UWone77
19 February 2014, 11:15
Bravo Company USA (http://www.bravocompanyusa.com/BCM-Upper-Receiver-assembly-M4-Flat-Top-p/bcm4-ur-m4.htm) has been using their new M4 Upper receivers on their new factory rifles and uppers, but have just recently made them available as a stripped upper. I suppose I really can't call them stripped, as they come assembled, complete with forward assist and trap door assemblies. Word has it that BCM was rejecting a large number of uppers that came from OEM manufacturers, so BCM decided to manufacture their own uppers to get the specs they wanted. The stripped uppers will not be marked on the side, but factory uppers and complete rifles will continue to have the white markings. These should be available at your favorite BCM dealer or check Bravo Company USA's (http://www.bravocompanyusa.com/BCM-Upper-Receiver-assembly-M4-Flat-Top-p/bcm4-ur-m4.htm) site for more information.
Description:
Build to the correct Mil-Specs. (Inside Diameter for barrel extension slightly undersized for a tighter fit to the barrel and a more accurate rifle.)
Features:
-Precision machined to correct Mil-Specs from 7075 T6 Forgings
-Fully Assembled with forward assist, and ejection port cover
-Mil-Std 1913 Rail for mounting optics and accessories
-Machined for use with barrels that use an M4 barrel extension
-Laser etched T-markings for addressing the remounting of optics
-Includes Mil-Spec Forward Assist with heat treated tool steel pawl, with press fit and pinned cap
-Hard Coat Anodized per Mil-A-8625F, Type III, Class2
-Dry Film Lube on interior bore per Mil-Specs
Made in the U.S.A.
This product will not include the BCM logo etched on the receiver. It is marked “BCM4” over the gas tube hole.
MSRP $119
http://i849.photobucket.com/albums/ab55/UWone77/0bc45369295d73a6caa6193df9f814fe_zpsc549901e.jpg (http://s849.photobucket.com/user/UWone77/media/0bc45369295d73a6caa6193df9f814fe_zpsc549901e.jpg.h tml)
http://i849.photobucket.com/albums/ab55/UWone77/1626151a9bf226c69541d215313b88b9_zps55f18817.jpg (http://s849.photobucket.com/user/UWone77/media/1626151a9bf226c69541d215313b88b9_zps55f18817.jpg.h tml)
Description:
Build to the correct Mil-Specs. (Inside Diameter for barrel extension slightly undersized for a tighter fit to the barrel and a more accurate rifle.)
Features:
-Precision machined to correct Mil-Specs from 7075 T6 Forgings
-Fully Assembled with forward assist, and ejection port cover
-Mil-Std 1913 Rail for mounting optics and accessories
-Machined for use with barrels that use an M4 barrel extension
-Laser etched T-markings for addressing the remounting of optics
-Includes Mil-Spec Forward Assist with heat treated tool steel pawl, with press fit and pinned cap
-Hard Coat Anodized per Mil-A-8625F, Type III, Class2
-Dry Film Lube on interior bore per Mil-Specs
Made in the U.S.A.
This product will not include the BCM logo etched on the receiver. It is marked “BCM4” over the gas tube hole.
MSRP $119
http://i849.photobucket.com/albums/ab55/UWone77/0bc45369295d73a6caa6193df9f814fe_zpsc549901e.jpg (http://s849.photobucket.com/user/UWone77/media/0bc45369295d73a6caa6193df9f814fe_zpsc549901e.jpg.h tml)
http://i849.photobucket.com/albums/ab55/UWone77/1626151a9bf226c69541d215313b88b9_zps55f18817.jpg (http://s849.photobucket.com/user/UWone77/media/1626151a9bf226c69541d215313b88b9_zps55f18817.jpg.h tml)