UWone77
15 August 2014, 11:45
Looks like Bravo Company USA (http://www.bravocompanyusa.com) is even getting into the pistol lower act. As usual for BCM (http://www.bravocompanyusa.com), their lowers are 7075 T6 aluminum and hard coat anodized. If you want one of the best mil-spec lowers out there that's properly built, you can't go wrong with BCM (http://www.bravocompanyusa.com). The BCM Pistol Lower (http://www.bravocompanyusa.com) is also compatible with the SigTac SB15 Brace.
Looks like G&R Tactical (http://www.gandrtactical.com/cgi-bin/commerce.cgi?preadd=action&key=LWR-BCM-PISTOL) has them in stock.
Specifications:
Machined from Aluminum Forgings 7075-T6
Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2
BCM® Milspec 7075-T6 Pistol Receiver Extension (1.2” outside diameter. Fit the ATF compliant SigTac SB15 type pistol stabilizing brace. Works with carbine buffer and action springs.
Staked M4 Lock Nut
USGI H Buffer (1 USGI Tungsten, 2 Steel)
BCM Trigger Guard
Low Shelf for RDIAS installation
Low Shelf for Accuwedge use
Un-notched Hammer compatible with 9mm use
Fire Controls marked SAFE and SEMI
http://i849.photobucket.com/albums/ab55/UWone77/Lower_Pistol1_zps9f14feb1.jpg (http://s849.photobucket.com/user/UWone77/media/Lower_Pistol1_zps9f14feb1.jpg.html)
Looks like G&R Tactical (http://www.gandrtactical.com/cgi-bin/commerce.cgi?preadd=action&key=LWR-BCM-PISTOL) has them in stock.
Specifications:
Machined from Aluminum Forgings 7075-T6
Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2
BCM® Milspec 7075-T6 Pistol Receiver Extension (1.2” outside diameter. Fit the ATF compliant SigTac SB15 type pistol stabilizing brace. Works with carbine buffer and action springs.
Staked M4 Lock Nut
USGI H Buffer (1 USGI Tungsten, 2 Steel)
BCM Trigger Guard
Low Shelf for RDIAS installation
Low Shelf for Accuwedge use
Un-notched Hammer compatible with 9mm use
Fire Controls marked SAFE and SEMI
http://i849.photobucket.com/albums/ab55/UWone77/Lower_Pistol1_zps9f14feb1.jpg (http://s849.photobucket.com/user/UWone77/media/Lower_Pistol1_zps9f14feb1.jpg.html)