PDA

View Full Version : LANTAC USA LA-R15 Billet Lower Receiver


GOST
17 January 2015, 09:32
Here's video of the laser engraving on the upcoming billet LA-R15 lower receiver.


http://www.youtube.com/watch?feature=player_detailpage&v=E00mQcJH84k

http://www.lantac-usa.com
GOST
17 January 2015, 09:37
Sneak peek.

https://fbcdn-photos-b-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-0/1554379_295536250601967_1327071166_n.jpg?efg=eyJpI joidCJ9&oh=4bb4e3142573a0bb43ed6b297154e975&oe=5530D8D0&__gda__=1433063220_7401f2db4f2f78596727bc25c2a9e0a d
Ride4frnt
17 January 2015, 10:07
Not huge on that gigantic white engraving.
GOST
17 January 2015, 10:19
I also personally don't care for laser etching. The laser engraving on the BAD-15 is quite nice though.
Thompson
17 January 2015, 11:18
I'm okay with the right side being etched - no so much the left ... purely from an aesthetics stand point that is.
CarbonScoring
17 January 2015, 14:05
The LANTAC is a bit big, but overall, I really like the look.
DutyUse
17 January 2015, 16:11
Reminds me a lot of the noveske G3 but more busy looking
Eric
17 January 2015, 20:21
Cool video, but the oversize print on the left side is fugley.
DutyUse
18 January 2015, 18:04
If I was a betting man I'd say after the initial batch of anticipated releases the wording will get smaller
GOST
18 January 2015, 18:07
If I was a betting man I'd say after the initial batch of anticipated releases the wording will get smaller

The large laser etching is consistent with Lantac UK.
okdonk
18 January 2015, 18:30
Approx price range?
GOST
18 January 2015, 18:32
Not seen a price yet, if I were speculating I'd guess it'll about the same as their UAR upper.
Gaspipeshooter
18 January 2015, 18:42
Even if it was made from Pixie Dust and Unicorn horn, I wouldn't buy one because of that FUGLY engraving...
ksenter
18 January 2015, 18:50
eh,
I'm in for Lantac products, but totally out for the GIGANTIC FREAKING ADVERTISEMENT!!!!!!!
GOST
18 January 2015, 18:58
Who knows maybe the finished product's laser etching won't be as big. VLTOR took the etching off the MUR.
DutyUse
18 January 2015, 19:05
Who knows maybe the finished product's laser etching won't be as big. VLTOR took the etching off the MUR.

I'm sure if it becomes a runaway hit they will cater to customer demands/trends
GOST
18 January 2015, 19:41
Current trend is Cerakoting, if that be the case the laser etching won't matter.
mustangfreek
18 January 2015, 19:43
Current trend is im always broke so no lantac goodies for me, so it won't matter. ..[BD]
GOST
23 January 2015, 11:00
This was on Lantac's Facebook page. Looks like a complete Lantac rifle.

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10891559_419593254862932_1825638389761321152_n.jpg ?oh=235df9be4650a3e958a5bcd9470b7f37&oe=5526C9CF&__gda__=1429100670_167c089f38da6951c3acc2ce51b8dd9 8
XACT_ABORT
23 January 2015, 18:29
It's probably stupid... Well I know it is. But there is some subtle bit about pretty much every Lantac part that I see that I just really dig. Pretty much comes down to stealth fighter like angles like that shell deflector on the upper, the beefy ass trigger guard on the lower.... That bcg is just stupid detailed. Usually the kind of things that I notice exclusively on cars that I can't afford (either).

Functionally probably doesn't mean squat to me for sure, but I like it. All of it.
CarbonScoring
23 January 2015, 18:49
That is one sexy rifle.