CORE15 TAC III Sniper Grey

[UWone77]

CORE15 (http://core15rifles.com/core15-tac-iii-rifle-clone-en-6.html) Rifles is offering their TAC III Rifles in Sniper Grey. Not sure if this will be offered in other colors or if the color is a limited edition. Checkout CORE15's (http://core15rifles.com/core15-tac-iii-rifle-clone-en-6.html) rifles and other offerings on their website here. (http://core15rifles.com/core15-tac-iii-rifle-clone-en-6.html)


Specifications:


•CORE15™ Mil-Spec Forged 7075-T6 Lower Receiver, Cerakote Sniper Grey finish, beveled Magwell for improved reloading speed, machined chevrons in front strap, bullet pictogram safety markings

•CORE15™ Mil-Spec Forged 7075-T6 M-4 Upper Receiver, Cerakote Sniper Grey finish, M4 Feed Ramps, (1913 Picatinny rail flat top) w/ dry lube internal finish and laser engraved T-markings

•Chambered in .223/5.56 x 45 mm NATO
•16” 4150 CMV Chrome Moly Mid-length Profile Chrome Lined Barrel 1:7
•Midwest Industries Gen 2 SS Series 15" Free Float Forearm, Cerakote Sniper Grey Finish
•Chrome Lined 8620 Steel Bolt Carrier and Bolt Carrier Key
•Magnetic Particle Inspected (MPI) Carpenter 158® Bolt Assembly
•Low profile gas block
•Gas Tube made of 304 grade Stainless Steel
•A-2 Flash Hider
•Magpul® MOE® Six Position Stock
•Magpul® MOE® Pistol Grip
•Magpul® 30 rd. PMAG®
•CORE15™ Hardcore Billet V.2 Charging Handle
•CORE15™ Oversized Trigger Guard
•CORE15™ Owner’s Manual
•Weight (unloaded): 6.5 lbs.
•CORE15™ NO BS Lifetime Warranty


MSRP: $1499


http://i849.photobucket.com/albums/ab55/UWone77/61412_zps8b6fdba9.jpg (http://s849.photobucket.com/user/UWone77/media/61412_zps8b6fdba9.jpg.html)

[FortTom]

Wow, for the price, and especially if they had thrown on a CTR stock, with the Cerakote, I'd say that'd would make someone a fine weapon, off-the-shelf, at a reasonable "street" price. If one threw on some decent optics, they'd have a winner.
As an aside, I have a CORE 15 Lower with a BCM 16" Lightweight upper with Centurion rails. It came with a parts kit, unmarked, so I assumed it was from CORE, or whoever supplied their LPK's. When I got around to installing the trigger, I was dumbfounded. Single stage, almost zero take up and over travel, no creep, with approx. 4.5 break, according to my Lyman gauge. FCG wasn't marked as far as I remember, I just installed it as a "place holder" until I could order a "decent" trigger for it. I'll be damned if that "stock" trigger wasn't so nice that I said the heck with it and left it in. Fit between BCM upper and CORE lower was excellent, if not a bit too far on the tight side, which will lossen up a bit when I can get a chance to put some serious rounds through it.

My experience? CORE 15 makes good stuff. If their uppers are as good, this one looks like a winner.[:D]

FT

[GOST]

Looks more like tungsten than sniper grey.

[agr1279]

I have seen this and held it. Pictures do not do it justice. Look for more new and outstanding weapons from Core Rifle Systems.


Sent from my iPhone using Tapatalk

[UWone77]

I have seen this and held it. Pictures do not do it justice. Look for more new and outstanding weapons from Core Rifle Systems.


Sent from my iPhone using Tapatalk

Yeah that is a pretty subpar picture they used. Tell them to get a better photographer :)