UWone77
9 August 2014, 22:31
WMD Guns (http://www.wmdguns.com/shop-now/firearms/wmd-guns-ar-15-chassis.html?SID=e55f0f98d6bd10f029ff69a5b956514b) posted this awhile back, but I thought I'd post it here since we have so many Nickel Boron fans. WMD Guns (http://www.wmdguns.com/shop-now/firearms/wmd-guns-ar-15-chassis.html?SID=e55f0f98d6bd10f029ff69a5b956514b) introduces "the Chassis." The concept is to have WMD guns start your rifle project by Nickel Boron coating the main components. You simply finish the gun by installing your favorite furniture, handguards, muzzle device, sights, ect. This reduces the cost for those wanting their rifles coated, and not having to pay for parts they already have or were going to swap out anyway. Checkout WMD Guns here (http://www.wmdguns.com/shop-now/firearms/wmd-guns-ar-15-chassis.html?SID=e55f0f98d6bd10f029ff69a5b956514b) .
Specifications:
LOWER RECEIVER: Billet 7075-T6 Aluminum Machined To Mil Spec Dimensions, Front Magazine Well Finger Grips, Nib-X Nickel Boron Coated For Durability
UPPER RECEIVER: Mil-Spec 7075-T6 Aluminum Forging With M4 Feed Ramps. Nib-X Coated For Lubricity And Durability
BARREL: Match Grade Chrome Moly Vanadium Steel, 1:7 Twist, 16″ Government Or M4 Profile, Carbine Gas System, Nitromet QPQ Salt Bath Nitrided In The Bore For Extended Life And Accuracy, Nib-X Coated On The Outside For Durability And Heat Dissipation
BARREL EXTENSION: NiB-X Coated Barrel Extension For Extremely Smooth Locking And Unlocking With The Bolt
GAS SYSTEM: Low Profile Gas Block, CNC Machined From 4140 Steel And Nib-X Finished, Nitromet QPQ Carbine Length Gas Tube, Direct Impingement
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Nib-X Coated For Reliability And Ease Of Cleaning, Properly Staked Gas Key
FIRE CONTROL GROUP: Hammer, Trigger and Disconnect coated in NiB-X for lower pull force (<6 lbs) and smooth reset
BUFFER: Carbine Buffer
SIGHTS: Optics Ready
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum, Nib-X Coated Inside And Out
Made In The USA!
http://i849.photobucket.com/albums/ab55/UWone77/WMD_zpsc5e9ee1b.jpg (http://s849.photobucket.com/user/UWone77/media/WMD_zpsc5e9ee1b.jpg.html)
Also available in the "Ultimate Chassis" with a more traditional black topcoat
http://i849.photobucket.com/albums/ab55/UWone77/10553490_658817460873225_7396868523387889530_n_zps c73369f9.png (http://s849.photobucket.com/user/UWone77/media/10553490_658817460873225_7396868523387889530_n_zps c73369f9.png.html)
Specifications:
LOWER RECEIVER: Billet 7075-T6 Aluminum Machined To Mil Spec Dimensions, Front Magazine Well Finger Grips, Nib-X Nickel Boron Coated For Durability
UPPER RECEIVER: Mil-Spec 7075-T6 Aluminum Forging With M4 Feed Ramps. Nib-X Coated For Lubricity And Durability
BARREL: Match Grade Chrome Moly Vanadium Steel, 1:7 Twist, 16″ Government Or M4 Profile, Carbine Gas System, Nitromet QPQ Salt Bath Nitrided In The Bore For Extended Life And Accuracy, Nib-X Coated On The Outside For Durability And Heat Dissipation
BARREL EXTENSION: NiB-X Coated Barrel Extension For Extremely Smooth Locking And Unlocking With The Bolt
GAS SYSTEM: Low Profile Gas Block, CNC Machined From 4140 Steel And Nib-X Finished, Nitromet QPQ Carbine Length Gas Tube, Direct Impingement
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Nib-X Coated For Reliability And Ease Of Cleaning, Properly Staked Gas Key
FIRE CONTROL GROUP: Hammer, Trigger and Disconnect coated in NiB-X for lower pull force (<6 lbs) and smooth reset
BUFFER: Carbine Buffer
SIGHTS: Optics Ready
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum, Nib-X Coated Inside And Out
Made In The USA!
http://i849.photobucket.com/albums/ab55/UWone77/WMD_zpsc5e9ee1b.jpg (http://s849.photobucket.com/user/UWone77/media/WMD_zpsc5e9ee1b.jpg.html)
Also available in the "Ultimate Chassis" with a more traditional black topcoat
http://i849.photobucket.com/albums/ab55/UWone77/10553490_658817460873225_7396868523387889530_n_zps c73369f9.png (http://s849.photobucket.com/user/UWone77/media/10553490_658817460873225_7396868523387889530_n_zps c73369f9.png.html)