PDA

View Full Version : My SBR build



Das Jared
15 September 2014, 17:08
Howdy, figured I would post my inaugural post to this forum with a lil custom build. I am just about finished with school, and landed a job in the petrochemical industry in Houston about 4 months ago. Finally making some real money, and am able to start playing a little more.

Lower- Noveske/SWR special edition
Trigger- Geissele SSA-E
LPK- spike's minus fcg. (This is my favorite lpk I have used in a build to date.)
Mag release- Odinworks XMR. Looks cool as hell, still not so sure on functionality.
Vltor milspec 5 position receiver extension
Magpul ASAP QD
Vltor stock
Tango Down Large grip
Noveske take down pins
H2 or H3 buffer

Future plans include BADASS safety lever, and KNS take down pins.

Upper-
Factory stripped Noveske upper.
Planning for- BCM KMR, 10", or 11" Noveske NSR, with troy M4 sights, Young MFG bcg, and an 11.5" BCM barrel, wearing an Syrac gas block, and an AAC brake.

My goal is to build as close to a factory Noveske rifle as possible. I am expecting the tax stamp back any day now, efiled form 1. Shitty cellphone pics to follow, for now.

sent from Jennifer Lawrence's bedroom

WHSmithIV
15 September 2014, 17:10
Picture please so I can be jealous? :)

Das Jared
15 September 2014, 17:16
Hmmm, its not letting me post pictures from tapatalk right now..:( let me see what I can do.

sent from Jennifer Lawrence's bedroom

Ride4frnt
15 September 2014, 18:00
You have to host them somewhere and then link to them using img tags. WEVO won't host images like some other forums on tapatalk will

WHSmithIV
15 September 2014, 18:23
Put a picture in photobucket. Click on the picture and highlight the link at the top in the web browser. Right click your mouse with the link highlighted and select "Copy". Then come back here to the forum, write a simple reply "here's the pic so you guys can be jealous", click the little square box above where you type, now a little window will open. It will have "http://" in it. Just click in that little box and press your backspace button to delete that. Right click your mouse and select "Paste". Bingo, the link to the photobucket picture will be there. Then say OK and the picture will be here too :)

You can put that picture ANYWHERE on the internet, open it to view it - copy the link and it should show up here too.

If you need help to get it done, send me a personal message here in the forum. I'll send you my e-mail address, you simply e-mail me the picture and I'll set it up for you and send you the link back you post that you can simply cut and paste into a message :)

-Will-

Das Jared
15 September 2014, 19:11
I'm photobucket and flickr savvy, but if I have to go through all that trouble, then I'm going to break out the dslr lol

six8
15 September 2014, 19:15
I'm photobucket and flickr savvy, but if I have to go through all that trouble, then I'm going to break out the dslr lol
That's the spirit! Can't wait to see the pics

Ride4frnt
15 September 2014, 19:53
I'm photobucket and flickr savvy, but if I have to go through all that trouble, then I'm going to break out the dslr lol

If you don't wanna mess with the dslr photobucket mobile app is quick. And you can copy the links from the app. Flickr app won't allow you to get the links in the app.

That said, I really needa start using my SLR for photos.

Das Jared
16 September 2014, 04:38
Same here, as well. Between 70hr work weeks and with school 3 nights a week, when I get home, I really don't feel like doing sh*t.

Das Jared
20 September 2014, 14:50
An update- Still no pictures, BUT, ordered the following-
BCM KMR 10" rail
BCM 11.5" barrel
BCM set screw gas block
Young MFG chrome bolt
BCM H3 buffer

Still need-
Troy M4 backup sights
AAC brake
Optic

egress81
24 September 2014, 06:41
Cant wait to see pics of this build.

Also what part of Houston are you? I am in Southern area of town.

WHSmithIV
24 September 2014, 08:50
You do know that to build a SBR you need to get an ATF tax stamp for it don't you? Otherwise, build it as a pistol and don't put a stock or vertical foregrip on it is all. You can put a SIG Sauer pistol brace on it.

Gaspipeshooter
24 September 2014, 17:12
You do know that to build a SBR you need to get an ATF tax stamp for it don't you? Otherwise, build it as a pistol and don't put a stock or vertical foregrip on it is all. You can put a SIG Sauer pistol brace on it.


I am expecting the tax stamp back any day now, efiled form 1. Shitty cellphone pics to follow, for now.

sent from Jennifer Lawrence's bedroom

As the saying seems to be nowadays: "I'm just gonna leave this right here..."

WHSmithIV
24 September 2014, 18:05
Just don't build it before that tax stamp comes in is all. I'd hate to see a decent gun owner get screwed by the system. You probably should store the barrel somewhere else than at your home until that tax stamp arrives. ATF has been known to raid folks homes and nail them just for having parts to make a SBR with no tax stamp for it. Ideally, you don't buy the parts to make one until you have the tax stamp for it.

Personally, I'd leave the stripped lower receiver on my shelf except for buying the parts that could be used for any build - pistol or rifle. Then, I'd wait for the tax stamp before ordering and having the barrel and stock delivered.

Das Jared
24 September 2014, 18:25
Lower was assembled and tested on standard 16" uppers, while waiting for approval. Barrel is still in mail.

Das Jared
24 September 2014, 18:26
Received my Young MFG chrome bcg. Good lord, this thing is pure sex. Also received approval on the form 1. Efiled, 8-23-14, approved today, 9-24-14

Das Jared
5 October 2014, 03:52
http://i.imgur.com/JMTdnO2.jpg

Das Jared
5 October 2014, 03:54
All finished. Put 4-500 rounds through it yesterday, it performed like a champ. Its incredibly flat shooting with the AAC brake

JoshAston
5 October 2014, 05:19
Looks good. I love the looks of the TD pistol grip, just hate the way it feels.

Das Jared
6 October 2014, 16:20
Bravo Company Manufacturing 11.5" SBR: http://youtu.be/LWzZ065_P4Q

six8
6 October 2014, 19:59
Bravo Company Manufacturing 11.5" SBR: http://youtu.be/LWzZ065_P4Q

Damn, fast finger

GOST
7 October 2014, 01:59
http://i.imgur.com/JMTdnO2.jpg

http://i.imgur.com/JMTdnO2.jpg
Das Jared is this your pic or Aaronp220's?

GOST
7 October 2014, 02:09
https://m.youtube.com/watch?feature=youtu.be&v=LWzZ065_P4Q

Which 11.5" BCM barrel is that, is it the ELW?

Das Jared
7 October 2014, 02:16
http://i.imgur.com/JMTdnO2.jpg
Das Jared is this your pic or Aaronp220's?
Aaronp220's, he is a member here and a good buddy of mine.

Das Jared
7 October 2014, 02:17
https://m.youtube.com/watch?feature=youtu.be&v=LWzZ065_P4Q

Which 11.5" BCM barrel is that, is it the ELW?
No it is not, I can't remember off the top of my head, but it isn't the elw

Vesticles
7 October 2014, 06:58
Looks good!

Das Jared
8 October 2014, 16:27
Its the BCM BFH barrel.

GOST
8 October 2014, 19:50
I've got a 14.5" BCM BFH, waiting for the 11.5" ELW to be released. It's been a great barrel.

AaronP220
10 October 2014, 08:01
This is one of the flattest shooting guns i've ever shot.

WHSmithIV
10 October 2014, 10:58
I'm happy for you - and a bit jealous of course :)
I'm looking forward to seeing the pics of it too!

WHSmithIV
10 October 2014, 11:08
This is one of the flattest shooting guns i've ever shot.

I love that SBR of yours Aaron. I've never had the opportunity to fire anything with a can on it. Sure would like to though. In the future I may actually do the paperwork for one. Not sure how well a can would work with a 7.62x39 but it would be interesting to find out.

It kind of sucks that for a SBR with a can on it 2 tax stamps would be needed also.

Das Jared
10 October 2014, 20:55
I think there is some confusion in the thread. The rifle pictured is mine, and the one I built. Aaron took pictures of it, I shared the good pic.

WHSmithIV
10 October 2014, 21:04
I think there is some confusion in the thread. The rifle pictured is mine, and the one I built. Aaron took pictures of it, I shared the good pic.

Ahh OK Das Jared - I was indeed confused. Well, I love that SBR of yours then Das Jared [:)]

mustangfreek
10 October 2014, 21:50
http://i.imgur.com/JMTdnO2.jpg
Das Jared is this your pic or Aaronp220's?


Me likey......

So 11.5" barrel and 10" rail with what a 762-sd or SDN-6 ?

Das Jared
11 October 2014, 04:13
SDN-6

AaronP220
11 October 2014, 16:30
We didn't fire it much with the can, unfortunately. I bed it would make it flatter.

Das Jared
14 October 2014, 18:17
It certainly made it much more pleasant to shoot.

Das Jared
14 October 2014, 18:25
http://imgur.com/vNAk29R

GOST
14 October 2014, 19:33
Oh no, a southpaw. I kidd, nice setup.

Das Jared
16 October 2014, 02:36
Lol, thank you

Das Jared
23 October 2014, 19:05
http://imgur.com/EA7sAcG
http://imgur.com/Z9Bu3CT
http://imgur.com/wEfPNEV
http://imgur.com/phPWxZN
http://imgur.com/augmxtG