View Full Version : My complete spikes/spikes first build
Lkb513
31 October 2014, 18:09
Bought piece by piece.
http://i61.tinypic.com/2076amf.jpg
http://i62.tinypic.com/1072q80.jpg
Spikes lower
Spikes trigger guard
Spikes NiB battle trigger
Kns zombie green pins
Spikes buffer tube w/t2 buffer
Magpul asap
Magpul ctr stock
Magpul moe+ grip
Magpul bad lever
Spikes upper
Spikes bcg
Rainier raptor
Yhm black diamond spectre length handguard
Yhm low pro gas block
Adams arms voodoo 16" mid-length government contoured barrel
Rainier xtc
Magpul mbus
Magpul rvg
Not pictured is the american defense ad-68 with vortex strikefire.
Also pictured is my second build lower :P
Tried rotating the pictures but didn't work
Computalotapus
31 October 2014, 19:29
Clean build.
toolboxluis00200
31 October 2014, 20:52
now you need a BAR Rail
Billet KNS pins
Barking Spider2 Krink
spike tactical LW ambi safety levers
Spikes BUS
and you be done LOL
WHSmithIV
1 November 2014, 01:52
How do you like that Spike's trigger?
Lkb513
1 November 2014, 05:50
Clean build.
Thanks!
now you need a BAR Rail
Billet KNS pins
Barking Spider2 Krink
spike tactical LW ambi safety levers
Spikes BUS
and you be done LOL
That involves alot more money lol. I thought about changing a few things on the rifle. But then I just ended up getting another lower instead =P
How do you like that Spike's trigger?
I like it alot. It's pretty smooth. No grittyness to it at all! Definitely a step up from standard mil spec triggers! It's no geissele but for 65 bucks you won't be disappointed!
DutyUse
1 November 2014, 06:00
Nice build Lk! My first build was a spikes similar to this..it's to blame for my expensive addiction today
Lkb513
1 November 2014, 07:26
Nice build Lk! My first build was a spikes similar to this..it's to blame for my expensive addiction today
Thanks! Getting bit by the spikes spider can get costly :P
Ride4frnt
1 November 2014, 08:03
I like my spikes trigger. I added a jp reduced trigger spring and enhanced reliability hammer spring, and a trigger adjuster screw. Works flawlessly
Lkb513
1 November 2014, 08:26
I like my spikes trigger. I added a jp reduced trigger spring and enhanced reliability hammer spring, and a trigger adjuster screw. Works flawlessly
I've been curious about throwing in some jp springs. Is there a noticeable difference with the reduced spring?
Kopis
1 November 2014, 09:02
I've been curious about throwing in some jp springs. Is there a noticeable difference with the reduced spring?
Huge difference, best $10 you can spend on the gun. That being said, I just got a timney drop in trigger and it is amazing. Well worth the $.
Ride4frnt
1 November 2014, 09:16
Order a jp kit and a trigger adjuster screw from joe bobs and it will be 10x better
Lkb513
1 November 2014, 10:13
I'm looking into them as we speak! Thanks for pointing in the right direction!
Ride4frnt
1 November 2014, 10:25
These are what I have on mine.
http://www.joeboboutfitters.com/JP_Enterprises_AR_15_RELIABILITY_ENHANCED_REDUCED_ p/jp-jps3.5t.htm
http://www.joeboboutfitters.com/JoeBob_s_Trigger_Adjuster_p/jb-triggeradjuster.htm
Funny story about the adjuster screws. I was gonna order one on joe bobs. Then I noticed someone on my local forum was advertising them, so I contacted him. Turns out the guy who supply's joe bobs with the screws lives 5 minutes from me.
toolboxluis00200
1 November 2014, 10:55
Thanks!
That involves alot more money lol. I thought about changing a few things on the rifle. But then I just ended up getting another lower instead =P
I like it alot. It's pretty smooth. No grittyness to it at all! Definitely a step up from standard mil spec triggers! It's no geissele but for 65 bucks you won't be disappointed!
that is why GOD created credit cards LOL
Lkb513
1 November 2014, 11:15
These are what I have on mine.
http://www.joeboboutfitters.com/JP_Enterprises_AR_15_RELIABILITY_ENHANCED_REDUCED_ p/jp-jps3.5t.htm
http://www.joeboboutfitters.com/JoeBob_s_Trigger_Adjuster_p/jb-triggeradjuster.htm
Funny story about the adjuster screws. I was gonna order one on joe bobs. Then I noticed someone on my local forum was advertising them, so I contacted him. Turns out the guy who supply's joe bobs with the screws lives 5 minutes from me.
Awesome! Thanks for the links! Gonna pick these up on Fri =D
that is why GOD created credit cards LOL
Lol never had one and doubt I ever will! Seen too many people get into trouble with those things!
toolboxluis00200
1 November 2014, 11:31
i have one it has a credit of $1000 but i only use $100 lol i try very very hard not to pass that amount :)
Thompson
1 November 2014, 15:58
I like it alot. It's pretty smooth. No grittyness to it at all! Definitely a step up from standard mil spec triggers! It's no geissele but for 65 bucks you won't be disappointed!
Except you could get a Geissele for $65 [:)] (well ... the sister company - in other words, run by his wife). ALG makes the Adaptive Combat Trigger (ACT) for $65; breaks at around 6 lbs and has a really crisp reset like all other Geissele triggers (from what I've heard).
But hey; love the build! Hope you love it as much as how pretty it looks!
JoeBobOutfitters.com
1 November 2014, 23:26
These are what I have on mine.
http://www.joeboboutfitters.com/JP_Enterprises_AR_15_RELIABILITY_ENHANCED_REDUCED_ p/jp-jps3.5t.htm
http://www.joeboboutfitters.com/JoeBob_s_Trigger_Adjuster_p/jb-triggeradjuster.htm
Funny story about the adjuster screws. I was gonna order one on joe bobs. Then I noticed someone on my local forum was advertising them, so I contacted him. Turns out the guy who supply's joe bobs with the screws lives 5 minutes from me.
We don't currently buy the trigger adjusters from anyone in MD (although we did at one time).
OUR trigger adjusters are machined and threaded on a Swiss machine out of stainless bar-stock versus taking a standard machine screw and then drilling and threading it. The Swiss manufacturing gives very consistent results, although requires much greater quantities to be cost effective and a much more expensive piece of equipment.
For all intents and purposes, however, they accomplish the same thing.
Ride4frnt
2 November 2014, 08:10
We don't currently buy the trigger adjusters from anyone in MD (although we did at one time).
Well there ya have it. I haven't talked to him about it in a while, but I knew they were coming from him at one point. This was about 3 years ago or more id say.
Also, joebob, keep up the awesome work in everything you do! Every order I've ever placed has been a pleasure, and the FAST shipping and free tee shirt are added bonuses.
JoeBobOutfitters.com
2 November 2014, 09:07
Well there ya have it. I haven't talked to him about it in a while, but I knew they were coming from him at one point. This was about 3 years ago or more id say.
Also, joebob, keep up the awesome work in everything you do! Every order I've ever placed has been a pleasure, and the FAST shipping and free tee shirt are added bonuses.
Gotya. That timeline would be more accurate then.
Good to hear! Thanks for the orders.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.