Nathan_Mack
18 October 2014, 16:35
In my search for a low profile gas block for my SPR build, I came across this one made by a company in Rockledge, FL named Naroh Arms. They're a new start up and they are working with CNC to turn out some very nice things. The owner has off-shoot from a local gun maker and is doing his own thing. They make keymod and M-LOK rail accessories, too.
http://i1072.photobucket.com/albums/w363/JasonMPD/Mobile%20Uploads/20141018_1903372.jpg
The tolerances are outstanding and the fit to the barrel is perfect. I was told Naroh Arms has an obsession with perfect tolerances and it shows with this product. They also make a set screw version which should have enough meat on it to accept a pin modification.
The finish on the gas block is great, too. I'm looking forward to using it and after 200 or 300 rounds I will report back with durability and functionality.
http://www.naroharms.com
http://i1072.photobucket.com/albums/w363/JasonMPD/Mobile%20Uploads/20141018_1903372.jpg
The tolerances are outstanding and the fit to the barrel is perfect. I was told Naroh Arms has an obsession with perfect tolerances and it shows with this product. They also make a set screw version which should have enough meat on it to accept a pin modification.
The finish on the gas block is great, too. I'm looking forward to using it and after 200 or 300 rounds I will report back with durability and functionality.
http://www.naroharms.com