Minuteman/Pro-Tech TR4 built to raise funds for Special Operations Warrior Foundation

[Thomas Carey]

First up I want to state that I am posting this with kind permission of the sites Admin.

My small company Minuteman Watch Co in conjunction with the fine folks at Pro-Tech knives. Is working to raise funds for Special Operations Warrior Foundation http://www.specialops.org/ via the sale of our Minuteman/Pro-Tech TR4.

The knife is proudly made in the USA by Pro-Tech knives and can be purchased here. http://minutemanwatches.com/knives/minutemanpro-tech-tr4-manual

25% of the profit from each one sold will go to Special Operations Warrior Foundation.

Made in the USA by Pro-Tech knives for Minuteman Watch Co.
Manual open
Plunge Lock
Handle: T6 6061 Aluminum anodized Flat Dark Earth
Blade Steel: 154-CM Stainless Steel
Blade Coating: DLC black coated by Ionbond
Blade Length: 4 inch
Blade Width: 1.35 inch
Blade Thickness: .125 inch
Closed Length: 5.25 inch
Overall Length: 9.25 inch
Weight: 5.5 oz.
Knife Includes: Skull lanyard and Nylon sheath

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xta1/t31.0-8/s2048x2048/11187160_674443662660274_6839401400340190031_o.jpg

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xap1/t31.0-8/s2048x2048/10477774_674443675993606_9104482149946018821_o.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/s2048x2048/10687901_674443719326935_7575186419151449468_o.jpg

[UWone77]

Yes, you have our blessing. Good luck with your fund raiser!

[Thomas Carey]

Thanks so much for the kind welcome. [:D]

Here is some info we would like to share about these knives from our friends at Pro-Tech Knives.

"Frame is 6061 T6 aircraft grade aluminum. Like ALL Pro-Tech knives we start with blocks of metal and machine everything in house.
Full four inch Blade is 154-CM
The skull is sterling silver and is based on a Bruce Shaw hand carved skull knife that was on the front cover of Tactical Knives magazine a couple of years ago.
At the back end we feature the glass breaker/lanyard pass through. That piece is full hard stainless steel and was tested by US Marines on breaking Hummer windows out.
Custom skull lanyard also USA Made by our friends at Schmuckatelli company here in CA."

[Cotton68spc]

That is one beast of a blade


Check me out on YouTube and Facebook

[Thomas Carey]

We still have about 30 of these left which we can offer. We've had a bit of a challenge in getting the word out about our effort. So we sure would appreciate it if you fine folks would help us spread the word about our humble effort.

[Thomas Carey]

I just wanted to share this video which aired on The Blaze TV 5/14/2015 of note is the fact that the presenter did not quite get the name of the charity correct.

https://www.youtube.com/watch?v=_0qFASbTisI

[Thomas Carey]

Here is an update. These have been well received especially by the audience of Glenn Beck's TV show. So we now have just 20 left which we can now offer. For those of you who purchased one or told you friends about our humble efforts we thank you.



http://minutemanwatches.com/knives/minutemanpro-tech-tr4-manual