UWone77
23 August 2013, 16:27
The anticipated Surefire DSF-Series Shotgun Forends (http://www.surefire.com/product/dsf.html?utm_source=broadcast&utm_medium=email&utm_campaign=DSF-Forends_consumer-email_body_2013-08-01) are finally shipping. These forends are now available for the Remington 870, Mossberg 500/590 Series, Benelli M1/M2, and Winchester 1200 Defender, 1300 Defender, FN F-12 & SPX
Description:
This compact, lightweight system replaces the weapon’s original factory forend and features a recoil-proof LED that generates 600 lumens of blinding white light at maximum output, or 200 lumens with twice the runtime on its high setting. The LED’s light is focused by a precision reflector to create a smooth, wide beam perfect for closer-range shotgun applications typical in law enforcement and home defense—with enough reach and surround light to properly identify threats and maintain situational awareness.
The DSF-Series features large, tactile momentary and constant-on switches on both sides for precise control by left- and right-handed shooters. Selecting the LED’s output is achieved by activating the light in constant-on mode and then pressing the output-mode selector switch until the desired output level (600 or 200 lumens) is set. The selected output can then be left in constant-on mode or switched to momentary activation, and it stays at that output level until reset. Every DSF-Series WeaponLight also features an integrated system-disable switch to prevent accidental activation during transport, storage, or stealth operations.
A lightweight but strong aluminum module protects the optics, LED, and sophisticated electronics, minimizing length with side-by-side placement of the two lithium batteries that power the system. The module has a Mil-Spec hard anodized finish to protect against scratches, abrasion, and corrosion, while O-ring and gasket seals keep out moisture, dust, and debris. The slender forend body is made from extremely tough polymer and is textured for a secure hold and features large, tactile momentary and constant-on switching on both sides for precise control by left- and right-handed shooters.
The DSF-Series provides unmatched power, versatility, and control, making it a must-have on shotguns used in combat, law enforcement, or home defense.
Output / Runtime -- White Light
High 600 lumens / 1.5 hours*
Low 200 lumens / 3.0 hours*
Tactical Runtime* 3 .0 hours
Bezel Diameter 1 .37 inches
Weight w/Batteries 17 .8 ounces
Batteries 2 123A (included)
Features:
Virtually indestructible, two-output LED generates 600 lumens of blinding light on its max setting, and 200 lumens with nearly twice the runtime on high
Precision reflector shapes a versatile beam with ample reach and surround light for close- to medium-range applications
Switching—ambidextrous momentary- and constant-on switches on both sides, output-mode-selector switch on left side, system-disable switch on forend bottom
Slender, lightweight, high-impact polymer forend is textured for secure grip
Construction—Mil-Spec hard-anodized aluminum body; coated, tempted window; O-ring & gasket seals for weatherproofing
Includes high-energy 123A batteries with 10-year shelf life
Backed by SureFire’s No-Hassle Promise
http://i1016.photobucket.com/albums/af282/richdkim77/surefire_zps30333ae0.jpg (http://s1016.photobucket.com/user/richdkim77/media/surefire_zps30333ae0.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/surefire2_zps9a0a589b.jpg (http://s1016.photobucket.com/user/richdkim77/media/surefire2_zps9a0a589b.jpg.html)
Description:
This compact, lightweight system replaces the weapon’s original factory forend and features a recoil-proof LED that generates 600 lumens of blinding white light at maximum output, or 200 lumens with twice the runtime on its high setting. The LED’s light is focused by a precision reflector to create a smooth, wide beam perfect for closer-range shotgun applications typical in law enforcement and home defense—with enough reach and surround light to properly identify threats and maintain situational awareness.
The DSF-Series features large, tactile momentary and constant-on switches on both sides for precise control by left- and right-handed shooters. Selecting the LED’s output is achieved by activating the light in constant-on mode and then pressing the output-mode selector switch until the desired output level (600 or 200 lumens) is set. The selected output can then be left in constant-on mode or switched to momentary activation, and it stays at that output level until reset. Every DSF-Series WeaponLight also features an integrated system-disable switch to prevent accidental activation during transport, storage, or stealth operations.
A lightweight but strong aluminum module protects the optics, LED, and sophisticated electronics, minimizing length with side-by-side placement of the two lithium batteries that power the system. The module has a Mil-Spec hard anodized finish to protect against scratches, abrasion, and corrosion, while O-ring and gasket seals keep out moisture, dust, and debris. The slender forend body is made from extremely tough polymer and is textured for a secure hold and features large, tactile momentary and constant-on switching on both sides for precise control by left- and right-handed shooters.
The DSF-Series provides unmatched power, versatility, and control, making it a must-have on shotguns used in combat, law enforcement, or home defense.
Output / Runtime -- White Light
High 600 lumens / 1.5 hours*
Low 200 lumens / 3.0 hours*
Tactical Runtime* 3 .0 hours
Bezel Diameter 1 .37 inches
Weight w/Batteries 17 .8 ounces
Batteries 2 123A (included)
Features:
Virtually indestructible, two-output LED generates 600 lumens of blinding light on its max setting, and 200 lumens with nearly twice the runtime on high
Precision reflector shapes a versatile beam with ample reach and surround light for close- to medium-range applications
Switching—ambidextrous momentary- and constant-on switches on both sides, output-mode-selector switch on left side, system-disable switch on forend bottom
Slender, lightweight, high-impact polymer forend is textured for secure grip
Construction—Mil-Spec hard-anodized aluminum body; coated, tempted window; O-ring & gasket seals for weatherproofing
Includes high-energy 123A batteries with 10-year shelf life
Backed by SureFire’s No-Hassle Promise
http://i1016.photobucket.com/albums/af282/richdkim77/surefire_zps30333ae0.jpg (http://s1016.photobucket.com/user/richdkim77/media/surefire_zps30333ae0.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/surefire2_zps9a0a589b.jpg (http://s1016.photobucket.com/user/richdkim77/media/surefire2_zps9a0a589b.jpg.html)