PDA

View Full Version : Bobro mounts 'for the win' !



gotm4
30 December 2008, 05:05
At Saturdays multi-gun match at Black Creek (Richmond, VA) I placed 1st place [:D]. The two rifles with optics I used for the match each had a Bobro mount. Each was removed at least twice at the match from the gun to demo the mount to the other shooters. I even put the scope on another guys rifle to show how it auto-adjusts to any picatinny rail.

The Black Creek multi-gun match is always 3 stages. Stage one you can you loud rifles like my 3gun rifle. On stages 2 and 3 (for noise concerns) you must use a .22 caliber rifle, pistol caliber AR or a suppressed AR. I always use a suppressed AR.

Happy New Year!
Robb

These are the four guns I used at the match.
http://img.photobucket.com/albums/v408/gotm4/racegun.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/sbrs24.jpg
http://img.photobucket.com/albums/v408/gotm4/hatfieldgunsmiffin/3gunguns14.jpg
http://img.photobucket.com/albums/v408/gotm4/gunpics/MP9L-1.jpg

Eric
30 December 2008, 05:56
Congrats on the 1st Place Robb and nice blasters! I've been impressed with the Bobro mount I'm using as well.

Stickman
30 December 2008, 07:24
Congratulations on placing first.

My biggest complaint with the Bobro mount is that I don't have a scope to throw in it. [BD]

Trace Rinaldi
30 December 2008, 13:04
Great looking rifles, and everything else.. The mounts look very solid.
Congrats on the good shootin too!

UDT
30 December 2008, 13:41
Congtars, on the win. Nice guns also!

parabellum
30 December 2008, 21:41
good shootin Rob.

i like the idea of the auto-adjust levers on the BOBRO units. is an Aimpoint Micro mount in the works?

all my BOBRO gear (vert grips and bipod) are top notch and would love to try the mounts some day. i think its the only mount that could get me to quit the LT kool aid

BOBRO
31 December 2008, 08:29
Congratulations, Robb!

I am sincerely grateful for all of the support, and the crew at BOBRO are totally stoked that you are using our equipment with confidence.

Thanks again for the valuable input during our prototyping and development stages.

Awesome shooting-

Andrew Bobro-

45R
7 February 2009, 05:42
Rob what is this auto-adjusting feature you speak of?

45R

gotm4
7 February 2009, 19:03
Unlike a ADM or LaRue mount that you must make work with a particular upper a Bobro mount adjusts itself to the upper where you're using it. All you do is tighten it down until the lever locks down. It self adjusts. With LaRue you need their wrench. With ADM you'll either need a bladed screwdriver (old models) or you'll take a minute or so to adjust the tension by hand. With Bobro all you do is install it and lock the lever down. Once on it's done, nothing else is required.................PURE GENIUS! [:D]