PDA

View Full Version : Manufacturer Spotlight - Fortis Manufacturing, Inc.



zero7one
23 August 2013, 02:35
http://fortismfg.com/image/data/fortismfg.png

Fortis Manufacturing, Inc

Strong, Powerful, Robust. That is the definition of the Latin word “Fortis” and what Fortis Manufacturing, Inc. strives to achieve in producing innovate and steadfast products. That sentiment is also included in their motto; “Strength by Design”.
Located in Washington State, Fortis Manufacturing, Inc. (FMI™) is aimed at providing a combination of “Operator” needed strength, exceptional design and aesthetics, while still offering their AR15/M16 product line at an affordable price. FMI™ ensures that all of their products undergo a strenuous T&E process by real-world professionals prior to the product being considered for full production. If the product has necessary design changes, further samples are redesigned, constructed, and sent back out for further testing. The philosophy of FMI™ is to “ensure each product will meet or exceed the heavy demands of the professionals who use them. FMI™ is proud that all of their manufactured parts are made in the United States of America, with the exception of their creative morale patches (http://fortismfg.com/index.php?route=product/category&path=20).

FMI™ offers a diverse accessory line for the AR15/M16 platforms that provide a practical and functional upgrade to a standard set-up.

The Fortis REV™ (http://fortismfg.com/index.php?route=product/category&path=59) series of Free Float Rail Systems, built out of aircraft grade 6061-T6 aluminum and finished with MIL-SPEC Type III hard coat anodization, surely stands out in the crowd. With its sleek appearance and aggressive appearance, the REV™ is as versatile as it is attractive. The REV™ is offered in varying lengths (7”, 9”, 12” and 14”) and features (Standard, 9” CAR Cutout and Mid-length FSP Cutout). For an after-market rail system, the REV™ is one of the lightest options available with the 7” version coming in at 6.7 ounces and the 14” version weighing 11 ounces. The one-piece body design offers strength and installation on an already installed barrel with standard barrel nut only requires the installation of four screws with an Allen wrench. Some of the key features of the REV™ include KeyMod attachment points at the 3 and 9 o’clock positions, a contiguous top rail, an inside diameter of 1.340”, rotation limited QD sockets, and anti-rotational tabs that fits most MIL-SPEC forged uppers, though some slight modification may be required for some uppers. Good news for gas piston system users, the REV™ is also piston compatible. The 14” REV™ is also available in Magpul FDE Cerakote for an additional cost. For the REV™ 9” CAR Cutout and MID FSP Cutout, if used with a FSP with bayonet lug, the lug will touch the bottom of the internal side of the rail.

http://farm9.staticflickr.com/8194/8433891873_2f41620004_b.jpg

http://farm3.staticflickr.com/2805/9501209692_069a7de0bc_b.jpg
14" REV™ Rail

http://farm9.staticflickr.com/8543/8672083975_e7f8061006_b.jpg
12" REV™ Rail


The Fortis RAP™ (http://fortismfg.com/index.php?route=product/category&path=18) (Rail Attachment Point), made out of 6061 aluminum and hard coat anodized to a deep black finish, is a great solution for the needed attachment of a QD swivel to any MIL-STD-1913 Picatinny Rail, while offering an compact footprint that is barely noticeable. The RAP™ QD socket is rotation limited and is offered either with or without a QD sling swivel.

http://farm9.staticflickr.com/8052/8139135623_522bced7db_b.jpg

http://farm9.staticflickr.com/8337/8230476719_a21d7d406b_b.jpg


The Fortis MPSA™ (http://fortismfg.com/index.php?route=product/category&path=25) (Multi-Point Sling Adapter) End Plate, built out of 6061 Aluminum and anodized in MIL-SPEC black, features both a quick detach socket and 1.25” loop sling attachment points. It was designed to be used with carbine style buffer tubes for both the AR15 and .308 platforms and is offered in right hand, left hand, and ambidextrous models. The machined edges of the MPSA™ have been fully radiused, inside and out, to prevent hot spots and fraying of the attached sling. If you are looking for an end plate solution with a quick detach option only, FMI™ has you covered with the Fortis QD End Plate, which offers the same features of the MPSA™ minus the loop sling attachment point.

http://farm8.staticflickr.com/7098/7288110698_84a7df89d2_b.jpg
Fortis MPSA™ - Right Handed Version

http://farm9.staticflickr.com/8349/8188187397_59a361a4a4_b.jpg
Fortis MPSA™ - Ambidextrous Version


Looking to add a Low Profile Gas Block (http://fortismfg.com/index.php?route=product/category&path=62)? FMI™ has that too, which is made out of 4140 steel. The Fortis gas block was designed with today’s match-grade barrels in mind and was built to fit .750 gas seats and attaches to the barrel with two set screws. The gas block comes included with a roll pin for attachment of the gas tube. If you prefer to have your gas block pinned in place, Fortis has options for pinned and not.

https://www.rainierarms.com/img/shop/product/16656fa70740423e064dc90a4c7bd9a5.jpg
Rainier Arms Photo


When you hear the term “F1” you may think of a fast, high-end, sleek race car. FMI™ has brought the term into the firearms industry with the Fortis F1™ Optics Mount (http://fortismfg.com/index.php?route=product/category&path=60). Instead of fiberglass, the F1™ is built out of one piece billet aircraft grade 6061-T6 aluminum and finished with MIL-SPEC Type III hard coat anodization. Originally designed as an after-market option for the popular Aimpoint Micro H-1 and T-1 red dot sights, it is also an excellent option for the Vortex Optics SPARC. Attaching to any MIL-STD-1913 Picatinny Rail with two slotted machine screws, the F1™ is most likely the lightest option available, weighing in at a mere 1.1 ounces. The sleek angled appearance matches up nicely with the REV™ series of rails. As for the co-witness with the Back-Up Iron Sights, the F1™ provides a lower 1/3 co-witness for a larger field of view.

http://farm9.staticflickr.com/8226/8599786903_a46ddc8b6f_b.jpg

http://farm9.staticflickr.com/8264/8673163012_ef39dc4dd1_b.jpg


The two latest products that Fortis has brought to market are the Fortis RED™ (Rapid Engagement Device) Muzzle Brake and the Fortis Forged MIL-SPEC Stripped Upper Receiver.

The Fortis RED™ (http://fortismfg.com/index.php?route=product/category&path=63), which is built out of 303 Stainless Steel for a 1/2x28 thread per inch (TPI), 5.56mm barrel, is 2.194 inches long and comes with an included crush washer. The RED™ was tested and evaluated by the LE/MIL community, then put to the test by the 3 gun community. Tested under fully automatic conditions, the RED™ has had favorable reviews.

http://farm6.staticflickr.com/5472/9501183444_4602bf24d4_b.jpg

http://farm6.staticflickr.com/5494/9501177264_d7e137cfd7_b.jpg


The Fortis Forged MIL-SPEC Stripped Upper Receiver (https://www.rainierarms.com/?page=shop/detail&product_id=3877) is machined from 7075-T6 aluminum and is built to MIL-SPEC standards. The Fortis Upper features M4 feed ramps, MIL-STD-1913 Picatinny rail flat top, engraved “T” numbers, is finished in MIL-SPEC Type III hard coat anodization, and has a dry lube coating to reduce wear and added lubricity. The upper does not come with a dust cover and forward assist assembly.

http://farm6.staticflickr.com/5465/9498435103_9b06076f9f_b.jpg

http://farm6.staticflickr.com/5503/9498431445_782abdeeaa_b.jpg


For more information, find Fortis Manufacturing, Inc. on the internet at: http://www.fortismfg.com.