Naytwan
4 March 2015, 21:46
I picked up the Barking Spider 2 because I wanted one to replace the Troy claymore on my pistol but I didn’t want to do another KX3 or a KX5. I liked the idea it was modular. You can run it with the thread protector and it will look and operate like a Noveske Piggy brake (KX3/5), krink style break, you can run it with the included and effective 5 prong flash hider or you can run it with a muzzle brake (Dynacomp).
https://farm9.staticflickr.com/8621/16719552281_874108cc96_c.jpg
The muzzle device has an outside diameter of 1.4” with the thread protector in place and over all length of 2.2” without the TP and the inner cone piece in place. It is 2.97 with the cone and thread protector as well as 3.7” with the included flash hider.
https://farm9.staticflickr.com/8621/16694918416_b9ff978f8f_c.jpg
Comparing it to the noveske KX3 its both shorter and longer depending on how you configure it. It is also a little wider according to my calipers and measuring skills.
https://farm9.staticflickr.com/8590/16534688919_e5f1109167_c.jpg
As far as performance. It does what its supposed to do. Its noticeable how much lower the decibel level is behind the gun and the blast is non-existent. The flash from what I can tell was also very low. I forgot my tripod or I would have included video of the flash so you will have to take my word for it. I fired the gun with the center cone installed and the thread protector and it felt good. Just as the KX3 does. I then fired the gun without the center cone and boy was that an experience. I suddenly had a flame thrower in my hand. The fireball it spit was huge. I was using my usually Wolf gold 55g ammo and that was pretty cool. Again, wish I brought my tripod. I then put the brake bake together and fired the gun with the flash hider. The thing is very effective. No flash could be seen as far as I can tell. I asked someone else at the range to watch and they also reported no flash.
All in all I am happy with the purchase. One thing I did notice that seemed really interesting. The ejection pattern. The brake must add back pressure because it ejected nicely and consistently to the 2 O’Clock position. When I removed the cone it was very sporadic and I actually ended up getting a hot brass burn on my forearm from brass bouncing off the divider. With the cone installed the brass always went to the 2pm position and missed the divider. Thats good and bad. If I was a reloader I would have needed a brass catcher or all that brass would be unrecoverable without a range officer. I’m running it on the 10.5” Wevo Pistol 5000.
https://farm9.staticflickr.com/8621/16719552281_874108cc96_c.jpg
The muzzle device has an outside diameter of 1.4” with the thread protector in place and over all length of 2.2” without the TP and the inner cone piece in place. It is 2.97 with the cone and thread protector as well as 3.7” with the included flash hider.
https://farm9.staticflickr.com/8621/16694918416_b9ff978f8f_c.jpg
Comparing it to the noveske KX3 its both shorter and longer depending on how you configure it. It is also a little wider according to my calipers and measuring skills.
https://farm9.staticflickr.com/8590/16534688919_e5f1109167_c.jpg
As far as performance. It does what its supposed to do. Its noticeable how much lower the decibel level is behind the gun and the blast is non-existent. The flash from what I can tell was also very low. I forgot my tripod or I would have included video of the flash so you will have to take my word for it. I fired the gun with the center cone installed and the thread protector and it felt good. Just as the KX3 does. I then fired the gun without the center cone and boy was that an experience. I suddenly had a flame thrower in my hand. The fireball it spit was huge. I was using my usually Wolf gold 55g ammo and that was pretty cool. Again, wish I brought my tripod. I then put the brake bake together and fired the gun with the flash hider. The thing is very effective. No flash could be seen as far as I can tell. I asked someone else at the range to watch and they also reported no flash.
All in all I am happy with the purchase. One thing I did notice that seemed really interesting. The ejection pattern. The brake must add back pressure because it ejected nicely and consistently to the 2 O’Clock position. When I removed the cone it was very sporadic and I actually ended up getting a hot brass burn on my forearm from brass bouncing off the divider. With the cone installed the brass always went to the 2pm position and missed the divider. Thats good and bad. If I was a reloader I would have needed a brass catcher or all that brass would be unrecoverable without a range officer. I’m running it on the 10.5” Wevo Pistol 5000.