View Full Version : New Sponsor: Arisaka Defense
Naytwan
23 March 2016, 22:38
http://uploads.tapatalk-cdn.com/20160324/dbfea4698d4367deccc570ab8f44ab32.jpg
So I'm on a half acre lot and is a rectangle. The house is on the front part of the rectangle. This was taken from my back door. This is a pretty powerful light.
http://uploads.tapatalk-cdn.com/20160324/c6ae50a9df0dd011090df00f7c9af65d.jpg
Added a Surefire UE pressure switch. I like it.
Slippers
7 April 2016, 19:30
Just got in another batch of Malkoff heads, so 300 series lights are back on the site. Get them while you can. :)
http://arisakadefense.com/products/300-series-light
http://i.imgur.com/BguxlGY.jpg
Joelski
8 April 2016, 03:57
http://uploads.tapatalk-cdn.com/20160324/dbfea4698d4367deccc570ab8f44ab32.jpg
So I'm on a half acre lot and is a rectangle. The house is on the front part of the rectangle. This was taken from my back door. This is a pretty powerful light.
http://uploads.tapatalk-cdn.com/20160324/c6ae50a9df0dd011090df00f7c9af65d.jpg
Added a Surefire UE pressure switch. I like it.
Is your grass painted?
UWone77
8 April 2016, 08:24
Just got in another batch of Malkoff heads, so 300 series lights are back on the site. Get them while you can. :)
http://arisakadefense.com/products/300-series-light
Good timing, Steve Coulston's article on the lights just dropped on Guns & Tactics
http://www.gunsandtactics.com/let-there-be-light
Naytwan
8 April 2016, 09:00
Is your grass painted?
Naw. It's a tall grass. Gets 4 ft tall.
Pyzik
14 April 2016, 05:33
Not my rifle, just a shot of some's rifle with the MLOK offset.
https://farm2.staticflickr.com/1631/25821714583_e7b69bb6d6_b.jpg (https://flic.kr/p/FkM38z)
Ariaska MLOK (https://flic.kr/p/FkM38z) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Slippers
19 April 2016, 13:27
We've had people asking us quite a bit if the new Streamlight Protac Rail Mount lights work with our Scout mounts. They do. The Streamlight bodies have the same lug shape and hole locations as Surefire. This also means they leave quite a bit of material that causes clearance problems, but unfortunately the Streamlight bodies aren't compatible with Scout heads and tailcaps.
They seem pretty decent for a budget, Chinese made light. Beam profile is similar to the Malkoff E1T and Surefire M300C.
One caveat: the 2 cell Protac Rail Mount is a bit difficult to use with our inline mounts because Streamlight made the rear of the body longer, and it partially obscures the forward-most mounting screw. You'll have to use a ball-tipped allen key, or go with our offset scout mount instead.
Additional details: http://arisakadefense.com/blogs/news/120119043-review-comparison-streamlights-budget-scout-light-the-protac-rail-mount
Comparison pictures:
http://i.imgur.com/uxeiSaI.jpg
http://i.imgur.com/v7UIlz0.jpg
http://i.imgur.com/a9oXnxf.jpg
Dstrbdmedic167
30 April 2016, 18:12
http://uploads.tapatalk-cdn.com/20160501/cfbffc96f1b513f99e9d2e552ffd3d00.jpg
Sent from my iPhone using Tapatalk
Slippers
30 April 2016, 19:22
http://uploads.tapatalk-cdn.com/20160501/cfbffc96f1b513f99e9d2e552ffd3d00.jpg
Sent from my iPhone using Tapatalk
Oooo, Centurion M-Lok.
Dstrbdmedic167
4 May 2016, 18:41
1098
Slippers
6 May 2016, 05:20
We have a very limited number of Streamlight Protac Rail Mount 1 combo packages available. These include your choice of Arisaka Inline or Offset Scout mount, and the pricing is cheaper than you can purchase one of these lights online from any vendor if you factor in the mount. The forum discount code "wevo" will also work. :)
http://arisakadefense.com/products/streamlight-protac-rail-mount-1
http://i.imgur.com/yn7SEr4.jpg
http://i.imgur.com/wtPs6eL.jpg
http://i.imgur.com/LyGAfV4.jpg
http://i.imgur.com/F7HLc7q.jpg
http://i.imgur.com/a9oXnxf.jpg
schambers
6 May 2016, 07:49
Have you considered making light bodies that are compatible with Elzetta heads?
Thanks Will - order placed.
They're a little on the ugly side but hard to beat that deal
Sent from my SM-N910V using Tapatalk
Slippers
6 May 2016, 08:19
Have you considered making light bodies that are compatible with Elzetta heads?
Yes, we considered it awhile back, but Elzetta has a relationship with one of our competitors.
schambers
6 May 2016, 13:24
booo
Slippers
6 May 2016, 13:38
Thanks Will - order placed.
Thank you! I sent you a little something extra, too. :)
Cotton68spc
6 May 2016, 19:53
Yes, we considered it awhile back, but Elzetta has a relationship with one of our competitors.
Would love to see this but understand
I own several Elzetta lights, top notch stuff, but honestly, how big is the market for Elzetta bodies? I'd say a fraction of a fraction of guys using Surefire. Probably not worth it from a manufacturer stand point, but I could be wrong.
Thank you! I sent you a little something extra, too. :)
Order arrived today, the "little something extra" is awesome [adore] very much appreciated !!
Edit: Now, let's talk about customer service. I had some (self induced) problems getting the mount/light to work on a specific upper rail setup. I sent Will a note just to let him know there might be issues. He goes into the shop, puts together the same set of parts and gets it to work. Sends me a note, "Try doing this ..." It seems I was using the wrong points in the mounting slots for the screws that hold the light. You would think an old fart could have figured it out [bash] I honestly didn't think there was enough adjustment to make it work, so I didn't try. [BD]
Problem solved !! That is customer service !!
Jerry R
10 May 2016, 08:42
After the install ...
https://c1.staticflickr.com/8/7326/27194539752_d4a0f0ce7b_o.jpg (https://flic.kr/p/Hr68e3)IMG_1904-1911 Arisaka Size 1500 (https://flic.kr/p/Hr68e3) by Jerry R (https://www.flickr.com/photos/9663868@N05/), on Flickr
Naytwan
16 May 2016, 18:03
I got my protac today. One thing that really stands out vs the 300 is how yellow the light is. The 300 is much whiter and it seems brighter because of it. The price is right and it does feel well built. Also on my parallax Keymod rail with magpul Mbus the head won't clear. I had to mount it upside down till I get my Mbus Pro in. Then I'll mount it up like I want it.
I'm running the offset mount BTW. It probably would clear fine with the inline mount.
http://uploads.tapatalk-cdn.com/20160517/0a97ba05f763c6c44e1fafdc8cf889f5.jpg
Sent from my SM-N910V using Tapatalk
I've got a 300 series light and inline mount due to arrive tomorrow! So excited!!
Sent from my iPhone using Tapatalk
Naytwan
20 May 2016, 22:53
https://farm8.staticflickr.com/7196/26537296724_0fe8d0272b_z.jpg
Messing around with the GoPro and the ProTac. I love the mount, finally have the light mounted how I want it. Clears the Mbus sights now. I may still move it up once I get some Mbus Pros. I still like the 300 better but this is definitely a usable light.
Slippers
26 May 2016, 07:05
I sorted the blem bin today, so there's a bunch of stuff up at http://arisakadefense.com/products/cosmetic-blems for 30% off or more. Blems will not ship until after the weekend.
Well I thought I had a 300 series light coming to me. Tracking info said it was delivered but there's no package anywhere to be found. Shipping info is all correct. Either USPS fumbled something or it was possibly stolen off my door step or out of my mail box...
Sent from my iPhone using Tapatalk
Slippers
27 May 2016, 11:27
Well I thought I had a 300 series light coming to me. Tracking info said it was delivered but there's no package anywhere to be found. Shipping info is all correct. Either USPS fumbled something or it was possibly stolen off my door step or out of my mail box...
Sent from my iPhone using Tapatalk
I searched for "Farva" but didn't get any hits in our orders. :) Email me and I'll send you another one, and also check on USPS. will@arisakadefense.com
Joelski
27 May 2016, 12:15
i've had the p.o. here mark items delivered before that didn't arrive until the next day.
I searched for "Farva" but didn't get any hits in our orders. :) Email me and I'll send you another one, and also check on USPS. will@arisakadefense.com
I may end up doing that. I'm going to try and get ahold of USPS and see what's up as I highly doubt it was a mistake on yalls end.
i've had the p.o. here mark items delivered before that didn't arrive until the next day.
I thought this same thing. It shows delivered on the 18th... I got so busy with work and such it completely slipped my mind.
Sent from my iPhone using Tapatalk
I searched for "Farva" but didn't get any hits in our orders. :) Email me and I'll send you another one, and also check on USPS. will@arisakadefense.com
Package found and received! I knew it wasn't an issue on yalls part. Glad you didn't have to send another one out and be out some money BUT the gesture is greatly appreciated, more than you know. That's the signs of amazing customer service! Thanks again! Pictures to follow later.
Sent from my iPhone using Tapatalk
Slippers
3 June 2016, 07:31
Glad it worked out. :)
While we're out of 300 and 600 series complete lights, we did happen to get in another small batch of Streamlight Protac Rail Mount lights, both 1 and 2 cell versions. These include the stock picatinny mount, clicky and tape switch tailcaps, and you can add an inline or offset scout mount for reduced pricing.
http://i.imgur.com/F7HLc7ql.jpg
velocity2006
10 June 2016, 11:59
http://i.imgur.com/yKRGodx.jpg
K1tt3n5
30 June 2016, 23:36
Nothing but great things to say about all of my arisaka products.
Slippers
1 July 2016, 12:39
We're waiting on tailcaps to come in next week, but there are a small number of 600 series complete lights available right now. 300 series complete lights will be available when the tailcaps arrive. Vertical grips for KeyMod and M-Lok are also back in stock.
We also have a few new products in our lineup including our KeyMod QD mounts, which are 7075 aluminum, 0.19 oz, and 0.167" high, and use BCM's patent pending reverse threaded screws.
http://arisakadefense.com/products/qd-mount-keymod
http://cdn.shopify.com/s/files/1/0659/4513/products/IMG_8250_a3a471f7-4017-464f-85e7-733d2957a5c6_large.JPG?v=1467393053
http://cdn.shopify.com/s/files/1/0659/4513/products/eUrilUpgTWRoIOb3UoPH2ufXmwgk_aHzt0w3ilhgJJA_large. jpg?v=1467393053
http://cdn.shopify.com/s/files/1/0659/4513/products/nWb5_KUHdpGKSWbfjVpZUVCoOas1PoDdl060mh9HFQw_large. jpg?v=1467393053
The other new products are low profile Picatinny rail sections for KeyMod and M-Lok. These are 5 slots long and use three screws for maximum strength, spreading the stress of high torque accessories like bipods or vertical grips over more slots on your rail. The reduced height pulls Picatinny accessories a little closer, too.
KeyMod: http://arisakadefense.com/products/low-profile-picatinny-rail-keymod
M-Lok: http://arisakadefense.com/products/low-profile-picatinny-rail-m-lok
http://cdn.shopify.com/s/files/1/0659/4513/products/Arisaka_Pic-LP2_b2570251-4990-426e-a2a3-0840c8f0f639_large.JPG?v=1467214773
http://cdn.shopify.com/s/files/1/0659/4513/products/Arisaka_Pic-LP6_large.JPG?v=1467214773
Comparison to normal Picatinny rail section:
http://cdn.shopify.com/s/files/1/0659/4513/products/Arisaka_Pic-LP0_large.JPG?v=1467214773
We're waiting on tailcaps to come in next week, but there are a small number of 600 series complete lights available right now. 300 series complete lights will be available when the tailcaps arrive. Vertical grips for KeyMod and M-Lok are also back in stock.
We also have a few new products in our lineup including our KeyMod QD mounts, which are 7075 aluminum, 0.19 oz, and 0.167" high, and use BCM's patent pending reverse threaded screws.
http://arisakadefense.com/products/qd-mount-keymod
http://cdn.shopify.com/s/files/1/0659/4513/products/IMG_8250_a3a471f7-4017-464f-85e7-733d2957a5c6_large.JPG?v=1467393053
http://cdn.shopify.com/s/files/1/0659/4513/products/eUrilUpgTWRoIOb3UoPH2ufXmwgk_aHzt0w3ilhgJJA_large. jpg?v=1467393053
http://cdn.shopify.com/s/files/1/0659/4513/products/nWb5_KUHdpGKSWbfjVpZUVCoOas1PoDdl060mh9HFQw_large. jpg?v=1467393053
The other new products are low profile Picatinny rail sections for KeyMod and M-Lok. These are 5 slots long and use three screws for maximum strength, spreading the stress of high torque accessories like bipods or vertical grips over more slots on your rail. The reduced height pulls Picatinny accessories a little closer, too.
KeyMod: http://arisakadefense.com/products/low-profile-picatinny-rail-keymod
M-Lok: http://arisakadefense.com/products/low-profile-picatinny-rail-m-lok
http://cdn.shopify.com/s/files/1/0659/4513/products/Arisaka_Pic-LP2_b2570251-4990-426e-a2a3-0840c8f0f639_large.JPG?v=1467214773
http://cdn.shopify.com/s/files/1/0659/4513/products/Arisaka_Pic-LP6_large.JPG?v=1467214773
Comparison to normal Picatinny rail section:
http://cdn.shopify.com/s/files/1/0659/4513/products/Arisaka_Pic-LP0_large.JPG?v=1467214773
Looking nice!
Sent from my SM-N910V using Tapatalk
Slippers
1 July 2016, 13:13
Weird, UPS came twice today. Tailcaps are in from anodizing. 300 series complete lights are available again. :)
http://arisakadefense.com/products/300-series-light
K1tt3n5
1 July 2016, 19:56
Your new low profile picatinny mounts look incredible!!
alamo5000
1 July 2016, 20:01
Been wanting a light for ages. Finally placed an order tonight [:D]
alamo5000
5 July 2016, 17:07
Got my 300 series light today with the 45 degree M-Lok offset mount.
My only question is WHY in the hell did I not get one of these sooner? [:D]
Seriously. That thing is bad ass. And after some tinkering around I got the mount in the exactly most perfect position, or at least what I think is so. Holy crap man, that thing is great. It's tight in up to the rail, has options for slight adjustments on mounting...
I use a VFG so I can still keep tension on the rifle and have my thumb free to flicker the light as I need to.
I am seriously going to take that thing out at night and see what it is like in the complete dark. What I also might do is sit in the dark and wait for a piggy to come by and wait for the flash. [:D]
Man I have to hand it to Slippers. This is one of the coolest things I've bought in a very long time. [adore]
https://c4.staticflickr.com/8/7313/28171989915_164d4c0f3b_b.jpg (https://flic.kr/p/JVsP74)
Arisaka (https://flic.kr/p/JVsP74) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Joelski
8 July 2016, 21:47
Will, I have a challenge for you. As far as I know, this hasn't been done yet. Make a WML remote switch with an aluminum body/base and give it M-Lok and KeyMod attachment, a 5"-7" straight wire and sit back and watch them sell like mothers. [:)]
Will, I have a challenge for you. As far as I know, this hasn't been done yet. Make a WML remote switch with an aluminum body/base and give it M-Lok and KeyMod attachment, a 5"-7" straight wire and sit back and watch them sell like mothers. [:)]
Hmmm!!!
Sent from my SM-N910V using Tapatalk
Joelski
9 July 2016, 08:05
IKR!?! I want two to start with!
UWone77
10 July 2016, 00:48
Will, I have a challenge for you. As far as I know, this hasn't been done yet. Make a WML remote switch with an aluminum body/base and give it M-Lok and KeyMod attachment, a 5"-7" straight wire and sit back and watch them sell like mothers. [:)]
I had this discussion with Slippers earlier in the day. Likely cost prohibitive. But I like the way you think Joel!
n4p226r
17 July 2016, 03:34
Does Arisaka make anything that would mount a m300 on a picatinny at 9 o'clock but the scout would sit in the same position as their offset keymod at 10:30? I know the other vendor makes something but the awesomeness of my keymod mount makes me want to look here first
Slippers
29 July 2016, 12:34
We are now a Surefire authorized dealer, so you can select the standard and SR07 tape switches (and socketed tailcap) on our 300 and 600 series lights. If you compare the cost of a light plus buying the tailcap/remote switch separately, I think you'll be pretty happy with the pricing we offer.
Additionally, we are stocking the Surefire M300V and M600V White/IR Scout lights, which come with a free Arisaka Scout mount of your choice. These are the newest models that bumped up the output, with 250 white/100mW IR on the M300V and 350 white/120mW IR on the M600V.
Standalone momentary tailcaps and 300/600 series lights with momentary tailcaps should be available again on the site later today, and Streamlight Protac Rail Mount combos are shipping.
Dstrbdmedic167
29 July 2016, 15:37
Nice!
Sent from my iPhone using Tapatalk
Stickman
15 August 2016, 20:16
https://c8.staticflickr.com/9/8827/28892679871_47bb1cd9cf_b.jpg (https://flic.kr/p/L29x7X)Stickman (https://flic.kr/p/L29x7X) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
Pyzik
15 August 2016, 20:24
Will, that is awesome
Sent from my SM-N910V using Tapatalk
Stickman
29 August 2016, 10:11
https://c1.staticflickr.com/9/8667/28350142744_f428f45909_b.jpg (https://flic.kr/p/KccTJy)Stickman (https://flic.kr/p/KccTJy) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
Pyzik
29 August 2016, 10:35
https://c1.staticflickr.com/9/8667/28350142744_f428f45909_b.jpg (https://flic.kr/p/KccTJy)Stickman (https://flic.kr/p/KccTJy) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
Now that is purdy.
is that the LAW folder? Hinge looks large in this shot.
Pyzik
6 October 2016, 16:22
https://c7.staticflickr.com/9/8548/30125307926_4ae9dbf8db_b.jpg (https://flic.kr/p/MU55uN)
Arisaka CMT (https://flic.kr/p/MU55uN) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
UWone77
8 October 2016, 09:21
1801
Pyzik
8 October 2016, 09:23
1801
Pink!
The light looks good. Much better than the stock mount!
GilmaSusan
9 October 2016, 10:51
https://c1.staticflickr.com/9/8667/28350142744_f428f45909_b.jpg (https://flic.kr/p/KccTJy)Stickman (https://flic.kr/p/KccTJy) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
Nice pict, Thank you friends
I get a lot of information in this group
keep good posting & excellent pict :)
http://elincaso.top/8/b.png
Pyzik
9 October 2016, 11:06
Nice pict, Thank you friends
I get a lot of information in this group
keep good posting & excellent pict :)
http://elincaso.top/8/b.png
He's baaaaaack
Sent from my SM-N910V using Tapatalk
UWone77
9 October 2016, 11:23
He's baaaaaack
Sent from my SM-N910V using Tapatalk
He got away with just 1 post this time. [pop]
Pyzik
14 October 2016, 10:05
Hmm... Not sure this works for me, but it's cool to use MLOK on the top rail.
https://c8.staticflickr.com/9/8416/30236457831_3396947f61_b.jpg (https://flic.kr/p/N4TKut)
MLOK Top Rail (https://flic.kr/p/N4TKut) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Joelski
14 October 2016, 12:52
Will: I'm looking at a Noveske K9 barricade/hand stop. Are you considering developing anything similar for 1913? I'd like to keep my business "in the yard" if I can. I'm not holding my breath, but there are a lot of those rails out there and plenty of guys that won't change their M4's and SR's.
Slippers
14 October 2016, 14:11
We have a picatinny finger stop coming, but it won't have the sharp side like the K9, if that's what you need.
JGifford
14 October 2016, 15:55
Pink!
The light looks good. Much better than the stock mount!
i bet it works better, too. My stock mount had some dimensional issue or something. I had to SMASH it onto the rail and PRY it off. This is with the screw fully backed off. This has NOT been my experience when I buy Arisaka parts, needless to say, lol!
UWone77
21 October 2016, 20:14
1871
Joelski
22 October 2016, 03:06
We have a picatinny finger stop coming, but it won't have the sharp side like the K9, if that's what you need.
Nah, just want to change from the Magpul plastic one I have atm. I try to keep business as local as I can. I'll keep an eye peeled for the announcement.
UWone77
26 October 2016, 17:42
1893
1894
fledge
26 October 2016, 19:30
1893
1894
First I have seen this. Quad version of the finger stop?
UWone77
26 October 2016, 19:41
First I have seen this. Quad version of the finger stop?
Yes. Slippers had some protypes made up. I think he's just refining the dimensions and they should be out soon.
Dstrbdmedic167
26 October 2016, 20:02
I don't have a quad rail but they are nice as is everythign Will designs. Makes me want a quad rail lol
Pyzik
26 October 2016, 20:07
I don't have a quad rail but they are nice as is everythign Will designs. Makes me want a quad rail lol
Is it the part making you want one or all Uwone's pics of them?... lol.
The new stop looks good.
Sent from my SM-N910V using Tapatalk
Dstrbdmedic167
26 October 2016, 20:08
Is it part making you want one or all Uwone's pics of them?... lol.
The new stop looks good.
Sent from my SM-N910V using Tapatalk
The one i'm holding is what makes me want one...
UW's pics too lol
SINNER
26 October 2016, 20:16
I need a few of those finger stops.
Joelski
3 November 2016, 14:05
Will,
Any chance to buy a Surefire light with the tapeswitch? It's an option for other lights, but mounts are the only options showing for the SF lights. Also, any ETA on the picatinny hand stops?
Loving the Scout mount for my streamlight torch. That thing is in that 45 degree course of M-Lok tighter than a West Virginian 2nd grader! [:D]
Thanks,
Joel
http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20161027_201941-1.jpg~original
Slippers
3 November 2016, 16:03
Will,
Any chance to buy a Surefire light with the tapeswitch? It's an option for other lights, but mounts are the only options showing for the SF lights. Also, any ETA on the picatinny hand stops?
Loving the Scout mount for my streamlight torch. That thing is in that 45 degree course of M-Lok tighter than a West Virginian 2nd grader! [:D]
Thanks,
Joel
http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20161027_201941-1.jpg~original
It's a limitation of our shopping cart setup that prevents me from adding more options, as it won't let me share the base item (in this case the M300C) between all the variants at the same time. Instead, if I have 5 lights in stock and 5 variants to choose from, that means only one of each is available on the site (or some combination that totals 5 lights). Allowing someone to choose the UE+ST07 or UE+SR07 remote switches means 15+ variants, so I would need 15 lights to offer one of each variant for sale.
Anyway, if you want a remote switch and a surefire light that we have in stock send me an email and I can put together a quote for you and do an online invoice.
We are a few weeks out on the Picatinny finger stops. We're still tuning the fit tolerances, but they should be in full production next week.
Dstrbdmedic167
3 November 2016, 16:56
1976
Dstrbdmedic167
3 November 2016, 17:15
Here is some shots put together of the new Picatinny fingerstop for anyone interested. Now I need a quad rail!
1977
Joelski
3 November 2016, 17:30
It's a limitation of our shopping cart setup that prevents me from adding more options, as it won't let me share the base item (in this case the M300C) between all the variants at the same time. Instead, if I have 5 lights in stock and 5 variants to choose from, that means only one of each is available on the site (or some combination that totals 5 lights). Allowing someone to choose the UE+ST07 or UE+SR07 remote switches means 15+ variants, so I would need 15 lights to offer one of each variant for sale.
Anyway, if you want a remote switch and a surefire light that we have in stock send me an email and I can put together a quote for you and do an online invoice.
We are a few weeks out on the Picatinny finger stops. We're still tuning the fit tolerances, but they should be in full production next week.
Thanks for the info, I'll probably jump on it when the fingerstops drop.
UWone77
16 November 2016, 15:50
2096
UWone77
21 November 2016, 23:52
2133
UWone77
26 November 2016, 20:36
2172
Pyzik
1 December 2016, 07:13
https://c3.staticflickr.com/6/5591/31318616026_bcef2742f2_b.jpg (https://flic.kr/p/PHw6qo)
DSC_0209 (https://flic.kr/p/PHw6qo) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Dstrbdmedic167
22 December 2016, 16:09
2400
Joelski
31 December 2016, 15:24
http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20161231_180658_zpsxqejmhdd.jpg (http://s997.photobucket.com/user/Joelski144/media/ARs%20and%20Pistols/MK%2018/20161231_180658_zpsxqejmhdd.jpg.html)
Slippers
31 December 2016, 17:15
http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20161231_180658_zpsxqejmhdd.jpg (http://s997.photobucket.com/user/Joelski144/media/ARs%20and%20Pistols/MK%2018/20161231_180658_zpsxqejmhdd.jpg.html)
Lots of Arisaka there. Thank you! Hope you like the new Picatinny finger stop.
tact
31 December 2016, 17:20
Any info on when you'll be restocking the store?
Slippers
31 December 2016, 18:45
Any info on when you'll be restocking the store?
What are you looking for? 300/600 series lights and bodies are a few weeks out. Otherwise most everything else is in stock.
tact
31 December 2016, 18:46
Thanks....
Joelski
31 December 2016, 18:56
Lots of Arisaka there. Thank you! Hope you like the new Picatinny finger stop.
Front end is an Arisaka showcase. Forward Controls has the midship. BTW the Tac Pro light clears backwards mounting without any issues. Still gonna get a SF for it because, SureFire.
Slippers
12 January 2017, 17:08
Our new Finger Stops for Picatinny are available, along with new variations of the Inline Scout Mount for legacy Troy/VTAC Alpha handguards.
The Finger Stop for Picatinny has a new profile, and works well as a rear hand stop in addition to the front index point that easily slips between your fingers. It's secured with two nylon tipped set screws.
http://arisakadefense.com/products/finger-stop-picatinny
http://i.imgur.com/Dy7tE97l.jpg
http://i.imgur.com/syLjMi4l.jpg
http://i.imgur.com/8rC1k5ql.jpg
The Inline Scout Mounts for Troy/VTAC Alpha handguards have specific recoil lugs to each style of handguard and use a similar backing plate, much like the OEM supplied modular rails. Like our KeyMod and M-Lok versions, they allow you to shift the light outwards for more clearance, and work great on the top 45 degree positions on either side of the 12 o'clock rail.
http://arisakadefense.com/products/inline-scout-mount-troy-vtac-alpha
http://i.imgur.com/hJhKk0bl.jpg
http://i.imgur.com/dGO8qN1l.jpg
http://i.imgur.com/8zkzKDMl.jpg
http://i.imgur.com/YUyBGeIl.jpg
http://i.imgur.com/5ZhblMxl.jpg
Photos courtesy of Dstrbdmedic167, UWone77, and USMC03.
Dstrbdmedic167
14 January 2017, 18:35
2536
Axlnut
14 January 2017, 19:57
I love that finger stop!
I'll be joining the 300 club soon enough, and I'm stoked since mine will be pretty special. Hopefully Will has something cool to offer everyone else too - but he's going to have to tell you about that when he's ready ;-)
UWone77
17 January 2017, 18:54
2568
Pyzik
19 January 2017, 09:24
https://c1.staticflickr.com/1/431/32027362760_8523fd159a_b.jpg (https://flic.kr/p/QN9B8E)
Arisaka (https://flic.kr/p/QN9B8E) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
UWone77
20 January 2017, 18:51
Arisaka IR compatible Scout bodies is now a thing...
2589
2590
Slippers
4 February 2017, 16:30
The new IR compatible bodies are available on the site, and will be making their way out to dealers. We've been out of stock for so long that they should all be the new type if you purchase from a dealer.
We also have some 3 slot pic rails available for KeyMod and M-Lok, if you don't need the extra strength of the 5 slot design. They're still just as low profile as the 5 slot rails, of course.
http://i.imgur.com/Herk3gz.jpg
http://i.imgur.com/dnZIUuH.jpg
http://i.imgur.com/zmifOkW.jpg
Tyrannosaur
4 February 2017, 17:56
Slippers, which Surefire scout mount works with LWRCI for ends? Been meaning to ask
Slippers
4 February 2017, 18:35
Slippers, which Surefire scout mount works with LWRCI for ends? Been meaning to ask
Nothing that we make fits the lwrc spacing/thread.
schambers
4 February 2017, 20:18
Slippers, which Surefire scout mount works with LWRCI for ends? Been meaning to ask
Sent you a message about a scout light mount for LWRC
Stickman
7 February 2017, 02:38
https://c1.staticflickr.com/1/322/32289478711_3b874167c7_b.jpg (https://flic.kr/p/Rcj25c)Stickman (https://flic.kr/p/Rcj25c) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
Slippers
7 February 2017, 19:11
A new offering: Surefire KM1-C white/IR head combined with our 300 Series Light Body and your choice of Arisaka Momentary tailcap or Surefire Z68 clicky tailcap. These will be available in limited batches and are priced very aggressively compared to the M300V, and then you also get the benefit of having one of our streamlined light bodies.
http://arisakadefense.com/products/300-series-ir-light
http://i.imgur.com/ZumNeHg.jpg
http://i.imgur.com/JpvuJ73.jpg
http://i.imgur.com/mbqa2Lo.jpg
http://i.imgur.com/mW2Ewla.jpg
phey_05
10 February 2017, 20:21
Sir Will, @Slippers , Im on the final stage of placing my order, can you please confirm that the OFFSET SCOUT MOUNT is fully compatible with bootleg hanguard?
The handguard lookslike it is has a right angle?
2732
https://bootleginc.com/product/bootleg-handguard/
Also, im contemplating about the modularity of the INLINE SCOUT MOUNT, do you have a picture comparison of the inline and offset?
BR,
Chris
Slippers
10 February 2017, 20:58
Sir Will, @Slippers , Im on the final stage of placing my order, can you please confirm that the OFFSET SCOUT MOUNT is fully compatible with bootleg hanguard?
The handguard lookslike it is has a right angle?
2732
https://bootleginc.com/product/bootleg-handguard/
Also, im contemplating about the modularity of the INLINE SCOUT MOUNT, do you have a picture comparison of the inline and offset?
BR,
Chris
Sorry, I don't have a bootleg handguard so I don't know for sure. The offset should be fine, but it's impossible to know without having it here in my hands.
What kind of comparison are you looking for with the inline vs offset?
phey_05
11 February 2017, 03:13
Thanks for the reply Sir!
I figured that the inline mount will achieve the mounting that i want, a lot closert to the top rail.
So it will be slr ion hybrid handguard and inline mount.
Slippers
11 February 2017, 03:51
Thanks for the reply Sir!
I figured that the inline mount will achieve the mounting that i want, a lot closert to the top rail.
So it will be slr ion hybrid handguard and inline mount.
Yes, on handguards with 45 degree slots the inline will pull the light in closer.
phey_05
11 February 2017, 05:01
Excellent, thanks Sir!
I sent you a PM, please check.
Slippers
11 February 2017, 05:17
Excellent, thanks Sir!
I sent you a PM, please check.
The forum discount code is "wevo" :)
phey_05
11 February 2017, 05:39
The forum discount code is "wevo" :)
Thanks Sir, order placed. :)
Stickman
15 February 2017, 23:37
https://c1.staticflickr.com/1/555/32289478961_75879a3f7d_b.jpg (https://flic.kr/p/Rcj29v)Stickman (https://flic.kr/p/Rcj29v) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
Stickman
21 February 2017, 03:12
https://c1.staticflickr.com/1/662/32289479971_487139cf69_b.jpg (https://flic.kr/p/Rcj2rV)Stickman (https://flic.kr/p/Rcj2rV) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
Joelski
21 February 2017, 03:31
^^^ What is that on the rail's 6 o'clock? A new barrier device? Pic mount wonder bar? A cow catcher for bad guys??? Inquiring minds! [:D]
Pyzik
21 February 2017, 04:12
^^^ What is that on the rail's 6 o'clock? A new barrier device? Pic mount wonder bar? A cow catcher for bad guys??? Inquiring minds! [:D]
I noticed it too on the last one and was wondering what kind of barrier thingamajig it was.
SINNER
21 February 2017, 08:27
^^^ What is that on the rail's 6 o'clock? A new barrier device? Pic mount wonder bar? A cow catcher for bad guys??? Inquiring minds! [:D]
FANG stabilizer.
voodoo_man
21 February 2017, 08:39
https://c1.staticflickr.com/1/555/32289478961_75879a3f7d_b.jpg (https://flic.kr/p/Rcj29v)Stickman (https://flic.kr/p/Rcj29v) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
http://ct.fra.bz/ol/fz/sw/i62/2/2/21/frabz-I-should-get-a-blue-light-bulb-a38433.jpg
Pyzik
21 February 2017, 08:41
http://ct.fra.bz/ol/fz/sw/i62/2/2/21/frabz-I-should-get-a-blue-light-bulb-a38433.jpg
Hahahaha, I was just sitting here thinking "I need colors". 😂
Sent from my SM-G930V using Tapatalk
voodoo_man
21 February 2017, 08:58
Hahahaha, I was just sitting here thinking "I need colors".
Sent from my SM-G930V using Tapatalk
I have several actually but they are outside my house and on at night as to let the would be criminals know that, like Han Solo, I shoot first.
UWone77
23 February 2017, 02:11
2786
Stickman
24 February 2017, 03:41
https://c1.staticflickr.com/1/554/31598512343_02817765be_b.jpg (https://flic.kr/p/Q9fCQX)Stickman (https://flic.kr/p/Q9fCQX) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
Dstrbdmedic167
28 February 2017, 17:59
https://uploads.tapatalk-cdn.com/20170301/1c5940112d2d0c9ebbc6f0c3b69757e6.jpg
UWone77
4 March 2017, 18:52
2830
Evintos
8 March 2017, 12:09
Any plans for a slim body Streamlight Protac body? Is it possible to make a tail cap for the Protac that uses Surefire remote tape switches?
Slippers
8 March 2017, 12:14
Any plans for a slim body Streamlight Protac body? Is it possible to make a tail cap for the Protac that uses Surefire remote tape switches?
For the cost of those lights, it's easier to just grind off the offending part of the lugs if you have fit issues. Selling a $60-70 body for a $100 light doesn't really go over well.
Evintos
8 March 2017, 12:42
For the cost of those lights, it's easier to just grind off the offending part of the lugs if you have fit issues. Selling a $60-70 body for a $100 light doesn't really go over well.
Aw.. worth a shot. How about the tail cap idea?
Slippers
8 March 2017, 14:18
Aw.. worth a shot. How about the tail cap idea?
Their socket is proprietary, as far as I know. It would not be cost effective to duplicate it. Perhaps an adapter could be made that goes between a UE tailcap and the streamlight. But again, you'd be looking at spending more than the light costs in order to use Surefire remote switches. I guess that might be worth it to some people?
Evintos
8 March 2017, 15:31
Perhaps an adapter could be made that goes between a UE tailcap and the streamlight. But again, you'd be looking at spending more than the light costs in order to use Surefire remote switches. I guess that might be worth it to some people?
Ouch... :( Was hoping something like this could be done for $60-80 retail at most. Oh well, thanks for letting me know.
Slippers
8 March 2017, 18:22
Ouch... :( Was hoping something like this could be done for $60-80 retail at most. Oh well, thanks for letting me know.
I could have worded that better. An adapter might be $20. Then add a UE tailcap and SR07 switch for $115.
Honest question: are you willing to spend that much on the entire setup?
Evintos
8 March 2017, 19:08
I could have worded that better. An adapter might be $20. Then add a UE tailcap and SR07 switch for $115.
Honest question: are you willing to spend that much on the entire setup?
I was interested in purchasing just 1 adapter for at most $80, but if the adapter is $20-30, I'd buy 3-4 immediately. If it can be done, cash, credit, check, money order, whichever is preferred, I'll send it ASAP.
My plan is/was Protac Rail Mount HL-X, UE Tail cap, TNVC/Unity Tactical TAPS
The dual fuel capability of the Protac HL-X is what I'm primarily drawn to (the lumen and candela output is a bonus). It's unfortunate that Streamlight had the foresight to go with the Scout body/mounting system but went with their proprietary thread for the tailcap.
Slippers
9 March 2017, 18:28
I was interested in purchasing just 1 adapter for at most $80, but if the adapter is $20-30, I'd buy 3-4 immediately. If it can be done, cash, credit, check, money order, whichever is preferred, I'll send it ASAP.
My plan is/was Protac Rail Mount HL-X, UE Tail cap, TNVC/Unity Tactical TAPS
The dual fuel capability of the Protac HL-X is what I'm primarily drawn to (the lumen and candela output is a bonus). It's unfortunate that Streamlight had the foresight to go with the Scout body/mounting system but went with their proprietary thread for the tailcap.
I drew out a few concepts today and it looks like it will be possible, and shouldn't be very expensive. I don't have an ETA at this point, of course, but we're going forward with the adapter. [:D]
Evintos
9 March 2017, 21:34
I drew out a few concepts today and it looks like it will be possible, and shouldn't be very expensive. I don't have an ETA at this point, of course, but we're going forward with the adapter. [:D]
[adore] I am so excited. Thank you so much!!
gatordev
11 March 2017, 14:07
Limited rail space but need accoutrements? No problem! Thanks, Will! (sorry for the iPhone photo, but I was lazy after beating on the bipod feet pins...forever)
https://c1.staticflickr.com/4/3866/33383770555_ec683158a0_b.jpg
UWone77
11 March 2017, 14:11
Nice background!
gatordev
11 March 2017, 14:17
I failed to twist the inset badge clockwise 100 degrees. -5 points.
Dstrbdmedic167
14 March 2017, 10:43
Get em while they're hot!
2890
2891
2892
Axlnut
14 March 2017, 15:41
Get em while they're hot!
2890
2891
2892
Stoked about these! I only got to see them nekkid, look great with the laser work done!
fledge
14 March 2017, 19:27
There's the pics!
Mine is waiting to go on a build Axlnut is painting, if he can make it to the post office in the snowstorm.
Axlnut
14 March 2017, 20:29
There's the pics!
Mine is waiting to go on a build Axlnut is painting, if he can make it to the post office in the snowstorm.
I was all prepped to go, and they closed the entire areas POs. Bastages.
Pyzik
14 March 2017, 20:34
Not a fancy tan one but....
https://uploads.tapatalk-cdn.com/20170315/50ce3fd0db86fdfafd3189a771e78395.jpg
Sent from my SM-G930V using Tapatalk
velocity2006
15 March 2017, 15:57
I broke my inline ring mount :(
Dstrbdmedic167
15 March 2017, 16:30
I broke my inline ring mount :(
How'd you manage that?
Sent from my iPhone using Tapatalk
velocity2006
17 March 2017, 07:30
Dropped the rifle on the light, it was on the 300BO Rainier wevo build and I had it mounted too far out. Will is going to take care of it so all is good, but definitely shouldn't be cantilevering these off the end of the rail like I had it. I'll have to run it about an inch further back which will change my grip a bit, but oh well.
Dstrbdmedic167
17 March 2017, 07:39
Dropped the rifle on the light, it was on the 300BO Rainier wevo build and I had it mounted too far out. Will is going to take care of it so all is good, but definitely shouldn't be cantilevering these off the end of the rail like I had it. I'll have to run it about an inch further back which will change my grip a bit, but oh well.
Derp.. glad will is taking care of you. He's good for that.
Sent from my iPhone using Tapatalk
Perfect solution.....Just add a suppressor .....then cantilever off the end won't matter.
https://uploads.tapatalk-cdn.com/20170317/e1a09a3dfb8e45a179bdb0cf82a033a7.jpg
velocity2006
17 March 2017, 12:32
Yeah that mount has two places that the light attaches to the mlock mount. The ring mount only has one. I don't think a suppressor would have made a difference. Cantilevering the mount there must not have been enough support with the one attachment point being that it was over the rail. So, when the light hit the surface of the ground, the attachment point acted as the pivot point for all of the force, if that makes sense. Because it was cantilevered and not fully supported the mount slightly bent and fractured. For sure it was my fault by not mounting it properly, but great of Will to take care of it anyway.
I need to get my ass to the post office and send it off here soon. Been swamped.
My ring mount was mounted basically the same way. You have yours in that picture.
Joelski
17 March 2017, 14:20
Dropped the rifle on the light, it was on the 300BO Rainier wevo build and I had it mounted too far out. Will is going to take care of it so all is good, but definitely shouldn't be cantilevering these off the end of the rail like I had it. I'll have to run it about an inch further back which will change my grip a bit, but oh well.
Screw barrel shadow! This isn't SEAL Team 6. I also don't like it sitting in my line of sight (right-handed shooter).
http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20161027_201323-1.jpg~original
Slippers
17 March 2017, 17:35
Regarding cantilevering: I don't recommend it. Tact's rifle is as far as I would go with the inline scout mount. The inline ring mount should have the ring still over the handguard.
Inventory update: Offset Scout Mounts are back in stock, finally.
KeyMod: https://arisakadefense.com/products/offset-scout-mount-keymod
M-Lok: https://arisakadefense.com/products/offset-scout-mount-m-lok
We also have a limited run of 300 Series Lights coated in Magpul FDE Cerakote. These were hard coat anodized first, and include your choice of a matching Arisaka momentary or Surefire Z68 tailcap. These lights feature our streamlined light bodies which are compatible with any aftermarket Scout mount, head, or tailcap. The Malkoff E1T TIR head provides 300 lumens and 9,000 lux.
https://arisakadefense.com/products/300-series-light
http://i.imgur.com/BtSqoJql.jpg
Malkoff has provided us with two new head configurations for the 600 Series Lights:
E2ST (Super Throw) - 20,000 lux at 1 meter and 650 initial/550 continuous out-the-front lumens. This head has a very focused beam for maximum distance.
E2S (Super) - 12,000 lux at 1 meter and 750 initial/700 continuous out-the-front lumens. This head has a wider beam profile, giving more spill.
These heads pull a lot of power, and the battery life reflects this: continuous run time is 15-20 minutes on 2x CR123 cells or 45-60 minutes on 1x 16650 cell. Real world use where the light is turned on and off in spurts will result in closer to 30-45 minutes run time with 2x CR123 cells.
https://arisakadefense.com/products/600-series-light
http://i.imgur.com/QHP1bIrl.jpg
UWone77
24 March 2017, 12:15
3001
UWone77
25 March 2017, 12:14
3001
Everytime I see this particular setup, I think Will/Arisaka should make the part holding the switch out of aluminum.... just saying. [:D]
UWone77
28 March 2017, 17:41
The new E2S Head
3020
UWone77
30 March 2017, 17:58
3034
Dstrbdmedic167
31 March 2017, 12:40
https://uploads.tapatalk-cdn.com/20170331/efa48e8e7dc1638d3542870be69191c4.jpg
UWone77
6 April 2017, 16:36
3083
UWone77
7 April 2017, 14:41
3088
UWone77
13 April 2017, 00:36
3126
UWone77
14 April 2017, 04:02
As soon as my tailcap gets here, the Arisaka FDE Light will be done.
3134
UWone77
23 April 2017, 14:06
3199
UWone77
14 May 2017, 16:20
3348
UWone77
15 May 2017, 15:55
3356
Killing this thread. Some real nice shots UW
UWone77
16 May 2017, 18:33
Killing this thread. Some real nice shots UW
Well thank you sir.
3361
Dstrbdmedic167
22 May 2017, 12:33
https://uploads.tapatalk-cdn.com/20170522/7598f228d0670f613b43bcf628363901.jpg
Sent from my iPhone using Tapatalk
Joelski
22 May 2017, 13:56
I'm assuming you approve of the switch holder.
3199
Dstrbdmedic167
22 May 2017, 14:13
I'm assuming you approve of the switch holder.
Yea I love the low profile rail sections!
UWone77
1 June 2017, 00:09
I'm assuming you approve of the switch holder.
I like them, but not sure they are worth $60, since scout lights no longer come with UE07's which cost another $90. If you have some older scout lights that still have the UE07's included it might be worthwhile.
UWone77
3 June 2017, 11:04
3556
3557
https://uploads.tapatalk-cdn.com/20170604/95b67cca143b32016c4145f0b82d6577.jpg
UWone77
6 June 2017, 04:04
3582
I think I'm going to try a pressure switch.
https://c1.staticflickr.com/5/4235/35003424541_1cff5b5054_b.jpg (https://flic.kr/p/Vk8GBF)
Arisaka (https://flic.kr/p/Vk8GBF) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
UWone77
10 June 2017, 12:06
3624
UWone77
11 June 2017, 20:12
3632
mustangfreek
20 June 2017, 02:05
^^ I like that whole setup ....:P
Was bored and playing around
http://i194.photobucket.com/albums/z176/mustang91_2007/gun/A43D3450-84C6-49F2-9852-E0B208F82DAB_zpsjlu2upvr.jpg (http://s194.photobucket.com/user/mustang91_2007/media/gun/A43D3450-84C6-49F2-9852-E0B208F82DAB_zpsjlu2upvr.jpg.html)
UWone77
20 June 2017, 19:49
3700
UWone77
25 June 2017, 10:58
300 Series Arisaka body with a Surefire Vampire Head
3727
300 Series Arisaka body with a Surefire Vampire Head
3727
Damn that looks good
Sent from my SM-G930V using Tapatalk
Dstrbdmedic167
15 July 2017, 20:04
3863
FortTom
16 July 2017, 12:57
I'm wondering if they're ever going to offer their Harris Bi Pod low profile mount kit in QD. I have one, mounted to a section of their low profile rail, along with a
Pod Lock, and it is great on my LR-10. Would be a world of difference it was QD.
UWone77
17 July 2017, 12:52
I'm wondering if they're ever going to offer their Harris Bi Pod low profile mount kit in QD. I have one, mounted to a section of their low profile rail, along with a
Pod Lock, and it is great on my LR-10. Would be a world of difference it was QD.
Slippers can correct me if I'm wrong, but I don't believe anything QD is coming down the pipe anytime soon.
Slippers
17 July 2017, 13:25
I'm wondering if they're ever going to offer their Harris Bi Pod low profile mount kit in QD. I have one, mounted to a section of their low profile rail, along with a
Pod Lock, and it is great on my LR-10. Would be a world of difference it was QD.
Slippers can correct me if I'm wrong, but I don't believe anything QD is coming down the pipe anytime soon.
It's something I want to do, and have drawn up, but we're extremely backed up on production right now. Not much time for new stuff. :(
UWone77
23 July 2017, 04:06
3904
UWone77
14 August 2017, 20:28
4017
UWone77
17 August 2017, 04:04
4032
Aragorn
17 August 2017, 12:27
3632
Is that an Arisaka tape switch mount? Couldn't find it on their site.
velocity2006
17 August 2017, 12:47
Looks like a Surefire switch in a Magpul mount.
UWone77
17 August 2017, 13:32
Is that an Arisaka tape switch mount? Couldn't find it on their site.
That's a $15 Magpul switch mount like velocity pointed out.
Slippers
23 August 2017, 13:56
After a long wait which involved Malkoff changing how the heads are machined, we have 300 series lights back in stock. Black is available now, with FDE Cerakote in early September. 600 series lights are going to be a bit longer.
300 Series Light with Malkoff E1T head: https://arisakadefense.com/products/300-series-light
300 Series Light with Surefire KM1-C IR/White head: https://arisakadefense.com/products/300-series-ir-light
Malkoff E1T head by itself: https://arisakadefense.com/products/malkoff-scout-light-head
We have also finished a variant of our Offset Scout Mount for the MCX and Virtus. It has special recoil lugs that fit the vent holes above the KeyMod/M-Lok slots, placing the mount at the top corner of the OEM handguards. A backer plate is used to secure it. These also have a relief cut along the bottom for the raised M-Lok surface on the Virtus handguard, so the mount will sit flush without any issues.
https://arisakadefense.com/products/offset-scout-mount-mcx
http://i.imgur.com/Kxu4inW.jpg
http://i.imgur.com/JSx0UzV.jpg
UWone77
26 August 2017, 10:50
4081
UWone77
27 August 2017, 13:55
4095
UWone77
28 August 2017, 20:42
4116
UWone77
30 August 2017, 04:01
4127
Pyzik
30 August 2017, 05:09
4127
So hot.
UWone77
3 September 2017, 15:01
4159
UWone77
7 September 2017, 20:52
4180
Pyzik
8 September 2017, 05:41
https://farm5.staticflickr.com/4429/36218706734_417b9ef6b1_c.jpg (https://flic.kr/p/XbwkEW)
Arisaka (https://flic.kr/p/XbwkEW) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
alamo5000
8 September 2017, 17:28
https://c1.staticflickr.com/5/4373/36923636786_3c5eaea9c5_b.jpg
alamo5000
8 September 2017, 22:10
https://c1.staticflickr.com/5/4394/36302537503_c7a0bd317d_b.jpg
UWone77
15 September 2017, 20:47
4241
Pyzik
19 September 2017, 14:53
https://farm5.staticflickr.com/4404/37190343741_c21191aeed_c.jpg (https://flic.kr/p/YEoev8)
Arisaka (https://flic.kr/p/YEoev8) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Pyzik
21 September 2017, 08:17
https://farm5.staticflickr.com/4377/37333707415_89db4afe67_c.jpg (https://flic.kr/p/YT41wB)
Arisaka (https://flic.kr/p/YT41wB) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Dstrbdmedic167
22 September 2017, 11:48
https://uploads.tapatalk-cdn.com/20170922/cc1b9a8c00d0724b0e56b4382e6eae10.jpg
Pyzik
3 October 2017, 10:07
https://farm5.staticflickr.com/4456/36767561024_c011115b1a_c.jpg (https://flic.kr/p/Y22mVW)
Arisaka Keymod Inline (https://flic.kr/p/Y22mVW) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Dstrbdmedic167
11 October 2017, 19:17
Anyone up for the new Arisaka Mossie Mount?
4378
Pyzik
11 October 2017, 19:19
Anyone up for the new Arisaka Mossie Mount?
4378Looks great
Sent from my SM-G930V using Tapatalk
UWone77
11 October 2017, 19:22
What's old is new again.
Pyzik
23 October 2017, 06:24
https://farm5.staticflickr.com/4484/37622694200_e28bb93bdb_c.jpg (https://flic.kr/p/ZjA9eo)
Arisaka (https://flic.kr/p/ZjA9eo) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
mustangfreek
24 October 2017, 01:24
Nice..need a thumbs up symbol or like button..lol
I do need to get one of the offset mounts for the protac rail mount light I just found in the parts box..
Pyzik
24 October 2017, 06:09
Nice..need a thumbs up symbol or like button..lol
I do need to get one of the offset mounts for the protac rail mount light I just found in the parts box..We had a "like" button here for a minute.
Sent from my SM-G930V using Tapatalk
UWone77
27 October 2017, 21:22
4448
UWone77
4 November 2017, 15:30
4493
UWone77
6 November 2017, 23:51
4506
UWone77
7 November 2017, 23:16
4512
UWone77
12 November 2017, 04:05
4527
mustangfreek
13 November 2017, 02:35
How long till some more offset m lok scout mounts are ready? FDE option ?
Slippers
13 November 2017, 04:15
How long till some more offset m lok scout mounts are ready? FDE option ?
Available now in black.
mustangfreek
13 November 2017, 12:23
Available now in black.
Crap..they were OOS it said over the weekend when I was snooping..
Thanks
fledge
13 November 2017, 13:05
Slippers, any reasoning why your QD mounts and hardware are bigger now?
Slippers
13 November 2017, 14:22
Slippers, any reasoning why your QD mounts and hardware are bigger now?
I redesigned the QD from scratch, making it stronger in several spots (not that we've ever had one fail, but I'm OCD). It also let me change to better hardware. You'd be surprised how many people manage to strip out the 3/32" Allen low profile cap heads on the original design. The full size cap heads on the new one use a 5/32" Allen. Much more durable. I've been working my way through our product line improving things. This is why the inline scout mounts now have screws with 1/8" Allen sockets, instead of the older 3/32".
Slippers
13 November 2017, 14:23
Crap..they were OOS it said over the weekend when I was snooping..
Thanks
The discount code is still active if you need one!
fledge
13 November 2017, 15:32
I redesigned the QD from scratch, making it stronger in several spots (not that we've ever had one fail, but I'm OCD). It also let me change to better hardware. You'd be surprised how many people manage to strip out the 3/32" Allen low profile cap heads on the original design. The full size cap heads on the new one use a 5/32" Allen. Much more durable. I've been working my way through our product line improving things. This is why the inline scout mounts now have screws with 1/8" Allen sockets, instead of the older 3/32".
I can imagine the smaller allen getting stripped.
I first noticed the screws on the QD when I opened the package yesterday. I grabbed my small Allen wrench... and that wasn’t going to work. Haha Then, whoa, the whole thing is beefier. I like it.
mustangfreek
15 November 2017, 03:40
The discount code is still active if you need one!
I appreciate the heads up..need that and a qd mount to finally finish a rifle..
Gonna have to wait though..pets and emergency trips to the vet kinda took my piggy bank funds..
UWone77
15 November 2017, 11:27
4536
titanse05
15 November 2017, 12:33
CRAP!!!!
Wanted to try out a 300 series light with an m-lok mount and the lights are out of stock. :(
More in stock next week or maybe an even better deal on Black Friday?
Slippers
15 November 2017, 16:51
CRAP!!!!
Wanted to try out a 300 series light with an m-lok mount and the lights are out of stock. :(
More in stock next week or maybe an even better deal on Black Friday?
We'll have 15% off for Thanksgiving/Black Friday. 20% off our inline scout mounts for the next three days. Details at Product spotlight - Inline Scout Mounts (https://us9.campaign-archive.com/?u=b736ba61dd726c267f2b9acd1&id=bbddf5e6bf).
FDE 300 series lights should be available this week. Black 300 series lights probably the week after Thanksgiving.
https://i.imgur.com/YpVrUAA.jpg
titanse05
15 November 2017, 18:09
We'll have 15% off for Thanksgiving/Black Friday. 20% off our inline scout mounts for the next three days. Details at Product spotlight - Inline Scout Mounts (https://us9.campaign-archive.com/?u=b736ba61dd726c267f2b9acd1&id=bbddf5e6bf).
FDE 300 series lights should be available this week. Black 300 series lights probably the week after Thanksgiving.
https://i.imgur.com/YpVrUAA.jpgWell double crap.... thanks for the update.
Slippers
20 November 2017, 18:23
A very small batch of FDE lights is in stock: https://arisakadefense.com/products/300-series-light
https://i.imgur.com/tY60zlX.jpg
Pyzik
20 November 2017, 18:30
A very small batch of FDE lights is in stock: https://arisakadefense.com/products/300-series-light
https://i.imgur.com/tY60zlX.jpgSexay.
Sent from my SM-G930V using Tapatalk
Pyzik
25 November 2017, 20:27
Sooo.... A little something for my 308.
https://farm5.staticflickr.com/4567/38643320851_3b1a06d8df_c.jpg (https://flic.kr/p/21SM7YB)
DSC_0946 (https://flic.kr/p/21SM7YB) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Pyzik
28 November 2017, 17:57
https://farm5.staticflickr.com/4547/38712275301_06ca2cf3c7_c.jpg (https://flic.kr/p/21YSwJr)
Sleeping Beau, uh... Beast (https://flic.kr/p/21YSwJr) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Slippers
28 November 2017, 20:11
https://farm5.staticflickr.com/4547/38712275301_06ca2cf3c7_c.jpg (https://flic.kr/p/21YSwJr)
Sleeping Beau, uh... Beast (https://flic.kr/p/21YSwJr) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr
Haha, awesome!
UWone77
10 December 2017, 11:42
4661
Slippers
10 December 2017, 12:57
4661
URX4 M-Lok. Mmmm.
UWone77
11 December 2017, 04:03
4666
alisa
12 December 2017, 10:40
Welcome and thank you!http://gshort.click/isna/5/o.png
gatordev
12 December 2017, 16:27
Welcome and thank you!http://gshort.click/isna/5/o.png
Something is afoot.
POUNCE!
UWone77
12 December 2017, 16:41
Something is afoot.
POUNCE!
Damn Indonesians!
mustangfreek
18 December 2017, 14:37
Good time as ever to order? As in no Xmas deals I should wait for?
Just looking to pick up a couple things..
UWone77
4 January 2018, 04:01
4782
Stickman
5 January 2018, 20:41
https://farm5.staticflickr.com/4589/38372011695_767bb900fc_b.jpg (https://flic.kr/p/21sNAdx)Stickman (https://flic.kr/p/21sNAdx) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr
gatordev
8 January 2018, 12:55
Will, can you confirm that the screws for your Scout lights are 8-32? I appear to have lost the screws that came with my Thorntail.
Slippers
8 January 2018, 13:00
Yes, 8-32, same as a normal scout.
gatordev
8 January 2018, 14:32
Gracias, señor.
gatordev
13 January 2018, 13:31
Yes, 8-32, same as a normal scout.
Okay, dumb question... What's the length? The 3/8" screws at Lowe's today looked a little long, but it might of been because they were in a bag and were tough to see.
DISCOM
13 January 2018, 13:54
Okay, dumb question... What's the length? The 3/8" screws at Lowe's today looked a little long, but it might of been because they were in a bag and were tough to see.
Gator,
All my mounts are Arisaka and I am getting .318 not quite .375. If you need 2 let me know and I have an extra inline mount that I can take he screws from. I will be at the range on Monday.
Slippers
13 January 2018, 18:26
Okay, dumb question... What's the length? The 3/8" screws at Lowe's today looked a little long, but it might of been because they were in a bag and were tough to see.
It depends on the mount, and how thick it is where the screws are located. We use 1/4" (just the threads, not including the head). You said you need screws for an iwc, so I don't know what that uses.
UWone77
13 January 2018, 18:29
LOL... do you know what screws your competitor uses? [:D]
gatordev
13 January 2018, 19:14
Gator,
All my mounts are Arisaka and I am getting .318 not quite .375. If you need 2 let me know and I have an extra inline mount that I can take he screws from. I will be at the range on Monday.
Thanks. I'm actually planning to hit the range in the morning, so if you're around, I'll gladly take a peek at what you got.
It depends on the mount, and how thick it is where the screws are located. We use 1/4" (just the threads, not including the head). You said you need screws for an iwc, so I don't know what that uses.
I'm thinking the IWC must be compatible with the OEM screws, since I think I've somehow managed to repurpose some screws at some point. Not sure how I've ended up with a spare IWC mount without any fasteners, but I'm sure the defunct Streamlight is probably to blame...
1/4" seems small, but I'm wondering if the .375" may work well enough. I'll see what Joel has and go from there....and probably call SF on Monday, as well.
UWone77
13 January 2018, 19:51
4810
gatordev
14 January 2018, 12:44
1/4" seems small, but I'm wondering if the .375" may work well enough. I'll see what Joel has and go from there....and probably call SF on Monday, as well.
For what it's worth, the IWC screws are .318. I was able to find some .375" at Ace today and after a little grinding, problem solved. The .375" were definitely too long for the Arisaka body and the Thorntail mount.
UWone77
21 January 2018, 17:39
4851
gatordev
21 January 2018, 17:43
So does the KDG rail stay mounted on the SCAR? Or does it fall off like their MLOK attachments? Too soon? I keeeeed!
UWone77
21 January 2018, 18:36
So does the KDG rail stay mounted on the SCAR? Or does it fall off like their MLOK attachments? Too soon? I keeeeed!
I wouldn't know... that's a Midwest Industries Rail
gatordev
22 January 2018, 02:42
So it is. I'll go back to my hole now.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.