Lantac USA SPADA-S Handguard

[UWone77]

Lantac USA (http://www.lantac-usa.com/catalogue/Muzzle-Devices.html) is pleased to announce the SPADA-S Handguard. The handguard features anti-rotational features on the barrel nut itself, so none of the handguard comes over the upper receiver. This prevents any incompatibility issues, commonly seen with Billet Uppers. In the photos below the 12.5" SPADA-S Handguard is featured along with the upcoming Lantac Billet Upper Advanced Receiver or UAR. Check in with Lantac USA (http://www.lantac-usa.com/catalogue/Muzzle-Devices.html) for their current offerings and upcoming products.


SPADA-S Handguard Features:

Patent Pending attachment system.

1.Will mount to any receiver as none of the handguard comes back over the upper.
2.Anti Slip Tab that engages with the barrel nut so that the handguard cannot slide forward without both clamping screws being removed fully.
3. Barrel Nut install does NOT require timing or adjusting to line up. Can be installed quickly and simply and torques to the correct setting without re adjustment to get correct alignment.
4. Powerful clamping of Handguard onto Barrel Nut with Anti Rotation Insert that is captured between the upper and the rail without any fixings.
5. Built in anti twist QD sling Swivel point on both sides.
6. Stainless Helicoil Inserts in key attachment positions.
7. RAIL EXTENSION SYSTEM R.E.S, allows users to extend the top rail via bolt in sections at different heights and lengths. More on that later.
8. 1.5'' Outside Diameter, making this one of the lowest profile handguards available.


http://i849.photobucket.com/albums/ab55/UWone77/Lantac2_zps103826fd.jpg (http://s849.photobucket.com/user/UWone77/media/Lantac2_zps103826fd.jpg.html)
http://i849.photobucket.com/albums/ab55/UWone77/Lantac3_zps3eb5726e.jpg (http://s849.photobucket.com/user/UWone77/media/Lantac3_zps3eb5726e.jpg.html)
http://i849.photobucket.com/albums/ab55/UWone77/Lantac4_zps18d3b12c.jpg (http://s849.photobucket.com/user/UWone77/media/Lantac4_zps18d3b12c.jpg.html)
http://i849.photobucket.com/albums/ab55/UWone77/Lantac_zps2d12bd35.jpg (http://s849.photobucket.com/user/UWone77/media/Lantac_zps2d12bd35.jpg.html)

[tappedandtagged]

Looks nice. Specs on the weight?

[Pyzik]

I like it!

[UWone77]

Looks nice. Specs on the weight?

That's all the information LanTac provided. I'll update when I get more.

[GOST]

I like it, looks a lot like a Centurion CMR. Interesting to see the gas tube used for anti-rotation.

[GOST]

I like that upper also.

[Slippers]

It looks like it'll use CMR accessories since the side contour and hole spacing are similar.

[Computalotapus]

Seen this in instagram it looks clean

[Ride4frnt]

Seen this in instagram it looks clean

I mentions Instagram on another forum I belong to and people responded like I was from Mars for liking to share photos with other people (albeit not all gun related)

Instagram name is k_warrenfeltz for anyone on insta.

In other news, this is a slick looking product, and may be an option for my next upper, since I can't build anymore lowers. I guess it's on to building a ton of uppers and swapping them out.

[Computalotapus]

I mentions Instagram on another forum I belong to and people responded like I was from Mars for liking to share photos with other people (albeit not all gun related)

Instagram name is k_warrenfeltz for anyone on insta.

In other news, this is a slick looking product, and may be an option for my next upper, since I can't build anymore lowers. I guess it's on to building a ton of uppers and swapping them out.



Followed my IG is the same as my forum name :)

[UWone77]

http://i849.photobucket.com/albums/ab55/UWone77/Tac_zps0142be51.jpg (http://s849.photobucket.com/user/UWone77/media/Tac_zps0142be51.jpg.html)
http://i849.photobucket.com/albums/ab55/UWone77/Lac2_zps13d6ff93.jpg (http://s849.photobucket.com/user/UWone77/media/Lac2_zps13d6ff93.jpg.html)

[Slippers]

Curious how the anti rotation feature works unless it is keyed to the upper receiver. Otherwise it only looks like it uses the gas tube as the anti rotate anchor.

Also, it seems Centurion Arms has noticed the similarities based on their recent Facebook posts.

[cqbg36]

So looks like a Geissele barrel nut design with a CMR "inspired" rail. The cuts look like the mark of Samson. So what is so groundbreaking and original?

[GOST]

I wish since the anti-rotation piece looks like the same HK uses that they would have made it part of the upper receiver.

[UWone77]

So looks like a Geissele barrel nut design with a CMR "inspired" rail. The cuts look like the mark of Samson. So what is so groundbreaking and original?

Anytime there is a new product on the market, it inevitably gets compared to other products on the market. Having said that, I don't think anyone is claiming this is ground breaking or original. Part of the job of the staff here is to report on new products, just because we do, doesn't mean we endorse the product or claim it's the next greatest thing. The consumer has to decide that for themselves.

[UWone77]

http://i849.photobucket.com/albums/ab55/UWone77/10256473_313446682144257_3020159277339236085_n_zps 7b9971d1.jpg (http://s849.photobucket.com/user/UWone77/media/10256473_313446682144257_3020159277339236085_n_zps 7b9971d1.jpg.html)

[Ride4frnt]

Now that is fancy.

[GOST]

That rail has an overbite.

[Battle Cock]

I don't even know the price and I'm already almost certain I'll have to get one for my upcoming build. Could you post weight specs when you have them?

[UWone77]

I don't even know the price and I'm already almost certain I'll have to get one for my upcoming build. Could you post weight specs when you have them?

I don't have any weights on them. When they decide on the final version of the product, I imagine they'll release that info.

[schambers]

that would looks pretty slick on an spr-type build

[nCarnage]

Sorry for bringing an old thread up.

Hope they make a 15" version and also the I.D. is slightly bigger than 1.5". Then I know what rail I want for my rifle.

[GOST]

Lantac says that they are also about to release their billet uppers very soon.

[Gaspipeshooter]

Apparently Lantac hasn't bought into the Keymod/MLok wars either...

[UWone77]

Sorry for bringing an old thread up.

Hope they make a 15" version and also the I.D. is slightly bigger than 1.5". Then I know what rail I want for my rifle.

Last check, LanTac is still tweaking these, so the Billet uppers like GOST mentioned will be out first.

[nCarnage]

Last check, LanTac is still tweaking these, so the Billet uppers like GOST mentioned will be out first.

Wow. Thanks for the update. Really liking this forum a lot.


Sent from my iPhone using Tapatalk

[robs_g23]

Very nice

[knives103]

I love the aesthetics, plus Lantac is a solid manufacturer. Might have to get this fir my next build.

[GOST]

SPADA 12.5"

https://fbcdn-photos-a-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-0/10676379_403062313182693_3221839698986951817_n.jpg ?efg=eyJpIjoidCJ9&oh=974463f96fb643a058b419dc7df9b7f6&oe=54FF6E0C&__gda__=1425658320_6e4a0944fe13230d2654efe0ceab60e d

[GOST]

Lantac is looking for 1000 Facebook shares to start a giveaway for the first one. From their FB page:

****** SHARE TO WIN************
LanTac SPADA 12.5" Rail, straight off production, 1000 shares and we will start a giveaway for one of the first share everywhere

[GOST]

Looks like there here.

https://scontent-a-ord.xx.fbcdn.net/hphotos-xap1/t31.0-8/10644347_416211411867783_3060465957890181133_o.jpg ?efg=eyJpIjoidCJ9

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/q85/s960x960/10842153_416464051842519_5794339312939862679_o.jpg ?efg=eyJpIjoidCJ9

[Tyrannosaur]

Looks like a centurion cmr had sex with a Samson evo rail

[Pyzik]

Looks like a centurion cmr had sex with a Samson evo rail
Good eye. Haha

[GOST]

Looks like a centurion cmr had sex with a Samson evo rail

You should have seen it, it was something to behold.

[Tyrannosaur]

That's what the extension is for... Deeper penetration.

[GOST]

https://scontent.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/11800376_499113376910919_2586261449487721759_n.jpg ?oh=9369e2e74502fa3f11d0319e76a228b6&oe=56451FDE

THIS IS SPADA ! ! ! ! !

The SPADA-S FreeFloat Handguard Systems are available for Dealer Pre-Order NOW!! Contact your authorized Lantac USA dealer, and tell them you want one!

Available in:

- 12.5"
- 13.5"
- 15.0"

Each rail comes with the 2.5" R.E.S. (Rail Extension System) and a 2" section of Picatinny Rail. Rail Panel Covers will be sold separately.

[Tyrannosaur]

Hmmmm. May need a 15" one of these. Gotta find a distributor now

[CarbonScoring]

I'd really like to get one for my UAR. Not sure if I feel like spending the money right now.

[Tyrannosaur]

Mike at ROG tactical emailed me back and said he's expecting them late August... I hate waiting

[GOST]

12.5'' Spada-S Freefloat Handguards are now available for pre order on our website. Delivery on these is 4-6 weeks.

http://www.lantac-usa.com/AR15-M16-M4-Rifle-Accessories/SPADE-S-12P5.html