Centurion Arms 9.5 and 11" CMR Rails

[UWone77]

Centurion Arms (http://www.centurionarms.net/) is releasing their popular CMR Rail in 2 additional lengths, the 9.5 and 11" to add to their existing 12 and 14" versions. They should be just a few weeks out and I believe Rainier Arms will have the first batch.

We'll release full specs and additional pictures as they come available. Until then, these "feature" sheets will have to do. Checkout Centurion Arms (http://www.centurionarms.net/)' new redesigned website here (http://www.centurionarms.net/) for more information.


http://i1016.photobucket.com/albums/af282/richdkim77/Image6_zpsf6e3a508.jpg (http://s1016.photobucket.com/user/richdkim77/media/Image6_zpsf6e3a508.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/Image7_zpsdd53b635.jpg (http://s1016.photobucket.com/user/richdkim77/media/Image7_zpsdd53b635.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/Image5_zpsfe5b3b6e.jpg (http://s1016.photobucket.com/user/richdkim77/media/Image5_zpsfe5b3b6e.jpg.html)

[GOST]

That 9.5" will look sweet with a 10.2" Noveske 300.

[UWone77]

In case anyone is wondering, a Noveske KX5 will not fit inside of a CMR rail, other than the part that is flat for the wrench.

[Computalotapus]

In case anyone is wondering, a Noveske KX5 will not fit inside of a CMR rail, other than the part that is flat for the wrench.

you know what rail it will fit under... a Odin Works KMod rail... just saying you can send that KX5 to me if you are not going to use it haha

[UWone77]

you know what rail it will fit under... a Odin Works KMod rail... just saying you can send that KX5 to me if you are not going to use it haha

Well, I can't give mine away, Sheri gave me an unmarked one without any logos. Not sure they want those escaping into the wild.

I did get an 11" and 9.5" CMR, but now they don't fit with the KX5, I'm wondering how I should build them up.

[RiverRat]

I did get an 11" and 9.5" CMR.... I'm wondering how I should build them up.

Here's step 1 for the 9.5" [pop]

Noveske 10.2" 300 Blackout with block and headspaced bolt (https://www.rainierarms.com/?page=shop/detail&product_id=2399)
https://www.rainierarms.com/img/shop/product/993dc5907e0a327523a98f1856e4cbf8.jpg

If you're worried about ensuring clearance for a can, you could stretch the barrel about a quarter of an inch with the Rainier 10.5" barrels.

[GOST]

In case anyone is wondering, a Noveske KX5 will not fit inside of a CMR rail, other than the part that is flat for the wrench.

And some lo-pro gas blocks also.

[Chainring]

Odinworks 10.5 and CMR 9.5. Hubba-hubba.

[UWone77]

Here's step 1 for the 9.5" [pop]

Noveske 10.2" 300 Blackout with block and headspaced bolt (https://www.rainierarms.com/?page=shop/detail&product_id=2399)
https://www.rainierarms.com/img/shop/product/993dc5907e0a327523a98f1856e4cbf8.jpg

If you're worried about ensuring clearance for a can, you could stretch the barrel about a quarter of an inch with the Rainier 10.5" barrels.

Eventually I'd like a 10.2" but I already have a Noveske 8.2" in 300... I'd like to actually pair this up with an AAC Ranger 3.

[UWone77]

http://i849.photobucket.com/albums/ab55/UWone77/IMG_1944_zps8e1f5435.jpg (http://s849.photobucket.com/user/UWone77/media/IMG_1944_zps8e1f5435.jpg.html)

[UWone77]

The 11 and 9.5" are now live at Rainier Arms, who as expected got the first batch. The introductory price on them is $246 and $235 respectively.

Check the link here: https://www.rainierarms.com/?page=shop/detail&product_id=4522 and https://www.rainierarms.com/?page=shop/detail&product_id=4522

[Calengor]

I really wish someone had a pic of a 9.5" CMR on a 10.5" barrel

[UWone77]

I really wish someone had a pic of a 9.5" CMR on a 10.5" barrel

I think I might be able to mock that up for you later tonight,

[Calengor]

That'd be great! I'm thinking an 11" CMR is too long for an 11.5" barrel, but the 9 should work beautifully on a 10.5" barrel. I like my Centurion MK18, but I think I may prefer a 10.5" with a slimmer handguard than the DD RIS.

[UWone77]

That'd be great! I'm thinking an 11" CMR is too long for an 11.5" barrel, but the 9 should work beautifully on a 10.5" barrel. I like my Centurion MK18, but I think I may prefer a 10.5" with a slimmer handguard than the DD RIS.


Turns out I gave away my last 10.5" barrel, so I had to use a DD 10.3" Sorry, the closest thing I had. I think if you had say an AAC 51T mount, your can would ride up almost flush to the rail if that's the look you're going for.

This is just a mock up....

http://i849.photobucket.com/albums/ab55/UWone77/IMG_1966_zpsaf566927.jpg (http://s849.photobucket.com/user/UWone77/media/IMG_1966_zpsaf566927.jpg.html)

[GOST]

That's a sexy little number.

[Calengor]

Turns out I gave away my last 10.5" barrel, so I had to use a DD 10.3" Sorry, the closest thing I had. I think if you had say an AAC 51T mount, your can would ride up almost flush to the rail if that's the look you're going for.

This is just a mock up....

http://i849.photobucket.com/albums/ab55/UWone77/IMG_1966_zpsaf566927.jpg (http://s849.photobucket.com/user/UWone77/media/IMG_1966_zpsaf566927.jpg.html)

That looks great, thanks for mocking that up!

[UWone77]

http://i849.photobucket.com/albums/ab55/UWone77/IMG_1942_zps0b94fc57.jpg (http://s849.photobucket.com/user/UWone77/media/IMG_1942_zps0b94fc57.jpg.html)

[browcs]

http://i849.photobucket.com/albums/ab55/UWone77/IMG_1942_zps0b94fc57.jpg (http://s849.photobucket.com/user/UWone77/media/IMG_1942_zps0b94fc57.jpg.html)

Very nice....

[GOST]

UW you wouldn't happen to have pics of the 11" rail with a 11.5" barrel?

[UWone77]

UW you wouldn't happen to have pics of the 11" rail with a 11.5" barrel?

I'm sorry I don't. I don't have a bare 11.5" Barrel. I was going to use my 11" CMR with a 12.5" as I think a 11.5" is going to sink into the rail too much for my tastes.

[UWone77]

Apparently Triple Bravo was listening to you GOST. If you look at his FB page, he just posted a 11.5" barrel on a 11" CMR & BattleComp.

[GOST]

Thanks for the heads up UW.

[Gaspipeshooter]

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/10549604_948782695148266_6072689837141106036_o.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/10557598_948782735148262_6647635320436659075_o.jpg

Triple Bravo's pics...

[akersc]

http://i849.photobucket.com/albums/ab55/UWone77/IMG_1942_zps0b94fc57.jpg (http://s849.photobucket.com/user/UWone77/media/IMG_1942_zps0b94fc57.jpg.html)

I have been telling the husband my next build needs to have a rail with the circle holes in it, now this just seals the deal! Computalotapus needs to make it happen!


Sent from my iPhone using Tapatalk

[Computalotapus]

I have been telling the husband my next build needs to have a rail with the circle holes in it, now this just seals the deal! Computalotapus needs to make it happen!


Sent from my iPhone using Tapatalk

You know I am not going to say no.

[UWone77]

You guys definitely need to get a CMR Rail.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2268_zps08a05d77.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2268_zps08a05d77.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2269_zps04385449.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2269_zps04385449.jpg.html)

[Computalotapus]

You guys definitely need to get a CMR Rail.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2268_zps08a05d77.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2268_zps08a05d77.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2269_zps04385449.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2269_zps04385449.jpg.html)
Need to get a NFA Trust setup

[akersc]

You guys definitely need to get a CMR Rail.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2268_zps08a05d77.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2268_zps08a05d77.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2269_zps04385449.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2269_zps04385449.jpg.html)

Oh how you tease me with all that sexy! I loooove it!


Sent from my iPhone using Tapatalk

[UWone77]

Need to get a NFA Trust setup

Like last week my man. Your wife has the bug now. [:D]

[Gaspipeshooter]

Need to get a NFA Trust setup

http://www.coyoterifleworks.com/nfa-trust/

They are giving 10 to Stickman's 100k giveaway. As I recall you "don't Facebook", but for a mere $85 you can have yours in one day.

[Computalotapus]

http://www.coyoterifleworks.com/nfa-trust/

They are giving 10 to Stickman's 100k giveaway. As I recall you "don't Facebook", but for a mere $85 you can have yours in one day.


Yep yep already had it bookmarked. I won't be getting in on the $85 deal but I plan on doing a NFA Trust. And Facebook is just to much "Family Drama" so I stay off it. Had it at one point, I know you can pick and choose who follows and who you follow but when it was family it always ended with phone calls "why did you unfriend me?"......"cause you are bat poop crazy!!!!" Drama, drama, drama.

[GOST]

You guys definitely need to get a CMR Rail.


http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2268_zps08a05d77.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2268_zps08a05d77.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_2269_zps04385449.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_2269_zps04385449.jpg.html)

Very nice, what's the specs on her?

[UWone77]

Very nice, what's the specs on her?

10.3" Daniel Defense Barrel
9.5" Centurion Arms CMR
Rainier Arms UltraMatch Upper
Rainier Arms Raptor
Rainier Arms NiB BCG
Seekins Bolt Catch, Trigger Guard
Battle Arms Development BAD-ASS
Magpul UBR, MIAD, MBUS PRO
Aimpoint T1 on a Bobro Mount w/ IOCover
AAC Mini & Blackout
Noveske Rifleworks Gen I SBR Lower

[GOST]

Thx UW, been wanting to try a CMR out. Trying decide on either a 10.3" or 11.5".

[Aragorn]

Well... I've now got an 11" CMR and fde accessory pack coming from Rainier now.

[UWone77]

Thx UW, been wanting to try a CMR out. Trying decide on either a 10.3" or 11.5".

Which length CMR? 9.5?

[GOST]

A 9.5" CMR with a 10.3" barrel, the 11" looks to be a little longer than I would like.

[Aragorn]

Question. I've got an 11" CMR coming with an accessory pack, and after looking at more pics, I'm wondering if I'm gonna have an issue with light and panel placement. The scout mount if used in conjunction with the panels looks like it would only leave room for one panel per side. Can anyone confirm if that's true? A single panel looks like it would be too short to protect my forward hand. I suppose I could cut to fit?

Also, say I don't run the light mount. What's the furthest forward I could mount a pair of panels with no gap between them? Judging by pictures it looks like the furthest forward would be... all the way back...

[UWone77]

Question. I've got an 11" CMR coming with an accessory pack, and after looking at more pics, I'm wondering if I'm gonna have an issue with light and panel placement. The scout mount if used in conjunction with the panels looks like it would only leave room for one panel per side. Can anyone confirm if that's true? A single panel looks like it would be too short to protect my forward hand. I suppose I could cut to fit?

Also, say I don't run the light mount. What's the furthest forward I could mount a pair of panels with no gap between them? Judging by pictures it looks like the furthest forward would be... all the way back...


On a 11" CMR, if you use the Scout Light Mount, You'll only be able to get 1 panel on that side. The other side, you can get 2 panels. The furthest forward you can place it on the sides would be the 3rd screw hole from the front.

[Aragorn]

Well.... shiz-nit. Guess I'll play with it when everything shows up and see what I can do. I could always cut back a panel on the front end to make it clear the mount I suppose. Failing that I'd have to see if anyone wanted to trade an x300 for a FDE mini scout with a "well loved" look to it.

[UWone77]

Well.... shiz-nit. Guess I'll play with it when everything shows up and see what I can do. I could always cut back a panel on the front end to make it clear the mount I suppose. Failing that I'd have to see if anyone wanted to trade an x300 for a FDE mini scout with a "well loved" look to it.

I wonder if you could strategically place the handstops on the handguard to give you the look you wanted.

[Aragorn]

While I'm here brainstorming, how about a pic of a CMR with short Fortis shift? That's something else I've been thinking about.

[Aragorn]

I wonder if you could strategically place the handstops on the handguard to give you the look you wanted.

Eh, it's not so much about the look. I only shoot with gloves when it's cold enough that it requires them, so panels are required to protect me from a hot forend. Therefore the panels need to be long enough that my hand doesn't hang off the front or back. It's just about space and finding a way to get my light mounted. I'd probably rather use an x300 at the 12:00 but it's hard to justify making the switch when A) I've already got a perfectly good mini scout just hanging out. B) Light probably won't always be mounted anyways , and C) can't throw down for a new light right now as things are tight and getting the gun back up and running takes priority.

[UWone77]

While I'm here brainstorming, how about a pic of a CMR with short Fortis shift? That's something else I've been thinking about.

I'll see what I can come up with tonight.

[Aragorn]

Sweet. Thanks!

[Aragorn]

Anyone know I'd a Vltor .625 clamp on gas block will fit under one of these?

[GOST]

I'd read that the VLTOR takes a little filing to fit.

[Aragorn]

Under the .625? I'd read that about the .750...

A set screw .625 should be fine, but the clamping version looks like it sticks down a bit further. That's what I'm wondering about.

[GOST]

I believe that the .625 and .750 are the same size with different size holes. I may be incorrect though.

[Aragorn]

Not the Vltors, they're one of the few companies who did it right, and didn't just bore a smaller hole in the same size blank.