Noveske QD Flush Mount

[UWone77]

Noveske (http://www.noveske.com) has a new QD Flush mount (http://noveskerifleworks.com/cgi-bin/imcart/display.cgi?item_id=fm-qd&cat=178) available for those of you that like to use standard M4 stocks and Magpul MOE hanguards. Some drilling is required, so for those that are DIY challenged this may or may not be the product for you. After being able to see some sneak peaks at future Noveske products, we're all in for a treat. You can purchase or checkout the new QD Flush Mount HERE (http://noveskerifleworks.com/cgi-bin/imcart/display.cgi?item_id=fm-qd&cat=178).


Description:

Flush QD Mount for plastic stocks or handguards.
◾Steel QD mount and nut
◾Low-Profile
◾4 Position, rotation limited
◾Can be mounted in most hollow plastic stocks
◾Uses standard QD Swivel (Not included)
◾Weight: 0.3oz


The Flush QD Mount can be installed in most plastic stocks that are hollow and handguards that have a relatively flat section. Installation requirements

◾A 1/2" hole must be drilled
◾Material thickness of less than 1/4"
◾5/8" wrench
◾QD Swivel
◾Permanent thread locker is recommended


http://i1016.photobucket.com/albums/af282/richdkim77/b5f125b8fcd4bb4e57b0486162700575_zps8765e78f.jpg (http://s1016.photobucket.com/user/richdkim77/media/b5f125b8fcd4bb4e57b0486162700575_zps8765e78f.jpg.h tml)
http://i1016.photobucket.com/albums/af282/richdkim77/e712e148ccfe632053201068f660266d_zpsaa940aaf.jpg (http://s1016.photobucket.com/user/richdkim77/media/e712e148ccfe632053201068f660266d_zpsaa940aaf.jpg.h tml)
http://i1016.photobucket.com/albums/af282/richdkim77/f4a5dbb0e6686dc96009104cff7ae0fc_zps2b94bddd.jpg (http://s1016.photobucket.com/user/richdkim77/media/f4a5dbb0e6686dc96009104cff7ae0fc_zps2b94bddd.jpg.h tml)

[Hmac]

That's been around for awhile hasn't it? I bought a couple of those from Noveske in January of 2012 and installed one in a Hogue overmolded stock on my 10-22. The second one I'm going to now put in the Urbino stock on my Benelli M2. Parenthetically, I'd note that the thing that stimulated me to put the socket in the Urbino at this point is my accidental discovery the other day of another new Noveske product, a companion QD socket mount for the other end of the sling that will attach it to a Nordic shotgun barrel/magazine clamp. All my good slings are VTACs with sewn-in QD swivels, so Noveske has rather elegantly solved that little problem for me. I can attach one of my good old VTACs with QD to my Benelli for the occasions when I need to sling my shotgun.

http://media.midwayusa.com/productimages/880x660/primary/158/158353.jpg

[JohnnyRambo]

Would love to see if this can be used on a Magpul PRS if anyone is feeling crafty and has some free time.