PDA

View Full Version : Just finished my Northtech Defense build.



blowndeadline
9 March 2014, 15:40
Took a little while due to waiting on parts and the actually cerakote process which I did myself. I also created the Kryptek stencils and die cut them so if anyone is looking for stencils let me know! It's not for everyone!

Here's the parts list:
Upper:
Northtech Defense Billet Receiver
Northtect Ti-Fang Titanium Forward Assist
Seekins 15" SP3R Mod Rail
JuggerBrake Muzzle
CIV Tactical 16" barrel
YHM Gas Block
Seekins Gas Tube
Vertex Ops Smooth aluminum Ejection Port Door
WMD NiB BCG
Rainier Arms "Raptor" Charging Handle
Fortis SHIFT Forward Grip with Strike Industries 9 Slot Keymod Rail Attachment

Lower:
Northtech Defense Billet Lower
Umbrella Corp Grip
Spikes Tactical Buffer Tube
Spikes Tactical T2 Buffer and Spring
BAD Safety Levers
BAD Enhanced Take Down Pins
KNS ST Anti-Walk Pins
ALG Defense Combat Trigger
Seekins Billet Mag Button
Magpul ACS Stock
Phase 5 Tactical Ambi Bolt Release

I did all the Cerakote, stencils as well as the complete build. It's definitely not for everyone but I wanted to do something different as far as a color scheme. I used a 50/50 mix ratio of Tungsten Grey and Armor Black. Base is Armor Black, Crimson Red accents and the "Dark Tungsten" final coat.
Alot of blood, sweat and tears as well as cash went into this build and I am certainly proud of it!
Comments, good or bad are always welcome !

http://s26.postimg.org/ioe3fnet5/DSC02781.jpg (http://postimage.org/)

http://s26.postimg.org/ilu7stb5l/DSC02782.jpg (http://postimage.org/)

http://s26.postimg.org/a2atv22t5/DSC02783.jpg (http://postimage.org/)

http://s26.postimg.org/y4rnpxjg9/DSC02784.jpg (http://postimage.org/)

http://s26.postimg.org/43x0ktjuh/DSC02786.jpg (http://postimage.org/)

http://s26.postimg.org/5o2cj7s8p/DSC02788.jpg (http://postimage.org/)

http://s26.postimg.org/4fjiup6m1/DSC02790.jpg (http://postimage.org/)

http://s26.postimg.org/oukljif21/DSC02791.jpg (http://postimage.org/)

http://s26.postimg.org/3yyb89iux/DSC02793.jpg (http://postimage.org/)

http://s26.postimg.org/g5xgc2zeh/DSC02796.jpg (http://postimage.org/)

http://s26.postimg.org/ll66d1qyh/DSC02798.jpg (http://postimage.org/)

http://s26.postimg.org/gy04ba3ll/DSC02799.jpg (http://postimage.org/)

http://s26.postimg.org/c212xbsu1/DSC02804.jpg (http://postimage.org/)

http://s26.postimg.org/5ki6dtigp/DSC02805.jpg (http://postimage.org/)

http://s26.postimg.org/z9vd661mh/DSC02808.jpg (http://postimage.org/)

Computalotapus
9 March 2014, 15:57
As I mentioned on IG this rifle turned out really nice. I have been back and forth on a kryptek cerakote job but I am not artistic enough to do it myself. I keep flirting with maybe a black, blue titanium combo but the idea of waiting on them to get back from some place would be an awful feeling to have for that long lol.

blowndeadline
9 March 2014, 16:00
I am currently starting a custom build for a guy. Armor Black, Blue Titanium and Tungsten!

Computalotapus
9 March 2014, 16:16
I am currently starting a custom build for a guy. Armor Black, Blue Titanium and Tungsten!

did you delete the main post?

blowndeadline
9 March 2014, 16:20
Hahaha, maybe, I don't remember deleting the main post!

Took a little while due to waiting on parts and the actually cerakote process which I did myself. I also created the Kryptek stencils and die cut them so if anyone is looking for stencils let me know!

Here's the parts list:
Upper:
Northtech Defense Billet Receiver
Northtect Ti-Fang Titanium Forward Assist
Seekins 15" SP3R Mod Rail
JuggerBrake Muzzle
CIV Tactical 16" barrel
YHM Gas Block
Seekins Gas Tube
Vertex Ops Smooth aluminum Ejection Port Door
WMD NiB BCG
Rainier Arms "Raptor" Charging Handle
Fortis SHIFT Forward Grip with Strike Industries 9 Slot Keymod Rail Attachment

Lower:
Northtech Defense Billet Lower
Umbrella Corp Grip
Spikes Tactical Buffer Tube
Spikes Tactical T2 Buffer and Spring
BAD Safety Levers
BAD Enhanced Take Down Pins
KNS ST Anti-Walk Pins
ALG Defense Combat Trigger
Seekins Billet Mag Button
Magpul ACS Stock
Phase 5 Tactical Ambi Bolt Release

I did all the Cerakote, stencils as well as the complete build. It's definitely not for everyone but I wanted to do something different as far as a color scheme. I used a 50/50 mix ratio of Tungsten Grey and Armor Black. Base is Armor Black, Crimson Red accents and the "Dark Tungsten" final coat.
Alot of blood, sweat and tears as well as cash went into this build and I am certainly proud of it!
Comments, good or bad are always welcome !

UWone77
9 March 2014, 17:41
What happened was, I had to approve the post since the OP was a new member with no previous posts. After I approved it, he edited the post, so I had to approve it again, but by that time you guys had commented in the thread, so it looked like it had disappeared.

I took out the photos in the last response from the OP to clean up the thread a little. Hope you don't mind.

Thanks.

blowndeadline
9 March 2014, 17:44
What happened was, I had to approve the post since the OP was a new member with no previous posts. After I approved it, he edited the post, so I had to approve it again, but by that time you guys had commented in the thread, so it looked like it had disappeared.

I took out the photos in the last response from the OP to clean up the thread a little. Hope you don't mind.

Thanks.

I appreciate it, not sure what I did1
Thanks
Mike

mustangfreek
10 March 2014, 03:04
Crazy build man....Thing sure sticks out....i like the kryptec, but the red isnt for me..cool build though..

MoxyDave
10 March 2014, 12:25
Looks great man! I especially like the grip stippling. Good job.

KevinBLC
18 March 2014, 02:00
Crazy colors! I saw your build on the WEVO facebook page. I wonder how much you have wrapped up in this gun! Not for everyone, but you must get noticed on the range.

camomike
15 June 2014, 11:19
I like it. Where'd you get the smooth sided dust cover? Or was it part of the NTD receiver?

Computalotapus
15 June 2014, 12:20
That looks like a v7 ejection port cover. I know they make a smooth one.