://tapatalk.imageshack.com/v2/15/02/20/25933ab088c9540b2b3938118b06bbe0.jpg


Sent from my iPhone using Tapatalk

Bravotac1
11 April 2015, 06:09
The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for 7.62x51 configuration AR-15s. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul Grip Cores to adapt to various storage needs.

This update to the original MIAD has improved strap retention and also comes standard with the newest grip core; a lubrication bottle core.

http://www.bravotac.com/magpul-moe-ar15-pistol-grip-mag415-blk

UWone77
11 April 2015, 22:19
The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for 7.62x51 configuration AR-15s. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul Grip Cores to adapt to various storage needs.

This update to the original MIAD has improved strap retention and also comes standard with the newest grip core; a lubrication bottle core.

http://www.bravotac.com/magpul-moe-ar15-pistol-grip-mag415-blk

Uhh, ok...

If you're going to try to advertise here, you might want to at least provide a link to the product you've described. [BD]

GOST
11 April 2015, 22:34
And maybe put it in a tread that's slightly relevant.

quino171
17 July 2016, 12:53
My meager contribution.

http://uploads.tapatalk-cdn.com/20160717/433871988c37a72aac6bdeb29d6d94ba.jpg

Sent from my A0001 using Tapatalk

Jerry R
17 July 2016, 14:56
^^ Nice !

mustangfreek
14 November 2016, 03:12
Knocked the dust off this one and destroyed some pumpkins last weekend

mustangfreek
1 May 2017, 18:16
Changed a few things

http://i194.photobucket.com/albums/z176/mustang91_2007/gun%20crap/C55161CC-358B-48D2-959F-1DA146F1818A_zpsmxntcx2s.jpg (http://s194.photobucket.com/user/mustang91_2007/media/gun%20crap/C55161CC-358B-48D2-959F-1DA146F1818A_zpsmxntcx2s.jpg.html)

voodoo_man
2 May 2017, 12:37
http://i.imgur.com/YgNDqLW.png (http://www.vdmsr.com/2017/05/so-there-i-was.html)

Stickman
13 May 2017, 04:15
3338

Uffdaphil
7 October 2017, 14:42
Just finished today. Cheapo 9mm AR.
Used BCM upper with unkown 8”barrel and 1/28 thread ext.
9.25 Aero enhanced M-LOK , Griffin Rev9 “K” can
PSA lower and hybrid BCG, Q9 buffer w/EP Wolff spring

4359

The PSA uppers have no ejection port doors and the hybrid bolt carrier snags and won’t pop open this one. I can hammer it open with a light rubber mallet blow on the CH so I think a little Dremel ramping on inner door wil solve the issue.

EDIT: I popped in a polymer Strike Ind. dust cover and filed an incline where the bolt snagged. Problem solved

Former11B
8 October 2017, 10:50
4365

mustangfreek
10 October 2017, 03:11
9mm pistol/carbine is on my list...looks fun..

Not to fancy but eats everything with it..bunch of ra parts/aero....10.5 “ barrel.. needs a red dot and rail swap..I have a light just need a mount.. also thinking a lot lately about trying out a sb coll. Brace...

UWone77
8 November 2017, 08:19
4515

Stone
8 November 2017, 08:21
I still cant believe you bought that brace...:P

Former11B
8 November 2017, 09:20
I still cant believe you bought that brace...:P

I like those PDW braces

UWone77
8 November 2017, 09:29
I still cant believe you bought that brace...:P

Me neither... BUT... It's better than waiting a year at this point. I have a FDE one on order. I plan to use them on guns I eventually want to SBR.

As far as braces go, these are very nice. They've come along way from the Sig Brace.

Uffdaphil
8 November 2017, 14:48
My AR9 (post 104) is intolerably gassy with the K can so that is back on the Glock. Here is what she looks like now with the fat 4” Kaw XL linear comp. Looks decent to me. Bad last-light pic.

4517

UWone77
10 November 2017, 04:06
4522

Uffdaphil
10 November 2017, 04:40
I didn’t think I wanted a slider until that pic. Looks great.

titanse05
10 November 2017, 05:22
I didn’t think I wanted a slider until that pic. Looks great.Yeah I think UWone secretly owns stock in SB Tactical......lol

If I can find one at Black Friday prices I'm going to put one on my pistol.

UWone77
11 November 2017, 05:24
Yeah I think UWone secretly owns stock in SB Tactical......lol

If I can find one at Black Friday prices I'm going to put one on my pistol.

Heh. I usually hate braces. They suck, including other SB Tactical ones. However their PDW brace has enough material at the end where you could shoulder it. Seems like these push the edge of what a "pistol" is without a stock. I ordered a FDE one from Brownells that will ultimately stay on this particular gun. The black one I plan to rotate around guns I will SBR.

ShooterScott
22 November 2017, 12:16
http://tapatalk.imageshack.com/v2/14/09/15/93dd83e14e9bce37cf92abfc08972317.jpg

My "cheap" pistol build.
Started as a left over no name stripped upper
PSA lower I got cheap
PSA LPK I got on sale that I polished the trigger
Phase 5 buffer( I think)
Rainier Arms 10.5" match Barrel
Rainier Arms 12" Evo Rail
Rainier Arms low pro gas block and tube
Rainier Arms BCG
BCM mod 3 CH
Dragons Breath comp
Foliage Magpul Furniture and BUIS
Vortex Sparc

Really sick setup!

Battle Cock
23 November 2017, 17:36
Heh. I usually hate braces. They suck, including other SB Tactical ones. However their PDW brace has enough material at the end where you could shoulder it. Seems like these push the edge of what a "pistol" is without a stock. I ordered a FDE one from Brownells that will ultimately stay on this particular gun. The black one I plan to rotate around guns I will SBR.

The PDW braces are a VERY far cry from where pistol braces started. They finally converted me over to finding AR pistols practical.

Just put together this Aero M4E1 7.5. It’s getting blasted and coated so I grabbed a sharpie and drew all over just for the hell of it.

https://uploads.tapatalk-cdn.com/20171124/45f03b7dae575634ce178b7d7f0bff36.jpg

Former11B
7 December 2017, 09:25
4646

Uffdaphil
7 December 2017, 09:39
Looking good. What mount is that? I have a couple Comps that would benefit from that streamlined look.

FortTom
7 December 2017, 11:26
Heh. I usually hate braces. They suck, including other SB Tactical ones. However their PDW brace has enough material at the end where you could shoulder it. Seems like these push the edge of what a "pistol" is without a stock.......

We have a very "gun friendly" Sheriff, in a conservative state, but a couple of years ago, I was talking to some deputies at a local indoor range, who according to them, the Sheriff was getting just about sick of seeing people flaunting their Sig braces by shouldering them to "double" as an SBR. Usually goof balls who gathered around acting cool like they were smoking "secretly" in the bathroom at school, knowing all well that everyone knew what they were doing but making a spectacle out of themselves anyway. If you regularly deal with NFA stuff anyway, and don't or won't mind all that goes with it, why not just build a pistol in the first place? Going over the "off topic" cliff now, but sometimes I think we're our own worst enemies.

FT[:D]

UWone77
7 December 2017, 11:42
We have a very "gun friendly" Sheriff, in a conservative state, but a couple of years ago, I was talking to some deputies at a local indoor range, who according to them, the Sheriff was getting just about sick of seeing people flaunting their Sig braces by shouldering them to "double" as an SBR. Usually goof balls who gathered around acting cool like they were smoking "secretly" in the bathroom at school, knowing all well that everyone knew what they were doing but making a spectacle out of themselves anyway. If you regularly deal with NFA stuff anyway, and don't or won't mind all that goes with it, why not just build a pistol in the first place? Going over the "off topic" cliff now, but sometimes I think we're our own worst enemies.

FT[:D]

Well, I guess it's a good thing the Sheriff doesn't regulate NFA items.

Besides the ATF has already ruled that shouldering a brace does not change the classification. Shoulder away!

FortTom
7 December 2017, 13:02
No, he doesn't (regulate) NFA items, but he does have the power of arrest. He also gets a say on who gets a concealed carry permit. All of that, and given the ATF has ruled that way was not really the point, it's pushing the very boundaries of the law, to the point that it gets the attention of our friends, much less our enemies. (the "anti's).

FT[:D]

Battle Cock
7 December 2017, 13:08
No, he doesn't (regulate) NFA items, but he does have the power of arrest. He also gets a say on who gets a concealed carry permit. All of that, and given the ATF has ruled that way was not really the point, it's pushing the very boundaries of the law, to the point that it gets the attention of our friends, much less our enemies. (the "anti's).

FT[:D]

Pushing the boundaries of the law is kind of the point. In large part, pistol braces are making SBR laws obsolete. There isn’t much functional difference between shouldering many of the new braces and shouldering their stock counterparts but we still don’t have blood flowing in the streets because of it. (Or, whatever the original ban justification was.)

UWone77
7 December 2017, 13:59
If the Sheriff made an arrest on that, (not sure what the laws are in KY) but here, I'd just be wondering what new guns I'd be purchasing with the settlement. There is no specific law here that says you cannot shoulder a pistol. As obscure as this issue is in the general firearms arena, I'm sure no other state has a law specifically banning this.

We also live in a Shall Issue state, the only say the Sheriff here has for concealed permits is... Yes. [:D]

Former11B
7 December 2017, 16:10
No, he doesn't (regulate) NFA items, but he does have the power of arrest. He also gets a say on who gets a concealed carry permit. All of that, and given the ATF has ruled that way was not really the point, it's pushing the very boundaries of the law, to the point that it gets the attention of our friends, much less our enemies. (the "anti's).

FT[:D]

Having to tiptoe around an elected official like that is bogus. However, not all states are like that. Here in SC, our permits go to the State Law Enforcement Division.



Looking good. What mount is that? I have a couple Comps that would benefit from that streamlined look.

It’s actually the factory OEM mount it came with

Jerry R
7 December 2017, 16:35
http://www.weaponevolution.com/forum/attachment.php?attachmentid=4650&d=1512693302

Big_Tom
8 December 2017, 08:27
https://farm5.staticflickr.com/4560/27132305179_471a3ee95f_o.jpg (https://flic.kr/p/HkAa4a)SBRG4 (https://flic.kr/p/HkAa4a)
by Tango Charlie (https://www.flickr.com/photos/tangocharlie/), on Flickr

Battle Cock
16 December 2017, 15:39
Not bad for a mobile camera and edit.

https://uploads.tapatalk-cdn.com/20171216/4f791cc3b6289dfdc6ab44c3576346b2.jpg

Aragorn
16 December 2017, 16:44
Not bad for a mobile camera and edit.

https://uploads.tapatalk-cdn.com/20171216/4f791cc3b6289dfdc6ab44c3576346b2.jpg

Is that rawhide?

fledge
16 December 2017, 18:43
Explain the story behind the “kittycorn”.

Battle Cock
17 December 2017, 06:19
Is that rawhide?

It’s leather but it does look a bit like rawhide.

And there are a lot of different reasons for the rainbow unicorn kitty. I love guns, I love cats, and I try not to use my firearms as a reason to take myself seriously.

There’s also a general idea online that customizing your guns will get you convicted of... something, if you ever have a DGU with one, so I like to pose the question about how badly the rainbow unicorn kitty would hurt legal defense. It’s sort of the antithesis to the punisher logo.

Joelski
17 December 2017, 07:57
It’s leather but it does look a bit like rawhide.

And there are a lot of different reasons for the rainbow unicorn kitty. I love guns, I love cats, and I try not to use my firearms as a reason to take myself seriously.

There’s also a general idea online that customizing your guns will get you convicted of... something, if you ever have a DGU with one, so I like to pose the question about how badly the rainbow unicorn kitty would hurt legal defense. It’s sort of the antithesis to the punisher logo.

RT a recent topic elsewhere. The port door seems to be quite a source of righteousness, be it for the comment printed on it, the fact that it was a duty weapon, or whatever else. Personal items are fine, IMO, but something used in the course of one's work should have some restraint, again, IMO.

Thoughts?

Battle Cock
17 December 2017, 08:06
RT a recent topic elsewhere. The port door seems to be quite a source of righteousness, be it for the comment printed on it, the fact that it was a duty weapon, or whatever else. Personal items are fine, IMO, but something used in the course of one's work should have some restraint, again, IMO.

Thoughts?

Liability is virtually a non existent issue when it comes to thematic design choices on a firearm. The officer with the you’re effed inscription on his dust cover definitely made a dumbass decision to put inflammatory rhetoric on his duty weapon, but it was ruled legally inadmissible and he got a not guilty verdict. His consequences in that situation, even as bad and questionable as it was boiled down to personal and social consequences. Not legal ones.

You won’t see me putting racist or inflammatory remarks or imagery on my guns for the same reason you won’t see me wearing them on my chest. Those are poor social decisions independent of any firearms issue. Beyond that, there’s zero case law indicating that such adornment has ever changed the ruling of a good shoot to a bad shoot, which is the more important issue.

Joelski
17 December 2017, 10:09
Yep.


Liability is virtually a non existent issue when it comes to thematic design choices on a firearm. The officer with the you’re effed inscription on his dust cover definitely made a dumbass decision to put inflammatory rhetoric on his duty weapon, but it was ruled legally inadmissible and he got a not guilty verdict. His consequences in that situation, even as bad and questionable as it was boiled down to personal and social consequences. Not legal ones.

You won’t see me putting racist or inflammatory remarks or imagery on my guns for the same reason you won’t see me wearing them on my chest. Those are poor social decisions independent of any firearms issue. Beyond that, there’s zero case law indicating that such adornment has ever changed the ruling of a good shoot to a bad shoot, which is the more important issue.

mustangfreek
18 December 2017, 14:11
How do u like the brace BC?

Jerry R
22 December 2017, 15:26
http://www.weaponevolution.com/forum/attachment.php?attachmentid=4738&d=1513985133

Uffdaphil
18 July 2018, 21:06
I posted this one before with an SBR lower and Recce 7 can. Now it has an Omega 9K and SBA3. I like this brace so much I doubt I will ever get a fourth NFA lower.

Stupidity springs eternal in Uffdaland. Took this to the range today with the 12.5 (which is a slice of heaven) and it was single action only. Tried H2, 3, & 4 buffers with no joy. It functioned fine as an SBR. Hmm? Got home and realized I had just swapped the A5 buffer and rifle spring into the A3 carbine tube!

Much as I hate paying for the new Photobucket, I’m thankful it is geezer friendly.

http://i150.photobucket.com/albums/s92/uffdaphil/3832FE15-D5EE-4C68-B1A1-1F6FF18A72EE.jpeg (http://s150.photobucket.com/user/uffdaphil/media/3832FE15-D5EE-4C68-B1A1-1F6FF18A72EE.jpeg.html)

Slippers
19 July 2018, 03:27
I posted this one before with an SBR lower and Recce 7 can. Now it has an Omega 9K and SBA3. I like this brace so much I doubt I will ever get a fourth NFA lower.

Stupidity springs eternal in Uffdaland. Took this to the range today with the 12.5 (which is a slice of heaven) and it was single action only. Tried H2, 3, & 4 buffers with no joy. It functioned fine as an SBR. Hmm? Got home and realized I had just swapped the A5 buffer and rifle spring into the A3 carbine tube!

Much as I hate paying for the new Photobucket, I’m thankful it is geezer friendly.

http://i150.photobucket.com/albums/s92/uffdaphil/3832FE15-D5EE-4C68-B1A1-1F6FF18A72EE.jpeg (http://s150.photobucket.com/user/uffdaphil/media/3832FE15-D5EE-4C68-B1A1-1F6FF18A72EE.jpeg.html)

The sba3 is hilariously good. Still curious how the ATF let it by. Oh well! Nice blaster.

Uffdaphil
20 July 2018, 17:21
I decided I “needed” another PDW so finished off a Sionics lower to match their 11.5” upper and popped on an SBA3 to free up another SBR lower. I’m trying a JP captured buffer just for grins. And the 300 BLK has now got a proper carbine spring and heavy buffer.

I don’t normally push it, but like knowing I can tote these loaded in the truck if necessary. If they had names they would be Fireball, Rude, and Mr. Manners.

http://i150.photobucket.com/albums/s92/uffdaphil/4BDF3132-AF20-4A65-886C-F28D5134D1B8.jpeg (http://s150.photobucket.com/user/uffdaphil/media/4BDF3132-AF20-4A65-886C-F28D5134D1B8.jpeg.html)

P.S. I discovered that forcing off a well staked castle nut may gouge the nut, wrench and strip the tube threads. Drilling out most of the staked mass first with a 1/16” bit works well.

Former11B
20 July 2018, 20:46
I want to try a Geissele braided buffer spring. Most of mine have worn in (regular springs) but my Colt spring just sproings so badly even with tuned gas and when it’s spotlessly cleaned

Joelski
21 July 2018, 11:09
I had one that came with a BCM kit that noisy. I broke it back down, hosed the shit out of it with brake cleaner and then swabbed it with white lithium grease, and swabbed the inside of the tube with a mixture of moly based grease and aeroshell. It worked much better than thin film lubricants.

Jerry R
28 July 2018, 12:40
http://www.weaponevolution.com/forum/attachment.php?attachmentid=5615&d=1532806759

UWone77
2 August 2018, 04:03
5630

Former11B
2 August 2018, 05:24
5632

Helped MCA with this over the weekend

Jerry R
9 August 2018, 14:09
http://www.weaponevolution.com/forum/attachment.php?attachmentid=5702&d=1533848945

UWone77
9 August 2018, 16:29
Looks great Jerry... needs a Fortis or Lantac end plate for a 1 point though. [:D]

Jerry R
9 August 2018, 17:29
Thanks UW. I looked at both, availability (in black) was an issue, so I have a Strike Industries QD mount (for the M-Lok) on the way. I will use a 2 Point from the QD to the blade. I have a 1 point on the other pistol, and may convert later when "stuff" comes back in stock. Going to GriffonSec's next week to zero the irons and Romeo 5, and run it hard to be sure it works with ball, HD, and my lead reloads; magazines may be problematic as well - need to be sure everything works. Working on a detailed Product Review, that I will post later this month.

Jerry R
26 August 2018, 13:30
http://www.weaponevolution.com/forum/attachment.php?attachmentid=5769&d=1535315242

Jerry R
29 September 2018, 13:01
http://www.weaponevolution.com/forum/attachment.php?attachmentid=5883&d=1538251220

Joelski
29 September 2018, 14:54
The sba3 is hilariously good. Still curious how the ATF let it by. Oh well! Nice blaster.

Don't even wonder that out loud!

ChattanoogaPhil
29 September 2018, 16:01
Hey Jerry, awesome pics.

I'm curious about the Arisaka fingerstop (love mine), but does the ATF give that a pass as far as a vertical forward grip on a pistol?

Jerry R
30 September 2018, 08:01
does the ATF give that a pass as far as a vertical forward grip on a pistol?

Thank you Sir. Yes, BATFE does not consider it a vertical grip. I believe the MagPul Angled Foregrip gets a pass as well.

Joelski
30 September 2018, 08:05
Especially good to know!
Thank you Sir. Yes, BATFE does not consider it a vertical grip. I believe the MagPul Angled Foregrip gets a pass as well.

ChattanoogaPhil
30 September 2018, 11:34
Thank you Sir. Yes, BATFE does not consider it a vertical grip. I believe the MagPul Angled Foregrip gets a pass as well.

Thanks. One more reason pushing me closer to getting an AR pistol with the Shockwave blade.

mustangfreek
1 October 2018, 14:54
Thanks. One more reason pushing me closer to getting an AR pistol with the Shockwave blade.

I’ve got a mint kak blade and kak dimpled tube I’ll make ya a deal on.

ChattanoogaPhil
2 October 2018, 06:30
I think I'm going to use the Shockwave 2.0.

DISCOM
2 October 2018, 14:25
Fun Weekend build 12.5" 5.56

5890

Uffdaphil
2 October 2018, 14:38
Very nice Disco. Tasteful choice components adding up to a sleek package.

DISCOM
2 October 2018, 14:42
Very nice Disco. Tasteful choice components adding up to a sleek package.

Thank you sir.

SINNER
4 October 2018, 17:37
5895

UWone77
14 October 2018, 19:51
5906

UWone77
18 August 2019, 20:58
6795

UWone77
19 August 2019, 20:28
6798

UWone77
20 August 2019, 20:13
6801

BoilerUp
23 August 2019, 20:38
6801

Cool build!

UWone77
2 September 2019, 09:17
6839

UWone77
6 September 2019, 04:01
6857

UWone77
1 October 2019, 08:36
6913

UWone77
3 October 2019, 04:01
6916

UWone77
6 October 2019, 04:03
6926

Former11B
10 October 2019, 05:19
Threw together an SLR build for a friend in 300BLK

6941

6942

mustangfreek
11 October 2019, 01:10
I like it

UWone77
15 October 2019, 04:03
6955

fledge
15 October 2019, 07:11
Threw together an SLR build for a friend in 300BLK

6941

6942

Beautifully done. Is that painted or clear anodized?

UWone77
20 October 2019, 11:11
6958

UWone77
29 October 2019, 19:29
6983

Former11B
30 October 2019, 08:28
Beautifully done. Is that painted or clear anodized?

Clear hard coat anodizing

UWone77
1 March 2020, 00:37
7256

Former11B
1 April 2020, 08:22
https://i.imgur.com/Hrg2fCH.jpg

mustangfreek
24 April 2020, 19:25
Is this how you FDE?

Lol..just tighten it all up, just need some shims..as pws kit sux as they only have 3 sizes....couldn’t find any Gemtech kits..are the accuwasher kits worth it?

I’m also digging the green mro so far, looks better then the red dot version did, looks less tinted then the red was.well see..

fledge
24 April 2020, 19:28
Looking good, Mustang.

I prefer accuwashers over all others. But they are too spendy if you only use one.

gatordev
25 April 2020, 02:45
I think Big Tex has some Surefire shims, or did the last time I was there.

mustangfreek
25 April 2020, 03:55
Thanks guys!

Joelski
25 April 2020, 16:18
Looking good, Mustang.

I prefer accuwashers over all others. But they are too spendy if you only use one.

A pack of those is like a lifetime supply!

UWone77
25 April 2020, 19:58
I've got a bag full of hundreds of washers. If you need some, I can send you a pack.

BoilerUp
25 April 2020, 22:56
For reference, Griffin Armament's Shim Set is pretty handy and reasonably priced. A set is included with each MD so that's typically what I have laying around

https://www.griffinarmament.com/griffin-shim-set/

mustangfreek
26 April 2020, 03:24
I've got a bag full of hundreds of washers. If you need some, I can send you a pack.

The accuwashers?

Jerry R
23 May 2020, 11:57
http://www.weaponevolution.com/forum/attachment.php?attachmentid=7382&d=1590260204

apmcdaniel
14 August 2020, 19:25
https://uploads.tapatalk-cdn.com/20200815/67c40d068fea0d529813c4483dbc8631.jpg
BRN-180s URG
BRN-180 stripped lower receiver


Sent from my iPhone using Tapatalk

MoxyDave
16 August 2020, 12:49
Great photo man!

apmcdaniel
16 August 2020, 17:11
Great photo man!

Thanks. The AR pistol is mine - the photo is a model shot by Preston Monoc. He uses a lot of my Firearms in his photography, and I have ownership rights to any image with my items in it.


Sent from my iPhone using Tapatalk

SINNER
25 August 2020, 15:29
7506

7507

apmcdaniel
25 August 2020, 15:30
7506

7507

That's pretty damn cool. Nice! [emoji41][emoji106]


Sent from my iPhone using Tapatalk

mustangfreek
26 August 2020, 00:45
Battlekitty!!

Nice looking SBR...what barrel length?.

Are those can covers decent?

Big_Tom
28 August 2020, 15:45
12.5" Kino upperhttps://uploads.tapatalk-cdn.com/20200828/24f200037a56624fe0bd3410a80a0d50.jpg

Sent from my SM-G975U using Tapatalk

mustangfreek
29 August 2020, 14:33
Nice pistola BT !

What red dot?

Big_Tom
29 August 2020, 14:41
Nice pistola BT !

What red dot?Its a PA Micro

Sent from my SM-G975U using Tapatalk

SINNER
30 August 2020, 14:17
Battlekitty!!

Nice looking SBR...what barrel length?.

Are those can covers decent?

Missed this. 10.5” Noveske 6.8. And I’ve had good luck with everything I’ve used from Cole-Tac.

UWone77
27 September 2020, 19:16
7599