jeffy
6 August 2008, 13:57
This has been a long time coming...
This all started last year, around this time with just a stripped lower. Now, a year later and there are only a few more pieces to the puzzle. Some last minute items were the Vltor Offset Scout Mount and the American Defense Mfg. B3 mount for the ACOG. I still need to get the rest of my Magpul XTM order in also. Currently, I only have the FDE and the Black panels (so that's why it's more of a checker board pattern. I've been waiting for the Forrest and OD green panels for over a month now.) Then I need to get the Hardigg Storm case to round it all out.
Second thought...
I've thought about replacing the YHM 5C1 for a Surefire MB556AR but I'd have to drill out the pin which wouldn't be that difficult. I'm not sure if it's worth it though. The other thing is, if I do that I might have to consider having the upper converted over to a piston set-up. But then, I still like the FSB and if I ended up with a gas block, I'd have to reconsider the rail. I still migth replace the CTR with a FDE UBR when they become available as well...
http://i4.photobucket.com/albums/y118/yokomura/LMT/DSC_0035-7.jpg
http://i4.photobucket.com/albums/y118/yokomura/LMT/DSC_0049-21.jpg
http://i4.photobucket.com/albums/y118/yokomura/LMT/DSC_0052-24.jpg
http://i4.photobucket.com/albums/y118/yokomura/LMT/DSC_0048-20.jpg
CMMG Lower Receiver
RRA LPK
RRA 2-stage NM Trigger set
KNS Gen II anti-rotation pins
14.5" LMT upper w/ pinned YHM 5C1
LMT FA BCG
Daniel Defense Omega 7.0
Magpul XTM Rail Panels
Magpul CTR Stock Mil-spec w/ H Buffer
Magpul MIAD
Magpul P Mag
Tango Down Vert. Grip
Troy FDE Flip-Up BUIS
PRI Big D Latch
American Defense Mfg AD-B3 Mount
Trijicon TA31F
Vltor Offset Scout Mount
Surefire G2 LED
Gear Sector GS-2P Carbine w/ QD Push-Button Adapters
This all started last year, around this time with just a stripped lower. Now, a year later and there are only a few more pieces to the puzzle. Some last minute items were the Vltor Offset Scout Mount and the American Defense Mfg. B3 mount for the ACOG. I still need to get the rest of my Magpul XTM order in also. Currently, I only have the FDE and the Black panels (so that's why it's more of a checker board pattern. I've been waiting for the Forrest and OD green panels for over a month now.) Then I need to get the Hardigg Storm case to round it all out.
Second thought...
I've thought about replacing the YHM 5C1 for a Surefire MB556AR but I'd have to drill out the pin which wouldn't be that difficult. I'm not sure if it's worth it though. The other thing is, if I do that I might have to consider having the upper converted over to a piston set-up. But then, I still like the FSB and if I ended up with a gas block, I'd have to reconsider the rail. I still migth replace the CTR with a FDE UBR when they become available as well...
http://i4.photobucket.com/albums/y118/yokomura/LMT/DSC_0035-7.jpg
http://i4.photobucket.com/albums/y118/yokomura/LMT/DSC_0049-21.jpg
http://i4.photobucket.com/albums/y118/yokomura/LMT/DSC_0052-24.jpg
http://i4.photobucket.com/albums/y118/yokomura/LMT/DSC_0048-20.jpg
CMMG Lower Receiver
RRA LPK
RRA 2-stage NM Trigger set
KNS Gen II anti-rotation pins
14.5" LMT upper w/ pinned YHM 5C1
LMT FA BCG
Daniel Defense Omega 7.0
Magpul XTM Rail Panels
Magpul CTR Stock Mil-spec w/ H Buffer
Magpul MIAD
Magpul P Mag
Tango Down Vert. Grip
Troy FDE Flip-Up BUIS
PRI Big D Latch
American Defense Mfg AD-B3 Mount
Trijicon TA31F
Vltor Offset Scout Mount
Surefire G2 LED
Gear Sector GS-2P Carbine w/ QD Push-Button Adapters